AC5.3 ONLY on ABAP Stack

Hi experts,
we want to upgrade our GRC AC 5.1 (no Java active) to 5.3 with the ABAP system only (only upgrade to GRC 5.3 for RTA ABAP), and follow the known steps to try to import our company defined risks (global company ruleset) definition to the upgraded AC5.3.
However, even when we'll have uploaded these risks into the upgraded GRC system, anybody can suggest how will we be able to verify that the result is correct/successful?
please kindly help - thank you
Eddie-HaoNing Chen
Edited by: Rossana Ricco on Dec 2, 2010 6:46 PM

Hi Rossana,
Will try to explain... sorry if it confuse you.
Now all GRC AC 5.x versions consist of two parts (as you all know) - Java Stack and ABAP stack.
the part which goes into ABAP stack is VIRSANH & VIRSAHR.
VIRSAHR should be installled if you have SAP_HR component in you system (even if you don't use it).
Now VIRSANH & VIRSAHR consit of :
1. ALL the BAPI which connect to RAR, CUP, SPM & ERM on JAVA stack.
2. Contain 'AS-IS' from VIRSA 4.0 i.e. all the code related to Compliance Calibrator 4.0, Firefighter 4.0, Risk Terminator & even Role Expert.
Now where is the problem.
Problem is that SAP had stopped all development (bug fixes) on CC 4.0 & Role Expert.
Suppose you upgrade to AC 5.3, means you install VIRSANH 5.3, and you have a bug in CC 4.0, SAP will NOT fix it.
So kindly cross check with SAP first and only then upgrade to VIRSANH 5.3.
Else you are as good on 5.1, reason being there is not much functionlity change from CC 4.0 to VIRSANH 5.1 to VIRSANH 5.3.
Hope you get my point.
Even then if you are willing to upgrade then, I don't think you will face any issue. As there is no table structure change. Just download from Toolbox all the table.
download Global ruleset, all the five Rule matrix, all mitigation data.
Regards,
Surpreet

Similar Messages

Whether BSP can work only on ABAP Stack

Hi
Please let me know, whether BSP can work only on ABAP Stack.
If Yes, is there any configuration needs to be done
Regards
Madhan D

Yes Business Server Pages are specific to the ABAP stack.
All config details can be found in the SAP Online Help and the Wiki.
Cheers
Graham Robbo

Configuring Adobe Document Services using only the ABAP stack

Hi experts!
Would it be possible to configure ADS if your SAP system has no Java stack, and without having to connect it to another system that has a Java stack or portal?
We've come across a how-to-guide here in SDN about offline interactive forms; in its introduction we are told that in fact the ADS comes included with WAS 6.40, but it doesn't specifically tell how to configure it. There is also the possibility that we misunderstood that statement though.
If anybody got ideas, kindly let me know. Any help will be appreciated.
Thanks,
Joseph

Yeah, the illustration in http://help.sap.com/saphelp_nw70/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm -> Architecture give this point as well.

Can you do webreporting with WAS6.40(only ABAP stack)

Hi gurus,
I have one question:
Is it possible to do webreporting with a WAS6.40(only abap)without a java stack. Only the ABAP stack is installed.
So design/publish reports with the BEx Web Application designer
Thanks for your reactions in advance.

Hi,
Till BW Version 3.5 it should be possible because the Webreporting Enviroment is fully written in ABAP.
In BI 2004s i know that same things are written in Java, so i think it will not work.
Regards
Marcus

NW04 system copy : we only need the abap stack

Hello,
We have a BW 3.5 Production environnement :
Netweaver 04
Oracle 9.2
ABAP + JAVA stack have been initially installed on the same server but the java instance parameters have been since deactivated. The Java stack has never been used.
Now, we're planning to install the same BW 3.5 QAS environnement (only the abap stack), configure it, and afterwards perform a typical homogeneous system copy (backup/restore) from the production environnement.
Since we don't need at all the java part, do you think that could work ? Is there any risk of inconsistency ?
Or do we have to install double a stack QAS enviroonement and then perform the system copy based on sapinst
Thank you in advance for your help.
Regards.

