About parameter with defaultConnectionName
Hello Sir,
I need to know pameter defaultConnectionName in use:ISAStateless,ISAStateFul
example : defaultConnectionName="ISAStateless"
<config isa:extends="../config[@id='crmdefault']">
<businessObject type="Z_CustomBO_Search" name="Z_CustomBO_Search" className="com.sap.icss.mod.impl.backend.crm.Z_CustomBackendCRM_Search" connectionFactoryName="JCO" defaultConnectionName="ISAStateless"/>
</config> in beckendobject-config.xml
Please let's me know
Regards,
Miss Soothiluck
it seems that purchasing num. is only related to the first selected vendor
datasource:
vendor date purchasing num
A 20090623 001
A 20090624 002
B 20090623 003
B 20090624 004
if selects (level1: A and B, level2: 20090623), only 001 was shown in level3
if selects (level1: B and A, level2: 20090623), only 003 wad shown in level3
is there any thing wrong with my parameter setting in CR2008? or there is a bug?
best regards!
Similar Messages
-
Question about function with in parameters
Hello,
I have a question about functions with in-parameters. In the HR schema, I need to get the minimum salary of the job_id that is mentioned as an in-parameter.
this is what I am thinking but I dont know if it's correct or not or what should I do next!
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
begin
SELECT min_salary INTO min_sal
FROM jobs
where job_id = get_minimum_salary(xy);
RETURN i_job_id;
end get_minimum_salary;
thanks in advance
EDIT
Thanks for your help all.
Is it possible to add that if the i_job_id which is the in type parameter does not have a minimum salary then use the following function to register an error:
create or replace procedure insert_error (i_error_code in number,
i_error_message in varchar2)
as
begin
insert into error_table (error_user, error_date, error_code, error_message)
values (user,sysdate,i_error_code,i_error_message);
end insert_error;
This function is basically to say that an error has occured and to register that error, at the same time I need to print out the error using the dbms_out.put_line.
Any ideas of how to do that?
Thanks again
Edited by: Latvian83 on Jun 1, 2011 5:14 AMHI
I have made little bit changes in ur code. try this
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
v_Min_sal jobs.salary%type=0;---- Variable declaration
begin
SELECT min_salary INTO v_ min_sal
FROM jobs
where job_id = i_job_id;
RETURN v_Min_sal;
end get_minimum_salary;
Regards
Srikkanth.M -
Read function block parameter with its object dictionary index in VC?
How do I read a function block parameter with its object dictionary index using NI-Fbus Communications Manager Programmer VC API?
You can use marco NIFB_INDEX(index) as parameter for nif_ReadObject function. The index is the relative index of the parameter in the block.
nifError_t nifReadObject(nifDesc_t ud, NIFB_INDEX(uint32 idx), void *buffer, uint8 *length)
Please also refer to 'NI-FBUS Hardware and Software User Manual' from Start->National Instruments->NI-FBUS->Manuals. Page 6-41 ~ Page 6-44 describe the detail information about nifReadObject() function.
Page 6-51 ~ Page 6-52 explain the usage of marcos for processing index.
Feilian (Vince) Shen -
Cannot assign an empty string to a parameter with JDBC type VARCHAR
Hi,
I am seeing the aforementioned error in the logs. I am guessing its happening whenever I am starting an agent instance in PCo. Can somebody explain whats going on?
Regards,
Chanti.
Heres the complete detail from logs -
Log Record Details
Message: Unable to retreive path for , com.sap.sql.log.OpenSQLException: Failed to set the parameter 1 of the statement >>SELECT ID, PARENTID, FULLPATH, CREATED, CREATEDBY, MODIFIED, MODIFIEDBY, REMOTEPATH, CHECKEDOUTBY FROM XMII_PATHS WHERE FULLPATH = ? <<: Cannot assign an empty string to a parameter with JDBC type >>VARCHAR<<.
Date: 2010-03-12
Time: 11:32:37:435
Category: com.sap.xmii.system.FileManager
Location: com.sap.xmii.system.FileManager
Application: sap.com/xappsxmiiearSounds like a UI browsing bug (when no path is selected from a catalog tree folder browser) - I would suggest logging a support ticket so that it can be addressed.
-
Unable to bind portlet parameter with page parameter in webcenter portal
Hi All,
I am trying to bind portlet parameter with the page parameter so that I can ahieve some business requirements.
Here is what I did,
In my Portlet producer application:
1) Created standards based portlet (jsr 286) with view.jspx and edit.jspx with rest of the things being default.
