DBA Cockpit Sybase ASE - Access Plan not displayed

Hello,
We are running SAP ECC 740 on Sybase ASE 15.7, I'd previously used DBA Cockpit to view access plans for queries prior to our ECC upgrade. Since upgrading to 740 DBA Cockpit has had a facelift, and now I can't see an Access Plan when I try clicking "Show Plan" on the cached statements or when I try clicking EXPLAIN in ST05 - I just get a red cross (see attached image).
Does anyone have any ideas about how to view the access plan? If I try a Runtime Explain I get a blue spinning half-a-loop and it just sits spinning and never displays anything.
Thanks, Chris

Hi,
I am running java 8 update 4 i.e. java 1.8! so I would suggest as per stefan also upgrade yoru java version.
Advanced settings on java control panel:
Debugging                              - not selected
Java console                         -hide console selected
Default Java for browsers          -InternetExplorer
Shortcut creation                    -Prompt user if hinted
JNLP File/Mime Association     -Prompt user
Application Installation               -install if hinted
Secure Execution Environment    -all select but (Show site certificate from server even when listed)
Mixed code sanbox vs trusted    -Enable (show warning if needed)
Perform signed code certificate revocation checks on - All certificates in chain of trust
Checked for signed code certificate revocation using - Both CRLs and OCSP
Perform TLS certificate revocation checks on - all certificates in chain of trust
Checked for TLS certificate revocation using - Both CRLs and OCSP
Advanced security settings: all select but (Use SSL 2.0 compatible ClientHello format)
Miscellaneous                               - nothing selected
Kind Regards,
Johan

Similar Messages

  • Explain plan not displayed in sql trace file

    Hello,
    I don't understand why in sql trace file, after tkprof transformation, for several queries the explain plan is displayed and for several queries, no explain plan is displayed.
    How can I have the explain plan for all queries?
    Thanks for your help.

    Was this a trace started on an already running task? Was the trace stopped before the task completed? Did the trace file reach its set size limit before the task compled?
    In all three cases above you would have cursors that were not closed and stats information not written to the trace file resulting in incomplete data for some SQL.
    HTH -- Mark D Powell --

