Create Data Source Module using OMB
I am not seeing how to create Data Source modules using OMB. I am assuming there is a property of OMBCREATE ORACLE_MODULE that I am overlooking. If anyone can provide assistance, it would be greatly appreciated.
Thanks,
craig
Hi,
Yes, there is a OMBCREATE command for creating Oracle Modules. And as per the Scripting ref Guide ( Page 4-157 owb 9i scripting guide) -
OMBCREATE ORACLE_MODULE 'src_module' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME) VALUES ('this is an Oracle module', 'source module') This will create an Oracle module named "src_module", its description is "this is an Oracle module", and business name is "source module".
HTH
Mahesh
Similar Messages
-
About creating data source(urgent)
Hi,
I am abap developer. i don't know much about crm.
our requirement is :
i need to create one infoset in sap r/3.
we want to use that infoset in crm server to create data source.
we use transaction code : CRMD_MKTDS
We specify these values.
Origin Type
RFC Destination
InfoSet
Description
businee pastner
But we are not getting any infoset from r/3 server.
we are getting only crm infoset.
I check RFC Destination. Its working fine.
It gives me error : InfoSet ztest either does not exist or has not yet been generated
Thanks,
JackHi,
You can get the data using a db link and the proc is as follows..
CREATE DATABASE LINK OTHERDATABASE ...;
CREATE TABLE XXXX
AS
SELECT * FROM TBL@OTHERDATABASE ;
Good Luck,
Siva -
Create data source in BI 7.0?
hi,
while creating data source in BI 7.0 , ( from flat file data)
under extraction tab:
character set settings : default and direct entry is there
if i select direct entry i am getting character set and replacement character.
what scenerio we use direct entry and what scenerio we use default. if i select direct entry what is effect for my output.
please clarify.
regards
ss<b>System Default or Fixed Entry</b>
If you choose <b>Default Setting</b> for the character set, in Unicode systems a file in UTF-8 format is expected, in non-Unicode systems a file in the format of the system code page is expected.
If you choose <b>Direct Input</b> for the character set, you can select an SAP character set and determine a replacement character, in case errors occur while converting to the system character set.
<b>SAP Character Set ID</b>
The 4-character name of an SAP character set as defined in SAP character set maintenance.
The following explains the naming convention in more detail:
First digit: Code
0 EBCDIC character sets
1 ASCII character sets
2 mixed single byte / double byte character sets
4 double-byte character sets
6 mixed character sets
8 double byte and multibyte character sets
9 reserved for code pages you define
Second digit: Country
1-3 countries that use the Latin alphabet (Western Europe, North and South America, Australia, Africa)
4-6 countries that use non-Latin alphabets and writing systems (Eastern Europe, Asia, Arabic countries in Africa)
7-9 reserved for special languages
Third and fourth digits: Sequential number
Example
0100 IBM 00697/00273 (Latin 1 - Germany/Austria)
0401 SNI BS2000 8859-5 EHCLC (cyrillic - multiple languages) -
Not enough memory for Data Provider-Error while creating Data Source
Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object. -
Service Check Data Source Module Events
Hello,
I seem to keep having this alert the event number is 11771, i could really use some help here on how to fix this issue if possible.... these errors are being generated from SCE BY SCE
Thanks,
Danny
Date and Time:
2/4/2010 5:19:14 AM
Log Name:
Operations Manager
Source:
Health Service Modules
Generating Rule:
Collect Service Check Data Source Module Events
Event Number:
11771
Level:
Warning
Logging Computer:
sce01.xxxxxx.com
User:
N/A
Description:
Error getting state of service
Error: 0x8007007b
Details: The filename, directory name, or volume label syntax is incorrect.
One or more workflows were affected by this.
Workflow name: Microsoft.SQLServer.2008.DBEngine.FullTextSearchServiceMonitor
Instance name: ESSENTIALS
Instance ID: {023CAC69-7B83-207A-5F48-D808815B4919}
Management group: SCE01_MG
Event Data:
View Event Data
< DataItem type =" System.XmlData " time =" 2010-02-04T05:19:14.0140371-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SQLServer.2008.DBEngine.FullTextSearchServiceMonitor </ Data >
< Data > ESSENTIALS </ Data >
< Data > {023CAC69-7B83-207A-5F48-D808815B4919} </ Data >
< Data > 0x8007007b </ Data >
< Data > The filename, directory name, or volume label syntax is incorrect. </ Data >
</ EventData >
</ DataItem >also here's this weeks critical errors from SCE by SCE
Date and Time: 2/24/2010 9:55:44 AM
Log Name: Application
Source: Windows Server Update Services
Event Number: 13002
Level: 1
Logging Computer: sce01.xxxxxxxxxx.com
User: N/A
Description:
Client computers are installing updates with a higher than 25 percent failure rate. This is not normal.
