About the ejbc command(repost, more detail info)

Hi all,
I have posted the problem before and still didn't resolved.
The problem is:
One stateless session ejb deployed on the iAS server,running ok. After added
a method, I used the ejbc -iiop -sl <home> <remote> <bean class> to compile
it, but it always said: (where the getErrMsg() was the newly added method,no
special setting(such as transaction etc.) required for it,just a simple
business method)
ejb_stub_MessageLogger.java:7: class
com.iaspec.bmx.hub.ejb.msglogger.ejb_stub_MessageLogger must be declared
abstract. It does not define java.util.HashMap getErrMsg() from interface
com.iaspec.bmx.hub.ejb.msglogger.MessageLogger.
But after I use iAS deploytool to reconstruct the ejb from scratch and
deployed it to iAS, I run the ejbc command again, it's ok now!!! Why?
Does anyone have experience of it?
plus: I don't want to use iAS deploytool any more, it's so cumbersome:(
Johnson Lee

Hi all,
The problem has been resovled. But it's still very strange!
After I copied these modified classes to the location in iAS where I
deployed the ejb to, or delete the ejb from iAS, the ejbc command run OK.
Is this an ejbc bug?
Johnson Lee
"Johnson Lee" <[email protected]> wrote in message
news:9hf3ja$[email protected]..
Hi all,
I have posted the problem before and still didn't resolved.
The problem is:
One stateless session ejb deployed on the iAS server,running ok. Afteradded
a method, I used the ejbc -iiop -sl <home> <remote> <bean class> tocompile
it, but it always said: (where the getErrMsg() was the newly addedmethod,no
special setting(such as transaction etc.) required for it,just a simple
business method)
ejb_stub_MessageLogger.java:7: class
com.iaspec.bmx.hub.ejb.msglogger.ejb_stub_MessageLogger must be declared
abstract. It does not define java.util.HashMap getErrMsg() from interface
com.iaspec.bmx.hub.ejb.msglogger.MessageLogger.
But after I use iAS deploytool to reconstruct the ejb from scratch and
deployed it to iAS, I run the ejbc command again, it's ok now!!! Why?
Does anyone have experience of it?
plus: I don't want to use iAS deploytool any more, it's so cumbersome:(
Johnson Lee

Similar Messages

  • Error in loading the WSDL file. Check the error log for more details

    Hello,
    I am trying to create a Import Adaptive Webservice Model. I am using the WSDL:
    http://www.abysal.com/soap/AbysalEmail.wsdl
    I am getting the below error when I choose WSDL source as UDDI or file (I am not using any logical destination)
    "Error in loading the WSDL file. Check the error log for more details."
    Where can i see the error log? And what is the solution to fix this?
    I am able to create the model if i save the wsdl locally on my machine and choose Local File System or File as the WSDL source. But at runtime this fails as the application tries to read the WSDL for metadata info and it looks into the application server for this file.
    I also tried creating the old webservice model. And it is able to create the model. But I feel I need to use the new model as this one is deprecated.
    Thanks,
    Sachin

    Hi
    For the logs you can search in this directory
    Goto Window->Show view->Other->PDE Runtim->Error Log
    please try this may it would help you out, try to create a model for you Web Service using Web Service Model (DEPRECATED)
    See this link:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/integration%2bof%2bweb%2bservices%2b-%2bdifferent%2bscenarios

  • How to get more detailed info while running a BAPI in test mode

    Hi friends
    I am trying to test 'BAPI_QUOTATION_CREATEDATA2' by opening the BAPI with 'se37' and then clicking on the button Test/Execute (F8) and entering all the data required.
    However, I get a message as follows.
    '555 The sales document is not yet complete: Edit data'
    While creating the QUOTE manually using 'va21' I get more detailed messages like what kind of data is missing 'whether valid to date is missing ..etc.etc.'.
    However, while testing thro' bapi, all it says is that sales document is not complete.
    Is there a way to see more detailed info as to what information is missing, so that I can put them before running.
    Your feedback or suggesions will be highly appreciated.
    Thansk
    Ram

    Thanks Rob
    Actually it says
    W  V1   555  The sales document is not yet complete: Edit data.
    As I said, I am running the BAPI manually by opening the BAPI using SE37 and then clicking on the F8 button. This inreturn will give me an opportunity to click on different object trees to enter the sample data. So I have entered everything that I thought was needed. But still it keeps complaining that the info is not complete but no further details.
    Hope there is some log file or something that I can see to get more details.
    Thanks
    Ram

