Accesed Denied when Checking Query Syntax

Hi,
I was trying to create a condition for a workflow rule using the expression builder but kept getting Accessed Denied (SBL-ODS-50085) when i clicked the "Check Syntax" button. If i just saved my expression it did not complain and seems to work OK?
I was just doing something simple like [<ExpectedRevenue>] > 0. on the opportunity object
Does anyone know why this occurs and is it likely something i am doing or a system issue?
Cheers
Message was edited by:
user597809

I received the Access Denied error message when trying to create a formula for a workflow and here's why:
I took the Oracle recommended approach and copied my admin role to be Admin - CRM and have been using that role to create everything. When I tried to create a workflow formula and clicked check syntax i got Access denied. I copied that formula, signed out and signed in with a user account that has the original out of the box administrator account and it saved fine.
I would appear that the system does not copy an Admin role exactly, check your priviledges for your admin account and tick anything that is unticked.
Hope this helps.

Similar Messages

Query syntax error after multiprovider change

Hi everyone,
I removed key figures from a multicube, changed a query on top afterwards and saved it. The key figures are no longer in the key figure list of the query in the Query designer, and are no longer used in any place within the query.
Now, I'm getting a syntax error on query execution, since the compiled query still contains a reference to the old key figures. Regeneration via RSRT or saving under a new name doesn't work, and to delete the generated report I need a developer key.
Any ideas?
Regards,
Tilman

Hi Shashank,
thanks for your response.
I did try the "check query" button, it didn't return an error. When executing the query via rsrt, I get a dump due to "Syntax error in program GP48VM7K0MSF08DRO2382A2PSTI ". The program still contains data type references to the removed infoobjects. When checking the program via SE38, you get just that syntax error.
I'm looking for a way to clean these things up. Even when creating a new query on the aggregation level (I was talking about a multiprovider earlier, which is located underneath), the error pops up. I activated all the objects along the way, with no effect.
Regards,
Tilman

Cisco ISE 1.2 Checking DACL Syntax

Greetings,
When we first set up all of the DACLs for our ISE deployment, it was explained to us that the "!" was a replacement for the "remark" entry on the access list, but when I utilize the "Check DACL Syntax", ISE tells me that my statements are improper:
Line 13 - In "! permit tcp any any eq 80", argument #1 "!" is not valid. Legal option(s):
permit
deny
remark
no
It doesn't appear that my DACLs are giving any errors when is use, so is this just an aesthetic error or do I need to go through and change all fo my DACLs to reflect this?
Thank You for any input!

Hello David,
I guess there are many more keywords and format that "check DACL syntax" doesn't approve but they do work. A customer wanted to use a keyword ESTABLISHED so I created an ACE and clicked save.
"permit tcp any any established"
It gives me a pop-up stating "syntax check of the DACL content has failed, do you want to submit anyway.
I clicked yes and moved ahead. I then check the dacl syntax and it says
Line 1 - In "permit tcp any any established", argument #5 "established" is not valid.
Finally, I tested this on dot1x configured switch and the output of 'show ip access-list interface <interface-id>' shows it in downloaded access-list. Even though the syntax was not approved by the ISE we still manage to download it to the switch.
In your case if you are using remarks with dot1x and mab, please keep a watch on this defect
CSCuj35704 Remark in DACL causing dot1x and MAB authorization failure
Regards,
Jatin Katyal
**Do rate helpful posts**

EWS API - Impersonating to update a calendar item created by any other user than a service account, raise an error "Access is denied. Check credentials and try again."