You will have to perform following steps
1. Export the CI system on Source system
2. Clone the source Database to Target database. We have used IBM's Flash copy tool to accomplish that.
3. On target install SCS , restore the DB and then import CI.
We also have dual stack in ECC Production environment and we don't use JAVA as much.
If you have any more questions, please let me know.
Thanks
Sumit Mathur

Publishing a Web ABAP Service with ABAP stack

Hi,
We are only running ABAP Stack (we don't have Java Stack) in a SAP ECC 6.0 version.
We have a RFC (or BAPI), for instance BAPI_CUSTOMER_GETDETAIL.
How could we publish a Web ABAP Service?
Thanks.
Regards,
Marta.

Hi,
I think this could be possible,
refer below links
Working With Web Services From ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a4433436-0301-0010-f2a9-9281ad574054
ABAP Web Services in the Real World
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
Journal Part XIII: Developing ABAP WebServices
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices
SAP Network Blog: BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Thanks
Swarup

Can we create Interactive forms only with ABAP & without using GP, or Java

Hi,
I would like to know if we can create Interactive forms only with ABAP & without using GP or Java. We want to develop an offline solution using Interactive forms, but would like to use only ABAP for creating the forms. All the documents so far either refer to creating the forms, in reference to / in sync with: ISR (Service Requests), GP (General Procedures) or Java. Can this be done with ABAP alone?
Regards,
Ramesh
Edited by: Ramesh Nallabelli on Apr 16, 2008 12:02 AM

Hello Ramesh,
You should be able to create Adobe Interactive Forms using only the ABAP stack (without GP, Java, etc). Please refer to the thread below. Hope it helps.
Re: help for-offline interactive forms based on sending receiving mails in ABAP
Regards,
Rao

Firefighter on ABAP stack

Hello All,
I have a query regarding the Firefighter (GRC V5.2) component in the Access Control Suite of SAP GRC. I heard that Firefighter works only for ABAP stack and not for Java stack. Clearly what is ABAP stack & Java stack?
And is this the same case with Superuser Privilage Management(GRC V5.3) as well?
Regards,

Hi,
Each Access Control product requires the following two components:
A common ABAP-based component that resides on your SAP ERP server. This component is called a u201CReal-Time Agent,u201D or RTA. The RTA accesses data from your SAP system and communicates with the front-end Java component, to allow you to see and make changes to that data.
A Java-based component that resides on your web application server. This component provides the user interface you use to make changes in your SAP database. The Java component sends data queries and revised data to the ABAP component, which connects directly to the SAP database.
In Firefighter , The configurations will be done in abap stack using /virsa/vfat tcode. Only reports can be seen in java front end. But in other Components we do configurations in java stack.
I hope this helps you.Please allot points is this helps you.
Thanks,
Joseph

Configuring ADS for ABAP stack

Hi,
I am trying to configure ADS for my ECC 6.0 server. It has only ABAP stack. WHen i execute the test report FP_PDF_TEST_00 with sa38 it gives me the following error:
Test Program: Version Information (for Analysis Only)
USAGE ERROR
ERROR CODE : 2
ERROR MESSAGE : ADS
Invalid HTTP connection: ADS
I do not understand how to create the RFC connection ADS since this is only an ABAP stack.

Hi Sridevi
Olivier is right, You need to have ADS configured on Java stack.
Check out the following links for more:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fd998b-494f-2b10-c2ab-e3513a857f62
and
ADS connection test in ABAP failed with ADSUser
and
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_wiki&query=timesheet&searchmode=similar&similardocsuri=/wiki/sdn_wiki/wiki/display/emtech/how%2bto%2bconfigure%2bssl%2bfor%2bwebdynpro%2bjava%2band%2bbi
I hope this helps
Regards
Chen

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP stack only

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP Stack
Dear Portal Gurus,
we want to integrate SAP BW Bex Queries 7.3 into an Enterprise Portal 7.3 EP ABAP Stack only installation.
1) We have Done SSO between EP And BI System
2) System Object is Created
3) When we trying to create Iview of BEX 7.3 report, its executing that report on BI server, we don't have java stack on BI System
4) We have updated the required table in Bi system for executing the report on EP
5) RFC is OK, System Object Test is OK, Report is working independently from Business Explorer, but not working from EP
There no irj services available on BI system, as it is only ABAP stack.
Can anybody help us in achieving our requirement
Thanks in advance
Michael Wecker

Hi Michael,
To integrate portal with BI you need to perform BI Portal integration steps.
Refer to a document link below for guidance purpose.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?overridelayout=t…
Ensure that you have performed all these relevant steps.
Hope this helps.
Regards,
Deepak Kori

XI with ABAP stack only ?