  • An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

    An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024) 
     while proview the report i will get this error am using sql server 2008R2,
    can u plesae hlep me out for this
     

    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
      <Locale>English (United States)</Locale>
      <TimeZone>W. Europe Standard Time</TimeZone>
      <Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
      <SystemName>WEGDACM1</SystemName>
      <OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
      <OSVersion>6.1.7601</OSVersion>
      <ProcessID>4880</ProcessID>
      <Virtualization>Hypervisor</Virtualization>
    </Header>
    rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
    rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
    rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
    servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
       at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
    filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
       at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
    rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
    rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
    servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
    rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
    library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
    servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
    appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
    library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

  • Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

    Hi all,
    I have TFS2012 and run several projects.
    We encounterwed with such an error while using Build server.
    Overall Build Process
    Initial Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    00:00
    Get the Build
    00:00
    Update Build Number
    Initial Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Final Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Result = Ephone_DIT_Deploy_20150424.1
    01:56
    Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
    Initial Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    00:00
    Get the Build Directory
    Initial Property Values
    Result = d:\temp\217\CTI\Ephone_DIT_Deploy
    01:53
    If Not String.IsNullOrEmpty(ConfigurationFolderPath)
    Initial Property Values
    Condition = True
    01:53
    Run TfsBuild for Configuration Folder
    Initial Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp" 
    00:08
    Getting sources
    00:02
    Labeling sources
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
    00:19
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:10
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    MSBuild Log File
    00:08
    Generating list of changesets
    00:20
    Built Skins\SkinEPhone.cs for default targets.
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
    Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
       at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
       at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
       at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
       at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
       at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
       at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
    00:03
    Creating work item
     Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
    Exception Stack Trace:    at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
       at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
       at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    Final Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    Final Property Values
    Condition = True
    Final Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
    Final Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    Please have a look and guide where to find a problem
    Thanks ahead

    Hi Hooi,
    I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
    From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
    Best regards,

  • SQL reporting - An internal error occurred on the report server. See the error log for more details. (rsInternalError)