Hi,
I am new to using EWS managed APIs.
Following is the issue:
1. I am using a service account e.g. [email protected]. This user is a global administrator and also has ApplicationImpersonation role assigned. (Sign into Online Office 365 account -> Admin -> select "Exchange" tab- > select Permissions
on the left panel -> create an impersonation role -> assign ApplicationImpersonation in Roles: and [email protected] in Members: -> Click on save)
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected].
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
        private static void Impersonate(string organizer)
            string impersonatedUserSMTPAddress = organizer;
            ImpersonatedUserId impersonatedUserId =
                new ImpersonatedUserId(ConnectingIdType.SmtpAddress, impersonatedUserSMTPAddress);
            service.ImpersonatedUserId = impersonatedUserId;
4. It was working fine till yesterday afternoon. Suddenly, it started throwing an exception "Access is denied. Check credentials and try again." Whenever I try to
update that event.
       private static void FindAndUpdate(ExchangeService service)
            CalendarView cv = new CalendarView(DateTime.Now, DateTime.Now.AddDays(30));
            cv.MaxItemsReturned = 25;
            try
                FindItemsResults<Item> masterResults = service.FindItems(WellKnownFolderName.Calendar, cv);
                foreach (Appointment item in masterResults.Items)
                    if (item is Appointment)
                        Appointment masterItem = item as Appointment;
                        if (!masterRecurEventIDs.Contains(masterItem.ICalUid.ToString()))
                            masterItem.Load();
                            if (!masterItem.Subject.Contains(" (Updated content)"))
                                //impersonate organizer to update and save for further use
                                Impersonate(masterItem.Organizer.Address.ToString());
                                // Update the subject and body
                                masterItem.Subject = masterItem.Subject + " (Updated content)";
                                string currentBodyType = masterItem.Body.BodyType.ToString();
                                masterItem.Body = masterItem.Body.Text + "\nUpdated Body Info:
xxxxxxxxxxxx";
                                // This results in an UpdateItem operation call to EWS.
                                masterItem.Update(ConflictResolutionMode.AutoResolve);
                                // Send updated notification to organizer of an appointment
                                CreateAndSendEmail(masterItem.Organizer.Address.ToString(), masterItem.Subject);
                                masterRecurEventIDs.Add(masterItem.ICalUid.ToString());
                            else
                                Console.WriteLine("Event is already updated. No need to update again.:\r\n");
                                Console.WriteLine("Subject: " + masterItem.Subject);
                                Console.WriteLine("Description: " + masterItem.Body.Text);
            catch (Exception ex)
                Console.WriteLine("Error: " + ex.Message);
5. What could be an issue here? Initially I thought may be its a throttling policy which is stopping same user after making certain API call limits for the day, but I am still seeing this issue today.
Any help is appreciated.
Thanks

Your logic doesn't sound correct here eg
2. Create a calendar item by other user for e.g. [email protected], and invite an attendee - [email protected]
3. In a c# program, I connect to EWS service using a service account - [email protected], fetch its calendar events. If organizer of an event is some other user - [email protected] then
I use impersonation in the following way to update the calendar event/item properties- subject, body text etc.
When your connecting to [email protected] mailbox the only user that can make changes to items within
abccalendar is abc (or ABC's delegates). If your impersonating the Organizer of the appointment pqr that wouldn't work unless the organizer had rights to abc's calendar. If you want to make updates to a calendar
appointment like that you should connect to the Organizers mailbox first update the original, send updates and then accept the updates.
When you impersonate your impersonating the security context of the Mailbox your impersonating so its the same a logging on as that user in OWA or Outlook.
Cheers
Glen

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

Oracle Forms returns the first record in the database when performing query

Once in a while when we query for a record on a form, say by first name Tom, then it returns the first record in the database. Other times it return the Tom's record. It only happens once in a while and if you close the form and reopen it and requery for Tom, then it brings Tom's record.
Does anyone know the issue what could be happening. It just happens every now and then that it's hard to reproduce.
ORacle Forms 10GR2
ORacle Application Server 10.1.3
thanks

then it returns the first record in the databaseI'm not sure if i understand you correctly. Do you mean forms ignores the searc-condition you entered? I would check SYSTEM.LAST_QUERY at the moment this happens to check if the condition gets somehow lost.

Database Toolkit Sub query Syntax and file path expectation question.

