Access server not displaying ROMMON mode target device

Hi All,
I'm encountering a curious problem (or I'm overlooking something).
I'm configuring a console server for configuring remote devices. This is working well except for the fact that if a target device is in ROMMON mode, the console server refuses to displays the target device console. It does open the connection but the ROMMON prompt is not shown on the console server . This is essential for this device as we will need to use it to reset passwords remotely and thus need to be able to access ROMMON mode from the console server.
Parts used are a 2951 router and a HWIC-8A serial card. Does anyone has some ideas?
Posted my config below:
[code]
Current configuration : 4389 bytes
! Last configuration change at 04:19:45 UTC Wed Sep 19 2012
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
no aaa new-model
crypto pki token default removal timeout 0
no ipv6 cef
ip auth-proxy max-login-attempts 5
ip admission max-login-attempts 5
ip host Chassis1 2002 100.0.0.1
ip host Chassis2 2003 100.0.0.1
ip host Chassis3 2004 100.0.0.1
ip host Chassis4 2005 100.0.0.1
ip host Chassis5 2006 100.0.0.1
ip host Chassis6 2007 100.0.0.1
ip host Chassis7 2008 100.0.0.1
ip host Chassis8 2009 100.0.0.1
ip cef
multilink bundle-name authenticated
license udi pid CISCO2951/K9 sn FCZ13507226
hw-module sm 1
redundancy
interface Loopback0
ip address 100.0.0.1 255.255.255.255
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet1/0
no ip address
shutdown
interface GigabitEthernet1/1
description Internal switch interface connected to EtherSwitch Service Module
no ip address
interface Vlan1
no ip address
interface Async0/0/0
no ip address
encapsulation slip
interface Async0/0/1
no ip address
encapsulation slip
interface Async0/0/2
no ip address
encapsulation slip
interface Async0/0/3
no ip address
encapsulation slip
interface Async0/0/4
no ip address
encapsulation slip
interface Async0/0/5
no ip address
encapsulation slip
interface Async0/0/6
no ip address
encapsulation slip
interface Async0/0/7
no ip address
encapsulation slip
ip forward-protocol nd
no ip http server
no ip http secure-server
menu TS title ^C
Virtual Lab Terminal Server
To exit from a device, use CTRL+SHIFT+6 then press x
^C
menu TS prompt ^C Your selection : ^C
menu TS text 1 Connect to Rack1 - Chassis1
menu TS command 1 resume Chassis1 /connect telnet Chassis1
menu TS text 2 Connect to Rack1 - Chassis2
menu TS command 2 resume Chassis2 /connect telnet Chassis2
menu TS text 3 Connect to Rack1 - Chassis3
menu TS command 3 resume Chassis3 /connect telnet Chassis3
menu TS text 4 Connect to Rack1 - Chassis4
menu TS command 4 resume Chassis4 /connect telnet Chassis4
menu TS text 5 Connect to Rack1 - Chassis5
menu TS command 5 resume Chassis5 /connect telnet Chassis5
menu TS text 6 Connect to Rack1 - Chassis6
menu TS command 6 resume Chassis6 /connect telnet Chassis6
menu TS text 7 Connect to Rack1 - Chassis7
menu TS command 7 resume Chassis7 /connect telnet Chassis7
menu TS text 8 Connect to Rack1 - Chassis8
menu TS command 8 resume Chassis8 /connect telnet Chassis8
menu TS text s show all established sessions
menu TS command s show sessions
menu TS options s pause
menu TS text c<no> clear the session by number ie: c5
menu TS text e menu-exit
menu TS command e menu-exit
menu TS text q Quit terminal server session
menu TS command q exit
menu TS command c1 c1
menu TS command c2 c2
menu TS command c3 c3
menu TS command c4 c4
menu TS command c5 c5
menu TS command c6 c6
menu TS command c7 c7
menu TS command c8 c8
menu TS clear-screen
menu TS line-mode
control-plane
alias exec c1 disconnect Chassis1
alias exec c2 disconnect Chassis2
alias exec c3 disconnect Chassis3
alias exec c4 disconnect Chassis4
alias exec c5 disconnect Chassis5
alias exec c6 disconnect Chassis6
alias exec c7 disconnect Chassis7
alias exec c8 disconnect Chassis8
line con 0
transport output all
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 0/0/0 0/0/7
exec-timeout 0 0
no exec
transport input all
transport output none
stopbits 1
flowcontrol hardware
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
flowcontrol software
line vty 0 4
login
transport input all
scheduler allocate 20000 1000
end
Router#
[/code]

This appeared to be a hardware issue and is solved. Configuration of the access server was o.k..