    I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
    Error: Sub report cannot be shown.
    An internal error occurred on the report server. See the error log for more details. (rsInternalError)
    When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
    Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
    Any Suggestion/feedback is highly appreciated.
    Thank You.
    The code of the sample RDL is shown below:
    <?xml version="1.0" encoding="utf-8"?>
    <Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
      <DataSources>
        <DataSource Name="DataSource1">
          <DataSourceReference>DataSource1</DataSourceReference>
          <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
        </DataSource>
      </DataSources>
      <BottomMargin>0.25in</BottomMargin>
      <RightMargin>0.25in</RightMargin>
      <PageWidth>11in</PageWidth>
      <ReportParameters>
        <ReportParameter Name="machine_id">
          <DataType>String</DataType>
          <Prompt>machine_id</Prompt>
        </ReportParameter>
        <ReportParameter Name="from_date">
          <DataType>String</DataType>
          <AllowBlank>true</AllowBlank>
          <Prompt>From Date</Prompt>
        </ReportParameter>
        <ReportParameter Name="to_date">
          <DataType>String</DataType>
          <AllowBlank>true</AllowBlank>
          <Prompt>To Date</Prompt>
        </ReportParameter>
      </ReportParameters>
      <rd:DrawGrid>true</rd:DrawGrid>
      <InteractiveWidth>8.5in</InteractiveWidth>
      <rd:SnapToGrid>true</rd:SnapToGrid>
      <Body>
        <ReportItems>
          <Table Name="table1">
            <DataSetName>Main_Report</DataSetName>
            <TableGroups>
              <TableGroup>
                <Header>
                  <TableRows>
                    <TableRow>
                      <TableCells>
                        <TableCell>
                          <ReportItems>
                            <Textbox Name="textbox2">
                              <rd:DefaultName>textbox2</rd:DefaultName>
                              <ZIndex>1</ZIndex>
                              <Style>
                                <TextAlign>Left</TextAlign>
                                <PaddingLeft>2pt</PaddingLeft>
                                <PaddingBottom>2pt</PaddingBottom>
                                <PaddingRight>2pt</PaddingRight>
                                <PaddingTop>2pt</PaddingTop>
                              </Style>
                              <CanGrow>true</CanGrow>
                              <Value>=Fields!syscode.Value</Value>
                            </Textbox>
                          </ReportItems>
                        </TableCell>
                      </TableCells>
                      <Height>0.25in</Height>
                    </TableRow>
                  </TableRows>
                  <RepeatOnNewPage>true</RepeatOnNewPage>
                </Header>
                <Grouping Name="table1_Group1">
                  <PageBreakAtEnd>true</PageBreakAtEnd>
                  <GroupExpressions>
                    <GroupExpression>=Fields!syscode.Value</GroupExpression>
                  </GroupExpressions>
                </Grouping>
              </TableGroup>
            </TableGroups>
            <Details>
              <TableRows>
                <TableRow>
                  <TableCells>
                    <TableCell>
                      <ReportItems>
                        <Subreport Name="subreport1">
                          <Parameters>
                            <Parameter Name="machine_id">
                              <Value>=Fields!machine_ip.Value</Value>
                            </Parameter>
                            <Parameter Name="syscode">
                              <Value>=Fields!syscode.Value</Value>
                            </Parameter>
                            <Parameter Name="from_date">
                              <Value>=Parameters!from_date.Value</Value>
                            </Parameter>
                            <Parameter Name="to_date">
                              <Value>=Parameters!to_date.Value</Value>
                            </Parameter>
                          </Parameters>
                          <ReportName>Holding_Summary_Multi_Period</ReportName>
                        </Subreport>
                      </ReportItems>
                    </TableCell>
                  </TableCells>
                  <Height>0.25in</Height>
                </TableRow>
              </TableRows>
            </Details>
            <TableColumns>
              <TableColumn>
                <Width>10.5in</Width>
              </TableColumn>
            </TableColumns>
            <Height>0.5in</Height>
          </Table>
        </ReportItems>
        <Height>0.75in</Height>
      </Body>
      <rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
      <LeftMargin>0.25in</LeftMargin>
      <DataSets>
        <DataSet Name="Main_Report">
          <Query>
            <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
            <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
    where machine_ip = @machine_id</CommandText>
            <QueryParameters>
              <QueryParameter Name="@machine_id">
                <Value>=Parameters!machine_id.Value</Value>
              </QueryParameter>
            </QueryParameters>
            <DataSourceName>DataSource1</DataSourceName>
          </Query>
          <Fields>
            <Field Name="syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>syscode</DataField>
            </Field>
            <Field Name="display_name">
              <rd:TypeName>System.String</rd:TypeName>
              <DataField>display_name</DataField>
            </Field>
            <Field Name="customer_syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>customer_syscode</DataField>
            </Field>
            <Field Name="account_syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>account_syscode</DataField>
            </Field>
            <Field Name="machine_ip">
              <rd:TypeName>System.String</rd:TypeName>
              <DataField>machine_ip</DataField>
            </Field>
          </Fields>
        </DataSet>
      </DataSets>
      <Code>Shared offset As Integer
    Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
      If reset
        offset = pagenumber - 1
      End If
      Return pagenumber - offset
    End Function
    </Code>
      <Width>10.5in</Width>
      <InteractiveHeight>11in</InteractiveHeight>
      <Language>en-US</Language>
      <PageFooter>
        <ReportItems>
          <Image Name="image1">
            <Sizing>Fit</Sizing>
            <Left>8.875in</Left>
            <MIMEType />
            <Width>1.5in</Width>
            <Source>External</Source>
            <Style />
            <Value>bottom_right_logo.gif</Value>
          </Image>
        </ReportItems>
        <Height>0.5in</Height>
        <PrintOnLastPage>true</PrintOnLastPage>
        <PrintOnFirstPage>true</PrintOnFirstPage>
      </PageFooter>
      <TopMargin>0.5in</TopMargin>
      <PageHeight>8.5in</PageHeight>
    </Report>

    i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
    when i click on manage for .rdl file, its throwing error , as
    "An internal error occurred on the report server. See the error log for more details. (rsInternalError)
    Object reference not set to an instance of an object.
    please help me with this

  • When error says "See the inner exception for more details."

    Errors in Power Query say "See the inner exception for more details."  How does one do this? Thanks.

