About the bat file to start and stop the weblogic server10.3
I am using windows 2003 os.
i installed the WLS 10.3 .
can anyone help me how to write the bat file for starting and stoping the weblogic server instance.so that it willl run as background service.
I am new to this .Please suggest me
Any help is appreciated.
Thanks
Sailaja.
Hi David,
yes.i am talking about Admin server.
when i am creating the new domain,i didn't encounter any prompt asking me to run the Admin server as windows services.why i am not getting this prompt?where exactly i will get this prompt while creating domain.
i am using the weblogic 10.3
how can i make the admin server as windows services.
Thanks
Sailaja.
Edited by: sj0609 on Dec 2, 2008 4:02 PM
Similar Messages
-
Hi All,
Can we create a batch file to start and stop the services. I need to start all the services like shared, essbase, eas, planning, webanlysis and financial reporting, and at also need to stop them using windows batch file.(Using windows 2003 server....service pack 1). Any help would be appreciated.
ThanksHi,
The simplest script would be something like this. Save it as a .bat file, set all your services to manual and then set up a scheduled task to run this script when the computer starts.
Gee
:: Startup Script for Hyperion Services ::
date/t >> startup.log
time/t >> startup.log
echo "Starting Hyperion Services" >> startup.log
net start "Hyperion S9 OpenLDAP" >> startup.log
net start "Hyperion S9 Shared Services" >> startup.log
:: Insert pause of 5 seconds to ensure HSS has finished starting
ping localhost -n 6 >nul
net start "Hyperion S9 BI+ Analytic Services 9.3.1 - Essbase" >> startup.log
net start "Hyperion S9 Administration Services ATS5" >> startup.log
net start "HyperionRMIRegistry" >> startup.log
net start "Hyperion S9 Planning" >> startup.log
net start "Hyperion S9 Provider Services ATS5" >> startup.log
net start "Hyperion S9 Apache 2.0" >> startup.log
net start "Hyperion S9 BI+ 9.3 Core Services 1" >> startup.log
:: Insert pause of 10 seconds to ensure Core has finished starting
ping localhost -n 11 >nul
net start "Hyperion S9 BI+ 9.3 Workspace" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Java RMI Registry" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Print Server" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Report Server" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Scheduler Server" >> startup.log
net start "Hyperion S9 BI+ 9.3 Financial Reporting Web application" >> startup.log
net start "Hyperion S9 BI+ 9.3 Web Analysis" >> startup.log
date/t >> startup.log
time/t >> startup.log
echo "Finished Starting Hyperion Services" >> startup.log
echo "###################################################################" >> startup.log -
How to start and stop the BI Services in Solaris 10
Hello All,
Can anyone guide me on how to start and stop the BI Services in Solaris 10. In windows there are options set in Start->Programs->Middleware_Home->Start/Stop BI Services.
Primarily after doing changes to the scheduler configuration, I need to restart the services to get it implemented? If yes how can I do it?
Any help will be appreciated
Thank you
Ash
Edited by: 902739 on Jan 11, 2012 12:17 PMPlease help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name Hostname
# Hope SAP ERP Prod DB Primary gsgbbux860
# Hope SAP ERP Prod DB Standby gsgbbux861
# Hope SAP ERP Prod Cluster gsgbbux862
# Hope SAP ERP App 1 gsgbbux864
# Hope SAP ERP App 2 gsgbbux865
Thanks in advance
Zaheer -
Start and stop the Communication channel from Java Mapping
How to start and stop the Communication channel from Java Mapping in XI 3.0
Scenario PI - > MQ -> Third Party web application
Web application is down and then Communication channels are stop manually .
We need to automate this process,
MQ Solution - Trigger will be set in MQ which will be called when web application is stopped
Trigger will send u201CSTOP u201C message to PI
How to configure PI scenario to stop different com channels when this message received ?check this link: http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/frameset.htm
make sure that MQ send http request to PI. i dont think a configuration scenario is required in PI. Only roles should be enabled with proper user provided to MQ team.
However, for security reasons, you can configure a scenario if you dont want to expose PI infrastructure directly to 3rd parties. -
How do I start and stop the corection system - das Korrektursystem/ the program in pages where one mark a text while proff reading it?
Pages version?
