Absence request workflow does not start

Hello, I have created a workflow for absence request and I configured it in transaction PTARQ for my absence type.
I tried several times making an absence request from portal but the workflow does not start. I have also seen in transaction PTARQ that the request was really made and has status SENT but has no workflow associated.
Any help?
Thanks

Hi Mário,
Check using transaction SWIA to see if the workflow is actually started by the leave creation (if not could be a problem with the event trigger)? If it is started, you should see in SWIA where the workflow stops/breaks down, normally this is due to missing container elements or bindings.
Good luck!
Gareth

Similar Messages

SharePoint Retention Policy workflow does not start

Hi,
Using Nintex workflows I have created a workflow and attached it to a content type and tested that it runs manually ok. I want it to run according to a retention policy, and so I created a policy based on one of the content type's date fields to start
my workflow automatically. When I manually run the timer jobs I see the following error in ULS logs and the workflow does not start. Interestingly if I amend the policy to do something simple like move the item to the recycle bin, that works fine.
Can anyone suggest what is wrong and where I can go from here to find the issue?
Thanks
Error running the expiration action on item <document url> . Error: System.InvalidOperationException:
The workflow with id=<workflow id > is no longer available.
at Microsoft.Office.RecordsManagement.PolicyFeatures.WorkflowExpirationAction.RunExpirationWithPostActions(SPListItem
item, XmlNode parametersData, DateTime expireDate)
at Microsoft.Office.RecordsManagement.PolicyFeatures.BaseExpirationAction.Microsoft.Office.RecordsManagement.PolicyFeatures.IExpirationActionWithPostActions.OnExpirationWithPostActions(SPListItem
item, XmlNode parametersData, DateTime expireDate)
at Microsoft.Office.RecordsManagement.PolicyFeatures.ExpirationTask.ExpirationActionData.RunExpirationAction(SPListItem
item, DateTime expireDate)
at Microsoft.Office.RecordsManagement.PolicyFeatures.ExpirationTask.<>c__DisplayClass19.<ProcessExpiredItems>b__17(SPListItem
item)
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.Office.Server.Utilities.ContentIterator.ProcessItem(SPListItem item, Boolean fIncludeFolderItems,
MonitoredScopeWrapper monitoredScopeWrapper, ItemProcessor itemProcessor, ItemProcessorErrorCallout errorCallout)

Hi,
Based on your description, my understanding is that the Retention Policy cannot start the Nintex workflow.
To narrow the issue scope, I recommend to check the things below:
Create a SharePoint 2010 Reusable workflow for the same content type or 2013 list workflow and modify the Retention Policy to start this workflow, and then check how it works.
Create Retention Policy with the Nintex workflow in another list and then compare the results.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Sharepoint 2013 workflow does not start when item is created by another workflow

Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that creates a new item in List B. The problem is that when
de workflow in list A creates the list item in list B the workflow does not start.
I've used an account that is collection owner, an account that only has contribute permision and nothing works.
Any ideas?
0down
votefavorite
Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that creates a new item in List B. The problem is that when de workflow
in list A creates the list item in list B the workflow does not start.
I've used an account that is collection owner, an account that only has contribute permision and nothing works.
Any ideas?
0down
votefavorite
Hi I am having the next problem, I have a workflow on list B that starts when a new item is created. If I created the item manually the workflow works. Now I have a list A that has a workflow that
creates a new item in List B. The problem is that when de workflow in list A creates the list item in list B the workflow does not start.
I've used an account that is collection owner, an account that only has contribute permision and nothing works.
Any ideas?

Hi Courfeyrak,
Here is another similar post with a workaround, you can try using the event receiver on listB item to start the workflow, when the listB item is created or updated by the workflow associated with listA.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/19f71e38-7c04-430e-aa6b-764cbbf18c1c/2013-workflow-does-not-start-on-item-created-by-a-different-worklow?forum=sharepointcustomization
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Workflow Does not Start If Created by Another Workflow

Hi,
Hope someone can help me here.
I am using SharePoint 2013 Server and have created two workflows running on two separate lists (workflow 1 runs on list 1 and workflow 2 runs on list 2).
Workflow 1 creates an item in List 2. The workflow on list 2 does not kick off when the item is created.
I have tried both SharePoint Designer 2013 workflow and Visual Studio 2013 no code solutions (I have elevated privileges for the workflow app).
The link below is what I am experiencing, although there doesn't seem to be a solution.
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/cb7c2537-ec54-4128-abea-aa5a11cddb54/sharepoint-2013-workflow-does-not-start-when-item-is-created-by-another-workflow?forum=sharepointcustomization
I am in the process of installing the latest CUs too see if this has been rectified.
Thanks,
Nigel