Similar Messages

NCipher server not in operational mode : Cisco NAC

One of the NAC server got rebooted and then while restart i am getting an error nCipher server not in operational mode. Please change the settings on back of the card. Also error-sshd-server not running.
Please let me know how to make the ncipher in operational mode and change the mode of NAC in FIPS mode.
It is very urgent. Please let me know the solution.
Regards,
Tarunava

The Cisco NAC is 3315 and software version is 4.1.2.
Below are the error logs.
[root@PLHO_CAS_01 ~]# cd /perfigo/common/bin/
[root@PLHO_CAS_01 bin]# ./test_fips.sh info
Installed FIPS card is nCipher
Info-FIPS file exists
NFastApp_Connect failed: ServerNotRunning
Error-card is not in operational mode
Error-httpd worker is in Non FIPS mode
Error-sshd not up
System not in FIPS mode
[root@PLHO_CAS_01 bin]#
[root@PLHO_CAS_01 ~]# /etc/init.d/sshd start
Starting sshd:WARNING: initlog is deprecated and will be removed in a future rel
ease
key_load_private_pem: RSA_blinding_on failed
Could not load host key: /root/.perfigo/sec/tomcat.key
Disabling protocol version 2. Could not load host key
sshd: no hostkeys available -- exiting.
[FAILED]
[root@PLHO_CAS_01 ~]# /etc/init.d/httpd start
Starting httpd: Syntax error on line 167 of /etc/httpd/conf/httpd.conf:
DocumentRoot must be a directory
[FAILED]

Open pdf in IE using #toolbar = 0 does not display read mode menu

I m trying to open up a pdf document using IE 9 and Adobe Reader XI and if I have the toolbar hidden the first time the document displays the read mode menu bar does not display. I have to refresh the browser to get the read mode menu to display.
How do I get the read mode menu bar to display every time?
I have been able to reproduce this issue consistently using the link : http://www.adobe.com/misc/pdfs/TM_GuideforThirdPartiesFinalPrint.pdf#toolbar=0&navpanes=0

I mean, When I click on link which contains the PDF, The link gets open in another TAB of browser but not in proper format, please refer below mentioned screen shot.
he attach screen shot.

CoreID Access Server not reading Authentication Plugin

Hello all! I've written an authentication plugin (.dll) for use with the CoreID Access Server in C++ .NET using the CoreID Managed Code (.NET) API. Everything compiles fine and I believe I've complied to the interface CoreID expects. However, when the access server starts it chokes on the plugin and this is the error message generated by the server:
UTC - Access Server File Logger
ERROR0x000003B6 base\obsharedobj.cpp:44 "Could not read file"
shlibname^C:\Program Files\csm\access/oblix/lib/csmAuthnSSOPlugin.dll
ACCESS_SERVER ERROR0x00001136 \Oblix\coreid\palantir\aaa_server\src\plugins.cpp:1329
"Error while loading the plug-in symbols" tmpdso^csmAuthnSSOPlugin
I thought perhaps a dependency .dll was not present on the server, i.e. managed_plugin_interface.dll, however it is present in an appropriate lib directory. So...any ideas out there? :-)

If you have reinstalled Access Server, try running the Access Server configuration utility. I think its obacc*.exe or search for exe file name.
Once you retype all the configuration info, it should start.
Thanks
Ram

Exchange 2013 - Proxy through client access server not working

Hello All -
I recently migrated our company to Exchange 2013 and noticed that our email was leaving through the mailbox server. I put a check mark in the Send Connector where it says "Proxy through Client Access Server" and my mail is still coming from the
mailbox server. How can I go about fixing this problem?
Environment:
1 CAS Server
1 Mailbox Server
Both server are behind the firewall with only port 25 opened to the CAS. The CAS has a Send Connector to a smart host for all messages.
Thank you!
Ryan

Hi,
Please check if the outbound messages without smart host are coming from CAS .
I doubt it send to the smart host directly if you configure smart host, and not use proxy thogh CAS.
If you have any feedback on our support, please click
here
Wendy Liu
TechNet Community Support

