Access form the Application Server
Hi,
I have a Invoice in the directory abc/test on the application sever but when the third party is trying to access the same thru FTP it says that Ur not authorised even though he is able to see the file.
Could any body tell me what might be the reason and how to resolve the same
with rgds
Ranjith Singh
Hi,
I think you can see a file in application server, but you need some authorizations to read or modify it, which can be restricted to some users in the system. So check if there are required authorizations given to third party user ID.
Thanks,
Venkatesh.
Edited by: venkatesh333 on Jul 28, 2011 6:14 AM
Similar Messages
-
BW web access when the application server doesn't have a public ip
Hi everybody
I need to access bw queries via web from outside de organizational network.
I'm already checked the access from within the network and works fine, the question is:
what do I have to do to setup a machine with a public IP to forward the request to BW??
I understand that there is a sap message server which can redirect request to one or more applications servers. It's possible to run this server on my visible box, so that I can redirect requests??
I really apreciate any help
thanks
sincerely
A. GarduñHi,
one way is to use the sap-web-dispatcher.
its a peace of software. you've to download, install and configure it on a server with a public IP.
The web dispatcher will point to your BW.
Kind Regards,
Alican -
Error while accessing the application server file
Hello,
When I try to load the data from CSV file to PSA , I am getting following error message
"Error while accessing the application server file"
"Errors in source system"
I gave the right file path
I am not sure about this error message.
Thanks,Hi ram,
if you have more than one application server running in your BI system (see at transaction SM51) be aware that your infopackage will be executed on the right one. Each application server has its own file system and your job need to run on the server your file is stored on.
Also check if the os user of the SAP system itself (<sid>adm on Unix) has rights to read that file.
Bye
Frank -
Deploying forms to the Application Server
We are about to use SCM to store our forms and reports.
We also run application server AS10g.
My question is:
Is it possible to deploy forms through scm to the application server with out using the file system?i've done this with :
f90genm.sh module=myform.fmb userid=username/passwd@tns_connect_string;
if you know some unix commands you can make a script to compile all fmb's modified in the last DAY/HOUR/MINUTE!!!! i can say that im not a bash expert :)))
you may take attention that working with Forms IDE under windows will make that specific language CHARS like portuguese G or C or I, or spanish Q, and russian chars for instance... will be showed has ? after compiled in Linux/Unix plataform! For instance BRAGANGA would be wrote as BRAGAN?A!
Joao Oliveira -
Regarding reading data from a file in the application server.
Hello Everyone,
My question is:
The file in the application server consists of data with header, detail and trail out of which the detail contains the main information. The detail again contains the data in the form of a continuous string and again some spaces corresponding to a single record. I need to split the data in the internal table in such a way so that the first few characters get into field-1 of the target internal table. Again I need to consider the spaces for accessing the data for filling up in field-2. How do I decide on the 'Split' statement and specially when the whole string has to be taken care of as contatining data in a single string format without space and again some data after some spaces corresponding to a single record.
Your help is very much needed. Thanks to all the experts in advance.Hi
This is the sample code I was used for the similar requirement.
DATA: single_line TYPE string .
v_file_listings = pa_filn1.
IF v_file_listings IS INITIAL .
MESSAGE e039 WITH v_file_listings.
ENDIF.
*-- read file, split lines into fields and put data into table
OPEN DATASET v_file_listings FOR INPUT IN TEXT MODE ENCODING NON-UNICODE. "Opening the files
IF sy-subrc EQ 0.
DO.
READ DATASET v_file_listings INTO single_line. "Reading the content of file into line
IF sy-subrc = 0.
IF sy-index > 1. "skip header-line
SPLIT "Split the content of line into work area
single_line
AT k_split
INTO
wa_listings-kschl " Condition type
wa_listings-tabname16 " Condition table name
wa_listings-vkorg " Sales organisation
wa_listings-kunnr " sold-to party numberor ship-to party number
wa_listings-matnr " Material Number
wa_listings-kodatab " Valid-from date
wa_listings-kodatb1. " Valid-to date
APPEND wa_listings TO itab_listings. "Appending Work Area to internal table
ENDIF.
