About file to file scenario

In file to file scenario i got an error in the communication channel like
Sender Adapter v2703 for Party '', Service 'FILE2FILE50872_SEN_BS':
Configured at 2008-02-14 02:33:17 IST
History:
- 2008-02-14 21:44:50 IST: Retry interval started. Length: 10.000 s
- 2008-02-14 21:44:50 IST: Error: No suitable sender agreement found
- 2008-02-14 21:44:40 IST: Error: No suitable sender agreement found
- 2008-02-14 21:44:30 IST: Error: No suitable sender agreement found
- 2008-02-14 21:44:20 IST: Error: No suitable sender agreement found
By using IS i created the CS. I deleted the Sender aggrement and again manually created, still i got the same error.

Hi Venkat,
Do a cahce refresh and see whether error has come gone or not.
Did you activate the changelists?
Ranjeet Singh.

Similar Messages

About FILE to IDOC scenario

Hi Experts,
i need some help for doing file to idoc scenario.
1. what are the configurations we must do while doing this scenario?
2. How to communicate with Legacy system to sap system?
3. How to create the business and logical systems for SAP systems in SLD?
4. How to define parameters in communcation in ID?
5. what work shold be done using SM59 and WE20? and specify the steps please?
6. finally if u having word file please send from the creation of logical system for sap system?
thanx.

Go thru below mentioned links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
once you go thru them you will find answers for questions.
thanks,
Venkat

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Partner Profile for file to IDOC scenario

Hi experts,
I am doing file to Idoc scenario. I did the ALE configuration steps between XI and r/3. For sender (ThirdParty) system, I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
Thanks
Manoj

Hi,
>>I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
in most cases you will only use one logical system in WE20
this will be XI's logical system - and you can route all the traffic
via this logicail system - this is the most popular case
for more about IDOCs and XI have a look at my book:
Mastering IDoc Business Scenarios with the SAP XI
http://www.sap-press.com/product.cfm?account=&product=H1935
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ

File to File multiple scenario without mapping

Hi
I am doing one simple file to file scenario without mapping i.e picking file from sender directory and then placing it in receiver directory via FTP.
Now i have to take two files from different directories and place them in to different directories in the receiver side.
On the sender side i have selected Advanced selection for source file and maintained the sceond directory name and filename.
now i am not aware about the reciver side that how to place the two files in to different directories.
I have to make only one interface for this.
Thanks in advance.

u have to follow the code in the link provided above but with some manipulations...
in case u r placing the files in different target dir depending upon the source directory then ur code will be something like this:
Note: i dont have a system as of now..so cant able to check the code for syntax errors..please cross check it
MessagePropertyKey mpk = new MessagePropertyKey("Directory","http://sap.com/xi/XI/System/File");
String SourceDir = msg.getMessageProperty(mpk);
if(SourceDir.equals("/SourceDirectory1"))
String targetDir1 = "/TargetDirectory1"
msg.setMessageProperty("http://sap.com/xi/XI/System/File","Directory",targetDir1);
else if(SourceDir.equals("/SourceDirectory2"))
String targetDir1 = "/TargetDirectory2"
msg.setMessageProperty("http://sap.com/xi/XI/System/File","Directory",targetDir2);
else
http://help.sap.com/javadocs/pi/SP3/xpi/com/sap/engine/interfaces/messaging/api/Message.html#getMessageProperty(com.sap.engine.interfaces.messaging.api.MessagePropertyKey)
lIbraries for adapter module development:
http://wiki.sdn.sap.com/wiki/display/XI/Where%20to%20get%20the%20libraries%20for%20XI%20development
How to develop adapter module:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?QuickLink=index&overridelayout=true

Error in File-XI-JDBC Scenario

Dear All,
I am working on File-XI-JDBC scenario which is using stored procedure (SP_UPDATE). When I am processing the file it is giving me the following error in the message monitoring:
Unable to execute statement for table or stored procedure. 'SP_UPDATE' (Structure 'Statement') due to java.sql.SQLException: ERROR: Invalid XML document format for stored procedure: 'type="<SQL-type>"' attribute is missing for element 'access' (Setting a SQL-type (e.g. INTEGER, CHAR, DATE etc.) is mandatory !)
Please guide me what is this error all about and how this can be resolved.
Warm Regards,
N.Jain