I need some assistance from those of you smarter than I.
I have two database files (not two tables in the same database file) one represents information delivered from an external interface, and the other is used by the internal interface associated with the processing half of my application. Data is received (i.e. fields are populated) from the external interface to one database file and that data is then copied to another database file where the information will be processed by the internal interface. This is being done because I am worried about file access issues that might occur if two different interfaces (external & internal) try to access the same file at the same time (without dealing with semaphores). I am not too worried about the sanctity of the data since each record supplied from the external interface should not effect any of the data being used by the internal interface. So the first question is , am I being to primitive in my thinking assuming that I would run into file access issues if I were to just use two tables in the same database file for the same purpose ?
My second question is related to my current implementation where I have two separate database files representing the external and internal interface data. Currently when a new set of data is entered into the External Interface Database file, an alert is issued, and another task copies the data from that file into Internal Interface Database, then the data is deleted from the External Interface Database file. My question is related to the syntax that I am using to provide the described functionality. I am currently using a INSERT with a subquery to the External Interface Database file i.e. INSERT INTO InternalDB FROM ExternalDB.ExternalTable WHERE Order = '06306049'; .
My question is when I run this query with both database files in same directory I get an error stating that the ODBC driver can not find the ExternalDB.ExternalTable in the Parent Directory of the subdirectory where the files are actually located. The system DSN is set up correctly for the ExternalDB, and if I move it to the parent directory the query works correctly, my question is why would I have to put the two database files in seperate directories for this to work and is there a way to avoid this ?
Thanks..
Brad W

Thanks for responding Brian -
The message I get is Error Code -2147467259
Conn Execute.vi->InsertIntoFrom.vi<ERR>Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC Microsoft Access Driver] Could not find file 'C:\Project\APDSS\DataBase\ExternalInterface.mdb'. in Conn Execute.vi->InsertIntoFrom.vi
When my query looks like
INSERT INTO InternalInterface SELECT Field1, Field2 FROM ExternalInterface.ExternalTable WHERE Id = '065649-101-750';

Requirement to check the syntax error of Customize SAP Objects in existing landscape.

Hi All,
I have two requirements which are a s follows :
1 ) Check the syntax error of customize SAP Objects in existing landscape except using the Tools which are already given by SAP( Example : Code Inspector , Extended Syntax Check etc.). I have to create a program to fulfill this requirement.
2 ) In case of SAP Upgrade is it possible to know the syntax error in advance that the existing source code will not work in the upgrade version?
Please help me out to solve my issues. Thanks in advance.

Dear Abhishek,
For the code inspector, the syntax check and the extended syntax check, you can define a set of objects to be teste thru SCI:
Go to SCI
In the block 'Object Set', you can create a set. For ths, you have to give it a name, select with the icon left of the textbox if this is a global (for all users) or a local set and click the create Icon.
in the next field, you can define which objects ... are part of the object set.
When using SCII to execute the code inspector, you can specify this set instead of a transport(s) or programming objects.
To run only the syntax check and or the extend syntax check, you can specify a check variant in SCI (third screen block) which contains only those tests or you can in SCII uncheck all tests except those 2.
Regards,
Hans

No Role exist when saving query

Hi all,
After creating a query in query designer when I click to save it, it shows no roles in the Role area. However, I can save it under favorite.
Can someone plz shed some light as to how can I add roles here. Bearing in mind, I have already added some roles in PFCG that appear in SU01 for this user, but these are not available when saving query.
Is there any specific auth object required to save the queries to their respective roles?
Regards.
Mohammad

Hi,
Pls check the below link.
[Re: Steps to add Query to a role (SAP BW);
Hope this helps!!!
Regards,
Jini

Error when transporting query: "... is missing in version M..."

Hi experts
I have some problems due to a transportation of a query and a webtemplate. I hope that some of your guys can help me out.
Please let me know if you need more log information than shown below.
Regards,
Torben
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)                                     |
       Error when activating element 458IE51VAGKXDZ5O2IPZI09W7                                                                             |
      Element 44LODF3U77ZTZAUT2N59KRITZ is missing in version M                                                                           |
      Element 44LODFQVS3SYJ6H5K5CAEXEZB is missing in version M                                                                           |
      Element 44LOGSQ6F3PUW6SPGO7ORV6ZB is missing in version M                                                                           |
      Element 44LOGSXUY2BKETC5MIA11X5P3 is missing in version M                                                                           |
      Error when activating element 458IYKYNVMEMVGH33X0ES79JR                                                                             |
      Element 44LODF3U77ZTZAUT2N59KRITZ is missing in version M                                                                           |
      Element 44LODFQVS3SYJ6H5K5CAEXEZB is missing in version M                                                                           |
      Error when activating element .....

