About Transition in the Vista system
Hello!
I want use the DirectTransition3D Xtra, I downloaded it for
free version and try. But I feel that the PageTurn effect is nogood
in the Windows Vista system. So I want know it why and how do it,
thanks.
hi lion
after installing, before executing the SAP tutor, you must follow the steps that mention below, must first in the compatibility tab of the program select compatibility with Windows XP SP2
Windows Explorer --> folder c:\PlayerIE right click on file iTutorplayer.EXE --> Properties --> compatibility tab --> select compatibility mode = Windows XP SP2, save and play your tutors
regards
Rao
Similar Messages
-
Can sap tutor player execute in the vista system?
i have installed the sap tutor in the vista system . but when i use the sap tutor player to open .sim files it will be shut down by the system .
how can i solve the problem ? the sap tutor can not be supported to execute in the vista system?
thankshi lion
after installing, before executing the SAP tutor, you must follow the steps that mention below, must first in the compatibility tab of the program select compatibility with Windows XP SP2
Windows Explorer --> folder c:\PlayerIE right click on file iTutorplayer.EXE --> Properties --> compatibility tab --> select compatibility mode = Windows XP SP2, save and play your tutors
regards
Rao -
Where can i download the Vista system support drivers? It's only giving me the Windows 7 version...
I'm a lousy guesser so if you give more information on what year/model MPro and what MacOS version your running it'd sure help? Two different OS's two different ways to install.
If your running 10.7( Lion) then Apple no longer supports XP OR Vista and no longer makes Boot Camp drivers for them. -
Information about setting up the RAID system
I'm completely ignorant here, so you'll have to bare with me. I'm just trying to work out whether I've set things at least correctly if not optimally!
I've got a Mac Pro with four single Terrabyte disks. I've gone to the Raid utility and chosen the Raid 5 setting for maximum security. It's set this up and all be one of the Disks has disappeared.
I've gone back to the RAID Utility and clicked on the RO-1 set - there is only one now, which I'm assuming is normal. And created a volume. I created the largest one it would allow me to.
This gave me a volume of 1.47 TB
Now, to me this looks like I had four T of memory before starting this and now I have two and a half - the Disk 1 and the Raid Volume -
Is this how the system works, by creating backups in those areas I can't now see?
I'm trying to set this up for Final Cut Pro and wonder if this a useful configuration. Any comments please. So far I've no data in the system to worry about so I'm just trying to work out the best set up.I'm pretty sure I don't quite understand what you've done, but if your intent is to create a RAID 5 array of your four 1 TB drives using Disk Utility then here's what you do:
1. Open Disk Utility. Select a drive from the left side list (mfgr.'s ID and drive size) then click on the Partition tab in the DU main window. Set the number of partitions to 1 then click on the Options button. Select the GUID partition option and click on the OK button. Set the format type to Mac OS X Extended, Journaled then click on the Partition button. Repeat for all the drives.
2. Once the four drives have been formatted click on the RAID tab in the DU main window. Drag each volume (sub-entry of the drive entry) into the list box. Give the array a name, select either Striped or Concatenated RAID from the RAID type drop down menu, set the format type to Mac OS X Extended, Journaled. If you want the RAID to automatically repair itself then click on the Options button and check the box so labeled in the dialog.
3. Click on the Create button.
I would suggest creating a Striped RAID rather than a Concatenated one. You cannot create a RAID 5 array with Disk Utility. Only 0, 1, and 0+1 arrays. If you want a RAID 5 array you will need to purchase a separate RAID card such as the one Apple sells. If you want some redundancy you could create two striped RAIDS (2 drives in each array) and then create a mirrored RAID of the two striped arrays. Basically this gives a 2 TB mirrored array rather than a 4 TB striped array.
You might want to read up on RAIDs since you say you don't know anything about them. You might do this before you attempt to do a RAID. You might also think about what your actual data needs are and whether storage space is the primary concern or data backup.
RAIDs . -
I'm about to throw the whole system out the window...
iTunes said that I had too much stuff to fit on my iPod and it would make a "My iPod Selections" playlist to update from. Well, it made it, but alot of the songs I really wanted weren't put there, and the ones I could live without were put there. Frustrated, I deleted it (after messing around for a few days.) Then it said that I can no longer update my iPod because the selected playlist to update from no longer exists. So, I made a new playlist with everything i want on it. I attempted to update, and the same message showed up. I even changed the name of the setlist to be the same as the one i got mad at. still didnt take it. I realise that i probably shouldnt have deleted that setlist to begin with, but whats done is done. Anyone care to help? My iPod is currently completely empty.
iPod Nano Windows XPSee if this helps;
http://discussions.apple.com/thread.jspa?threadID=121728&tstart=150
Cheers!
