How to find out the application server instance name?

Hi,
I installed an Oracle application server a long long while ago and completely forgot the things about the installation, including the name of the instance (I installed single instance, not cluster). Now I am trying to create a connection to the application server and I am prompted to fill in the instance name. Where in the installation can I find out the instance name?
The version of the server as displayed when the server is started:
$ ./oc4j -start
Starting OC4J from /oraInventory/j2ee/home ...
09/10/08 16:04:39 Oracle Containers for J2EE 10g (10.1.3.2.0) initializedThis 10.1.3.2.0 number is somewhat confusing. As I understand it, right now if you download a copy of the Application server from Oracle web site, the current version is 10.1.3.1.0.
I am also reading the installation guide now and when looking at the server starting messages on the screen, I realize that installing the server in the oraInventory directory is not quite right. Does that interfere with the correct functioning of the server? I installed it but have never tried to use it until now.
Many thanks for your help!
Newman

J. Newman wrote:
Hi,
I installed an Oracle application server a long long while ago and completely forgot the things about the installation, including the name of the instance (I installed single instance, not cluster). Now I am trying to create a connection to the application server and I am prompted to fill in the instance name. Where in the installation can I find out the instance name?If you have access to that server, then the following should give the instance name.
grep 'IASname' $ORACLE_HOME/config/ias.properties
you should also see it in the AS Control Console page.
The version of the server as displayed when the server is started:
$ ./oc4j -start
Starting OC4J from /oraInventory/j2ee/home ...
09/10/08 16:04:39 Oracle Containers for J2EE 10g (10.1.3.2.0) initializedThis 10.1.3.2.0 number is somewhat confusing. As I understand it, right now if you download a copy of the Application server from Oracle web site, the current version is 10.1.3.1.0.
Regarding the version numbers, this fourth digit refers to the Component-specific release number. The OAS documentation says this about it.
"This digit identifies a release level specific to a component. Different components can have different numbers in this position depending upon, for example, component patch sets or interim releases."
I am also reading the installation guide now and when looking at the server starting messages on the screen, I realize that installing the server in the oraInventory directory is not quite right. Does that interfere with the correct functioning of the server? I installed it but have never tried to use it until now.
Many thanks for your help!
NewmanI think Oracle software should always be installed in a separate directory. I think it may also generate errors in its functioning but it will certainly create a whole lot confusion and mess in later administration and configurations.
hope that helps!
AMN
Edited by: AMN on Oct 8, 2009 5:14 PM

Similar Messages

How to find out the application server info

Hi, I am wondering how to find out the application server info in Java code, just like how to find out the db platform being used. Thanks

Hi,
I am not aware of any spec defined way of finding out such info. There may be vendor specific APIs or mechanisms.
But you can use environment entries in your deployment descriptors to specify the information and make use of the entries inside your j2ee component. That will make your code platform neutral.
Sahoo

How to find out the RasterItem(embedded) links name?

How to find out the RasterItem(embedded) links name which appeared in Links menu(Window->Links) via scripting for illustrator cs3. Please advise me the possibilities.
Thanks for looking into this.

Thanks for your support. From your code i got the filename(embedded) with pathname(if the embedded image in that location). If the embedded image not in that location at that time it throws error message. Is it possible to find out the name of the embedded image, if the corresponding image not in that location. Kindly advise me the possiblitities.
Thanks for looking into this.

How to find out the tablename and column name

Hi,
I have inserted a value (say 'I am here') in a table. but i don't know which is getting inserted this value.
Now i want to know which table and colums has this value (I am here). How to find out as without knowing the table name.
Is there any option to get the tablename and colum??.
Please help me.
thanks.

Does nobody document their code anymore?
See my response Re: How to find out a tablename for one possible solution.
HTH
John

How can I find out the mail server from email address?

Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOU

You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean

How to find out the info regarding Solaris, server hang or shutdown.

Hi
As I am handling the Solaris 9 Server remotely.
As in last week the server has stopped to respond suddenly, we have tried to ping, ssh which was not working. As ultimately we have asked the Data Centre Team to hard reboot the same, to resolve the issue.
In the same ref I would like to know how we come to know the reason, what caused to reboot the same, i.e . any log file, etc..
I have check /var/adm/messages, but not found any detail for the same.
Thanks
Rajan
I

No core files?
No hope for an answer.
As you learned in the other Internet forum.
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-out-the-info-regarding-solaris-server-hang-or-shutdown.-621500/
To get such corefiles analyzed,
you would need to use your service contract and log a support case with Sun.
They have the special software tools to do that.