    First, a disclaimer: this is behavior which exists in preview builds to help us with debugging. It is not a supported feature of the product and may change or disappear in future releases of Power Query.
    That said, to enable tracing find this registry key: [HKEY_CURRENT_USER\Software\Microsoft\Microsoft Power Query for Excel] and set TracingEnabled = 1 (REG_DWORD). You'll probably need to exit and restart Excel for the change to take effect. Log files will
    be saved under the path %LOCALAPPDATA%\Microsoft\Power Query\Traces, and separate log files are written for the code running in Excel itself and for the code running in a helper process. The trace files are quite verbose, so you'll want to turn them off as
    soon as you have the information you need.
    But I want to stress that any place where you have a bad experience is a place where another user might have a bad experience too. We'd rather fix any problems for all users than to enable individual users to troubleshoot things on their own.

  • A question about the SPOOL command in sqlplus

    Dear all,
    I have a question about the SPOOL Command and I would appreciate if you could kindly give me a hand. Consider the following sql script.
    SPOOL result.txt
    SELECT * FROM mytable;
    SPOOL OFF;This works pretty well, and the whole content of the table "mytable" is exported to the text file "result.txt". However, sqlplus prints also the number of lines
    printed after each query. As a result, after running this script, at the end of the file, I have always a line like
    "20541 lines returned"How can I avoid this line (the number of returned lines) in my result file?
    Thanks in advance,
    Dariyoosh

    Peter Gjelstrup wrote:
    Hi Dariyoosh,
    As you are about to find out, SQL*Plus is a really powerful tool once the wonders of it are discovered.
    You really should study the reference
    http://download.oracle.com/docs/cd/E11882_01/server.112/e10823/toc.htm
    In your current case especially the SET command
    http://download.oracle.com/docs/cd/E11882_01/server.112/e10823/ch_twelve040.htm#BACGAJIC
    Regards
    PeterHello there,
    Thank you very much for your attention to my problem and in particular the interesting links.
    Kind Regards,
    Dariyoosh

  • Does anyone have more detailed info on DAQ accessory Kit?

    I have read the manual that ships with it but would like more detailed information. Is there any available?

    THe box, for the most part, just gives you acces to the I/O lines of the MIO it is connected to.
    In addition, it has a thermocouple, Some LEDS and a simple freq generator.
    First check the specs on the I/O line for MIO. If you have specific questions, I'll check with one of our instructors if I can't answer from memory.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • About the V$ --  Commands

    Hi,
    I am using Oracle 10g. In this When i select the SELECT Statement i am getting the records in this V$Sysmetric, V@Sysstat and so on. At the same time when i select the another select statement, in this V$Sysmetric, V@Sysstat and so on records will be over-writing..!
    Why this is happening ?
    My requirement is, when i execute any number of SELECT statement the records will has to execute one by one in above commands and it has to be store it in one file also

    My requirement is, when i execute any number of SELECT statement, the records will be execute one by one in V$ --Tables and i want that records to be stored in one file.                                                                                                                                                                                                                                                                                                                                                   

  • Error has occurred during response.Please view the error window for more details

    Hello,
    when i am trying to add an app through sharepoint app store, i'm getting the following error below:
    Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.
    i'm using sharepoint foundation 2013 and it is installed on a VM.
    i have tried all possible solution on the internet.
    can someone help.
    thanks in advance.

    Hi ibocus,
    According to your description, my understanding is that you got an error when you used SharePoint app store in SharePoint 2013.
    Please check whether you have created and configured an App management Service application in Central Administration. If not, please create one.
    Here is an article about configuring an environment for apps for SharePoint, please take a look at:
    http://technet.microsoft.com/en-us/library/fp161236(v=office.15).aspx
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • About the ejbc

    Hi all,
    I have a stateless session bean which works fine before modification.After I
    only add a method to Remote interface and ejb class, I use ejbc -gs -iiop
    <home> <remote> <ejb> to compile them. And the compilation error occurs:
    ejb_stub_MessageLogger.java:7: class
    com.iaspec.bmx.hub.ejb.msglogger.ejb_stub_M
    essageLogger must be declared abstract. It does not define
    com.iaspec.bmx.hub.me
    ssaging.DeliveryServiceStandard getDelivStandard(java.lang.String) from
    interfac
    e com.iaspec.bmx.hub.ejb.msglogger.MessageLogger.
    But I ensure the method is defined in bothe remote interface and bean class.
    Do you need to modify the ejb-jar.xml?
    plus: I also have packaged the ejb using iAS deployment tool, it's ok! No
    error occurs.
    Thanks for your help!
    Johnson