-Bryan -
CMS Player 5 Sees ZenTouch in Vista System but won't display conte
I spent two days researching what to do to get my Zen Touch to work on a new Vista system:
1) I uninstalled WMP and WMP runtime from my old XP system
Note: none of the following steps went smoothly (i.e. the CMSP5 wouldn't install because I didn't have a compatible devise installed; then finally found the Zen Touch but froze up on the install until - out of frustration - I disconnected the Zen Touch and the install proceeded)
2) I uploaded new Creative Zen Touch PlaysForSure Firmware 2..0 using the XP system
(that erased all my songs on the ZT so I had to reinstall them from the XP system)
3) I installed Creative MediaSource Player/Organizer 5.0.38 onto the Vista system
4) I installed Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer onto Vista system
5) Launched CMSP5, which now sees a connected Zen Touch (i.e. ZT shows up in the Sources window)
BUT:
6) When you click on the ZenTouch, CMSP5/Vista displays the "busy" icon and fails to display the contents of the ZT
So, I'm 98% of the way to actually being able to use my ZT on the Vista system.
Can anyone tell me what the missing 2% is? That is, why doesn't CMSP5 see the ZT's contents?BTW, the ZT works fine on an XP system using same software as on Vista
-
Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?
Try disabling transitions altogether!
There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
https://en.wikipedia.org/wiki/Compression_artifact
'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
iDVD isn't really condusive to professional levels of control. -
Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?
Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/ -
windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.
Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
And Book is still available on the book-store for purchase.
(If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
(If it is the case, then you have to use the correct userID)
I hope it helps. -
Is there a way to find out details about, who approved the RMA on system using front end or back end?
But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio -
Vista system crashed due to a corrupted system file. The C drive was reformatted, and windows reloaded, along with the rest of my programs.
Before the drive was reformatted, an image was made of it on a USB drive to save all the data. Now I need to know how to get the Bookmarks back for Firefox, and the Address Book back for Thunderbird.
ThanksThanks for the quick response. It worked very well, for both Firefox and Tbird.
One hitch, until I remembered: those are all hidden files, in hidden folders. I had a devil of a time finding the "roaming" folder, until I found out how to unhide everything. In years past, I used DOS for that kind of thing. Explorer is much less user-friendly. Now that I know how to do it, it's simple.
Thanks again for the guidance -
In CIF customer exit there is no information about the logical system
Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , BarbaraFound the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards -
Error: The Operating system Windows Vista Version 6.1 is not supported
While installing Oracle Database 'win64_11gR1_database_11070' on Windows Server 2008 R2,x64, I get this error during Product specific pre-requisite checks:
"The Operating system Windows Vista Version 6.1 is not supported. Install the recommended service pack"
Edited by: aa100 on 16-Jun-2010 09:04What's not clear with this message? Windows 2008 R2 requires 11gR2:
http://www.oracle.com/technology/software/products/database/oracle11g/112010_win64soft.html
Werner -
About HR payroll posting FI in the distributed systems
Hi All,
I have a question about HR payroll post FI in the distributed system(both are Ecc6.0). There are difference In configuration between Ecc6.0 and lower version(like 4.70, 46C) ?
Best regards,
Sap leanerHi,
Please see all the difference in service.sap.com
Hope this helps,
Reward points if helpful,
Thank You, -
Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested in upgrading to Windows 7 currently.
There are still retail packs of LR 4 to be found out there - for example, on EBay. It's just important to be careful whether it's a full version, an upgrade, or a student + teacher version. And to be certain it's genuine, and has a serial number which has never been activated before. The serial number that you get with that, should work with any 4.x version of LR, on either MacOS or Windows. And it will almost certainly be heavily discounted compared with the previous price direct from Adobe.
Of course the other way is to upgrade to Windows 7 SP1, which should also be available discounted, and thus eke out the life of an older PC (I personally would not go to Win8 in such a case). Maybe pick up some RAM also, if that's a problem, provided you can do so cheaply (since that will be simply thrown away in due course, when you get a newer PC),
Using LR4 instead of LR5 you do miss out on a few nice features, as well as potentially the Raw support and lens profiles for more recent camera equipment.
LR 4 is obsolete as far as Adobe is concerned. They will not sell a Serial Number for it.
Maybe you are looking for
-
Product name: HP Envy m6 Notebook PC Product number: G5N44UA # ABA Hello, For the past couple of weeks my touchpad has the pointer moving erratically on the screen. It sometimes responds to my commands to click or to scroll, but most of the time it
-
hi, I have lightswitch project that is growing up every day. Now it has 200 database table and about 450 default screens. When I first started the lightswitch project with few tables (about 50 tables), it responses very fast. Gradually when I created
-
XFCE, window effects and other questions.
I really like XFCE mostly because it has what I need and it is really fast. Anyway, first I have activated a few effects and that is to have my inactive windows transparent and all windows titlebar it all working good. But is there any way to exclude
-
Hey, is it possible to load my Tracks, made by Logic Pro 8, to Logic Pro X ??? Thanks for help
Hey, is it possible to load my tracks, made by Logic pro 8, to Logic pro X. Thanks for your help.
-
Half of my screen is dark and i have an iphone5c
Does anyone know how to take this off?