Looking at some very annoying problems with the XI Java Stack and applications (stability, memory consumption), following question comes to mind:
is it technically possible to run an XI system without the Java stack ? How much functionality do we have in there, can we do customers projects with that ?
In ABAP stack, we have the following functions:
- Business Process Engine
- Integration Engine
- HTTP Adapter
- IDoc Adapter
- ABAP-Mapping (XSL or handmade)
also, we have of course the functionality of using File/FTP,Mail in ABAP. This means the most important adapter types are available in ABAP (without needing the Java adapter engine).
Of course the Integration Builder is not available then. But do we really need it ?? Same applies for the SLD.
Are the pipeline objects (receiver determination, interface determination and so on) stored in the ABAP stack ? I assume that is the case. Does ABAP stack contain the XI message type objects ? Or is that stored in Java ?
Anyone tried that path ? Is it already failing in the installation because some core XI ABAP components require Java parts ? Or would it work ?
Of course the answer depends on "what do we define to be XI". For me it is the core integration engine with the pipeline architecture plus mapping and proxy extension points. Everything else (e.g. tools) needed can be built around it.
Customer benefits would be: focus on ABAP only (Java knowhow not needed), easier administration and more stability.
CSY

Hello Jaishankar,
> there is no transaction to replace Visual Admin (NWA from >PI7.1) functionality.
question: suppose we are not using the J2EE stack of XI, do we need the NWA ? Does NWA also contain important functions which control/configure the ABAP stack ?
>I would say Java and ABAP stacks are very tightly coupled >to each other and it would take ages to understand how >tightly it is coupled.
this would be quite bad design then. But you may be right. Current cross-calls from ABAP to Java I know:
- call Java-Mapping from ABAP pipeline. If we do not need Java mapping, this call is not needed. In ABAP, we have ABAP and XSLT mapping options
- other ? What else ? I am talking about runtime execution (pipeline), not designer tools
>For example XI is a client of SLD which runs on Java stack, >how do you think you can replace the functionality of SLD via
yes. But what does XI need from SLD ? Business systems, target transports, ok. It's a handful of objects types which can easily be maintained in the ABAP stack also. For customers which are using the SAP portal or other Java components (apart from XI), of course, that makes no sense. But for smaller customers which do not use portal: for what do they really need that SLD ? I have seen one customer recently who didnt know about the transport targets and so maintained the IR objects on the productive system manually. More an education issue, but it shows a bit that the SLD for some customers is overkill.
>improvised and will be done in the future versions. The long >term plan is to make XI a complete Java based tool. All the >developers tools will be accessed via NWDS in future"
yes, I heard that also, and it is very interesting in fact. We will see what happens
thanks for your input,
CSY

LDAP Configuration for ECC 6.0 ( ABAP Stack only)

Hi,
Can any one guide me with the steps for the LDAP Configuration for ECC 6.0 ( Abap stack only).
Some of my observations are....
I can see the LDAP Support in the Installation master at the following path.
1. Additional Software Life cycle Tasks --> Application Server --> LDAP Support.
But the prerequisites for this task is given as "You must have extended the LDAP schema for the sap data types before.".
When i am goint thru service market place i came across the following note.
Note 888848 - Notes on schema enhancement with RSLDAPSCHEMAEXT.
Thanks,
Tanuj