Hi Nigel,
Yes, this is the default SharePoint behavior that SharePoint 2013 workflow does not start when item is created by another workflow.
For a workaround, you can create a event receiver on the List 2 to start the workflow 2 when an item is created.
Reference:https://social.technet.microsoft.com/Forums/sharepoint/en-US/19f71e38-7c04-430e-aa6b-764cbbf18c1c/2013-workflow-does-not-start-on-item-created-by-a-different-worklow?forum=sharepointcustomization
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/6ee7d704-34c0-4bda-8f2d-8a9ba17c2367/sharepoint-2013-workflow-using-create-item-to-add-an-item-to-another-list-and-have-the-workflow?forum=sharepointcustomization
Best Regards,
Eric
Eric Tao
TechNet Community Support

Workflow does not start when PowerShell Script is run from Task Scheduler

I have a PS script that updates an item in a SP2010 list so that a workflow will be started. When I run the PS script manually from the PS window on the server it resides, the script runs flawlessly. If I set a scheduled task on the same server
to run the script with the same credentials as are being used in the PS window, the script runs, updated the info on the list, but DOES NOT start the workflow. As we know, SPD workflows cannot be started by anonymous or system accounts. It is as
if the task scheduler adds a bit of information that makes the SP2010 list think the information was updated by one of these accounts even though the field in the list for the item being updated shows the correct account.
HELP!!!
D

Hi,
The issue might be related to the script or schedule task settings your configured. You’d better check the settings.
For example, which option do you set to run the scheduled task? You may select “Run whether user is logged on or not” instead of “run only when user is logged on” as shown in this article:
http://blog.pointbeyond.com/2010/04/23/run-powershell-script-using-windows-server-2008-task-scheduler/
Hope it helps.
Best Regards,
Sally Tang

Workflow does not start automatically on create item (yet another time)

The topic has been discussed broadly throughout different forums, but I didn't find the solution to my issue yet and hope you can help me out with ideas to sidestep the difficulties created by Microsoft.
I have one list 1 in Site Collection A, and one list 2 in Site Collection B (PWA site collection). I need to copy an item from list 1 to list 2 with some values. I use a "Call http web service" action to accomplish
that as I need to copy informatin cross site collections.
The "Call webservice" is in an App Step, because the user creating an item in list 1 does not have permissions on list 2. Thus, my item is created "by workflow" (not "by System Account") in list 2. Now I need a second
workflow to start on list 2 which will create a project in Project Server.
As I am working across 2 site collections, I can not use a SharePoint 2010 workflow with impersonation step for list 1 as the "Call a webservice" action is not available for SP2010 workflows and "Copy item" only works in the same site.
In Nintex I can impersonate the web service call - is this also somehow possible for SPD2013 workflows? Or is there any other possibility to get over this silly restriction of workflows not starting automatically on System account created items? Someway
perhaps to tweak the App Step in impersonating with another user account?
Any help appreciated!
I really can't understand, that this common requirement is still not solved by Microsoft :-( I found more threads on the topic than I can count, so this seems to happen quite often... at least they should finally offer a proper way of doing some kind
of impersonation with the calls so we have a chance to change the creating user account.

Hi,
As I understand, you would like to use workflow to copy list items cross site collection.
So far it is not supported with OOB workflow option, here is an codeplex workaround:
https://spdactivities.codeplex.com/wikipage?title=Copy%20List%20Item%20Extended%20Activity
Please check if it can be help.
Regards,
Rebecca Tu
TechNet Community Support

2013 workflow does not start on item created by a different worklow

hi :)
i have spd created reusable workflow 2010 on a list A creating an item in a list B.
on that list - B - there is a 2013 spd reusable workflow which is supposed to start on item created but does not.
the workflow does start manually.
and it does start when I create an item manually.
if i check a 2010 wf on the same scenario - it starts o.k.
the item "created by" is the user who triggered the workflow - not the system account.
anyone??
thanks !