ELSE.
EXIT.
ENDIF.
v_count1 = sy-tabix.
ENDDO.
Regards,
Sreeram -
Retrieving PDF form from Application server
hi all,
i am saving a pdf form in application server and when the user wants the same file then i want to retrive that file from application and show the user and it should not be saved to presentation server only he should see it.
iam able to save it to presentation layer using gui_download but my requirement is not to save it show only display the form.
Thanks in advance,
Sree
helpful answers will be surely rewarded pointsHi,
1st solution - use DOI (desktop office integration). This way you can open Adobe, Microsoft, and others application documents directly in the SAP windows. See SAP document how to do it. It's not a little work, but it should fulfill your requirements.
2nd solution - share the folder with the PDF documents and then with shell command (start
server\folder\xxxxxx.pdf) at the front end access it and start the associated application at the frontend. I don't recommend this one, sharing folders at the appl.server is a security threat...
You know about the points and useful answers... -
How to see the file at the application server
HI TO ALL SDNERS ,
THIS IS MY CODE WHERE TO CHECK THE DOWNLOADED FILE AT THE APPLICATION SERVER.IN TCODE AL11 I HAVE SEEN THERE IS NO FILE GETTING CREATED.WHEN TRANSFERRING THE SY-SUBRC VALUE IS ZERO.
Program Name : ZME11_BDC.
Title : PURCHASE INFORMATION RECORD LOAD PROGRAM
Program Objective : THIS PROGRAM READS IN THE PURCHASE
INFORMATION FILE. IT CREATES A BDC SESSION TO
USE TO LOAD THE PURCHASE INFORMATION RECORDS
INTO SAP using the ME11 Transaction.
REPORT ZME11_BDC no standard page heading MESSAGE-ID ZHNC line-size 55.
constants declaration
constants: c_x value 'X',
c_sess type apqi-groupid value 'zcustomer',
c_xd01 type tstc-tcode value 'ME11'.
DECLARING VARIABLES
DATA: V_MSG(255),
V_ERREC TYPE I,"NO OF FAILED RECORDS
V_LINES."NO OF RECORDS
FLAG DECLARATIONS
DATA: FG_DATA_EXIST VALUE 'X',"CHECK FOR DATA
FG_SESSION_OPEN VALUE ''.
STRUCTURES AND INTERNAL TABLE DECLARATIONS
TYPES :BEGIN OF TY_PIR,
LIFNR TYPE EINA-LIFNR,
MATNR TYPE EINA-MATNR,
EKORG TYPE EINE-EKORG,
WERKS TYPE EINE-WERKS,
VERKF TYPE EINA-VERKF,"sales person
TELF1 TYPE EINA-TELF1,"telephone
URZLA TYPE EINA-URZLA,"country
REGIO TYPE EINA-REGIO,"region
APLFZ(5),"plan deleivery time
EKGRP TYPE EINE-EKGRP,"purchase group
NORBM(13),
NETPR(13),
END OF TY_PIR.
DATA : IT_PIR TYPE TABLE OF TY_PIR,
WA_PIR LIKE LINE OF IT_PIR.
DATA: BEGIN OF IT_BDCDATA.
INCLUDE STRUCTURE BDCDATA.
DATA END OF IT_BDCDATA.
DATA : BEGIN OF IT_BDCMSG.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA END OF IT_BDCMSG.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : FNAME TYPE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION ON VALUE REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = FNAME.
START OF SELECTION
START-OF-SELECTION.
PERFORM F_GET_DATA USING FNAME
CHANGING IT_PIR.
PERFORM F_GENERATE_DATASET USING FNAME
CHANGING IT_PIR WA_PIR.
*& Form F_GET_DATA
text
-->P_V_FNAME text
<--P_IT_PIR text
FORM F_GET_DATA USING P_FNAME LIKE FNAME
CHANGING P_IT_PIR LIKE IT_PIR.
DATA: LV_FILE TYPE STRING.
LV_FILE = FNAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
FILETYPE = 'DAT'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = P_IT_PIR
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF P_IT_PIR IS INITIAL.