    Did you declare the new mth as public?
    Johnson Lee wrote:
    Hi all,
    I have a stateless session bean which works fine before modification.After I
    only add a method to Remote interface and ejb class, I use ejbc -gs -iiop
    <home> <remote> <ejb> to compile them. And the compilation error occurs:
    ejb_stub_MessageLogger.java:7: class
    com.iaspec.bmx.hub.ejb.msglogger.ejb_stub_M
    essageLogger must be declared abstract. It does not define
    com.iaspec.bmx.hub.me
    ssaging.DeliveryServiceStandard getDelivStandard(java.lang.String) from
    interfac
    e com.iaspec.bmx.hub.ejb.msglogger.MessageLogger.
    But I ensure the method is defined in bothe remote interface and bean class.
    Do you need to modify the ejb-jar.xml?
    plus: I also have packaged the ejb using iAS deployment tool, it's ok! No
    error occurs.
    Thanks for your help!
    Johnson

  • About the "show"command to realize CSM loading

    Hi,
    What information about CSM loading can I get from by using "sh ip slb tech-support",and I used "show ip slb stats" (the CSM mode is csm),what's the difference of "connection destroyed" and "connection failed",any reply will be very appreciated.

    Hi,
    "Connections Destroyed" are the total number of connections that have been closed (for whatever reason). This stat should usually be close to [Connections Created - Connections Current].
    The "Connections Failed" counter is incremented when 1) The server does not reply to a client SYN request, or 2) The server responds to a client SYN request with a RST.
    ~Zach

  • How about the grep command must be written

    as the picture taking comma reference
    first to the right square brackets "["   or   open parenthesis "(" and left first square brackets "]" or open parenthesis ")"
    character style How to apply
    var doc = app.activeDocument; 
    app.findGrepPreferences = app.changeGrepPreferences = null;      
    app.findGrepPreferences.findWhat = "(\\[|()(\\.)(?=\\w)"; \\???
    app.changeGrepPreferences.changeTo =  \\???
    app.changeGrepPreferences.appliedCharacterStyle = "myChar"; 
    doc.changeGrep();
    app.findGrepPreferences = app.changeGrepPreferences = null;

    app.findGrepPreferences = app.changeGrepPreferences = null;         
    app.findGrepPreferences.findWhat = "(\\[|\\()(?=(.+, .+))";   
    app.changeGrepPreferences.appliedCharacterStyle = "myChar";    
    app.changeGrep();  
    app.findGrepPreferences = app.changeGrepPreferences = null;
    app.findGrepPreferences = app.changeGrepPreferences = null;         
    app.findGrepPreferences.findWhat = "(?<=\d|\l)\\)|\\]";   
    app.changeGrepPreferences.appliedCharacterStyle = "myChar";    
    app.changeGrep();  
    app.findGrepPreferences = app.changeGrepPreferences = null;

  • Confused about the role of ejbc in Weblogic 7

    Howdy All
    Here is my understanding of the role of ejbc in Weblogic 7:
    * Let's assume I have a JAR containing an EJB (let's say a stateless session bean).
    Let's call this the no-ejbc-JAR.
    1. I run the no-ejbc-JAR through ejbc to create the container-ejbc-JAR which can
    now be deployed in Weblogic.
    2. I can run ejbc against the no-ejbc-JAR to create a client-ejbc-JAR for use
    by clients wishing to access and use the EJB.
    Questions...
    MUST I run the no-ejbc-JAR through ejbc (to create the container-ejbc-JAR) before
    it can be deployed in Weblogic 7?
    If so, why?
    I can sort of see why this may be necessary from the containers perspective, although
    I would have thought the ejbc process could have been automatically applied by
    Weblogic to no-ejbc-JARs being deployed.
    But I am confused as to why ejbc would need to be used to create a client-ejbc-JAR.
    From the client's perspective, isn't it simply enough to have the no-ejbc-JAR
    (or a subset of the no-ejb-JAR) containing the EJB home and remote interfaces
    (along with any non-ejbc generated support classes)? For use by the client, why
    would it be necessary to run the no-ejbc-JAR through ejbc to create a client-ejbc-JAR?
    Or do I have an incorrect understanding of the role of ejbc?
    Thanks,
    Rob