The first thing I'd ask is if the workflow on list b is set to trigger when a new item is created. If this has been set correctly, I'd try running the step within Workflow A which creates the list items under an impersonation step. This subs
in the account details of the workflow author and as such should trigger workflow b.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Workflow does not start for Offline triggered SHC

Hi,
I have a problem with getting the Workflow started during offline uploading of shopping cart from XI.
When I check on the BBP_PD status of the document, and there is no workflow started wherein when Shopping cart is done thru SRM Online, the n-step wfl approval is running correctly.
Any ideas on where I could check/configure settings to allow workflow to start during Offline upload from XI?
By the way, a function module BBP_SAPXML1_EXTREQU_UPDATE_IN is called to populate SHC data from Offline to SRM. Thus when this is ran, the document is now in the BBP_PD.
Thanks!
Cindy

Hi Cindy,
What I feel that you need to use BADI for this Separate Determination Method for List of Approvers via BAdI BBP_WFL_APPROV_BADI in WS14000133:
In Start condition,make this BADI trigger in all the cases.Condition should be like
BUSINESS Object = Shopping Cart
Then determine the requirement that is shopping cart coming from someother system,that data will be some RFC destination or some generic id..as requirment from Plan driven scenario flow into SRM system with generic id from backend.
and based on that trigger approval process.
regards,nishant
please reward if this helps

Workflow does not start on a event: document copied in from another library's workflow.

I'm using SharePoint Online for Office 365.
I have a workflow that initiates as soon as a new item is added to a folder. That workflow gets approval from a group of people. Then copies the document to a new folder and deletes the original.
I have another workflow set to initiate as soon as a new document is created or changed that gets approval from a second set of users and moves the document again.
Problem: Both workflows work great on their own. The problem i'm having is the second workflow doesn't initiate when the document is moved. There's apparently no way to trigger a workflow from within a workflow. Is there a way to edit the data in the current
item after it's moved to trigger the second workflow?
Also, I tried to nest the second workflow within the first but it didn't link the document to the second workflow.
Any help is appreciated.

From what I'm told, this is purposeful. It's to protect the user from firing a million workflows on accident. I believe you can run an impersonation step (requires 2010 workflow) on the document moving part and it will then successfully fire.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Workflow does not work properly

Hi experts,
I had configure approval process for my folder. The problem is when i upload a file, there is no email sent for approval. I have a FSDB repository. What went wrong? Appreciate any suggestions.
Thanks,
Nanie

Hello,
Workflow does not start automatically by uploading documents.
You have to Submit for Approval these documents.
Regards
BP

Listener (and database instance) does not starts up automatically: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

Hi at all.... I'm a newbie with database oracle.,
I have the follow problem:
I installed Oracle Database 11g R2 XE on my guest operating system CentOS 6.5.
I have changed the hostname in my SO CentOS (where is installed oracle 11g R2 XE) after installation was completed successfully.
-) Before and during installation the hostname was localhost.
-) After installation I changed the hostname in VMCentOS
From the moment I changed the hostname, nothing starts up automatically. In particular, the listener and the database instance does not starts up automatically.
When I starts up the listener manually and I try to connect to database instance with SQLPLUS i get this error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
I think that the problem is due to the changed hostname because I, for testing and debugging purpose, re-installed a new OS CentOS virtual machine, re-installed oracle database 11g and I have not got that problem. The database instance and the listener starts up automatically!
Can any one tell me if maybe the problem is related to the hostname changed? ... and Why?
P.S.: After changed the hostname I have also modified the listener.ora and the tnsnames.ora by modifying the HOST with the correct hostname.