FG_DATA_EXIST = ''.
ENDIF.
ENDFORM. " F_GET_DATA
*& Form F_GENERATE_DATASET
text
-->P_V_FNAME text
<--P_IT_PIR text
FORM F_GENERATE_DATASET USING P_V_FNAME LIKE FNAME
CHANGING P_IT_PIR LIKE IT_PIR
P_WA_PIR LIKE WA_PIR.
MESSAGE I001(ZHNC).
*OPENING FILE AT THE APPLICATION SERVER FOR WRITING
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC EQ 0.
MESSAGE I002(ZHNC).
LOOP AT P_IT_PIR INTO P_WA_PIR.
SPLIT P_WA_PIR AT '*' INTO P_WA_PIR-LIFNR
P_WA_PIR-MATNR
P_WA_PIR-EKORG
P_WA_PIR-WERKS
P_WA_PIR-VERKF
P_WA_PIR-TELF1
P_WA_PIR-URZLA
P_WA_PIR-REGIO
P_WA_PIR-APLFZ
P_WA_PIR-EKGRP
P_WA_PIR-NORBM.
*TRANSFER THE FILE FROM INTERNAL TABLE TO APPLICATION SERVER
MESSAGE I003(ZHNC).
TRANSFER P_WA_PIR TO FNAME.
ENDLOOP.
*CLOSING THE FILE AT THE APPLICATION SERVER
CLOSE DATASET FNAME.
ENDIF.Hello,
I made a similar program. You can have a look at it.
*& Form write_to_app_server
text
--> p1 text
<-- p2 text
FORM write_to_app_server.
To get filename
PERFORM get_filename.
To write into the application server
OPEN DATASET g_filename_with_path FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT <l_table> INTO <l_line>.
TRANSFER <l_line> TO g_filename_with_path.
ENDLOOP.
CLOSE DATASET g_filename_with_path.
ELSE.
CLOSE DATASET g_filename_with_path.
ENDIF.
To send mail
PERFORM send_mail.
ENDFORM. " write_to_app_server
*& Form get_filename
text
--> p1 text
<-- p2 text
FORM get_filename.
DATA : l_log_path TYPE filepath-pathintern
VALUE 'Y28M_DOWNLOADS_BACKGROUND' .
CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
EXPORTING
client = sy-mandt
logical_path = l_log_path
operating_system = sy-opsys
file_name = p_fname
IMPORTING
file_name_with_path = g_filename_with_path
EXCEPTIONS
path_not_found = 1
missing_parameter = 2
operating_system_not_found = 3
file_system_not_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " get_filename
You may find it useful.
Regards,
Karuna. -
How to delete the record in the file present in the application server?
Hi,
I have two questions.
i) How can I delete a record based on some condition in the recordx in the file that is present in the application server?
ii) How can I lock the users whiel one user is accessing the file on the application server?
Thanks in advance.
SuvanHi,
If u want a frequent deletion this approach to delete a record from a file will havee unnecesary copy of records from one file to another and deletion of one file and renaming activities.
Instead what u can do is Add and field del_flag to ur record structure.
If u want to delete the record from a file just mark this del_flag as 'X'.
While processing u can have a loop like
loop at it_XXX where del_flag <> 'X'.
endloop.
This will logically delete the record.
When u r to finish the application at that time only perform this copying / deleting / and renaing activity
Hope this helps.
Cheers,
Nitin -
Error while integrating the application server in jdeveloper?
i am using standalone server connection and given the settings ....
test process is good..all the test connections are successful...
but while navigating to SOA folder. i couldn't find deployed files in soa folder.