Dear All,
We are trying to configure the LDAP using with active directory . In the
step of "Synchronization of SAP User Administration with LDAP
Directory"when executing the report"RSLDAPSYNC_USER" we are facing one
error.
Please find the trace file and error screenshot in the attachment.Please help us on
priority.
Please find the Trace log in the below:
RFC destination : LDAP_LDAPSE-01
Tracelevel      :      8,704
F5: Shutdown F6: Clear list F7: Dump status F8: Refresh list
[Wed Jun 26 11:15:38 2013]
Slot 0 (WIPROTECH): >>> ldap_initU(host="abg-mumabc-dc1.abgplanet.abg.com", port=389)
[Wed Jun 26 11:15:39 2013]
Slot 0 (WIPROTECH): <<< ldap_initU() == <NOT NULL> := connected
Slot 0 (WIPROTECH): >>> ldap_set_option(version=3)
Slot 0 (WIPROTECH): <<< ldap_set_option() == 0
Slot 0 (WIPROTECH): >>> ldap_simple_bind_sU(dn="poornataad", password: not initial)
[Wed Jun 26 11:15:40 2013]
Slot 0 (WIPROTECH): <<< ldap_simple_bind_sU() == 0 := success
[Wed Jun 26 11:15:43 2013]
>>>>Required attributes table
Line    0: "CREATETIMESTAMP" (length 15)
Line    1: "MODIFYTIMESTAMP" (length 15)
Line    2: "SAPUSERNAME" (length 11)
<<<<Required attributes table
Slot 0 (WIPROTECH): >>> ldap_search_sU(base="CN=poornataad,CN=Users,DN=abgplanet,DC=abg,DC=com", filter="(&(OBJECTCLASS=user)(SAPUSERNAME=*))", scope=2)
Slot 0 (WIPROTECH): <<< ldap_search_sU() == 91
>>> ldap_msgfree()
<<< ldap_msgfree()
Slot 0 (WIPROTECH): >>> ldap_unbind_s()
Slot 0 (WIPROTECH): <<< ldap_unbind_s() == 0
Please find the error screenshot in the below.
Regards,
Dilip Sampath.CH
+91-9619735957.

NW MI 7.1 has only ABAP stack. what about JAVA stack ?

Hi,
Recently i installed NW MI 7.1 EHP1 system. It has only ABAP stack. But for MI configuration i hope we require JAVA stack too.
Hence can we use some other standalone JAVA system for the MI front end configuration ? If so please tell me what are the usage types are required for that Standalone JAVA.
Thanks & Regards,
Bala

Hi,
EPC or standard AS Java usage types would be required for MI configuration.
Suggest you to go through the Master guide at https://service.sap.com/~sapidb/011000358700000391152007E.pdf
Also more info at http://service.sap.com/instguides ->SAP Netweaver -> Netweaver Mobile 7.1
Regards,
Srikishan

Activating ADS in ERP for only ABAP stack is possible???/

Hi frnds,
Our ERP system is standalone ABAP stack only.
is it possible to use ADS in only ABAP Stack????
Regards,
Balu

ADS is a service that runs on top of the JAVA stack. The ABAP stack communicate with it on a low level via messaging (SOAP). Therefore, ADS requires a JAVA stack.
However, this is NOT a bad thing. Typically, because:
(1) ADS requires high system and OS resources, you will run it standalone
(2) Running on a separate server (or distributed server) allows you to upgrade ADS/Java stack independently of your other servers if need be
(3) allows for high volume and batch printing/access
Sooooo...you can install a NW AS Java stack by itself and run ADS from there. Once registered in your SLD, your ABAP server can "find" ADS.

How to get a dynamic receiver determination based on a table an SAP PI ABAP Stack

Hello folks,
currently I get stuck dealing with a problem about the receiver determination. Let me first describe the Problem: We are using to different SAP ERP- backend system in our test enviroment. But only of this systems is marked as current "actuall" test system. Every once in a while we need to switch between these two systems and mark the other one as the actual test system.
This is the point were it get's a little bit time consuming for me: We have about 50 interfaces were I need to change the receiver from test system A to test system B or vice versa. So I thought about creating a more dynamic way to determine the actual test system:
Therefore I have created a table on the ABAP stack of our PI (7.31 double stack) with just one field that holds the current test system. Now I would like to create a dynamic receiver determination where I call the RFC-function RFC_READ_TABLE. But how can I acess a table from the grapchical mapping of the pi which is stored on the PI?
Is there mybe another fundamental way to retrieve the actuall test system within the mapping?

You can go for enhanced receiver determination, where in you can determine the receiver system using a graphical mapping.
Now in that graphical mapping, use the standard function " RFC Look up" and make a call to bapi and get the actual receiver system.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40b64ca6-b1e3-2b10-4c9b-c48234ccea35?QuickLink=index&…
Step by Step guide to Explain Enhanced Receiver Determination - Application Server Infrastructure - SCN Wiki

AC5.3 ONLY on ABAP Stack

Similar Messages

Maybe you are looking for