Access Global attribute from with the BSP code.

I have an attribute created within the View controller implementation class. The attribute is called GV_COUNT.
Within my BSP code I want to access this global variable, but I'm getting an error when activating the code, having statements like CLEAR GV_COUNT. in my code.
Is there a format that is required. At the moment I just receive an error saying that field GV_COUNT is unknown.
I thought that anything defined in the controller class was available for anything below.
Jason

Thanks Christian.
Of course the attribute has been made public, and now that you've mentioned 'CONTROLLER' I feel rather foolish, as I should have known this.
Many thanks to yourself and others for the replies.
Regards
Jason

Similar Messages

48 Hours ago I started to upgrade to Mtn Lion on a now 10 day old IMac - 30 minutes ago I got the email with the content code and redeem code for the download from the app store - it said download was happening, but nothing happened for 30 min - FIX IT!

48 Hours ago I started to upgrade to Mountain Lion on a now 10 day old IMac - 30 minutes ago I got the email with the content code and redeem code for the download from the app store - it said download was happening, but nothing happened for 30 min - HOW DO I (or you) FIX IT!?

This is a User's Forum, yelling at us won't help. You have 90 days of customer support via telephone. Use them as they can interact with their system and hopefully get you back on track. Otherwise take it to them at the Genius Bar and have them make it good.

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

You are allowed to have two activated installations, so if you prefer to you can keep ut on the current machine and just install it on the new one like you did originally. If you wish to eliminate it on the other machine, the first thing to do is to deactivate it by opening a program in the suite and selecting Help -> Deactivate in the top toolbar. That is all you need to do to disable the software. At this point if you prefer to you can uninstall it if you like.
As far as getting it on the new nmachine, as I just indicated, just install it like you did the first time.

Reading global attributes from implementation class

Hi,
How to access
global attributes of implementation class
from getter method of context node class.
Thanks in advance,
Srinivas.

Hi Srinivasa,
Access the view controller using attribute
owner
, Then you can access the global attributes.
Regards,
Masood Imrani S.

I BOUGHT LIGHTROOM 5 IN LAREDO TX AND I TRIED TO GET IN MONTERREY MEXICO THE SERIAL NUMBER WITH THE REDEMPTION CODE BUT APPEARS AN ERROR. MY PC IS WINDOWS 8. COULD SOMEBODY HELP ME?

I BOUGHT LIGHTROOM 5 IN BEST BUY LAREDO TX AND I TRIED TO GET IN MONTERREY MEXICO THE SERIAL NUMER WITH THE REDEMPTION CODE FROM THE BOX, BUT APPEARS AN ERROR. MY PC IS WINDOWS 8, COULD SOMEBODY HELP ME??

I don't know that you can purchase Adobe software in the US for installing and using outside of the US.
Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Drawing images gives 2 different results with the same code.

Im adding my code on here, and its sort of long but ill try to explain it. Most of it you can ignore.
Anyway i'm making a tree menu with only 1 level of expansion. So you have a TreeMenu object, and this object has some Branch classes. These Branch classes have Leaf classes. That is all. On the menu there is also a little box where you can click to expand and collapse each branch. if a branch is expanded, all of its leaves are shown. if it is collapsed only the branch name is shown.
So far what I've described above works, there is a small scale compilable working program, that is alright. Theres just a few bugs to fix.
A little feature of the tree is if a branch or a leaf is selected (has been clicked on in the past) it has a blue background. This sort of works. The branch names seem to work alright, and some of the leaves. However other if you run the example i provided you can click on Leaf 1, and it will be ok, but if you click on Leaf 2 then there blue background is twice as big as it should be. But for the rest, it works ok.
This is weird to me because the same code handles any of these same situations. So it seems that i get 2 diferent results with the same code. If anyone would like to help heres some stuff you should know:
You can ignore Leaf class, i dont think theres any errors in there.
You can ignore just about all of Branch class except the update() method.
You can ignore all of TreeMenu class except the inner MouseListener class might be useful.
You can ignore TreeTester. Just the JFrame tester class.
to run the code:
javac TreeMenu.java
java TreeMenu
http://cs.ucsb.edu/~jsterling/treemenu.zip
thanks.