Hi Torben,
When a query/web template is to be transported , one has to select grouping of only necessary objects ( presuming data targets/ info objects are already transported) . And click on transport it will put all required objects in to single request.
Alternatively you can check table RSZELTTXT for findiing out meaning ful name of elements like 44LODF3U77ZTZAUT2N59KRITZ and try to manuaaly include in the transport request and transport the objects.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

I receive "Database access denied" when trying to add component 4543BD

I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0 Student edition.
Solved!
Go to Solution.

Hi Diarra,
I checked my database and the 4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message.
Attached is a schematic with the part, you can open it and build you circuit around it.
Tien P.
National Instruments
Attachments:
4543.ms12 ‏62 KB

Acmcneill1ug 14, 2014 7:16 AM I have IMac OSX 10.9.4, 4GB,Processor 3.06 with Intell2Duo. I would like to check for Malware. I run a TechTool Pro 6 every month and that comes up great. When check how much memory I am using, with only Safar

Acmcneill1ug 14, 2014 7:16 AM
I have IMac OSX 10.9.4, 4GB,Processor 3.06 with Intell2Duo. I would like to check for Malware. I run a TechTool Pro 6 every month and that comes up great.
When check how much memory I am using, with only Safari open I am using 3.9 and more of her 4.0 memory. She is very. very slow in processing. I had 4000
trash to clean out and it took her over an hour to expel. Also for some reason Safari will not allow me to click on a link, in my G-mail, and let it go to the page.
It has a sign saying a pop-up blocker is on and will not let me do it. I must open the stamp to look at my e-mails and if I have redirected link now I can do it.
I have not changed my preferences so where is this pop-up blocker?
I have looked at preferences on Safari and Google, which I do not understand Google, and do not see where this blocker could be.
Malware is something I want to make sure is not on my computer. Tech Tool Pro 6 is all I know of and it does not detect Malware.
Help.
Ceil

Try Thomas Reed's Adware removal tool. He posts extensively in the communities.
Malware Guide - Adware
Malware Discussion

Account field required for some users, not for others in URM when checking

I am running into a real show stopper. I have been working in our development database, and have tested checking in content multiple times with no problems. I recently turned it over to my users to begin testing and they can not even check in one document, because they receive an error stating that the account is required. I know just enough to be dangerous, so I am not quite sure how to solve this one. It makes no sense to me that on my check in screen, account is not required and yet on all of my users check in screens, not only is it required, but nothing they enter is accepted as a valid value, so they can't even get past it. I would just as soon not have account show up or be required, but have struggled with making that happen, since it is not a custom metadata field. It appears to be a delivered field used for security purposes? any help would be appreciated! Thanks.
One more thing that I noticed that may be helpful in diagnosing this is that my profile has no accounts, just #none,#all
whereas the user's profiles have a number of different accounts listed in their profile. Could this be part of the reason that they are forced to enter an account when checking in content and I am not?
If so, how can I get around this?
Edited by: user10985708 on Apr 7, 2009 12:21 PM

That´s a little strange behaviour becouse normally the account field is not required as default.
You could try a global rule setting the Account field not to be required with some IDOC.
But as you say you´re not using accounts anyway i´d suggest removing it from your server instance.
In the server\config\CONFIG.CFG file look for UseAccounts=true set it to false and the field won´t bother you anymore.