-
How to eliminate the "Ping" sound when starting and stopping videoing
How to eliminate the "ping" sound when starting and stopping a video on iPhone. Thanks.
I asked my friends on Facebook and one came up with the answer... I just had to flip the little "ring-silent switch" on the side of the iPhone to cut the "Pinging" sound! There's probably another way but this works!
-
I am trying to download mountain lion but the pc goes to sleep and stops the download even though I have set my power defaults to 3 hours
aldofromwilts wrote:
I am trying to download mountain lion but the pc goes to sleep and stops the download even though I have set my power defaults to 3 hours
Try setting the Energy Saver to "never" and uncheck "put hard disks to sleep when possible". You can allow the screen to sleep after any suitable time.
Hope that helps. Regards. -
Starting and Stopping the Portal
Hi all
After deploying my PAR, I am restarting the whole <b>SAP Instance</b> in the Server.
1. Is this the right way ???
2. Is there any other easy way to restart/stop the PORTAL alone instead of touching the SAP Instance???
Thanks
KayHi Kay,
You are right about custom login changes.But Normaly if you develop portal application and upload the PAr file ,you do not have to restart the instance.Portal runtime takes care of droping the existing copy of the PAR or replacing with newer version.
This is what i get from help
Portal Archive Files Deployment Cycle
Use
The deployment procedure for a Portal Archive (PAR) file consists of two steps:
Uploading the PAR file into the application repository
Notifying all Portal Runtime (PRT) nodes that a new version of the application is available
Activities
Uploading a PAR File to the Application Repository
There is only one application repository and all PRT nodes and PAR files on the J2EE Engine cluster share the same content. The PAR upload procedure stores the whole archive in the underlying persistence layer. It also extracts all the information that requires fast access at runtime from the portalapp.xml.
Modifying PRT Nodes
Once the upload to the application repository is completed, the upload process notifies all PRT nodes. This step updates thelocal deployment of the portal application on each server. The update of the local deployment requires runtime deployment capabilities, and that is why all portal applications can be released. A PRT node:
· Checks if the application is already loaded and drops the corresponding instance.
This step also checks and drops all entities (applications, components and services) that depend on the current application.
· Starts the deployment process.
This process gets the PAR file from the repository and updates the local deployment by expanding the archive content.
· Restarts all portal applications that have been dropped.
The main purpose of the local deployment is to improve performance at runtime by providing fast access to classes and to portal application resources. The local deployment avoids additional round trips to the application repository and, in that sense, must be considered as a cache for portal applications.
Deployment Policy
The local deployment is done using the DeploymentPolicy property declared in the portalapp.xml file:
· If this property is set to 5.0
The deployment is backwards compatible with the EP50 version of the portal. The old folder is not removed and the deployment process simply overrides the folder with the new content.
· If the DeploymentPolicy property is missing
A regular deployment is performed; the old deployment folder is removed and then replaced by the new one.
The deployment logic assumes that the application does not store any configuration locally; everything must be stored in the repository.
For more information about the DeploymentPolicy property, see Application-Config Element Properties. -
Batch file to start and stop services
I've setup a CF Probe on my Development Server to ensure my
CF Production server is up and running (services = Apache and CF
Application Server). It checks the PROD login page and if it times
out in 30 sec the probe fails. I understand I can execute a file
(batch file with net start and net stop) but the problem is I need
to have the probe somehow point to the .bat file on the PROD server
and not on the local machine. How can I remotely access this batch
file and execute it? I don't know how to point to the file on the
other server... can anyone help?Hi Ken,
You had pointed me in the right direction regarding the
psstools in order to create a batch file that can remotely start
and stop services.
i used the psexec command and am able to successfully restart
the services needed remotely... however when i pick the file in the
coldfusion administrator (in the probes section) how to i point to
the batch file to run? it seems like the probe is not running the
script like i want... the file is located on the c:\ so i entered
c:\test2.bat...
Thanks,
Matt
Matt,
You should review the online help in the cfadmin for probes
and the links it points you to in the developer's guide. Basically
you need to define a new probe in the cfadmin by clicking the
"Define New Probe" button. One of the probe's attributes will be
what action. Define the action as a program and point it at a batch
file running psexec. You will probably need to run CFMX as a
specific user and not as localsystem, which is the default. -
Report on active sync actions (like starting and stopping the sync)
Is there a way to report on who stopped or started an active sync? I'm guessing it has to be stored somewhere, but I can't find it.
