Access ABAP Bapi_Flight_Getlist function

Hi,
I am trying to access Bapi_Flight_Getlist function in my web dynpro application. I want to put DropdownList in the deparcher and arrival field as a in put field.
I have done all the settings but the dropdownlist is not showing any fields in that. I have set the property selectedKey of drop down list to the context Destination_from and destination_to .
What might be the problem.?
Regards,
H.V.Swathi

Hi,
i think you following the below example available in sdn
Accessing ABAP Functions in Web Dynpro Java
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00f7103-6790-2a10-ac9c-fcac7c5b18a3
the Destination_From and Destination_To are nodes which have some attributes like city etc.
in Search view
Departure City is bind with city attribute which is under the Destination_From node
Arival City is bind with city attribute which is under the Destination_To node
these attributes accepts input from the end user .
you cann't bind these attributes to DropDownByIndex element because these are returning no values that is the reason you are not getting any values in DropDownByIndex .
Hope it helps you,
Regards,
ramesh

Similar Messages

Error - Creating a Web Dynpro Application Accessing ABAP Functions

Dear All,
we are trying to implement a web dynpro application with accessing ABAP functions.
Previous tasks:
-     insert the ABAP system into the SLD from the NWDI System (Transaction RZ70; the ABAP system is correctly insert into the SLD => technical systems)
-     equipped the JCO connections with the web dynpro content manager (ping and test = OK)
Its the standard tutorial out of the SDN called Creating a Web Dynpro Application Accessing ABAP Functions.
Some hints:
-     There are no errors after the implementation and the rebuild of the project in the NWDS
-     The auto deployment works fine to the development runtime system. The application is shown in the Web Dynpro content manager
-     The In the build log I found these entries:
System.err] [Invoked from com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:585)]
[System.err] java.net.UnknownHostException: FRASAPP562: FRASAPP562
[System.err]      at java.net.InetAddress.getLocalHost(InetAddress.java:1191)
[System.err]      at com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:575)
[System.err]      at com.sap.s2x.tools.GUID.<clinit>(GUID.java:179)
[System.err]      at com.sap.s2x.tools.S2XGUID.getGUID(S2XGUID.java:19)
[System.err]      at com.sap.ide.metamodel.core.i18n.LanguageState.createS2XID(LanguageState.java:191)
[System.err]      at com.sap.ide.metamodel.core.i18n.S2XLanguageUnmarshaller.unmarshal(S2XLanguageUnmarshaller.java:52)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.loadLanguageState(TextPoolProxy.java:703)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.prepareLanguageForRead(TextPoolProxy.java:646)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.isEmpty(TextPoolProxy.java:222)
[System.err]      at com.sap.ide.webdynpro.checklayer.MDOChecker.check(MDOChecker.java:23)
[System.err]      at com.sap.ide.webdynpro.checklayer.view.ViewChecker.check(ViewChecker.java:52)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ViewControllerChecker.check(ViewControllerChecker.java:96)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:119)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:56)
[System.err]      at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:181)
[System.err]      at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:56)
[System.err]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2039)
[System.err]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1296)
[System.err]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
[System.err]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err]      at java.lang.reflect.Method.invoke(Method.java:324)
[System.err]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
[System.err]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[System.err]      at org.apache.tools.ant.Task.perform(Task.java:364)
[System.err]      at org.apache.tools.ant.Target.execute(Target.java:341)
[System.err]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[System.err]      at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
[System.err]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:112)
[System.err]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:61)
[System.err]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:213)
[System.err]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:190)
[System.err]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
[System.err]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err]      at java.lang.reflect.Method.invoke(Method.java:324)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:102)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:76)
[System.err]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
[System.err]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1723)
[System.err]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1495)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
-     Im able to start the application out of the Web Dynpro content manager with run => only the user interface is displayed without any functionality
-     The normal start over the NWDS fails => error text
com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'local/J08_Flugdat_Daventdcflight~xxx.com' and application 'FlightListApp' are not deployed on the server. Please check the used URL for typos.
There two different URLs in use.
Start via NWDS:
http://frasapp562:50000/webdynpro/dispatcher/J08_Flugdat_Daventdcflight~xxx.com/FlightListApp
Start via web dynpro content manager:
http://frasapp562:50000/webdynpro/dispatcher/xxx.com/aventdc~flight/FlightListApp
For test purposes, we started the BAPI (BAPI_Flight_Getlist) on the ABAP system directly. It works.
Any ideas about the system behaviours (different URLs and missing functionality)?
Thanks a lot in advanced!
Best regards
Christoph