How to find out Integrated weblogic server version

hi experts,
am using jdev11.1.1.5.0
i h'd big doubt ;)
how to find out Integrated weblogic server version
i think am using weblogic10.1.3. but am not sure?
so how can i found out.
this my log. but i dont see any info about version.
*** Using port 7101 ***
"C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DevSuiteHome_1\jdk\jre\bin\classic;C:\DevSuiteHome_1\jdk\jre\bin;C:\DevSuiteHome_1\jdk\jre\bin\client;C:\DevSuiteHome_1\jlib;C:\DevSuiteHome_1\bin;C:\DevSuiteHome_1\jre\1.4.2\bin\client;C:\DevSuiteHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Duser.timezone="+05:30" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<Feb 17, 2012 5:50:40 AM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Feb 17, 2012 5:50:42 AM GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00220. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Feb 17, 2012 5:50:48 AM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log00102. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log.>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<Feb 17, 2012 5:51:02 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application GeneralLedger is not versioned.>
<Feb 17, 2012 5:51:07 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Rapppdf is not versioned.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00208. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Feb 17, 2012 5:51:27 AM GMT> <Warning> <Server> <BEA-002611> <Hostname "rmsys0061", maps to multiple IP addresses: 192.168.0.161, 192.168.2.161>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.2.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 51640 ms.
IntegratedWebLogicServer started.
[Running application frmtesting on Server Instance IntegratedWebLogicServer...]
[11:21:30 AM] ---- Deployment started. ----
[11:21:30 AM] Target platform is (Weblogic 10.3).
[11:21:31 AM] Retrieving existing application information
[11:21:31 AM] Running dependency analysis...
[11:21:31 AM] Deploying 2 profiles...
[11:21:32 AM] Wrote Web Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting\ViewControllerWebApp.war
[11:21:32 AM] Wrote Enterprise Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting
[11:21:32 AM] Deploying Application...
<Feb 17, 2012 5:51:33 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application frmtesting is not versioned.>
[11:21:40 AM] Application Deployed Successfully.
[11:21:40 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[11:21:40 AM] http://192.168.0.161:7101/frmtesting-ViewController-context-root
[11:21:40 AM] Elapsed time for deployment: 11 seconds
[11:21:40 AM] ---- Deployment finished. ----
Run startup time: 10812 ms.
[Application frmtesting deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/frmtesting-ViewController-context-root/faces/untitled6.jspxhttp://127.0.0.1:7101/console/login/LoginForm.jsp. it stated as weblogicserver 11g admin console
At the botton(copy right section) 10.3.5.0

Hi,
There is one more method,i know
Set the JAVA_HOME and PATH
then execute the
$WL_HOME\wlserver_10.3\server\bin>setWLSEnv.cmd
Go to directory which contains weblogic.jar ($WL_HOME\server\lib) and run below command
$WL_HOME\wlserver_10.3\server\lib>java -cp weblogic.jar weblogic.version
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255
Hope this will be helpful,
Regards
Fabian

How to find out the max mem can be allocatedTT for 32 bit Win ?

How to find out the maximum Permanent Data Size and Temporary Data Size that can be allocated for the Oracle Times Ten for 32 bit Windows OS.

Hi Chris,
Am I write in saying that this also depends on shared memory setting as well?
If that is the case, on a platform like window 2003 32-bit, one cannot have more than 4GB of shared memory. Windows Server 2003 includes support for a startup switch (entered in the boot.ini file) that allows the allocation of memory and memory address space. Regardless of the amount of physical memory that is installed on the system, the operating system uses a virtual address space of 4 GB. Out of that amount, by default, 2 GB is allocated to user-mode processes (for example, Oracle or TimesTen) and 2 GB is allocated to kernel-mode processes (for example the operating system and others). In a nutshell on systems that have more than 1 GB of RAM, this startup switch can be used to allocate more memory to applications (3 GB) and less memory to the operating system (1 GB). However, adding adding the /3GB switch to the boot.ini file will not increase the amount of physical RAM memory, the 3GB switch just tells the computer to allocate the existing memory space differently.
For a 32-bit TimesTen the limit on memory cannot be more than 2GB (PermSize+TempSize). For example on Linux 32-bit I have 1024MB and 512MB for these two parameters.
Thanks,
Mich

How to find out the destination of an "Adaptive RFC Model - DEPRECATED"

Hi All,
How to find out the destination of an "Adaptive RFC Model - DEPRECATED" of an running application
and Where is the destination created in the server .
I have got the code of the running project from NWDI .
Thanks in Advance
Regards
Piyas Kumar

Hi,
I am not sure I fully understand the question, but as per the guide
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50f7192d-2808-2d10-189b-df3fa5f71abf
Excerpt from Page 7
Caveat Confector!1
ARFC1 destinations were created using the Web Dynpro Content Administrator tool. This tool is
still available for compatibility reasons, but the destinations it creates are not used by ARFC2
models!
Instead, you should use the u201CDestinationsu201D tool found on the Configuration Management screen of
the NetWeaver Administrator.
Therefore I think if you look up the application in the WD content Admin, there you can find out what kind of JCO/RFC connections are belonging to it. You can find it on http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
Browse your application here, and then select the JCO Connections tab on the right hand side.
I hope this helps.
Best Regards,
Ervin

How to find out the tables from extract structures

Hi All,
As I know my data sources are 2lis_04_p_matnr,2lis_04_p_comp,2lis_04_p_arbpl.
How to find out the tables concerned with the fields in the extract structure.
Thanks

Pl check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
OR navigate to: help.sap.com - netweaver - bi content - supply chain - look for your application area and the extractor and you will see the source tables and fields.
Ravi Thothadri

How to find out the cost of SAP user for a particular user id

Dear All,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
Raghu

Hello Raghu,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
I think you need to reach out to BASIS consultant to check out the Cost involved for User ID for the SAP application.
Regards,
Sarthak

How to find out the locale setting in a browser?