Thanks!Hi Smit,
I believe you are talking about FMS AWS instance and you may be using a centos 4.0.2 instance AMI or lower?
Well ... earlier, options for stopping a centos AWS image was not available, but recently they are there in place, so I suppose if you use a new centos 4.5.1 AMI then probably you can start stop the aws instance on yuor will. Give ut a shot and let me know.
Regards,
Shiraz Anwar
I again cross-checked and found that you were right, start and stop is not supported there .... an alternative method is to take a snapshots of the runinng instnace and terminate that instance after that, later you can use your snapshot to attach to the EBS volume to run your system again. You may need to use the Elastic IP address, because you wont like your users to update each time you terminate the old instance, and create new instance from snapshot. I have never used it in this way, but this is one of the approach. -
How to Start and Stop the SAP System
Hi,
I have installed "Sneak Preview"; Searched for start and stop scripts but there are more than one script which has named start.bat and stop.bat. Moreover, I searched the documents which comes with Sneak Preview but could find useful instruction there either.
Question: Could you please point me to the documentation where it explains the starting and stopping SAP, for Sneak Preview?
Thanks in advance
Jawad KakarPlease help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name Hostname
# Hope SAP ERP Prod DB Primary gsgbbux860
# Hope SAP ERP Prod DB Standby gsgbbux861
# Hope SAP ERP Prod Cluster gsgbbux862
# Hope SAP ERP App 1 gsgbbux864
# Hope SAP ERP App 2 gsgbbux865
Thanks in advance
Zaheer -
void Ctest2Dlg:nTimer(UINT nIDEvent)
DAQmxErrChk (DAQmxBaseStartTask(taskHandle));
DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByScanNumber,data,100,&pointsRead,NULL));
DAQmxBaseStopTask (taskHandle);
If I do this, the program will halt in about half minute. But if I do not start and stop task in OnTmer function, the program will not halt and the data acquired is not corrected.
Please help me! ThanksThis is a duplicate post. Please post any new replies to the linked forum.
Samantha
National Instruments
Applications Engineer -
The "Enter" key keeps starting and stopping itunes songs...
Hey, everytime I hit the enter key for example in Safari to enter a webpage, my itunes songs keep starting and stopping like I have the itunes window active... Does anyone know a solution for this? I tryed reinstalling and no luck...
ThanksWhat are the system specs for your pc? It seems it's to slow to play iphone's 720p HD videos. QT 7.7.3 is the latest for windows but VLC Player will play these videos too.
-
Automatic start and Stop the SAP System
Hi experts,
We want to deploy the unattended/Scheduled Start SAP and stop SAP in IBM i series. How to do it? I have tried with WRKJOBSCDE and putted the command STOPSAP or STARTSAP but after finishing the job, now result. But when I simply put command STOPSAP/STARTSAP it works(start and stop sap system).
How to deploy it?
Thanks
AsadHi Ken,
yes, that is correct, but in the meantime, it is **** easier ;-)
As SAPHostAgent starts automatically, it is just needed in the default profile:
Autostart = 1
This is a really nice new feature ;-))
Regards,
Volker Gueldenpfennig, consolut international ag -
Greetings all,
I am trying to create a script to automate a PDF export process for my company for inDesign. I’m fairly new to inDesign itself and have no previous experience with javascript, although I did take C++ in high school and have found it helpful in putting this code together.
We have an inDesign template file and then use the Multi-page PDF importer script to import PDF files. We then have to export two version of each file that we import, then delete the imported file and all of the pages to reset the template. This has to be done for nearly 1000 pdf files each month and is quite tedious. I’m working on automating the process as much as possible. I’ve managed to piece together code that will cleanup the file much quicker and am now trying to automate the PDF exports themselves.
The files are sent to us as “TRUGLY#####_Client” and need to be exported as “POP#####_Client_Date-Range_North/South.pdf”
For example, TRUGLY12345_Client needs to be exported as POP12345_Client_Mar01-Mar31_North and POP12345_Client_Mar01-Mar31_South.