You make a good point Stefan but unfortunately I already checked that. I have even copied the mapping (right click copy) and pasted it from the working Mapping to the bad Map (Paste) to make sure the context values were all the same.
I also opened all the queues and compared the values in each. All values match exactly except for the result(out) queue.
In both tests I am using the same IDOC XML file.
These are the only differences I see.
1. The IDOC is exactly the same as far as I can tell but they come from two different source SWCV. SAP APPL 4.7 and Steelcase_Procurement (ECC 6.0).
2. The working map uses a local UDF. The bad map calls the UDF from a Function Group. Is there a Java version difference between the two?
A better sample of the result queues look like this:
Correct Result:
Thickness of Glass: 20
Height: 10
Width: 5
Length: 18
Thickness of Glass: 10
Height: 15
Width: 8
Length: 14
Bad Result:
Thickness of Glass: 20
<null>
<null>
<null>
Width: 5
<null>
<null>
<null>
I took this chance to redesign my Variant Config output to separate the characteristics/values, but I'm still bothered that I was unable to determine what would cause the differing values.
Any ideas?
Thanks,
Matt

Error: Request failed. unexpected response from server. the status code of response is '0' in safari browser

Hi,
I am using Javascript serializer to send server side code to javascript.
This works in IE 9, Mozilla, chrome. But fails with error in Safari as "request failed. unexpected response from server. the status code of response is '0' . status text of the response is ". null
My code is as below:
<asp:UpdatePanel ID="panLayout" runat="server">
<ContentTemplate>
<div id="divloadingImage" >
<br />
<asp:Image ID="imgLoading" runat="server" ImageUrl="/images/rotate.gif" ImageAlign="Middle" />
<br />
</div>
<div id="banner-fade" >
<ul id="carousel" class="bjqs">
</ul>
</div>
<asp:Timer ID="timerRSS" Interval="1" runat="server" ontick="timerRSS_Tick"></asp:Timer>
</ContentTemplate>
</asp:UpdatePanel>
In CS:
protected void timerRSS_Tick(object sender, EventArgs e)
DisplayImages();
divloadingImage.Visible = false;
bannerfade.Visible = true;
timerRSS.Enabled = false;
private void DisplayImages()
List<SharePointListItem> allImages = GetallImages();
JavaScriptSerializer serializer = new JavaScriptSerializer();
string json = serializer.Serialize(allImages);
string script = string.Format("<script type=\"text/javascript\">var allSliderImages={0}</script>", json);
if (!this.Page.ClientScript.IsClientScriptBlockRegistered("clientScripts"))
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScripts", script, false);
string scriptRegister = string.Format("<script type=\"text/javascript\">FetchData();</script>");
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScriptData", scriptRegister, false);
In Javascript:
function FetchData() {
if (typeof allSliderImages !== "undefined") {
for (var i = 0; i < allSliderImages.length; i++) {
Imagesuccess(allSliderImages[i].fileleafref, allSliderImages[i].filedirref, allSliderImages[i].caption1);
var rota = $("#bannerfade");
rota.css("display", "block");
function Imagesuccess(fileLeaf, fileDir, UserCaption1) {
var ul = $('#bannerfade > ul');
var li;
var filename = fileLeaf;
var dir = fileDir;
var caption1 = UserCaption1;
var sfils = filename;
filename = dir + '/' + filename;
var imageCaptionData;
if (caption1 != null && caption1 != "") {
imageCaptionData = '<div class="HeadlineDiv">' + caption1 + '</div>';
li = $('<li>' + imageCaptionData + '<div class="SubHeadline" style="color:white;">' + '<br/></div>' + '<img src="' + filename + '"/>' + '</li>');
ul.append(li);
$('#bannerfade').bjqs({
height: 354,
width: 970,
responsive: true
Below is the data I get:
<script type="text/javascript">
var allSliderImages=[{"id":"1","Title":"Scenic","caption1":"scenic","fileleafref":"02.jpg","filedirref":"/s/Test/Library"},
{"id":"2","Title":"nature","caption1":"scenic2","fileleafref":"C034.jpg","filedirref":"/s/Test/Library"},
{"id":"3","Title":"Tiff","caption1":"Tiff","fileleafref":"test_tiff.tif","filedirref":"/s/Test/Library"}]</script>
The data is shown in all browsers except Safari. How to fix this?
Update: I have checked this link: http://sharepoint.sureshc.com/2013/07/unexpected-response-data-from-server-in.html
but that did not help.
Thanks