Dear All,
Now, I am able to update the SQL Server database but only one record is coming at the target. Can anyone please guide me what is he error in my Data types o in my mappings. Following is the source Data Type:
MT_TEST_FILE_T179T      1..1     DT_TEST_FILE_T179T
     ROOT                         1..unbounded
        PRODH                    1..unbounded     xsd:string
        VTEXT                      1..unbounded     xsd:string
        DATUM                     1..unbounded     xsd:string
Following is the target Data Type:
MT_TEST_JDBC_T179T      1..1     DT_TEST_JDBC_T179T
     STATEMENT                1..1
        SP_UPDATE             1..1
            action                    required     xsd:string
            TABLE                  1..1                     xsd:string
                PRODH             1..unbounded     xsd:string
                   type               optional            xsd:string
                VTEXT               1..unbounded     xsd:string
                   type               optional            xsd:string
                DATUM              1..unbounded     xsd:string
                   type               optional            xsd:string
Following are the mappings done:
EXECUTE-->@action
storedprocedurename-->TABLE
PRODH-->PRODH
VTEXT-->VTEXT
DATUM-->DATUM
CHAR-->@type.
With this stucture and mapping i am able to insert only one recored in the database even though there are multiple entries in the file.
Please guide me in solving this error so that multiple records can be inserted.
Warm Regards,
N.Jain

How to get Idoc acknowledgment in File to Idoc scenario

Hi All,
Please give suggestions about the below mentioned scenario:
Scenario: FileXI- ECC - Data from File is converted to various IDocs and posted in SAP. (No BPM used)
Problem: Exception Handling > > We want a message back from SAP system telling us that out of 100 IDocs that were sent, n were posted successfully and rest failed along with the error description. How can this be achieved?
Regards,
XIer

Pls go thruough these links also
Please see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
unable to import from SLD
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
<b>IDOC Acknowledgements</b>
R/3 IDOC ->XI-> ORACLE Error Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
Regards
Abhishek Agrahari

Sync File to SOAP scenario

Hey guys
i m doing a Sycn FIle to SOAP scenario(i guess i need BPM for that,right?)
lemme know if my configuration is correct
For sender FIle:
DT_sender,MT_sender,MI_sender,AI_sender(async)
For SOAP
DT_soap,MT_soap,MI_soap,AI_soap(sync)
For Receiver file
DT_receiver,MT_receiver,MI_receiver,AI_receiver.
and BPM would be
start>>Receive>>Sync send>>send>>stop
and ofcourse i need to import the WSDL for the webservice.
is this all,or i need to do some other designing too?
thanx
ahmad

Ahmad,
The weblog says you are sending a request from R3 using RFC. Then it gives back you the response from the webservice.
So first you have two scenarios:
Request:
Source: No datatype needed because you are importing the RFC.
Target: For this you need the datatype. Just create the datatype what he has mentioned.
Response:
Source : Just copy and paste the xsd. You import as an external definiton.
Target: Since your RFC is a synchrounous you will have the response for it. That is your target.
Then after that you do message mappings for request and response and then the interface mapping.
You dont need to have BPM for this interface. So dont worry about BPM for this interface.
Then you complete all the steps given in his weblog2. Then test it out.
---Satish

File to SOAP scenario question???

Hi,experts
let's take source system is A,target system is B.
I have a File to soap scenario using BPM,the scenario is send file request(from A) to PI,PI will be communicating target system(B) with soap(syn).After that, PI receives the soap response and send the response data to A.
Now the requirement is, we need to archive the file request msg(before sending to B) to a folder and archive the response msg(response from B) to a folder as well.how could it be achived?
any help will be much appreciated!
Thanks

Hello Rajesh_V2009 ,
I am trying to implement exactly the same pi scenario, but having some problems :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
<pns:name1>ajeet</pns:name1>
<pns:name2>phadnis</pns:name2>
</pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked 
Hoping to get help from you,
Cheers,
Ajeet Phadnis

File to JDBC Scenario using stored procedure Question

Does anyone have an aswer (or have you seen a Blog that covers it) to the problem of having to do a table refresh before doing inserts in a file 2 jdbc scenario?
Essentially the details are as follows:
I have an input file that has all the data for a table (it's a complete table dump) of lets say userdata (username, name, hiredate).
I need to pass that to an oracle database via stored procedure(s). But before I start issuing my insert (via insert stored procedure) I have to somehow issue a delete statement to delete all the contents of the table I'm about to update. I'm on XI 3.0 and aren't sure what the best solution to this may be.
Again if there is a blog that covers this then if you could point me in that direction it would be great. Otherwise if anyone has any good ideas it would be appreciated.