DBA Cockpit Sybase ASE - Access Plan not displayed

Hello,
We are running SAP ECC 740 on Sybase ASE 15.7, I'd previously used DBA Cockpit to view access plans for queries prior to our ECC upgrade. Since upgrading to 740 DBA Cockpit has had a facelift, and now I can't see an Access Plan when I try clicking "Show Plan" on the cached statements or when I try clicking EXPLAIN in ST05 - I just get a red cross (see attached image).
Does anyone have any ideas about how to view the access plan? If I try a Runtime Explain I get a blue spinning half-a-loop and it just sits spinning and never displays anything.
Thanks, Chris

Hi,
I am running java 8 update 4 i.e. java 1.8! so I would suggest as per stefan also upgrade yoru java version.
Advanced settings on java control panel:
Debugging                              - not selected
Java console                         -hide console selected
Default Java for browsers          -InternetExplorer
Shortcut creation                    -Prompt user if hinted
JNLP File/Mime Association     -Prompt user
Application Installation               -install if hinted
Secure Execution Environment    -all select but (Show site certificate from server even when listed)
Mixed code sanbox vs trusted    -Enable (show warning if needed)
Perform signed code certificate revocation checks on - All certificates in chain of trust
Checked for signed code certificate revocation using - Both CRLs and OCSP
Perform TLS certificate revocation checks on - all certificates in chain of trust
Checked for TLS certificate revocation using - Both CRLs and OCSP
Advanced security settings: all select but (Use SSL 2.0 compatible ClientHello format)
Miscellaneous                               - nothing selected
Kind Regards,
Johan

Links not displaying properly on mobile devices

Hi All,
I am having trouble with my website when viewing it on a mobile device (android, iphone). Everything displays well on the mobile devices except for links. Excluding menu items, everytime there is a link on the page, it creates a huge white space.
The website is http://www.conbeth.com. When viewed on a mobile device, you can really see the problem at http://conbeth.com/services.html. You can also see a problem on this page http://conbeth.com/forsaleresidential.html where there should be links to flyers and photos under the fist and second homes for sale, but on the mobile devices they are not there.
This has me completely stumped. Does anyone know what might be causing this problem?
I will provide any code you need. Thanks!

Spry menus are not Touch Screen friendly or suitable for Responsive Web Designs (optimized for mobile, tablet and desktops). That's part of why Adobe abandoned the Spry framework last year. If you want mobile friendly, you need a better menu system.
Project Seven Responsive Tabs (commercial DW extension)
http://www.projectseven.com/products/tools/tpm2/tutorials/responsive/index.htm
Pop-Menu Magic3 by PVII (NEW commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
jQuery Superfish (open source)
http://users.tpg.com.au/j_birch/plugins/superfish/
Nancy O.

Second BizTalk server not displaying

Recently setup a SCOM 2012 server and deployed the agent to two BizTalk 2013 servers, one designated as our development environment and the other our QA environment. Agents install without issue, indicate that they have received and successfully logged in
using the designated RunAs account, and receive the latest configuration file from the management server. I have enabled the two BizTalk servers to act as proxies in the Operations Manager console.
I have found other message threads indicating that by default my SCOM system will only reflect information from the first BizTalk system discovered and that I need to configure an override to enable monitoring of my second server. In one of the threads (Scom
2007 not discovering Biztalk 2010 Biztalk MP Documentation Question) it actually provides the exact steps I need to create the override so that there is no confusion on my part.
I followed these steps to create the override and then something strange happened. The second server did not appear in the Monitoring window, and now the first server's information no longer displays.
What went wrong? And better, more important question, is how do I correct the situation to get both BizTalk servers to display and be monitored?
Thank you,
Steve

Hi Steve,
Since you are running SCOM 2012 to monitor BizTalk 2013 servers, please change those overrides back. If SCOM discover two BizTalk 2013 servers, it will collect and reflect the information on both servers. You just need to follow the MP guide.
Niki Han
TechNet Community Support

Dynamic Menu not displaying correctly on iOS devices

Can't get my dropdown menus to display correctly when viewing on iPhone & iPad. For some reason the submenu will become visable but not let me select anything before disappearing again. Works fine on desktop browsers.

Just realised the parent element of the submenu is linking to a page, as soon as I took off the link, it works fine. Is there a way I can get it so that the first click brings up the submenu even if there is a link to another page.