2) In my portlet.xml created two parameters and assigned these parameters to the portlet created above.
3) In the view.jspx added couple of output label adf components in the page.
4) deployed this to integrated weblogic server.
In my WC portal application:
Created a new page and added the portlet to this page( WSRP connection already exists).
deployed portal application on integrated server.
In the edit mode of the page I added one page parameter(Param1) and some default (constant) value added.
What I want is this:
when Param1 value is One display first output label and
when Param1 value is Two display second output label.
I am using jdev 11.1.1.5.0 with integrated weblogic server.There is no need to use page parameters for this.
You also have two types of parameters depending on what you want...
1) Preferences: these parameters can be used on a user based level. This means that users can personalize the portlets. When a user change the value of a preference, it is only applied for that specific user
2) Public parameters: these parameters are used to customize the portlet. The value you set in these parameter apply for all users.
I have made a simple example to show these two differences: http://www.yonaweb.be/PortletTest.zip
The portlet has 4 inputText on it. The first two can be set by specifying One or Two into the preference.
The other 2 inputText uses the value of the public parameter.
You should only deploy the portlet and consume it in a webcenter application. In the webcenter application, you don't need to do anything special. All is done in the portlet.
I am guessing you don't have written the code that will get the value of the parameter:
in case of a preference you will get the value by following code:
PortletRequest request = (PortletRequest)FacesContext.getCurrentInstance().getExternalContext().getRequest();
PortletPreferences preferences = request.getPreferences();
return preferences.getValue("outputparam", "One");In case of a public parameter (for customization instead of personalization) you use following code to retreive the value of a public parameter:
PortletRequest req = (PortletRequest)FacesContext.getCurrentInstance().getExternalContext().getRequest();
String param = (String)req.getParameter("PublicParam");
if(param == null)
return "Three";
return param;This code can also be found in the sample portlet application. -
We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Now that we are 2 upgrades behind, I'm getting little concerned. Thank you!
Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2. -
Multiple select parameter with each selected value covering multiple sub values
Hello, everyone,
In my SSRS report, I need to set a multiple select parameter called Group, with values: group1 group2, etc....
When group1 is selected, it needs to apply to data of certain sub groups: sub-group1, sub-group2;
When group2 is selected, it needs to apply to data of different sub groups: sub-group3, sub-group4 and sub-group5;
when both group1 and group2 are selected, then, it needs to apply to data of sub-group1 to sub-group5.
I know how to do it when only one group is selected: simply use a case statement in the query to select the right sub groups based on the group selected.
But I don't know a good way to do it when multiple groups are selected.
Any help, pointers are much appreciated. Thanks in advance!
RegardsHi QQFA,
If I understand correctly, there are two parameters (Group and Sub_group) in the report. When we select group1 in Group parameter, it will auto select sub-group1, sub-group2 in the Sub_group parameter; when we select group2 in Group parameter, it will auto
select sub-group3, sub-group4 and sub_group5 in the Sub_group parameter; when we select both all, it will auto select all sub_group values. If I have misunderstood, please don't hesitate to let me know.
In this scenario, we can create a temporary table with Group and Sub_group columns, then select Sub_group column values based on the Group field. For more details, please see:
Create a dataset with the query below:
CREATE TABLE #temp([group] nvarchar(50),sub_group nvarchar(50))
INSERT INTO #temp VALUES ('group1','sub-group1'),('group1','sub-group2'),('group2','sub-group3'),('group2','sub-group4'),('group2','sub-group5')
SELECT * FROM #temp
where [group] in (@Group)
Set available values and default values of Sub_group parameter with get values from the sub_group field in the new dataset.
Note that the two parameters are all multiple parameters.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I upgraded to latest version of mountain lion yesterday, this morning my power Mac was running extremely slowly (while typing, had to wait a second or two for words to appear), I shut down to see if problem would clear up. When starting up, screen went black with programming jargon, something about debugging with the word panic in parentheses. Screen then goes back to gray, says Mac encountered a problem and has to restart once I push a key. Apple logo comes on gray screen, icon keeps circling and nothing happens. This has happened three times in a row after shutting down and trying to restart. Any thoughts?