High memory use when checking downloads folder through browser

High memory use when checking downloads folder through browser.
I have a total of 3 DDR2 Gbytes of ram. Pentium(R) Dual-Core CPU T4500 @ 2.30GHz Win 7 home pr. 64bit. Firefox 27.0 beta
I right click on a file to "open containing folder" from the drop down menu in downloads.
When the folder has been opened, explorer is trying to index the folder (which it never does completely or well after 5 minutes I close the folder and shut down the dllhost process cause laptop is blazing hot) and memory keeps increasing till no more is available.
I checked task manager and see that dllhost is the particular process that is causing the spike in memory usage even after closing the folder I right click and stop the process and memory is restored after awhile.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Servers where patches will not install automatically or manually, Live updates are broken and when checking installed updates shows "NO UPDATES ARE INSTALLED ON THIS COMPUTER" SFC \SCANNOW will not run

Hello, (Bit of a long one but please read)
We have 3 servers in same physical location and server OU etc that are exhibiting the exact same behaviors (we have server servers in this location that are not), as above theyt are all W2008 R2 SP1 and all built from the same standard
image we use on hundreds of other computers, they have also been in production for different amounts of time and we started to see this behavior at different times with them: (Its odd they are all in the same site where there are also several other servers
that are not effected, there must be a link ? )
These servers are all missing several patches when checking our internal tool that reports from IBM endpoint management that we use to deliver patches (they are not all missing the exact same patches some ore or less than other), although
SCCM (we used SCCM to deliver patches until around 6 months ago) and IBM EM are both running (some ptches hark back to the SCCM Delievry days) they are not patching and when attempting to patch manually by downloading the exact patch coresponding to the fixlet
ID and the KB , the stanbdalone installer starts and after some time you receive an error message “The update is not applicable to yoru computer”. Windows update returns error 80070006 for all of the servers.
it is worth noting that other applications and products also using the .MSU extension will insatll so it is not a problem with the installer service.
The above led me to think a corrupt patch may have stopped the sequence of patching so I then looked in “Programs and Features” => “Installed updates” and this is blank for all of them returening the message:
“NO UPDATES ARE INSTALLED ON THIS COMPUTER”. (this I believe is a part of the fundamental issues and resolving this may resolve the patching)
Another issue is that if you run “SFC /SCANNOW” It starts the scan and then returns: “Windows Resource Protection could not perform the requested operation” (Also in safe mode and both from an elevated CMD and WMI is started as a service)
The all three are probably related so I think fixing the “SFC and NO UPDATES SHOWN” issues will resolve the first.
The things I have tried so far are:
Running : wmic qfe list full /format:htable > c:\updates.htm Should produce a list of updates but instead returns : No Instance(s) Available (this is not hopeful)
Fix: Ran the “SYSTEM UPDATE REDINESS TOOL” from http://support.microsoft.com/kb/947821
Result : Update Ran successfully but NO CHANGE
Fix: Ran the automated and manual fix “RESET WINDOWS UPDATE COMPONENTS” here :
http://support.microsoft.com/kb/971058/en then undated windows update agent.
Result : All ran successfully and NO CHANGE
Fix: Ran MBSA
Result : Runs successfully and then stays at “Done downloading security update information” (Log gives no obvious information)
Fix: Renamed the software distribution folder/restarted services (Various variations of this fix online, tried a few)
Result: Runs as described in article with new Software distribution folder being created,
NO CHANGE
Fix: Create/Correct the reg key for windows trusted installer located here HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version (several articles relating to this and the above issues)
Result: the existing key was correct as should be from internal system information gathered , required in article.
Fix: Ran the “Windows update trouble-shooter”
as here :
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
Result: It detected and fixed error’s but still no change.
The WMI Repository checks out on them all for both of the methods I know to verify “Get-wmiobject –list |measure” and ensure count is over 900 and also “C:\>winmgmt /verifyrepository” and the repository came back as “WMI Repository is consistent”. I guess
this is not hard evidence the WMI is OK, but these are the only methods I know.
I have also tried removing the server from its OU , running a GP Update and then rebooting and testing but to no avail (Bit of a longshot but tried to link the distinction between the three servers and the OU GP is one of them)
I have tried a few other articles registering .Dll’s etc , but I did not take a note of links as I was at the start of this and didn’t expect it to go so long so please reply with anything you see not above im happy to try again.
I have thought about removing SP1 and reinstalling it but this will require a major downtime and only possible if the backup files of SP1 have not been removed.
Any help is apreciated !

Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support

Accesed Denied when Checking Query Syntax

Similar Messages

Maybe you are looking for