i found following error
javax.naming.NamingException: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://xxxxxxxxxxxxxxxxxxxxxDestination unreachable; nested exception is:
java.net.ConnectException: Connection timed out: connect; No available router to destination] [Root exception is java.lang.RuntimeException: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://xxxxxxxxxxxxx: Destination unreachable; nested exception is:
java.net.ConnectException: Connection timed out: connect; No available router to destination]]
at oracle.tip.tools.ide.fabric.asbrowser.SOAServerProvider.listBindingsImpl(SOAServerProvider.java:35)
at oracle.rc.asadapter.context.spi.AbstractContextProvider.listBindings(AbstractContextProvider.java:133)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport$3.method(DefaultMutableAppServerContext.java:384)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport$MethodCall.invoke(DefaultMutableAppServerContext.java:421)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport.listBindings(DefaultMutableAppServerContext.java:381)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext$ContextProviderSupport.access$500(DefaultMutableAppServerContext.java:314)
at oracle.rc.asadapter.context.spi.DefaultMutableAppServerContext.localListBindings(DefaultMutableAppServerContext.java:207)
at oracle.rc.asadapter.context.spi.AbstractEventDirContext.listBindings(AbstractEventDirContext.java:185)
at oracle.adf.rc.spi.jndi.AbstractDirContext.listBindings(AbstractDirContext.java:214)
at oracle.rc.asadapter.context.spi.DefaultAppServerManageableContext.getManageables(DefaultAppServerManageableContext.java:58)
at oracle.jdeveloper.asnav.nodes.DefaultManageableFolder.loadChildren(DefaultManageableFolder.java:327)
at oracle.jdeveloper.asnav.nodes.DefaultManageableFolder$4.run(DefaultManageableFolder.java:288)
Caused by: java.lang.RuntimeException: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://xxxxxxxxxxxxx: Destination unreachable; nested exception is:
java.net.ConnectException: Connection timed out: connect; No available router to destination]
at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.initPartitions(WeblogicSOAServer.java:89)
at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.<init>(WeblogicSOAServer.java:68)
at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listWeblogicSOAServers(ASBrowserHelper.java:275)
at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listSOAServers(ASBrowserHelper.java:201)
at oracle.tip.tools.ide.fabric.asbrowser.SOAServerProvider.listUserObjects(SOAServerProvider.java:54)
at oracle.tip.tools.ide.fabric.asbrowser.SOAServerProvider.listBindingsImpl(SOAServerProvider.java:21)
... 11 more
Caused by: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://xxxxxxxxx:7021: Destination unreachable; nested exception is:
java.net.ConnectException: Connection timed out: connect; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:368)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at oracle.soa.management.internal.facade.ServerManagerImpl.<init>(ServerManagerImpl.java:76)
at oracle.soa.management.internal.facade.ServerManagerFactoryImpl.createServerManager(ServerManagerFactoryImpl.java:28)
at oracle.tip.tools.ide.fabric.asbrowser.WeblogicSOAServer.initPartitions(WeblogicSOAServer.java:85)
... 16 more
Caused by: java.net.ConnectException: t3://xxxxxxxx:7021: Destination unreachable; nested exception is:
java.net.ConnectException: Connection timed out: connect; No available router to destination
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:353)
... 26 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.ConnectException: Connection timed out: connect; No available router to destination
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:254)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
... 29 more
i worked out with the statements in help file which is as follows
11.6.1 No available router to destination Message is Displayed When Attempting to Connect to the Administration Server from WLST
When trying to connect to the WebLogic Server Administration Server from WLST using localhost as the host name, the following message may be displayed if the listen-address attribute of the Administration Server has been restricted to certain IP addresses:
javax.naming.CommunicationException [Root exception is
java.net.ConnectException : <t3://HOST:PORT> : Destination unreachable;
nested exception is: java.net.ConnectException: Connection refused; No
available router to destination
Workaround
Use either of the following workarounds:
Check that the listen-address attribute of the Administration Server has been set correctly in the domain configuration file. You can either remove the listen-address line or simply comment it out. Oracle recommends that you comment it out in case you need to know the value at a later time. For example, in the domain configuration file:
<server>
<name>AdminServer</name>
<ssl>
</ssl>
<machine>machine_name</machine>
<!-- listen-address>machine_ip_address</listen-address -->
</server>
Use the host name of the Administration Server, instead of localhost, in the WLST connect command.
i removed listen address in config file..but i am still facing with same error
Edited by: 947453 on Jul 25, 2012 7:09 PMHello,
Were you able to resolve this? I am facing the same issue where my JDev is on a separate machine from the SOA server. Where is the "domain configuration file" located? I am running 11.1.1.6. Within JDev all the other options for the Application Server (Deployments, Servers, Web Services) return results quickly. SOA is throwing the error you mention.