When verifying disk, said could not repair disk, back up as many files as possible then re format disk. Computer now doing Internet recovery. Should I. Do the following in this order
1 restore from back up on time machine
2 re install osx
These are the options coming up on osx utilities window -
I want to upgrade to Lightroom 5, but I'm concerned about compatibility with my 2008 intel Core 2 Duo iMac with only 4G of Ram. Will I be able to run Lightroom 5 okay if I upgrade from Snow Leopard to Lion? What will happen to the applications that aren't 64-bit compatible? Also the Eye-one Display 2 colorimeter to calibrate the monitor will not run on Lion, so that will be an expensive upgrade to an i1DisplayPro. Is the upgrade important enough to offset the expense? I have an Epson R2000 printer. Will there be problems with the drivers if I upgrade to Lion? It would be great to hear from other mac users who are also photographers and who print their own photos.
Before upgrading to Lion be sure to read this link:
https://discussions.apple.com/docs/DOC-6271
Adobe lists these requirements:
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Looking at http://www.everymac.com/ even the earliest 2008 iMac was fully 64 bit, even though Boot Camp doesn't support 64 bit Windows on that machine. -
When I try to reformat there is an error message about configurations with the pointing device
When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
[Forum FAQ]How do I add a search feature in the parameter with long drop down list?
Introduction
There is a scenario that thousands of values in the drop-down of a parameter. Scrolling through the large drop down list is slow and cumbersome. Is there a way that we add a search feature in the report, so that it can filter down the values in the drop
down list to a smaller list of values?
Solution
To achieve this requirement, we can add a parameter with multiple keywords ahead, then all of available values which are begin with the keyword will display in the parameter list. In this scenario, we can create cascading parameters. One is a keyword parameter,
and the other parameter is based on the keyword to display the available values.
In order to enable the user to type multiple keywords, we can use the query below to create a split function which takes the list and the de-limiter as input parameters and splits all the values in the database:
CREATE FUNCTION [dbo].[SplitParameterValues] (@InputString NVARCHAR(max), @SplitChar VARCHAR(5))
RETURNS @ValuesList TABLE
param NVARCHAR(255)
AS
BEGIN
DECLARE @ListValue NVARCHAR(max)
SET @InputString = @InputString + @SplitChar
WHILE @InputString!= @SplitChar
BEGIN
SELECT @ListValue = SUBSTRING(@InputString , 1, (CHARINDEX(@SplitChar, @InputString)-1))
IF (CHARINDEX(@SplitChar, @InputString) + len(@SplitChar))>(LEN(@InputString))
BEGIN
SET @InputString=@SplitChar
END
ELSE
BEGIN
SELECT @InputString = SUBSTRING(@InputString, (CHARINDEX(@SplitChar, @InputString) + len(@SplitChar)) , LEN(@InputString)-(CHARINDEX(@SplitChar, @InputString)+ len(@SplitChar)-1) )
END
INSERT INTO @ValuesList VALUES( @ListValue)
END
RETURN
END
Use the query below create a stored procedure to return all available values for Account parameter:
create PROCEDURE sp (@keyword nvarchar(50))
AS
SELECT AccountDescription
FROM DimAccount d
inner join (SELECT [param] FROM SplitParameterValues (@keyword,',')) s on d.AccountDescription like (s.[param]+'%')
In Report Designer, select Stored Procedure as the Query type for DataSet1, then select or type sp in the drop-down list as below:
By default, there is a parameter named keyword in the Parameters pane.
Add a multi-value parameter named Account in the report, then select “Get values from a query” option for Available Values as below:
Report Design and Report Preview surface
Report Design:
Report Preview:
References:
Create User-defined Functions (Database Engine)
Adding Cascading Parameters (SSRS)
Applies to
Reporting Services 2005
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hmmm. This didn't work. I even re-booted, and Firefox still doesn't show the search engine.
It was actually an update to an earlier engine, and I foolishly removed the old version rather than just updating it.
Is there anything elsewhere (eg. the registry) that might be preventing this? -
Pass parameter with apostrophe
Hi,
How I can pass parameter with apostrophe to a store procedure.Whats the change i need to make to ' when i am passing.
Thanks in advance.
PramodIf you are using bind variables, the string should be escaped automatically. If you are not using bind variables, you should be using bind variables.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Parameter with Dynamic prompt - bug encountered
I am using CRD XI release 2 (SP2) against an Oracle 10 release 2 database
I have a report fully working with a static parameter
1. But I have an issue when trying to introduce a parameter with dynamic prompts
I have a data source (PointofSale retrieving data from a database view)
I am trying to have the newPointOfSale parameter to prompt the user for values taken out of the PointOfSale source.
I set up the parameter as indicated by the Crystal RD210 Guide.