There are two templates built into the template file for the north and south file that are toggled easily via layer visibility switches. I need to get a code that can ideally read the #s from the imported Trugly file as well as the Client and input those into variables to use when exporting. The date range is found in the same place in the top right of each pdf file. I am not sure if this can be read somehow or if it will have to be input manually. I can put North or South into the file name based on which template layer is visible.
I am not sure how to go about doing this. I did find the following code for exporting to PDF with preset but it requires me to select a preset and then type the full file name. How can I set it to automatically use the “Smallest File Size” preset without prompting me to choose and then automatically input some or preferably all of the file name automatically? (If the entire filename is possible then I don’t even want a prompt to appear so it will be fully automated!)
PDF Export Code (Originally from here: Simple PDF Export with Preset selection | IndiSnip [InDesign® Snippets]):
var myPresets = app.pdfExportPresets.everyItem().name;
myPresets.unshift("- Select Preset -");
var myWin = new Window('dialog', 'PDF Export Presets');
myWin.orientation = 'row';
with(myWin){
myWin.sText = add('statictext', undefined, 'Select PDF Export preset:');
myWin.myPDFExport = add('dropdownlist',undefined,undefined,{items:myPresets});
myWin.myPDFExport.selection = 0;
myWin.btnOK = add('button', undefined, 'OK');
myWin.center();
var myWindow = myWin.show();
if(myWindow == true && myWin.myPDFExport.selection.index != 0){
var myPreset = app.pdfExportPresets.item(String(myWin.myPDFExport.selection));
myFile = File(File.saveDialog("Save file with preset: " + myPreset.name,"PDF files: *.pdf"));
if(myFile != null){
app.activeDocument.exportFile(ExportFormat.PDF_TYPE, myFile, false, myPreset);
}else{
alert("No File selected");
}else{
alert("No PDF Preset selected");
So far my code does the following:
1) Runs the Multi-Page PDF Import Script
2) Runs PDF Export Script Above
3) Toggles the Template
4) Runs #2 Again
5) Deletes the imported PDF and all pages and toggles template again.
It’s close and much better than the original process which was almost 100% manual but I’d like to remove the Preset prompt from the PDF script and have it automatically select the “Smallest File Size” preset. and then if there’s a way to have it auto-fill in the file name so no user input is required at all other than selecting each file to import. (If there’s a way to setup a batch action for the multi-import script that would be even better!)
Thanks in advance and if there’s anything else I can provide that would help please let me know! Even a nudge in the right direction will be a big help!If you hold down the option key, it will typically show the location. Or you can often hit option-return on the file and it will reveal the file in the Finder, instead of opening it.
Final option is to open it, and just option-click the filename in the toolbar of Preview and it should show you the location.
It's probably an attachment to an email you've received. If you have Mail set to cache emails and their attachments it'll be stashed in a subdirectory of ~/Library/Mail. Which is fine.
Maybe you are looking for
-
Does not display in iTunes -- How can I restore it?
I have not used my Nano for a while, and I upgraded to Leopard from Tiger since. I just plugged in my Nano and it briefly shows up in iTunes though it gives me a message that it was not properly disconnected and it disappears and in a minute or so it
-
Hello, I was looking into patching/upgrading from 10.2.0.3 to a 10.2.0.5 verison. Are the two zip files for 10.2.0.5 from http://www.oracle.com/technology/ "Patch Installers" The same as Patches from Metalink ? Please explain the difference. Thanks..
-
It seems as if icloud only wants me to save files to iCloud that I create with a few iCloud compatible apps (mail, pages, numbers, keynote). I used iDisk as an off-site back up for many of my most important files, including those created with 3rd par
-
Purchased Lion before upgrading to newest leopard and now I can't get Lion on my computer!
I purchased Lion before I had done the CD upgrade to the latest Leopard Operating System. Two days ago I finally installed the Leopard upgrade and my system was updated to Leopard 6.8. I think.. What ever the very last version was. Then I went to
-
How to apply saturation filter between keyframes only?
Hi, I have a bunch of old home videos that look bleached, I mean flat colours. It's the camera that causes this (it's a cheap camera). So I found a filter in Premiere that I can use to adjust saturation: * Fast Color Corrector Now I can only apply th