Thank you. -
How to find out the application server instance name?
Hi,
I installed an Oracle application server a long long while ago and completely forgot the things about the installation, including the name of the instance (I installed single instance, not cluster). Now I am trying to create a connection to the application server and I am prompted to fill in the instance name. Where in the installation can I find out the instance name?
The version of the server as displayed when the server is started:
$ ./oc4j -start
Starting OC4J from /oraInventory/j2ee/home ...
09/10/08 16:04:39 Oracle Containers for J2EE 10g (10.1.3.2.0) initializedThis 10.1.3.2.0 number is somewhat confusing. As I understand it, right now if you download a copy of the Application server from Oracle web site, the current version is 10.1.3.1.0.
I am also reading the installation guide now and when looking at the server starting messages on the screen, I realize that installing the server in the oraInventory directory is not quite right. Does that interfere with the correct functioning of the server? I installed it but have never tried to use it until now.
Many thanks for your help!
NewmanJ. Newman wrote:
Hi,
I installed an Oracle application server a long long while ago and completely forgot the things about the installation, including the name of the instance (I installed single instance, not cluster). Now I am trying to create a connection to the application server and I am prompted to fill in the instance name. Where in the installation can I find out the instance name?If you have access to that server, then the following should give the instance name.
grep 'IASname' $ORACLE_HOME/config/ias.properties
you should also see it in the AS Control Console page.
The version of the server as displayed when the server is started:
$ ./oc4j -start
Starting OC4J from /oraInventory/j2ee/home ...
09/10/08 16:04:39 Oracle Containers for J2EE 10g (10.1.3.2.0) initializedThis 10.1.3.2.0 number is somewhat confusing. As I understand it, right now if you download a copy of the Application server from Oracle web site, the current version is 10.1.3.1.0.
Regarding the version numbers, this fourth digit refers to the Component-specific release number. The OAS documentation says this about it.
"This digit identifies a release level specific to a component. Different components can have different numbers in this position depending upon, for example, component patch sets or interim releases."
I am also reading the installation guide now and when looking at the server starting messages on the screen, I realize that installing the server in the oraInventory directory is not quite right. Does that interfere with the correct functioning of the server? I installed it but have never tried to use it until now.
Many thanks for your help!
NewmanI think Oracle software should always be installed in a separate directory. I think it may also generate errors in its functioning but it will certainly create a whole lot confusion and mess in later administration and configurations.
hope that helps!
AMN
Edited by: AMN on Oct 8, 2009 5:14 PM -
Secure the password of the schema in the application server
Hi,
my application is using one schema, and the users are stored in a table within that schema. When the user run the application, the schema password is not required since it is stored in formsweb.cfg file as userid=username/password@servicename. the problem with this, is that anyone is able to know the schema password by opening the formsweb.cfg.
is there any way to make the password invisible in the application server ?
ThanxHi
1. What is the version of the Oracle Fusion Middleware you are using?
2. Why would the users have access to the formsweb.cfg file?
Please provide the above info to get further assistance.
Regards,
Durbanite -
Need to replace a file in the application server
Hello Experts,
Through ABAP coding, I need to replace a file which is available in the application server from one path to another. I should not use OPEN DATASET, CLOSE DATASET, DELETE DATASET and all as they deal with the data. I need to replace the file with out touching the data of the file.
Could anyone please help.
I heard that i have to use some UNIX script.
Regards,
SudheerSudheer,
Try this...
WITHOUT TOUCHING THE DATA OF A FILE . . .Just Moving the file ( unix commands in abap )
DATA: command(255) TYPE c,
fnam_sour(255),
fnam_target(255).
fnam_sour = '\hme\usr\interface\..... " path of source file
fnam_target = '\hme\usr\interface\..... " target path, where file to placed.