Hi,
For structure refer this blog..
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Use two <Statement> tags as shown here and there you may have separate tablenames.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
Thanks,
Jogula Ramesh

File RFC sync scenario error: MsgId alredy exists in the system

Hi,
I am working on File RFC sysnc scenario.
The first message that I tried to processed gave a error
com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Date ' ' has a wrong format at field REQ_DATE_H: Unparseable date: " "
When I retried correcting the data, it started giving strange error
Message ID 62D07CA0D3EE11DCCD36DA01C52F0606 for pipeline CENTRAL, version already exists in system.
How to rectify this?
XI version is PI 7.0 SP10

Nisar,
Which program to re-run? Are you talking about activating the channel again? If so, then I have done it many times changing the file name.
I got below error in Communication Channel Monitoring:
2008-02-06 02:27:39 Error Received XI System Error. ErrorCode: MSGGUID_EXISTING ErrorText: ErrorStack: Message ID 83F8B0B0D48311DCA544DA01C52F0606 for pipeline CENTRAL, version already exists in system
2008-02-06 02:27:39 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error Transmitting the message using connection http://xibox:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error The message status set to FAIL.
2008-02-06 02:27:39 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException

Help in file to RFC scenario

hey guys i m doing a File to RFC scenario using BPM and taking help from the following blog /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit i m a bit confused about the services being used in figure 19 and figure 20,for a File to RFC(sync) scenario,do i need to have 2 business systems,one of WEB as ABAP and one of third party?
why is he using two different services in figure 19 and 20.
thanx
ahmad

Dear Bhavesh,
Someone earlier told me via SDN that, it is mandatory to create a WEB AS ABAP business system for any SAP system running on ABAP stack participating in the integration scenario. If the above is true than Ahmad needs to create one WEBAS ABAP business system for the R/3 end
also a third party business system or a business service for file system.
Pls advice.
Regards,
Ashish

A how-To guide about splitting import files exists?

Hi All,
in his Webinar https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/409e4529-adbc-2a10-4d9b-e8fade570414
Klaus David said a "A how-To guide about splitting import files exists" (Page 20).
Can anybody tell me where to find this guide?
Please mail to becker.roman ( at ) web . de
Best regards
Roman

I found the link here, if you are still looking.
I didnot check the contents yet but the title says
MDM 5.5 SP06 - IT Scenario Configuration Guide -
https://websmp202.sap-ag.de/~sapidb/011000358700001119482007E
Thanks
Satya

How to execute a scenario File to File with SAP XI ?

Hi all,
I'm starting study SAP XI, i see in the link follow:
[http://www.****************/Tutorials/XI/File2File/page8.htm]
a scenario to exchange file to file with SAP XI.
After designing and configuration everything (same as tutorial of this scenario), i don't known how to execute this scenario.
Anyone can answer my question: how to execute this scenario file to file?
Please see the link below to understand more about this scenario.
Thanks all a lot in advance,
Point will be reward for any valuable answer.
Vinh Vo

Hi Vinh,
Hope u read all the basic documents of the XI, if not please go through once u wil come to know how to execute a scenario.
the step-by-step procedure for a simple file-file scenario...
First u have to finish the Design Part in the IR
1) Create Data types
2) Create Message Types
3) Create Message Interface
4) Message Mapping
5) Message Interface.
Here it complete the desing part.
Then start thr configuration:-
1) Create the Configuration Scenario
2) Create the Business system and create the Communication Channel.
3) Sender Agreement
4) Receiver Determination
5) Interface Determination
6) Receiver Determination.
If u perfome this steps u wil be successfully complete u r File- File Scenario.
follow the below link to have clear picture of file-file scenario
STEP1:-
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
STEP2:-
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
Hope this helps u a lot.....
Thankx
Anil
Edited by: Venkat Anil Gannavarapu on Jun 11, 2008 11:36 AM
Edited by: Venkat Anil Gannavarapu on Jun 11, 2008 11:40 AM

XI 3 File to IDoc scenario - Still referencing Old Logical system

Hi
Dont know if you can help. I have a file to idoc scenario using XI 3 to R/3 4.6c system.
I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
Regards
Daniel

hi daniel...
this thread wud answer ur query....
Re: IDOC Payload
regards..
vishal

About file to file scenario

Similar Messages

Maybe you are looking for