Hi,
From
this documentation, though SharePoint 2013 supports several commonly used web browsers including Apple Safari (latest released version), it is not guarantee
that SharePoint 2013 can run perfectly on all these browsers, “certain web browsers could cause some SharePoint 2013 functionality to be downgraded, limited, or available only through alternative steps”.
According to the code provided, it seems more relate to ASP.NET, therefore, a suggestion is that you can open a thread in ASP.NET forum, communities there will be more familiar
with this issue:
http://forums.asp.net/
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Unable to unlock blackberry curve 3g 9300 with the unlock code

I have the same problem and could not unlock my blackberry curve 3g 9300 from Canada's wind network.
I have called my network provider twice and obtained the unlock code. I also called back to reconfirm the unlock code.
However each time I tried to unlock my blackberry curve 3g 9300 with the unlock code ,it refuses to unlock.
please assist me with a solution.
I am John Green
Calgary,Canada

After the ten attempts have been used, you must get RIM to unlock the device.
There are two routes, and only two, to achieve this.
* IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
* If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ERROR - the ProtectKeyWithTPMAndPIN Method failed with the exit code: 8031005B

Hello
I am using the EnableBitlocker.vbs script to automatically assign the TPM and start the encryption. I am running it from an elevated command prompt. Here is are the arguments I am running with
cscript EnableBitLocker.vbs /on:tp
/l:c:\bitlockerlog.log /promptuser /ro:"MBAM" on
All is well and it prompts the user for a PIN but then it fails.
Here is the full log file. I haven't been able to find any info on the error code in the subject.
Script processing started 02/07/2014 14:43:27
Proper number of command line arguments passed to the script
---------------Executing with the following arguments------------------
Enable parameters: tp
Logging location: c:\bitlockerlog.log
Create recovery key: No recovery key use specified
Encryption method: 3
Create SMS status MIF's: No SMS status MIF's will be created
Reset TPM ownership: 1
User prompting: 1
Connection succeeded to MicrosoftTPM
Successfully retrieved a TPM instance from the Win32_TPM provider class
TPM found in the following state:
Enabled - True
Activated - True
Owned - True
Connection succeeded to MicrosoftVolumeEncryption
TPM is in a ready state to enable BitLocker.
Change TPM owner password specified on the command line.
Random TPM owner password is: ;&K:)BU65|c7_v2n
Completed converting old owner password to owner authorization: 0
Completed converting owner password to owner authorization: 0
Starting to change owner authorization process on the TPM
ERROR - Failed to change owner authorization on the TPM with the following exit code: 80280001
Successfully connected to WMI StdRegProv
Checking if Group Policy encryption method is set...
Found EncryptionMethod with value: 4
Found EncryptionMethod policy registry key ignoring any /em options on command line
Found ActiveDirectoryBackup with value: 1
Found RequireActiveDirectoryBackup with value: 1
Determined client Group Policy configured to require AD escrow of recovery password
EncryptableVolumes count is: 1
The EncryptableVolume(s) found: \\?\Volume{ad6db324-01dd-11e4-8272-806e6f6e6963}\
EncryptableVolume used for encryption is: C:
The volume has a protection status of: 0
BitLocker Protection is Off
Get conversion status is: 0
The volume has a status of fully decrypted
The following user is logged on: MGMT\80151318-sys
Attempting to enable BitLocker TPM + Pin
ERROR - the ProtectKeyWithTPMAndPIN Method failed with the exit code: 8031005B
Script ended 02/07/2014 14:43:51
Any and all help would be appreciated. This has worked before on a different laptop.
Thanks

Hi,
This error indicates that the group policy isn't set correctly, when configure the group policy at teh server side, you should notice that only one of the additional authentication can be required at start up , otherwise a policy occurs, the notice can be
found just like below:
and after test, the error indeed occurs, just like the screen below:
So, I suggest to check the group policy for bitlocker settings, you can only choose one start up authentication method.
Regards
Wade Liu
TechNet Community Support

Issue in printing the batch document with the T-code COPI

Issue in printing the batch document with the T-code COPI.
So Batch document is not printing not printing.
Kindly help.