    Hello Rob,
    I will try to clarify a couple of your concerns. First of all, if your EJB jar
    contains CMP 2.0 entity beans, the underlying JDBC implementations must be generated
    for your respective abstract classes of the entity beans. EJBC will generate this
    for you automatically. Also, the EJBC utility generates all of the other necessary
    server classes that WebLogic requires for deploying your EJBs (such as custom
    code for handling transactions, security, and other EJB services). When your EJB
    utilizes remote home/component interfaces, the utility will also generate all
    of the necessary client-side proxy and server-side byte code by running the RMI
    compiler on your EJBs. In addition to the above code generation that takes place,
    EJBC also checks all of your EJBs and makes sure that they are written according
    to the EJB specification. This way you will always be sure that your EJBs will
    be deployable on BEA WebLogic if EJBC returns with no error messages. You also
    asked if EJBC must be run manually before deploying the EJBs. If you run your
    application in exploded directory format, WebLogic will automatically invoke the
    EJBC utility prior to deploying your EJBs. Please refer to the links below for
    more information about the EJBC utility as well as deploying your application
    in exploded directory format:
    http://edocs.bea.com/wls/docs70/ejb/EJB_utilities.html#1075296
    http://edocs.bea.com/wls/docs70/programming/deploying.html#1125152
    Also, feel free to examine the code that EJBC generates to gain a better feel
    for what's happening behind the scenes. Also, please be aware that ejbc has been
    deprecated in WebLogic 8.1, in favor of the appc utility:
    http://edocs.bea.com/wls/docs81/ejb/EJB_tools.html#1096936
    Best regards,
    Ryan LeCompte
    [email protected]
    http://www.louisiana.edu/~rml7669
    "Rob Young" <[email protected]> wrote:
    >
    Howdy All
    Here is my understanding of the role of ejbc in Weblogic 7:
    * Let's assume I have a JAR containing an EJB (let's say a stateless
    session bean).
    Let's call this the no-ejbc-JAR.
    1. I run the no-ejbc-JAR through ejbc to create the container-ejbc-JAR
    which can
    now be deployed in Weblogic.
    2. I can run ejbc against the no-ejbc-JAR to create a client-ejbc-JAR
    for use
    by clients wishing to access and use the EJB.
    Questions...
    MUST I run the no-ejbc-JAR through ejbc (to create the container-ejbc-JAR)
    before
    it can be deployed in Weblogic 7?
    If so, why?
    I can sort of see why this may be necessary from the containers perspective,
    although
    I would have thought the ejbc process could have been automatically applied
    by
    Weblogic to no-ejbc-JARs being deployed.
    But I am confused as to why ejbc would need to be used to create a client-ejbc-JAR.
    From the client's perspective, isn't it simply enough to have the no-ejbc-JAR
    (or a subset of the no-ejb-JAR) containing the EJB home and remote interfaces
    (along with any non-ejbc generated support classes)? For use by the client,
    why
    would it be necessary to run the no-ejbc-JAR through ejbc to create a
    client-ejbc-JAR?
    Or do I have an incorrect understanding of the role of ejbc?
    Thanks,
    Rob

Maybe you are looking for

  • Mac OS 10.5 Compatibility With Adobe CS2

    I am currently operating Mac OS 10.4 and want to upgrade to 10.5 and want to know if CS2 is compatible with 10.5.  Thank you for any help regarding this question. Jerri

  • How to create logical file name

    Could some one tell me how to create logical file names in BW , and when to use the transaction SF01. Thanks

  • Itunes sees my ipod but won't allow me to manage its contents

    my fully-charged ipod is connected and itunes sees it, but everything on it is grayed out and can't be touched. i can even sync and have a new podcast move over to the ipod, but once it gets there it's grayed out and can't be touched. i can't play it

  • DVD plays at lower quality after building to dvd out of encore?

    Hi All I shoot DSLR HD video, edit in Premier Pro CS6, Dynamic Link to Encore CS6 where I build my dvd menu's ect. and export/build to DVD. But when playing the DVD back on a DVD player the quality seems quit lower than the original footage as well a

  • HT201250 Time Machine question

    Hi, everyone. I accidentally deleted a file earlier this week. I have attempted to restore this file using 3rd party software to no avail. I finally figured out how to use Time Machine, but not until after my file was lost. My question is: Can a file