Japanese Partner access names not displaying correctly

Japanese external users' displaying name comes as "????", however their user profile stored correctly in AD. Modifying Locale and Language Settings doesn't seem to have an effect. Does anyone suggest
an approach to solving?

Hi,
According to your post, my understanding is that you have an issue about the display name for users created by Japanese.
What did you mean the Japanese external user stored correctly in AD?
Per my knowledge, the external users are not stored in your organisation, that means they are not stored in your AD.
If the users stored in the AD, per my test, the user name will display well no matter what language created.
You can check the user profile in the user profile service to make sure the user has been synced properly.
Central Administration->Application Management->Manage Service Applications->User Profile Service Application->Manage User Profile
To narrow down whether the issue is related to the user itself, you can create a new user in the AD, then check whether it works.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Blog server not displaying OD user blogs after restart after 10.5.7 update

I've just applied the 10.5.7 update and after reboot the blog/wiki service shows blogs for local user accounts, but not for accounts from the Open Directory (not allowed message). However all accounts are accessible if I stop and start the wiki manually by the folowing caommand in terminal:
sudo serveradmin stop teams
sudo serveradmin start teams
Is anyone else having this problem? If so, any idea how to get a fix in place?

Suggest you read my tip at
http://discussions.apple.com/thread.jspa?threadID=2004922&tstart=0
on how to get 10.5.7 to display in you installed updates
System Preferences/Software Update/Installed Updates

Index Server not Displayed

Hi All,
I am working in EP6 SP 9 Patch 3 for KMC. I had my Trex working for searching docs less than 10 kb. Now i dont find my Index server in Trex monitor.In Trex Admin tool I find my index server in green status. But in Trex monitor it displays only Http server and Name server. Index server is missing and Queue server is shown without any parameters.
Can anyone help me in bring back the Index server and Queue server.
Thanks in advance
Jay.

Hi Nick
I dont have a proxy setup. The only proxy that i have is my company's proxy server. As such i haven't installed any proxy while installing EP. Is there anything i need to do with IIS server? Awaiting your reply.
Jay

Access connections not displaying in range wireless networks

A couple of weeks ago I had a problem with my X200 (Win 7 64bit) which hung during bootup and had to be recovered by a hard power down. It restarted OK but ever since then Access connections does not show any wireless connections available. It will actually connect by wireless no problem but I now have no choice on what I can connect to. I tried a system restore to a point before the problem started - still the same. I tried the Lenovo phone helpdesk and they suggested re-installing the Wi-fi driver by downloading and installing the most recent update. The machine is fitted with an Intel Wi-fi Link 5100 and I've installed the latest driver 13.02.0000. The installation instructions also indicted that I needed to update the Thinkpad Power Management driver, Thinkvantage Access Connections and Hotkey Features Integration for compatibility with the latest Wifi driver, which I did in reverse order. After all this, the problem still persists. Any ideas on how to fix it would be greatly appreciated.

So, I uninstalled Access Connections and reinstalled via Lenovo Update.
It now works, yet i could only innitially connect via "details" and not graphical... after which the graphical interface now reads the network as being there and connected (it took a while for it to show up)
I will update whether or not this "fix" sticks.
For those of you who are like "Why use Access Connections at all?",--I like the customizable profiles (performance vs power savings, proxy etc)

Since upgrading to 8.0.1, on 80% of the addresses entered Firefox give me a "server not available - try again" error message. What did you guys do?

Since upgrading two days ago to Firefox 8.0.1 I get this error message on 80% of the addresses I try to access:
Server not found
Firefox can't find the server at orders.tigerdirect.com
Check the address for typing errors such as
ww.example.com instead of
www.example.com
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
What's the problem with the upgrade?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

One Touch Access Could not connect on the selected...

Hi,
I need some help, ever since I upgrade my PC Suite to PC Suite 7.1.26 I get this "One Touch Access Could not connect on the selected device"
FYI, I connect through cable USB and I'm using N85
Really hope somone can help me on this..
Rgrds

Hi,
Please check SAP note:
1570958 - SAP Business One Integration Technology Installation on
Windows XP - SAP Business One Integration Service Cannot be Started
Thanks & Regards,
Nagarajan

Access server not displaying ROMMON mode target device

Similar Messages

Maybe you are looking for