OPEN DATASET fnam_sour FOR INPUT " fnam_sour -> path of source file...
MESSAGE msg IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc <> 0.
< error msg : no file exits>
else.
OPEN DATASET fnam_target FOR INPUT " fnam_target -> path where file to be placed....
MESSAGE msg IN TEXT MODE
ENCODING DEFAULT.
if sy-surc = 0.
CONCATENATE 'mv' fnam_sour fnam_target INTO command SEPARATED BY
space.
CONDENSE command.
PERFORM uxcmd USING command.
endif.
endif.
*& Form UXCMD
FORM uxcmd USING p_command.
**issue UNIX command by calling system function.
DATA: BEGIN OF itab OCCURS 0,
line(255),
END OF itab.
CALL 'SYSTEM' ID 'COMMAND' FIELD p_command
ID 'TAB' FIELD itab-sys.
ENDFORM. " UXCMD
Regards
Ram -
Saving XXL file in the application server
Hi everyone,
I'm using FM XXL_FULL_API to easily (without much knowledge of it's own capabilities) generate an excel file from this tree list i have built.
The thing is, now i'm being asked to store the file in some folder of theirs, in the Unix system, where the application server is located.
Any thoughts?
Thank you in advance.
DuarteHi,
At AL11, if you have the proper authorizations, you should see a Configure button. After that, enter:
- Directory Name:
server-name\directory
- Param. Name: Z_<directory>
- ServerName: all
Then, click on Save.
Take into account that SAPServiceSID user should have read access to the share.
Regards,
Maximiliano -
ABAP Code for Backup the entire table data in the application server
Hello Friends,
I have to create the table data Backup and Store the entire table data in the application server and also be able to restore the data back if needed.
this should be dynamic program for any table based on the table name given on the application server.. I have developed a program for this but its having problems with the Quantity, amount. Its not writing it correctly at the application level.
ANy Suggestions on this.
Below is the program for this.
Thanks,
Ster.
* Report YWMM_TABLE_DUMP *
REPORT ywmm_table_dump .
TABLES :
dd03l.
* Type spool declaration
TYPE-POOLS:
abap, slis.
DATA: i_table_data1 TYPE REF TO data.
DATA : it_dd03l LIKE dd03l OCCURS 0 WITH HEADER LINE.
*DATA : gt_fieldcat TYPE lvc_s_fcat.
DATA : i_fcat TYPE STANDARD TABLE OF lvc_s_fcat,
l_dr_line TYPE REF TO data,
l_v_as4vers TYPE as4vers.
FIELD-SYMBOLS: <f_table_data1> TYPE STANDARD TABLE,
<f_wa_table_data1> TYPE ANY.
SELECTION-SCREEN: BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
PARAMETERS: rb_copy RADIOBUTTON GROUP map DEFAULT 'X',
rb_rest RADIOBUTTON GROUP map.
SELECTION-SCREEN: END OF BLOCK bl1.
SELECTION-SCREEN: BEGIN OF BLOCK bl2 WITH FRAME TITLE text-002.
PARAMETERS: p_table TYPE tabname OBLIGATORY,
p_plfld TYPE dd03l-fieldname.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_bkfile TYPE localfile OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK bl2.
PERFORM get_data.
IF rb_copy = 'X'.
PERFORM backup.
ELSEIF rb_rest = 'X'.
PERFORM database_update.
ENDIF.
*& Form get_data
FORM get_data.
CLEAR i_fcat.
REFRESH i_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = p_table " Table Name
CHANGING
ct_fieldcat = i_fcat
EXCEPTIONS
OTHERS = 1.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_fcat
IMPORTING
ep_table = i_table_data1.
IF sy-subrc = 0.
ASSIGN i_table_data1->* TO <f_table_data1>.
ELSE.
WRITE: 'Error creating internal table'.
ENDIF.
IF rb_copy = 'X'.
SELECT * FROM (p_table) INTO CORRESPONDING FIELDS OF
TABLE <f_table_data1> UP TO 20 ROWS.
ELSEIF rb_rest = 'X'.