-) Output of command chkconfig (there isn't any line oracle-xe 0:off   1:off 2:on 3:on 4:on 5:on 6:off):
[oracle@VMCentOS /]$ chkconfig
NetworkManager     0:off    1:off    2:on    3:on    4:on    5:on    6:off
abrt-ccpp          0:off    1:off    2:off    3:on    4:off    5:on    6:off
abrtd              0:off    1:off    2:off    3:on    4:off    5:on    6:off
acpid              0:off    1:off    2:on    3:on    4:on    5:on    6:off
atd                0:off    1:off    2:off    3:on    4:on    5:on    6:off
auditd             0:off    1:off    2:on    3:on    4:on    5:on    6:off
blk-availability    0:off    1:on    2:on    3:on    4:on    5:on    6:off
bluetooth          0:off    1:off    2:off    3:on    4:on    5:on    6:off
cpuspeed           0:off    1:on    2:on    3:on    4:on    5:on    6:off
crond              0:off    1:off    2:on    3:on    4:on    5:on    6:off
cups               0:off    1:off    2:on    3:on    4:on    5:on    6:off
dnsmasq            0:off    1:off    2:off    3:off    4:off    5:off    6:off
firstboot          0:off    1:off    2:off    3:on    4:off    5:on    6:off
haldaemon          0:off    1:off    2:off    3:on    4:on    5:on    6:off
htcacheclean       0:off    1:off    2:off    3:off    4:off    5:off    6:off
httpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
ip6tables          0:off    1:off    2:on    3:on    4:on    5:on    6:off
iptables           0:off    1:off    2:on    3:on    4:on    5:on    6:off
irqbalance         0:off    1:off    2:off    3:on    4:on    5:on    6:off
jexec              0:off    1:on    2:on    3:on    4:on    5:on    6:off
kdump              0:off    1:off    2:off    3:on    4:on    5:on    6:off
lvm2-monitor       0:off    1:on    2:on    3:on    4:on    5:on    6:off
mdmonitor          0:off    1:off    2:on    3:on    4:on    5:on    6:off
messagebus         0:off    1:off    2:on    3:on    4:on    5:on    6:off
netconsole         0:off    1:off    2:off    3:off    4:off    5:off    6:off
netfs              0:off    1:off    2:off    3:on    4:on    5:on    6:off
network            0:off    1:off    2:on    3:on    4:on    5:on    6:off
ntpd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
ntpdate            0:off    1:off    2:off    3:off    4:off    5:off    6:off
portreserve        0:off    1:off    2:on    3:on    4:on    5:on    6:off
postfix            0:off    1:off    2:on    3:on    4:on    5:on    6:off
psacct             0:off    1:off    2:off    3:off    4:off    5:off    6:off
quota_nld          0:off    1:off    2:off    3:off    4:off    5:off    6:off
rdisc              0:off    1:off    2:off    3:off    4:off    5:off    6:off
restorecond        0:off    1:off    2:off    3:off    4:off    5:off    6:off
rngd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
rsyslog            0:off    1:off    2:on    3:on    4:on    5:on    6:off
saslauthd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
smartd             0:off    1:off    2:off    3:off    4:off    5:off    6:off
snmpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
snmptrapd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
spice-vdagentd     0:off    1:off    2:off    3:off    4:off    5:on    6:off
sshd               0:off    1:off    2:on    3:on    4:on    5:on    6:off
sysstat            0:off    1:on    2:on    3:on    4:on    5:on    6:off
udev-post          0:off    1:on    2:on    3:on    4:on    5:on    6:off
vmware-tools       0:off    1:off    2:on    3:on    4:on    5:on    6:off
vmware-tools-thinprint    0:off    1:off    2:on    3:on    4:on    5:on    6:off
wdaemon            0:off    1:off    2:off    3:off    4:off    5:off    6:off
winbind            0:off    1:off    2:off    3:off    4:off    5:off    6:off
wpa_supplicant     0:off    1:off    2:off    3:off    4:off    5:off    6:off
[oracle@VMCentOS /]$
Moreover in /etc/sysconfig there isn't any file oracle-xe!!!
At this point, I suspect that something in the installation I mistook.

Workflow notificaiton mailer Does Not Start, Remains In Status Starting

Hi Gurus,
Workflow notification mailer is not getting started and its showing status starting.I have tried to bounce the service componets still its showing starting.My application version is 12.0.6 and OS is AIX.I got a metalink reference"Notification Mailer Does Not Start, Remains In Status Starting [ID 371830.1]".Since its a Productin instance can we try it??Please suggest.Couldnt understand what will be the impact of updating wf_event_subscriptions.Please suggest/help...
Thank you so much...!!

994272 wrote:
Thanks Hussein,
From the logfile I got the following error.
[Mar 16, 2013 2:48:36 AM EDT]:1363416516284:-1:-1:ios1402e.idc.ikon.org:10.81.42.25:-1:-1:1:20420:SYSADMIN(0):-1:Thread[GSMQueueProcessor,5,main]:2021231295:40299:1363412471938:4:PROCEDURE:[SVC-GSM-WFALSNRSVC-4786418 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:BEGIN (noEvent)
[Mar 16, 2013 2:48:36 AM EDT]:1363416516284:-1:-1:ios1402e.idc.ikon.org:10.81.42.25:-1:-1:1:20420:SYSADMIN(0):-1:Thread[GSMQueueProcessor,5,main]:2021231295:40299:1363412471938:4:STATEMENT:[SVC-GSM-WFALSNRSVC-4786418 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:Did not receive any control events.
ThanksYou can follow the steps in (Notification Mailer Does Not Start, Remains In Status Starting [ID 371830.1]).
Thanks,
Hussein