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T09:55:44.1666165-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > Client computers are installing updates with a higher than 25 percent failure rate. This is not normal. </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 4:25:43 PM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 11852
Level: 2
Logging Computer: sce01.xxxxxxxxxxxxxxxx.com
User: N/A
Description:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error : Login timeout expired Workflow name: Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor Instance name: sce01.xxxxxxxxxxx.com Instance ID: {5B7CC866-45FF-A2AE-8D33-0AC661F68861} Management group: SCE01_MG
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T16:25:54.2642632-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor </ Data >
< Data > sce01.xxxxxxxxxxx.com </ Data >
< Data > {5B7CC866-45FF-A2AE-8D33-0AC661F68861} </ Data >
< Data > Login timeout expired </ Data >
< Data > 0x80004005 </ Data >
< Data > Unspecified error </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 10:47:13 AM
Log Name: Operations Manager
Source: Health Service Script
Event Number: 4001
Level: 1
Logging Computer: sce01.xxxxxxxxxxxxxxx.com
User: N/A
Description:
GetSQL2008BlockingSPIDs.vbs : Cannot login to database [sce01.xxxxxxxxxxxxxxx.com][ESSENTIALS:master] .
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T10:47:15.8121021-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > GetSQL2008BlockingSPIDs.vbs </ Data >
< Data > Cannot login to database [sce01.xxxxxxxxxxxxx.com][ESSENTIALS:master] . </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 10:46:05 AM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 11852
Level: 2
Logging Computer: sce01.xxxxxxxxxxxx.com
User: N/A
Description:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error : [DBNETLIB][ConnectionOpen (PreLoginHandshake()).]General network error. Check your network documentation. Workflow name: Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor Instance name: sce01.xxxxxxxxxxxxx.com Instance ID: {5B7CC866-45FF-A2AE-8D33-0AC661F68861} Management group: SCE01_MG
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T10:47:14.1579111-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor </ Data >
< Data > sce01.xxxxxxxxxxxxxxxxxxx.com </ Data >
< Data > {5B7CC866-45FF-A2AE-8D33-0AC661F68861} </ Data >
< Data > [DBNETLIB][ConnectionOpen (PreLoginHandshake()).]General network error. Check your network documentation. </ Data >
< Data > 0x80004005 </ Data >
< Data > Unspecified error </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 3:50:12 PM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 31400
Level: 1
Logging Computer: sce01.xxxxxxxxxxxx.com
User: N/A
Description:
An exception occured processing a group membership rule. The rule will be unloaded. Subscription ID: 1ac6ba80-bb85-4699-82a2-f3c584b06965 Rule ID: bb91657f-32db-4f72-2ed6-e7ac94f0e167 Group ID: b20e0f37-c8d3-afcc-e21e-473b019fd826 Group type name: Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group Exception: Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_CE6F4AC6_0A15_BE42_323A_65A3BC8AB307 at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager) at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues) at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType() at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection)
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T15:50:12.2844774-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > 1ac6ba80-bb85-4699-82a2-f3c584b06965 </ Data >
< Data > bb91657f-32db-4f72-2ed6-e7ac94f0e167 </ Data >
< Data > b20e0f37-c8d3-afcc-e21e-473b019fd826 </ Data >
< Data > Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group </ Data >
< Data > Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_CE6F4AC6_0A15_BE42_323A_65A3BC8AB307 at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager) at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues) at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType() at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection) </ Data >
</ EventData >
</ DataItem > -
Newbie Question: Creating Data Sources
Our current Hyperion setup consists of the Hyperion 9.3 client that users access via a terminal server. We are trying to get the web version of Hyperion running.
I installed some base components of the Oracle Enterprise Performance Management System (11.1.1.2.0.940). It all starts fine and I can login with admin, but I do not see how to create data sources or load .bqy query files. If I create a new interactive reporting document, it makes me choose a Data Source from the virtual directory in which I do not have one. if I try to import one, or import a .bqy file, I browse to the file, select it, then always get a "File path is wrong." error. I also found how to create Data Sources using the CMC, but I do not see how to reference these. What am I doing wrong?.HI,
What version of Hyperion planning are you using version 9.3 or epm11.1?
Because they have different ways of creating datasources.
In version 9.3 you can create datsource in the configuration utility.
While in version 11 you need to create planning application first before creating datasource either by classince planning application or epm.
Thanks,
Hanson -
We have been seeing this error in the Operations Manager Event Log for quite a while.
Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: MMEA_1348391424
Instance name: aaa.bbb.com
Instance ID: {88AED57C-5627-0C0B-E5C1-A9176A7E64CD}
Management group: SCOMr2
I haven't been able to spot any network outage on the management servers, or the database servers to indicate a problem. It usually happens at night, and when I look at the health explorer, the entity is healthy.
Please would someone help me in finding the root cause of this issue and what can be done to avoid it.
There were no backups running when this alert was generated. As far as I'm aware, everything was idle.
I would appreciate any help.
KaranException Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
Based on the Error it seems the below for me
1. Either SCOM is unable to connect to the operationsmanager / operationsmanagerDW for its transactions on subscriptions
2. Or the SMTP server which your SCOM is using to relay emails has closed the connection.
So my suggestion would be you check the above for issues.
Gautam.75801
There were no network hiccups that I can see. Minimal disk activity. I've looked for any signs of database load, and haven't seen anything that jumps out.
Emails were going through just fine. These alerts get emailed to me, and if the SMTP server is 'closed' SCOM is usually quite sensitive and alerts about that too. I've seen it.
KB -
Create data source programmatically
hi,
i am doing a project that basically programmatically create a data source connection using ODBC. Is that any way that i could do that??I want to do this way 2 way
do you want to connect to a ODBC data source without using a user or system DSN configured by the ODBC Data Source control panel?
i am trying if i could use the Data Source Method in javax.sql to create a data source automatically when the program is run.
Am i correct to use this method?
import java.sql.*;
import java.awt.*;
import javax.swing.*;
import javax.naming.*;
import javax.sql.*;
public class TestingDatabase
public static void main(String[] args)
Connection connect = null;
try
Context ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup("");
connect = ds.getConnection();
System.out.println("connection is successful");
}catch(Exception e)
//write to log
e.printStackTrace();
System.out.println("Connection is not successful" + e.toString()); -
Urgent help: how to create data source for Weblogic RMI driver
Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhatDataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat -
Urgent help: how to create data source for Weblogic T3 driver
Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhatHi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat -
HOW TO CREATE DATA SOURCE FOR MAXDB
hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
GuruThe following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm -
Can we set the dynamic data source when using getReportParameters() ?
Hello!
I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
Regards,
Stephaniereport_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
This should load the saved report identified by report_id and you can get rid of javascript
Regards,
Vishal
http://obiee-oracledb.blogspot.com
http://www.packtpub.com/oracle-apex-4-2-reporting/book
Kindly mark the reply as helpful/correct if it solves your problem -
Alert subscription data source module encountered errors while running
Hello All,
After I configured subscriptions with many monitors, error alerts appear at SCOM(scom 2012 r2) console in active alert page.
I googled it and found some topics at TechNet but I could not figure it out. Alert description is shown below
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: The incoming request has too many parameters. The server supports a maximum of 2100 parameters. Reduce the number of parameters and resend the request.
One or more workflows were affected by this.
Workflow name: Subscriptioneaa7b044_b3c1_4198_be71_ffaaf66a163f
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: STS
Any idea?
ThanksAs I understand, this issue occurs and remains after I configure a subscription with too many rules and/or monitors( i.e al available rule and/or monitor of a management pack).
After I had deleted those subscription with many rule/monitor, this issue was resolved.
Any idea? -
Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks LanceHi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Want to check which data source is used by the composites
HI All,
I have a requirement here in which i want to see that which data source is used by the composites deployed on SOA.
I dont have the code.
Is there any quick way to do it(from console or backend without downloading the code)
ThanksYou can export the jar file from the EM console.
1) Login to EM console
2) Right click on the composite and select Export and With default options click on Export button
Find the data source name from the exported code.
Mark the posting appropriately as "helpful" or "correct answer", if your issue is solved.
Regards
Albin I
[http://albinsblog.com/]
Maybe you are looking for
-
PLEASE HELP!!! MY Family has resided in ct. usa, zurich,Switzer., & now Malibu, CA We've been with Apple since 1994. all itune have gone over [email protected] Now we're in Malibu, CA with latest macbook pros and ipads. I can't deauthorize or then au
-
Center text in table column expanding and distorting side columns
Anyone out there that can help me with this, I would appreciate it. I've created the table for this web page in photoshop and sliced it up. The center column is were the body of the text is displayed as you can see from the screen shot. The body text
-
How to load word .doc-files into java applications?
Hi, I want to load a word .doc-file (or any other type of document) into a java application, as part of the application. Is there any java special library to do it? Any solution or hint? Thank you.
-
Is there any way i can plug my Laptop into my Tv Screen?
-
Suppress xmlns:.. in the output
I try to use extension for using a Java class. I have add xmlns:ptg="http://www.oracle.com/XSL/Transform/java/oracle.XSLJav a". The problem is I want to supress the namespace in the output. Ex. Now I get the xmlns:ptg... (see below). How should I do