But when I run the report I am prompted for Server Name(greyed out)/user name/password(something I have never had to do for this report until introducing the dynamic parameter)
In doubt I enter these of the database user I am using as a source for this report
I get a strange error message telling me there is a problem with another datasource on the report.
'Prompting failed with the following error message: 'List of Values failure: fail to get values. [Cause of erro: The table 'DLEX_REPORT.DLEX_REPORT_RETRIEVE.AIRLEGSUMMARY_SUM' could noyt be found. UNKNOWN.RPT]'.
Error source: prompt.ddl Error code 0x8004380D
There seem to be bug with parameters and dynamic list of values in Crystal as other people seem to encounter similar issue
Is there a fix or a workaround?
2. Also I believe this forum allows to escalate bugs with SAP/business objects. Does anyone know how to do this? As this is very obviously a bug....
Thanks
PhilippeI am not sure whether this will solve your problem since you are using a different implementation of Crystal Reports , but I've received the same error using CR XI Developer Release 2 in conjunction with the Crystal Reports Server XI Release 2. My solution was to go into the Business View Manager application and fix the Data Connection object associated with the problematic Dynamic prompt by supplying a user name and password for the data connection object and setting the "Runtime Prompt Mode" property to "Never Prompt". For some dumb reason, the Crystal Reports client will publish the data connection object to the Business Views database without any login credentials associated with it. So after creating such a prompt in a report, you have perform this extra step before running the report the first time. The good news is that if you reference this dynamic prompt in other reports, it will work - so you only need to fix it when it is first created.
-
Adding a parameter with comma separated having different values
i want to add a parameter with comma separated having different values of a column. e.g i have column having values from 10000 to 99999. i want to create report for the selected values of 11111,12111,131111 etc. This selection can be one or more values as desired. Second problem is restricting the records as per parameter.
Reports doesn't allow multi-selection of a parameter in its parameter form. You need to use Oracle*Forms or an HTML Form to front end more advanced parameter form options.
However, you could have multiple parameters and combine their selections into a single parameter in the after parameter form trigger. This would at least allow you to give the user the option for selecting up to 'n' parameters. The single parameter would have to be of type "character" and you probably want to add appropriate quotes around the values in the after parameter form trigger.
Second problem is restricting the records as per parameter. Once you've got the comma seperated values into a single parameter (say p_myValues with a default value of '') then you can just use a lexical parameter to restrict the values as in:
select * from emp
where to_char(empno) in (&p_myValues) -
Is there a phone number I can call to talk to a live person about help with Lightroom issues ?
Is there a phone number I can call to talk to a live person about help with Lightroom issues ?
well the reason I wanted to talk to someone live because it would take forever to explain everything on here But anyway, here goes. I have an HP Pavilion Notebook with Intel Core i5-323om CPU @2.60 GHz and 8 gb ram 64bit. I am trying to run Lightroom 5.7 on my laptop and having major issues. I use an external hard drive for the storage of my photos. When I try to use Lightroom I run into many issues: Flickering of the screen, freezing up, slow, the loading circle just goes round and round lol. If I go to the washroom or leave the computer for even a minute it freezes up. I have to keep pressing Ctr/alt/delete to bring it back when it flickers. I have to constantly exit out of the program and restart it to be able to edit even just a couple of photos and then it starts acting up again.
I have tried un-installing and re-installing, updating everything on my pc, changing compatibility settings, updating development settings, I even took the laptop into have it looked at and they did all kinds of updates etc...and still couldn't figure out why it wasn't working for me. I have gone through the lists of troubleshooting for LR problems and there just seem to be nothing that works.....I have made new catalogues, moved them, tried using the software on my pc without the EHD, etc etc.......I have tried EVERYTHING...I think.....so I was looking for some answers as to why this is happening....
Maybe you are looking for
-
Can I connect an iPad air to a projector.°
Can I connect an iPad air to a projectors
-
Bookmarks tab on Yahoo Toolbar won't show drop down list of Boolmarks?.
I tried removing and reinstalling Yahoo Toolbar extension but still have problem.
-
Unable to find any of the mail servers for pop, gmail and me. However can access all accounts directly through web without issue.
-
After downloading ver 10.1 no help available
I bought Version 10.1 after years of Final cut express as it no longer seems to work properly in Mavericks. However every time I attempt to open the help file my MACPRO returns nothing. Is there a Manual on line and is there a way to make the help f
-
I have added pages to my site but for some reason my menu widget won't update to add the new pages. I have tried saving and going out of the program. Can I force it to somehow refresh?