CREATE DATA l_dr_line LIKE LINE OF <f_table_data1>.
ASSIGN l_dr_line->* TO <f_wa_table_data1>.
*Get Data from Application Server
* Opening the dataset P_BKFILE given in the selection screen
TRANSLATE p_bkfile TO LOWER CASE.
OPEN DATASET p_bkfile FOR INPUT IN TEXT MODE." ENCODING DEFAULT.
IF sy-subrc NE 0.
* MESSAGE:
ELSE.
DO.
* Reading the file from application server
READ DATASET p_bkfile INTO <f_wa_table_data1>.
IF sy-subrc = 0.
APPEND <f_wa_table_data1> TO <f_table_data1>.
ELSE.
EXIT.
ENDIF.
ENDDO.
* Closing the dataset
CLOSE DATASET p_bkfile.
ENDIF.
ENDIF.
ENDFORM. " get_data
*& Form backup
* text
* --> p1 text
* <-- p2 text
FORM backup.
TRANSLATE p_bkfile TO LOWER CASE.
OPEN DATASET p_bkfile FOR OUTPUT IN TEXT MODE.
IF sy-subrc NE 0.
WRITE: text-017.
STOP.
ELSE.
LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
TRANSFER <f_wa_table_data1> TO p_bkfile.
ENDLOOP.
ENDIF.
CLOSE DATASET p_bkfile.
ENDFORM. " backup
*& Form database_update
FORM database_update.
DATA : i_mara_u TYPE STANDARD TABLE OF mara WITH HEADER LINE,
i_ekpo_u TYPE STANDARD TABLE OF ekpo WITH HEADER LINE,
i_eban_u TYPE STANDARD TABLE OF eban WITH HEADER LINE,
i_resb_u TYPE STANDARD TABLE OF resb WITH HEADER LINE,
i_plpo_u TYPE STANDARD TABLE OF plpo WITH HEADER LINE,
i_stpo_u TYPE STANDARD TABLE OF stpo WITH HEADER LINE,
i_vbap_u TYPE STANDARD TABLE OF vbap WITH HEADER LINE,
i_vbrp_u TYPE STANDARD TABLE OF vbrp WITH HEADER LINE,
i_lips_u TYPE STANDARD TABLE OF lips WITH HEADER LINE,
i_afvc_u TYPE STANDARD TABLE OF afvc WITH HEADER LINE,
i_asmd_u TYPE STANDARD TABLE OF asmd WITH HEADER LINE,
* i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
i_qmel_u TYPE STANDARD TABLE OF qmel WITH HEADER LINE,
i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
i_esll_u TYPE STANDARD TABLE OF esll WITH HEADER LINE,
i_t165_u TYPE STANDARD TABLE OF t165 WITH HEADER LINE,
i_t165e_u TYPE STANDARD TABLE OF t165e WITH HEADER LINE,
i_twpko_u TYPE STANDARD TABLE OF twpko WITH HEADER LINE,
i_tpext_u TYPE STANDARD TABLE OF tpext WITH HEADER LINE,
i_ce4mxpa_u TYPE STANDARD TABLE OF ce4mxpa WITH HEADER LINE,
i_ce4mxpa_acct_u TYPE STANDARD TABLE OF ce4mxpa_acct WITH
HEADER LINE,
i_zaim_u TYPE STANDARD TABLE OF zaim WITH HEADER LINE,
i_s012_d TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
i_s012_i TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
i_dummy TYPE STANDARD TABLE OF mara.
CASE p_table.
WHEN 'MARA'.
* Non-Key
PERFORM move_to_table USING <f_table_data1>
CHANGING i_mara_u[]
i_mara_u.
PERFORM update_table USING i_mara_u[].
ENDCASE.
ENDFORM. " database_update
*& Form move_to_mara
FORM move_to_table USING p_tab_from TYPE STANDARD TABLE
CHANGING p_tab_to TYPE STANDARD TABLE
p_w_table.
DATA: l_wa_fcat TYPE lvc_s_fcat.
FIELD-SYMBOLS: <f_field_from> TYPE ANY,
<f_field_to> TYPE ANY.