The Error has been solved The implementation of a method was missing....
Thx
Christoph

Accessing ABAP Functions in Web Dynpro Java

Hi,
I am trynig to do "Accessing ABAP Functions in Web Dynpro Java" this application, (which is the example application which i got from www.sdn.sap.com) but everything is fine no error also while dyploying.
But it is not dysplaying the first page after i run the application i am getting plain web page ,without any content.
Can any body help me.
Regards,
H.V.Swathi

k.. now iam getting some error on page.
I have embeded the two view in to window.
But now after running the application i am getting connection error
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=jktr3 GROUP=SPACE R3NAME=R32 MSSERV=sapmsR32 PCS=1 ERROR Group SPACE not found TIME Fri Sep 26 15:05:59 2008 RELEASE 700 COMPONENT LG VERSION 5 RC -6 MODULE lgxx.c LINE 4288 DETAIL LgIGroupX COUNTER 1
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)
    at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:989)
    at com.sap.mw.jco.JCO$Client.connect(JCO.java:3193)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:90)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:122)
    ... 61 more
Rgards,
H.V.Swathi

Web Dynpro Application Accessing ABAP Functions

I wrote the example application for Web Dynpro Application Accessing ABAP Functions, as described in the tutorials for NWDS. But when I run, it only show me a blank blue page nothing else, how to fix this issue?
Thanks,
Jawed Ali

Hi Jawed,
Again, I'll insist you to please check if your view is embeded in the Window.
write some output message in the view to ensure that not only gui's, even the messages in the view are not coming.
if there is another issue, Please share with us.
Thank & Regards,
Namrta Mahajan

Creating a Web Dynpro Application Accessing ABAP Functions

Hi all,
I implemented Creating a Web Dynpro Application Accessing ABAP Functions .But recently i heared a new word BW query.Is it not wat i did in the above application or is this a new backend sytem , does it have a new procedure to create model for BW Query in webdynpro rather than what i did in the above app
Regards
Padma N

The Error has been solved The implementation of a method was missing....
Thx
Christoph

Access ABAP table in Webdynpro Java application

Hi All
Is it possible to access ABAP table in Webdynpro Java application
Please provide your input
Thanks
Karthi D.

Hi you will connect to the remote SAP system, the
backend, using an Adaptive RFC MOdel. To access database tables, you can make use of existing functions in terms of RFC function modules. For each function module you need, the system generates a corresponding Java proxy class. All the generated proxy classes and interface are bundled together in the RFC model and treated as part
of your Web Dynpro project
In WebDynpro java you RFC by using Model :
Adaptive RFC Model
1. automatically adapts to changes in function module signature
2 provides support for data types and extensibility
3.support for different structure definitions in different backend
systems (release dependent structures, custom adaptation)
Basic principles and guidelines
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de
See this blog
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2brfc
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/11f1f29526944e8580c5e59333d96d/frameset.htm
Thanks,
Tulasi

WebDynpro Tutorial accessing ABAP for CE 7.1

Hi all:
Just wondering is there any WebDynpro Tutorial that demonstrates accessing ABAP functions from SAP that can be deployed using SAP CE 7.1 environment.
I have already set up the SAP NWDS 7.1, developed simple WebDynpro applications and deployed them using CE 7.1 JEE Engine.
However I am just wondering whether there is any tutorial from SAP that demonstrates accessing ABAP functions from SAP and can be deployed using SAP CE 7.1 environment. I have deployed the tutorial of Flight List( accessing backend ABAP functions) already using SAP NWDS 7.0 and earlier version of SAP Java Engine. However I don't think it's a good idea to import the same project in NWDS 7.1 and deploy it using CE 7.1 Java Engine as the architecture/version is bit different. Or can I just import, repair and delpoy it?
Any suggestion would be beneficial
Thanks a lot!
Anindya

Hi Anindya,
You can migrate a CE 7.0 application and its corresponding WebDynpro components to CE 7.1. Here's a guide that can help you in achieving the same.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40af00ad-8080-2a10-88b5-cc4cec99d8ac
Hope this helps!
Regards,
Romit

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works

Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help

Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad. How can I found out if I will be able to access all the functionality in Alice? Will I need to purchase a local plan of some sort?