Workflow WS40000014 not starting

HI there everyone.
We are implementing SRM 7.0 and we are going thru the initial configuration and run through in our Sandbox system.
We are able to create shopping carts and we are using the default process controlled workflow.   The event linkage is activated properly and yet there are no work items created.
/SAPSRM/CL_WF_PDO     READY_FOR_RELEASE     SRM_PROCESS_START
/SAPSRM/CL_WF_PDO     READY_FOR_WORKFLOW     WS40000014
I can see this event raised in SWEL, with these two handlers:
1) /SAPSRM/CL_WF_PDO_SC     READY_FOR_RELEASE     SRM_PROCESS_START Internal RFC (Method Call)2) /SAPSRM/CL_WF_PDO_SC     READY_FOR_RELEASE     SRM_PROCESS_START          /SAPSRM/CL_WF_PROCESS_EXEC=>BI_EVENT_HANDLER_STATIC~ON_EVENT
The second second event have has this message:
Save function not executed as no modified data could be determined
Message no. BBP_PD505
Any ideas?
Thanks in advance for your help.

Hi,
Pls check
Java Mailer wont start OPEN_MAIL_FYI=The requested template does not exist [ID 331358.1]
or
Run script afsvcpup.sql to update parameter : Open FYI Notification
to WFMAIL:OPEN_MAIL_FYI.
Using the script one can verify this is the problem as the output returns...
You have selected parameter : Open FYI Notification
Current value of parameter :
Simply enter the required field at the prompt
Enter a value for the parameter : WFMAIL:OPEN_MAIL_FYI
afsvcpup.sql - AF SVC Parameter UPdate script
DESCRIPTION
Script to update GSC Component Parameters in case the UI is not
available for some reason.
USAGE
sqlplus apps/apps @afsvcpup.sql
** WARNING **
DO NOT RUN THIS SCRIPT UNLESS DIRECTED BY ORACLE SUPPORT !!
Thanks,
Nitin

The requested resource does not exist - EAR - Jsp

Hy!
Following a tutorial I'm trying to create a small application in the Developer Studio.
I created a Table, an EJB-Project with an Entity Bean and a Stateless Session Bean, a Web-Project with a JSP-File and an EAR which I deployed. Now the JSP form should be available at http://[server-name]:50000/employee/view.
But I get:
404   Not Found - SAP J2EE Engine/6.40
The requested resource does not exist.
Details:     Go to main page of this application!
"main page" is a link which refers to http://localhost:50000/index.html which is the SAP Engine Start Page.
This is my first experience with sap netweaver. So I don't know where I should start to search for the problem or how to solve it.
In the web.xml of the WebProject there is the following code for the servlet mapping:
<servlet>
     <servlet-name>NewEmployee.jsp</servlet-name>
     <jsp-file>/NewEmployee.jsp</jsp-file>
</servlet>
<servlet-mapping>
     <servlet-name>NewEmployee.jsp</servlet-name>
     <url-pattern>/view</url-pattern>
</servlet-mapping>
This is the code in the application.xml of the ear which should make it possible to access the webproject under .../employee.
<module>
     <web>
          <web-uri>EmployeeWeb.war</web-uri>
          <context-root>employee</context-root>
     </web>
</module>
Best Regards,
Carina

Hy!
I tried several changes and found out, I just had to remove the ' / ' bevor NewEmployee.jsp in the jsp-file - tag.
<servlet>
     <servlet-name>NewEmployee.jsp</servlet-name>
     <jsp-file>NewEmployee.jsp</jsp-file>
</servlet>
Now it works and I'm able to test the jsp. There's a form and after a submit a jndi-lookup is performed.
Object ref=jndiContext.lookup("java:comp/ev/ejb/EmployeeService");
It seems the EJB reference in the web.xml:
         <ejb-ref>
          <ejb-ref-name>ejb/EmployeeService</ejb-ref-name>
          <ejb-ref-type>Session</ejb-ref-type>
          <home>com.sap.bsp.EmployeeServicesHome</home>
          <remote>com.sap.bsp.EmployeeServices</remote>
          <ejb-link>EmployeeEjb.jar#EmployeeServicesBean</ejb-link>
     </ejb-ref>
doesn't work, because I get:
com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/ev/ejb/EmployeeService.
Looking forward to a hint
Best regards,
Carina

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Absence request workflow does not start

Similar Messages

Maybe you are looking for