I would suggest to read this blog as a starting point: Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers
then rephrase and enhance your question with some facts because in the moment it is not at all sufficient enough for anybody to help you further on your particular issue.
I am even in doubt that you posted this issue in the right forum, has this PP transaction really something to do with ABAP Connectivity. Check the space overview page of ABAP Connectivity , under the picture you can read what this space is about.

How can i see if other accounts on my ipod touch with the serial code?

How can i see if other accounts on my ipod touch with the serial code?

What? If other accounts what?

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

What's wrong with the following code?

What's wrong with the following code?
Circle cir1;
double rad = cir1.radius

The circle Object was never instantiated.
In other words, you have set a declaring of a Circle, but it has not been created in memory yet.
You will create it using the " = new Circle( PARAMETERS_HERE ); "
Or some other method that returns a circle.

Please help me out with the function code of print option in module pool

please help me out with the function code of print option in module pool, along with CASE condition.
regards,
asif

Hi
you can use the Function module
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    destination            = 'LP01'                       "'Printer name
    list_name              = 'TEST'
    list_text              = 'SUBMIT ... TO SAP-SPOOL'
    immediately            = ' '
    line_size              = '2000'
    no_dialog              = 'X'             "pass space to Pop screen for Print option
IMPORTING
    out_parameters         = wa_pri_params
    valid                  = w_valid.
"next call below things
NEW-PAGE PRINT ON NO DIALOG PARAMETERS wa_pri_params.
     "and try to Print the values inside the new-page
NEW-PAGE PRINT OFF.
Prabhudas

What is wrong with the idl code generated by packager.exe?

Hello everybody,
I am trying to figure out what is wrong with the idl code generated by packager.exe. In the evaluation for the bug posted at http://developer.java.sun.com/developer/bugParade/bugs/4964563.html it says that the IDispatch interface is not exposed correctly and thus early binding of java objects is not possible using the current activex bridge implementation.
As I am no idl expert I have no idea what that means. However, I managed to dig out the idl code generated by packager.exe for the following example bean:
package test;
public class MyBean
     protected int value;
     public MyBean()
     public void setMyValue(int _value)
          value = _value;
     public int getMyValue()
          return value;
     public MyBean getSelfReference()
          return this;
}The corresponding idl code generated by packager.exe is
uuid(81B0BF63-2A55-11D8-A73E-000475EBF021),
version(1.0)
library MyBean
importlib("Stdole2.tlb");
dispinterface MyBeanSource;
dispinterface MyBeanDispatch;
uuid(81B0BF64-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanSource {
properties:
methods:
uuid(81B0BF65-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanDispatch {
properties:
[id(4097)]
int myValue;
methods:
[id(32768)]
VARIANT_BOOL equals(IDispatch* arg0);
[id(32769)]
IDispatch* getClass();
[id(32770)]
int getMyValue();
[id(32771)]
IDispatch* getSelfReference();
[id(32772)]
int hashCode();
[id(32773)]
void notify();
[id(32774)]
void notifyAll();
[id(32775)]
void setMyValue(int arg0);
[id(32776)]
BSTR toString();
[id(32779)]
VARIANT wait([optional] VARIANT var0, [optional] VARIANT var1);
uuid(81B0BF62-2A55-11D8-A73E-000475EBF021),
version(1.0)
coclass MyBean {
[default, source] dispinterface MyBeanSource;
[default] dispinterface MyBeanDispatch;
};Does anyone know what is wrong with this code and maybe how to fix the idl code? Generating the dll should then be easy (I already tried several variations of the idl code but as my idl knowledge is limited it didn't really do what I wanted).

Then the question is why it does work with visual controls (even if you set them to non-visible)?

Access Global attribute from with the BSP code.

Similar Messages

Maybe you are looking for