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad to use while traveling back and forth from the U.S. to Australia, and within Australia. How can I found out if I will be able to access all the functionality of the iPad in Alice? Will I need to purchase a local plan of some sort? I have never owned an Apple product before -- I'm a newby!

Aside form the limitation of LTE to the 700MHz and 2.1GHz bands (which rules out LTE in Europe I gather, at least as it stands now) the new iPad should let you use a GSM 3g/2g/edge network anywhere. The CDMA Verizon model will only be able to use it's native CDMA radio band in the USA (that radio will be locked to Verizon), but it's international GSM radio is the same as the AT&T model.
Keep in mind though that by far the cheapest option when abroad is to take advantage of free wifi as much as possible (well, that is always the cheapest option, since it is free). I know several people who have taken their wifi-only iPads and iPad2s to Europe and said they did not find the lack of 3G really inconvenient at all as most towns had plenty of free or cheap wifi access all over the place.
And in 3 years, your iPad will be at least 2-3 generations behind, LTE will have already been replaced by 5G or whatever the next new generation of cellular ends up being named (and the "young" kids will be wondering what the heck 3G even means or meant - dang that stuff was from the olden days!), and you can pitch that ancient piece of technology and start things all over again

Inserting records in the ABAP exit function (hashed table XTH_DATA)

Hi all,
I want to add records in the logic of an ABAP exit function. Due table XTH_DATA being a hashed table the normal insert or append is not possible.
My logic MUST move the data to a temporary table (ITAB) where the logic is executed (modifying KYF values and creating new records.
In order to quickly get to a result I have solved the problem in an awful way through hardcoding the structure of ITAB to be the same as XTH_DATA is in this specific case.
I would like to know if someone has an exmaple of a nice way to dynamically create an ITAB with the structure of XTH_DATA?
At the end it should be possible to do: XTH_DATA[] = itab[].
Greetings,
Martin

Hi Martin,
the only way I know is to solve this problem with sort of pointers, field symbols. Roughly spoken the idea is you lookup the structure of xth_data in table dd03l. you define an internal table of type any. you loop around your xth_data table and assign the value of each column of xth_table to your internal table. then you do your your adding. Hopefully then you can simply assign xth_data to your itab.
regards,
Jürgen

Is there a way to access ABAP OO instances from a batch job report

Hello,
I am looking for a way to access ABAP OO instances from a batch job report. My circumstances are the following:
I have got some ABAP OO coding that identifies other objects (class instances) that have to be processed (they have a DoIt method that does some calculation). As this processing is time consuming and performace relevant I have to parallelize this in batch jobs. This batch jobs however can only be "simple" ABAP reports according to SM36. The problem is now that I dont really know how to tell the batch job report what objects to process. Somehow I have to access theses instances from that batch job report.
Does anybody have an idea?
Greetings
Matthias

Hi David,
thanks a lot for your help. After a lot of searching on the net this seems to be the only way to cope with it. However I am not sure about the locking mechanisms and if its suitable for mass data processing. In the help page you suggested the following is stated which I do not fully understand::
"The current lock logic does not enable you to set specific locks for the following requirements:
·        Many parallel read and write accesses
·        Frequent write accesses
·        Division into changeable and non-changeable areas
Although the lock logic makes the first two points technically possible, they are not practical because most accesses would be rejected."
Does this mean
a) if I dont want to set "specific locks" for frequent write accessess I am fine
or
b) I am discouraged from use shared memory technics for frequent write accessess?
In the latter case I will have a problem...
What do you think?
Greets
Matthias

How to access Call Back Functions using *.dll in the Labview?

Hai,
I am Pavan Ram Kumar Somu.
I am new to Labview, currently I am working on MVB Interface.
I need to access the API functions from *.dll file in Labview, as of now , I am doing this with Call function Library node in Labview but it does not support the following data types like
    1. Pointer Arguments(To which memory it points in Labview)
    2. function pointers Arguments
    3 .pointers in structures and pointer structures in structures and many other data types.
Please Answer the below queries also:
1. How to pass pointer arguments to API functions in DLL and how to collect pointer
    return types from API functions in DLL
2. How to pass structure arguments to API functions in DLL and how to collect structure
    return types from API functions in DLL
3. How to use callback functions(nothing but function pointers) in Labview and how to
    collect callback fuctions return types from API functions in DLL
I need your help while passing these datatypes to API functions in DLL from labview.
Suggest me if there is any other alternative for implementing this task.
I am referencing some examples here:
Examples:
I)
Unsigned short int gf_open_device(void *p_device_config, unsigned long int client_life_sign_timeout, unsigned short int *device_error)
void *p_device_config: How to access/pass these arguments in LabView and to which memory location it points in LabView.
II) #include <windows.h>
     #include <process.h>
     HANDLE rcvEvent0, rcvEvent1;
/* Function call*/
CanGetReceiveEvent(handle[0], &rcvEvent0);
Above is a piece of C code, Now I want to use HANDLE datatype which is windows based, how to use these type in the LABVIEW.
With regards
Pavan Ramu Samu