LOOP AT p_tab_from ASSIGNING <f_wa_table_data1>.
LOOP AT i_fcat INTO l_wa_fcat.
ASSIGN COMPONENT l_wa_fcat-fieldname
OF STRUCTURE <f_wa_table_data1> TO <f_field_from>.
ASSIGN COMPONENT l_wa_fcat-fieldname
OF STRUCTURE p_w_table TO <f_field_to>.
<f_field_to> = <f_field_from>.
ENDLOOP.
APPEND p_w_table TO p_tab_to.
ENDLOOP.
ENDFORM. " move_to_mara
*& Form update_table
FORM update_table USING p_table_update TYPE STANDARD TABLE.
SELECT SINGLE *
FROM dd03l
WHERE fieldname = p_plfld
AND tabname = p_table
AND keyflag <> 'X'
AND as4local = 'A'
AND as4vers = l_v_as4vers
AND ( comptype = 'E' OR comptype = space ).
IF sy-subrc = 0.
* Do update
IF NOT p_table_update IS INITIAL.
UPDATE (p_table) FROM TABLE p_table_update.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
ROLLBACK WORK.
WRITE: text-003.
STOP.
ENDIF.
ENDIF.
ELSE.
*delete and insert.
IF NOT p_table_update IS INITIAL.
* DELETE (p_table).
IF sy-subrc = 0.
INSERT (p_table) FROM TABLE p_table_update.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
ROLLBACK WORK.
WRITE: text-018.
STOP.
ENDIF.
ELSE.
ROLLBACK WORK.
WRITE: text-018.
STOP.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " update_table
Edited by: Julius Bussche on Jul 18, 2008 1:43 PM
Please use a meaningfull subject title!ARS,
I am struggling a bit to get this.
there is a syntax error,
Field "FIELDS_INT-TYPE" is unknown. It is neither in one of thespecified tables nor defined by a "DATA" statement.
Again you have asked to move to a diffrent table. What is that table and how to build it.
LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
LOOP AT i_fcat INTO l_fcat.
IF l_fcat-inttype EQ 'P'.
ASSIGN COMPONENT l_fcat-fieldname
OF STRUCTURE <f_wa_table_data1> TO <f_field>
TYPE fields_int-type
DECIMALS fields_int-decimals.
ELSE.
ASSIGN COMPONENT l_fcat-fieldname
OF STRUCTURE <f_wa_table_data1> TO <f_field>
TYPE fields_int-type.
ENDIF.
" Move <f_field> to a new table and use this table for download
ENDLOOP.
TRANSFER <f_wa_table_data1> TO p_bkfile.
ENDLOOP.
Ster -
Output in the application server
hi friends ,
i am displaying a graph in my out put .same time i want to place the graph in application server .
and i want to display this in a smart form.how can i place this out put in the application server.hi
this can be done by writing the file to Application server through SE38 program.you can use CG3Y and CG3Z transaction.use AL11 to view file
hope this helps
regards
Aakash Banga
Maybe you are looking for
-
How can I make only the shape active for the mouse events, not the whole box around it?
I want to create mouse over events for different parts of an image (say of a hard disk drive), so when the user places their mouse over the spindle, say, it will change colour. At the moment I have it working however the event is triggered when ever
-
Acrobat pro features for Ipad?
Is there an Ipad app with the same features as Acrobat pro? I want to be able to create a pdf document out of several photos, and to crop each page (photo).
-
Contract validity start date should be better left blank
Hello, We have customized the contract start and end date as optional (because some time they do not know the date at the moment of the creation of the contract). The issue is that the system propose today's date, even if the user delete the proposed
-
How to convert .MP3 files into .AAC with iTunes 10.5.2
Im running a Mac OS X 10.5.8, and my iTunes version is 10.5.2. I want to convert .MP3 files into .AAC using iTunes, but no option is given for me. What should I do?
-
I've used Myxer since the iPhone 3G. I tried to sync my phone to get new ringtones, but I lost them all. Has this happened to anyone else? How do I fix it?