About USB webcam and sound record

Hello,
Can I program the Labview using USB Webcam to take record and record sound in the same time??
Do any one have this type of experience??
Would you mind tell me how to build the structure to Program the software??
Any other essential software need??
Thank you!!
I will use LV7.1.

Hi HeartShield,
You should be able to acquire sound and video at the same time. You can use the sound VIs in LabVIEW to acquire sound from the microphone. There are a few options for the video. You could use the NI Vision Development Module to view the video in LabVIEW. Alternatively, you can use .NET or ActiveX if your webcam software is compatible.
NI Vision Development Module
http://sine.ni.com/nips/cds/view/p/lang/en/nid/10422

Similar Messages

My BB 8320 Camera and Sound recorder non functional

For the past year the camera and sound recorder are non functional. I have tried the following.
1.Removing the battery and SIM and rebooting.
2. Sync the BB using my Laptop Desktop Manager to sync.
3. Downloaded latest o/s available.
Nothing works. Can anyone help me?
Thanks

Hello arindamd and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're having an issue with the sound on your device.
To rule out a software issue, backup your data (see KB12487 How to back up the data on a BlackBerry smartphone) then follow the steps in KB11320 How to perform a clean reload of the BlackBerry Device Software for Windows or KB19915 Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer).
Before any software is restored test the sound recorder.
If no sound is recorded then it's likely the issue may be a hardware one in which case you will need to contact your point of sale for hardware repair options.
Hope this helps.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

i have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

sounds like ur ipod's mic is blocked with something check the back on the ipod near the back camera

Since windows 8.1 usb ports and sound are acting strange

Hello,
Since I upgraded to windows 8.1 my sound randomly stutters(very anoying) and my usb ports get turned off, only the ports that have been occupied since boot, new things work, and not reinsterting the things that were present at boot, in the same or a different
port doesn't work.
Hell, why do we pay for an OS that doesn't even work?
I expect that something as simple as an USB port or sound would work just fine.
I have installed all the latest drivers but somehow windows seems to screw things up.
When I boot up debian, I have no problems at ALL. And did I pay a dime for Debian? No, it is free.
I am getting really depressed here, paying for stuff that doesn't work.
So does anyone know any other way to fix this OS than by breaking the disc and never return to it?
Thanks in advance.

To whom are you telling that, this is an end user forum.
If you have problems than contact Microsoft in your country.
http://www.microsoft.com/worldwide/
Success
Cor

USB ports and sound have stopped working

As the subject reads, all 3 of my USB ports have stopped working and all sound. In the device manager I receive a (code 10) for realtek high definition audio. I have done everything I can think of at this point, I have even done a complete OS reinstall. Afterwards I have also updated with every possible driver file I can find from realtek and toshiba, I really don't know what else to do at this point, any thoughts? advice? anybody else with this problem?
Windows 7
Toshiba Satellite
L505D-S5983

Same here. I have an L505D that is doing the same exact thing. No sound device, all USB ports not working and the SD card reader not working either. Also when you close the lid and reopen it, the machine won't wake up. Have to restart to get it to come back. Haven't found ANYTHING in forums to help.
Sound devices, USB ports and SD card doesn't show up in the Device Manager.
Took the laptop to a local fixer-upper. Unhooked the charger, took battery out, put battery back in, then restarted the laptop without being hooked up to the charger and everything came back on. But only for a short while. After a couple of days, it does its thing all over again.
Are we looking at a mother board issue here? SURELY someone out there in cyber space has a solution.

IBM x31 pcmanfm LXDE usb disk and sound issue

How can I auto mount external USB disk
my daemon list looks like this
DAEMONS=(@syslog-ng @hal @network @net-profiles @netfs @crond @fam slim)
and modules look like this
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(e100 eepro100 mii slhc rt2x00lib rt2x00pci rt61pci ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore vboxdrv)
Also I am not able to hear no sound, I am in the audio group and ive seen channels through alsamixer
anyone else having issues
Last edited by venky80 (2009-01-22 04:16:08)

Hello Eugene,
Interesting - possible - coincidence. I just posted about a similar seeming issue here:
<http://discussions.apple.com/thread.jspa?messageID=10425731#10425731>
Notice that I've checked Disk Utility's repairs report as well as the System Log with Console: both show mention of USB related items.
This may not have anything to do with your issue but I thought it worth mentioning.

Fatality usb headset and sound set up

I recently bought the Xtreame gamer and I used a non usb headset. i heard the fatality ones were good so i bought the usb ones. i installed them and what not but the sound seems to be off. also now i cant hear that helicopter test thing when i click play for the cmss-3d... what are some tips to set up my sounds correctly? in game my ventrillo sounds change and ingame also. weird effects. i tried other headphones and they work fine. i use xp also.
Message Edited by polecats03 on 04-13-2009 12:31 AM

Yes you can.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Using usb webcam with facetime

I have a generic USB Webcam 720p connected to a USB port on my Mac Mini (2012 version) running 10.8.2. Tried using webcam on facetime, my HD monitor doesn't have webcam, for the first time. When opening FT the image from webcam displayed in the window, but when FT started connecting window went brown and hung up after a minute or 2. There were no drivers for Mac OS, but listed Mac OS X 10.5 or higher, with plug & play.
Any suggestions I would appreciate it.