In my Java web project, the multi-lingual issue on the JSP pages is handled by JSTL. It works fine so far for any input messages. However, some messages come from the container. It is needed to find out the browser's country and language settings inside of the container. My question is how to find out the settings?
Thanks in advance.
v.

Hi, this I found on James' website--see http://www.rf.net/~james/perli18n.html#Q28
Q28. Can web servers automatically detect the language of the browser and display the correct localized page?
A28. Yes. HTTP/1.1 defines the details of how content negotiation works, including language content.
WWW browsers send an Accept-Language request header specifying which languages are preferred for responses. This technique works fairly well, although some versions of Netscape Navigator send an improperly formatted request parameter. Also, switching language preferences in either Navigator or IE 4 doesn't always "take" without first deleting a language hint.
Few sites do content-negotiation on language, and interestingly enough I do not know of any major portals doing this. One site that does is Sun's documentation library at SunDocs. Debian.org does a very nice job of using Apache content negotiation wih languages and also has some nice help info too on Setting the Default Language.
Apache's Content Negotiation features will select the right page to return, whether HTML or image file. Annoyingly, the match logic is very literal, so a browser request for en-us will not match a server entry of en except as a last resort. Any other exact match will win over en, even if en-us was first preference.
There are 2 ways of doing content negotiation with Apache: type or variant maps and multiviews.
Variant Maps
In httpd.conf, disable Options Multiviews if configured and add
AddType type-var var
DirectoryIndex index.var
Then create an index.var file like this:
URI: start; vary="type,language"
URI: index.html.en
Content-type: text/html
Content-language: en-GB
URI: index.html.en
Content-type: text/html
Content-language: en-US
URI: index.html.en
Content-type: text/html
Content-language: en
URI: index.html.fr
Content-type: text/html
Content-language: fr-CA
URI: index.html.fr
Content-type: text/html
Content-language: fr
URI: index.html.es
Content-type: text/html
Content-language: es
Multiviews
The multiviews technique works like this. This does add extra server load, as each content directory must be scanned for the variant document names.
index.html is localized into variant documents such as:
index.html.en (or index.en.html)
index.html.fr
index.html.es
index.html (or index.html.html as a reader has recommended) symlinked to one of the above as the last resort.
Here's an example of http.conf directives for this:
# in httpd.conf
AddLanguage en .en
AddLanguage fr .fr
AddLanguage es .es
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
LanguagePriority en es fr de pt
Options Multiviews
# end of httpd.conf fragment
Starting in Apache 1.2, you may also create documents with multiple language extensions.
O'Reilly's Apache - The Definitive Guide, Chapter 6
ApacheWeek article on Language Negotiation
Another ApacheWeek article on Language Negotiation

How to find out the file name

Hi,
In selection screen (parameter) user will give input TXT file from presentation server to upload to SAP. I need to capture the file name only but not the path and need to concatenate with date stamp and need to download error log in XLS file to presentation server.
How to find out the file name from selection screen?
I searched SCN threads but not found relavant solution.
Thanks,
R Kumar

Hi
This code gets only filename from selection screen :
REPORT x.
PARAMETERS p_file(100).
DATA : gv_full_path LIKE ibipparms-path,
       gv_full_path_string TYPE string,
       gv_filename(100),
       gv_file_ext(3).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Ask user to select file with a popup :
CALL FUNCTION 'F4_FILENAME'
    IMPORTING
      file_name = gv_full_path.
Get filename from path :
gv_full_path_string = gv_full_path.
CALL FUNCTION 'CH_SPLIT_FILENAME'
    EXPORTING
      complete_filename = gv_full_path_string
    IMPORTING
      extension         = gv_file_ext
      name              = gv_filename.
CONCATENATE gv_filename '.' gv_file_ext INTO gv_filename.
p_file = gv_filename.
I hope it helps.

How to find out the image size?

How to find out the image size values(Width and height) in illustrator CS3 using any script. I tried but i got only the document height and width. I need to find out the image BoundingBox value of width and height. Kindly advice me.

Try this.
tell application "Adobe Illustrator"
set heightImage to get height of raster item 1 of current layer of current document
set widthImage to get width of raster item 1 of current layer of current document
display dialog (heightImage & " X " & widthImage) as string
end tell
JaiMS

How to find out the node count?

How to find out the node count in illustrator document through programmatically. Kindly advice me.

Check DBA_HIST_RESOURCE_LIMIT. Your information will be there.
Simialr information is available in DBA_HIST_SYSSTAT.
Look for stat name logons cumulative/logons current - Total number of logons since the instance started/Total number of current logons
You can joing dba_hist_snapshot with snap_id and give begin_interval_time and end_interval_time to know historic process utilization.
Regards,
Sreejith

How to find out the application server instance name?

Similar Messages

Maybe you are looking for