"Somu" <[email protected]> wrote in message news:[email protected]...
Hai,
I am Pavan Ram Kumar Somu.
 
I am new to Labview, currently I am working on MVB Interface.
 
I need to access the API functions from *.dll file in Labview, as of now , I am doing this with Call function Library node in Labview but it does not support the following data types like
    1. Pointer Arguments(To which memory it points in Labview)
    2. function pointers Arguments
    3 .pointers in structures and pointer structures in structures and many other data types.
 
Please Answer the below queries also:
 
1. How to pass pointer arguments to API functions in DLL and how to collect pointer  
    return types from API functions in DLL
 
2. How to pass structure arguments to API functions in DLL and how to collect structure
    return types from API functions in DLL
 
3. How to use callback functions(nothing but function pointers) in Labview and how to
    collect callback fuctions return types from API functions in DLL
 
I need your help while passing these datatypes to API functions in DLL from labview.
 
Suggest me if there is any other alternative for implementing this task.
 
 
I am referencing some examples here:
Examples:
I)
Unsigned short int gf_open_device(void *p_device_config, unsigned long int client_life_sign_timeout, unsigned short int *device_error)
 
void *p_device_config: How to access/pass these arguments in LabView and to which memory location it points in LabView.
 
II) #include <windows.h>
     #include <process.h>
   
     HANDLE rcvEvent0, rcvEvent1;
 
/* Function call*/
CanGetReceiveEvent(handle[0], &rcvEvent0);
 
Above is a piece of C code, Now I want to use HANDLE datatype which is windows based, how to use these type in the LABVIEW.
 
With regardsPavan Ramu Samu
Search the forum (forums.ni.com) for callback, pointer or handle, and you'll find that it is all possible, but not very easy.
e.g.: http://forums.ni.com/ni/board/message?board.id=170&message.id=88974&requireLogin=False
Regards,
Wiebe.

Error Accessing an Oracle Function

Hi There,
I am trying to access an oracle function and getting an
error.
CREATE OR REPLACE FUNCTION simple RETURN VARCHAR2 IS
BEGIN
RETURN 'Simple Function';
END simple;
<cfstoredproc procedure="simple" datasource="MySource"
returnCode ="no">
<CFPROCRESULT name="simple_function">
</cfstoredproc>
Error:
Error Executing Database Query. [Macromedia][SequeLink JDBC
Driver][ODBC Socket][Oracle][ODBC]Syntax error or access violation.
I do have access to this function. I tried it from SQL Plus
and it works fine.
any help in this will be highly appreciated.
Regards,

As per Adam Cameron advice, I changed my SQL function:
CREATE OR REPLACE FUNCTION simple RETURN VARCHAR2 IS
a varchar2(10) := '';
BEGIN
select 'Simple' into a from dual;
Return a;
END simple;
As per paross1 advice, I changed my code to:
<cfstoredproc procedure="simple" datasource="MySource"
returnCode ="yes">
<CFPROCRESULT name="simple_function">
</cfstoredproc>
I am still getting the following error:
Error Executing Database Query. [Macromedia][SequeLink JDBC
Driver][ODBC Socket][Oracle][ODBC]Syntax error or access violation.
The error occurred on line 53.
Any advice will be highly appreciated.

Read access to procedures,function,packages and triggers

Hi,
I created a user with CREATE SESSION,SELECT ANY TABLE privilege. My objective is to create a user with read only access to other schemas. But the newly created user is not able to read procedures,function,packages and triggers. The new user need read access to procedures,function,packages and triggers. What is the priviege required for this access? Please help me to resolve this issue.
Regards,
Mat.

Hi,
Grant select all will give select privileges to all schema level objects except procedures,function,packages and triggers. But I need to grant read privileges on these objects to newly created user.
Regards,
Mat.

Access ABAP Bapi_Flight_Getlist function

Similar Messages

Maybe you are looking for