I don't have the same Mac and camera as you, so I cannot test this, but it may be worth a try:
Use technique from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 about letting Photo Booth use a Firewire external iSight:
• Connect your Logitech Vision Pro USB webcam and turn it on.
• Quit Safari if it is running.
• Launch iChat.
• Open iChat's Video "Preferences..." and set the camera "Preference" to use your built-in iSight. You need not log in for video chat, but be sure your iSight video preview shows in the video Preferences pane.
• Now, with your built-in camera in use by iSight, launch Safari and test whether your Logitech Vision Pro USB webcam shows in the settings dialog box.
If you still have trouble and have not already tried restarting your Mac, modem, and (if you have one) router, see if that helps.
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.6) External iSight

Surveillance camera using USB Webcam

A project that I wanted to do is writing a Labview
application that would communicate to the USB Webcam and publishing the
application on a secured web page and allowing the users to control Labview
applications at home, work and anywhere in the world without having Labview
software installed on PC. On the web, the users can control Labview front panel
to zoom, do annotations, etc. Like a surveillance camera
the USB Webcam will be detecting an object moving, save images from when motion
was detected, trigger an alarm to alert.
I was wondering if someone can help me with this.
I have Labview Vision and I can get continuous image from the USB Webcam.
I don't know where to find information on detecting an object moving.
Can someone please help me on that?
Best regards,
Krispiekream
Solved!
Go to Solution.

Hi krispiekream!
Here is some code that I have put together. It should provide a good starting place for you at least. You will need to change the IMAQ VIs to USB IMAQ VIs. Let me know if you have any questions about the VI. Enjoy!
Kristen H.
Attachments:
Motion Track and Save to AVI.vi ‏89 KB

Sound Recorder doesnot records sound !!

Hello
i have
Hp Pavilion DV-6 6010tx
Operating System windows 7 (64-bit)
my sounds are played but the sound recorder and skype dont record sound

this is error mesage given by skype
and sound recorder dont shows any error

Tax Code and Condtion Record

HI,
I know the tax procedure of TAXINN, but i have small doubt about Tax Code and Conditon Record.
If we maintain the Tax Percentage i n the Tax Code and Condtion Record also. What is the use maintain the Tax Percentage in two menctioned placess.
Thanks,

Dear,
If you are using tax procedure TAXINN then maintain percentage in FV11, there is no need to maintain the same at Tax code level.
Br,Vivek

Can you record sound using a USB 6211 and convert the data to a .wav (or other sound) file?

Hello,
I am trying to build a system that will use a USB 6211 to record sounds from multiple electret microphones and then save the data as a .wav file or other sound file. I have already built my mics and hooked the mics up to the USB 6211; the DAQ device seems to do an adequate job recording the signal - I've recorded from 3 mics at a time at 11,025 Hz, although I don't know how good the signals are since I can't save them for playback after the fact, and they aren't going through my sound card. Ultimately, I would like to save the data as a multichannel audio file which I could then open in a program such as Audacity for further editing and analysis. Since Audacity can import a variety of sound files, my file format doesn't need to be .wav if another format would work better.
Any advice would be appreciated.
Thanks, Eric

If you are sampling all three simultaneously, your highest frequency recordable will be (11,025/2)/3, so about 1800Hz and that will pretty coarse (traditionally digital sound recording is at 44Ks/s at the low end). As to converting to a .wav, there are functions on the "Graphics and Sound" palette for saving waveforms to a .wav file.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

Problem with recording and sound on Pavilion ze1000 series

I have an old Hp Pavilion ze 1250 running Windows XP (sp2) with 1gb Ram.
I'm trying to convert some cassette tapes to digital (with Audacity).
My problem: When I try to record using Audacity, it records about 10 seconds and then hangs. When I click Stop and try to play the 10 seconds back, it freezes and won't play anything. (After that, even if I import an mp3 file to work on, it won't play that either.) It also causes all the sound to go off throughout the computer. Songs will "play" in WMP but there's no sound in the speakers or headphones. (The Microsoft logo music won't play either when I turn the computer off.) I've tried resetting the volume and checking if anything is muted. Nothing .
I restart the computer and everything is fine.....sound works and Audacity plays.....until I try to record again.
I thought that this was only an Audacity problem....until I tried to record 60 seconds through Sound Recorder. The exact thing happens. It records about 10 seconds of audio, then freezes and refuses to playback. All the sound goes off throughout the computer and nothing solves it except Restart.
My sound/audio device is Conexant AC-Link Audio.
The Sound Playback, Sound Recording, Voice Playback, and Voice Recording are all defaulted to HP VIA Audio.
I have updated the audio driver. Recording is enabled. Is there something else I need to do?
Thanks.

Thank you for your reply.
I'll try some of those suggestions and see if that helps.

I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore No       No
usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbohci Microsoft USB Open Host Controller Miniport Driver c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

About USB webcam and sound record

Similar Messages

Maybe you are looking for