  • Access server not displaying ROMMON mode target device

    Hi All,
    I'm encountering a curious problem (or I'm overlooking something).
    I'm configuring a console server for configuring remote devices. This is working well except for the fact that if a target device is in ROMMON mode, the console server refuses to displays the target device console. It does open the connection but the ROMMON prompt is not shown on the console server . This is essential for this device as we will need to use it to reset passwords remotely and thus need to be able to access ROMMON mode from the console server.
    Parts used are a 2951 router and a HWIC-8A serial card. Does anyone has some ideas?
    Posted my config below:
    [code]
    Current configuration : 4389 bytes
    ! Last configuration change at 04:19:45 UTC Wed Sep 19 2012
    version 15.2
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    boot-start-marker
    boot-end-marker
    no aaa new-model
    crypto pki token default removal timeout 0
    no ipv6 cef
    ip auth-proxy max-login-attempts 5
    ip admission max-login-attempts 5
    ip host Chassis1 2002 100.0.0.1
    ip host Chassis2 2003 100.0.0.1
    ip host Chassis3 2004 100.0.0.1
    ip host Chassis4 2005 100.0.0.1
    ip host Chassis5 2006 100.0.0.1
    ip host Chassis6 2007 100.0.0.1
    ip host Chassis7 2008 100.0.0.1
    ip host Chassis8 2009 100.0.0.1
    ip cef
    multilink bundle-name authenticated
    license udi pid CISCO2951/K9 sn FCZ13507226
    hw-module sm 1
    redundancy
    interface Loopback0
    ip address 100.0.0.1 255.255.255.255
    interface Embedded-Service-Engine0/0
    no ip address
    shutdown
    interface GigabitEthernet0/0
    no ip address
    shutdown
    duplex auto
    speed auto
    interface GigabitEthernet0/1
    no ip address
    shutdown
    duplex auto
    speed auto
    interface GigabitEthernet0/2
    no ip address
    shutdown
    duplex auto
    speed auto
    interface GigabitEthernet1/0
    no ip address
    shutdown
    interface GigabitEthernet1/1
    description Internal switch interface connected to EtherSwitch Service Module
    no ip address
    interface Vlan1
    no ip address
    interface Async0/0/0
    no ip address
    encapsulation slip
    interface Async0/0/1
    no ip address
    encapsulation slip
    interface Async0/0/2
    no ip address
    encapsulation slip
    interface Async0/0/3
    no ip address
    encapsulation slip
    interface Async0/0/4
    no ip address
    encapsulation slip
    interface Async0/0/5
    no ip address
    encapsulation slip
    interface Async0/0/6
    no ip address
    encapsulation slip
    interface Async0/0/7
    no ip address
    encapsulation slip
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    menu TS title ^C
    Virtual Lab Terminal Server
    To exit from a device, use CTRL+SHIFT+6 then press x
    ^C
    menu TS prompt ^C Your selection : ^C
    menu TS text 1 Connect to Rack1 - Chassis1
    menu TS command 1 resume Chassis1 /connect telnet Chassis1
    menu TS text 2 Connect to Rack1 - Chassis2
    menu TS command 2 resume Chassis2 /connect telnet Chassis2
    menu TS text 3 Connect to Rack1 - Chassis3
    menu TS command 3 resume Chassis3 /connect telnet Chassis3
    menu TS text 4 Connect to Rack1 - Chassis4
    menu TS command 4 resume Chassis4 /connect telnet Chassis4
    menu TS text 5 Connect to Rack1 - Chassis5
    menu TS command 5 resume Chassis5 /connect telnet Chassis5
    menu TS text 6 Connect to Rack1 - Chassis6
    menu TS command 6 resume Chassis6 /connect telnet Chassis6
    menu TS text 7 Connect to Rack1 - Chassis7
    menu TS command 7 resume Chassis7 /connect telnet Chassis7
    menu TS text 8 Connect to Rack1 - Chassis8
    menu TS command 8 resume Chassis8 /connect telnet Chassis8
    menu TS text s show all established sessions
    menu TS command s show sessions
    menu TS options s pause
    menu TS text c<no> clear the session by number ie: c5
    menu TS text e menu-exit
    menu TS command e menu-exit
    menu TS text q Quit terminal server session
    menu TS command q exit
    menu TS command c1 c1
    menu TS command c2 c2
    menu TS command c3 c3
    menu TS command c4 c4
    menu TS command c5 c5
    menu TS command c6 c6
    menu TS command c7 c7
    menu TS command c8 c8
    menu TS clear-screen
    menu TS line-mode
    control-plane
    alias exec c1 disconnect Chassis1
    alias exec c2 disconnect Chassis2
    alias exec c3 disconnect Chassis3
    alias exec c4 disconnect Chassis4
    alias exec c5 disconnect Chassis5
    alias exec c6 disconnect Chassis6
    alias exec c7 disconnect Chassis7
    alias exec c8 disconnect Chassis8
    line con 0
    transport output all
    line aux 0
    line 2
    no activation-character
    no exec
    transport preferred none
    transport input all
    transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    stopbits 1
    line 0/0/0 0/0/7
    exec-timeout 0 0
    no exec 
    transport input all
    transport output none
    stopbits 1
    flowcontrol hardware
    line 67
    no activation-character
    no exec
    transport preferred none
    transport input all
    transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    stopbits 1
    flowcontrol software
    line vty 0 4
    login
    transport input all
    scheduler allocate 20000 1000
    end
    Router#
    [/code]

    This appeared to be a hardware issue and is solved. Configuration of the access server was o.k..

  • IBM Rational Team Concert Project Plans not displaying correctly on Firefox 7

    Rational Team Concert (RTC) is a project management tool from IBM. Since installing Firefox V7.0 on 9/27/11, several columns of data are completely or partially displaying blank. If I go back to Internet Explorer the data appears properly (but IE is too slow to use). Also my peers who are still using Firefox 6.0.2 are not having any problems. I have restarted Firefox 7 without add-ons and also restarted with a new profile as suggested in V7.0 troubleshooting tips but have the same results
    RTC is licensed from IBM but runs on a local server.

    I think RTC only officially supports Firefox 3.6, but I may have found the wrong system requirements page... here are some random thoughts.
    (1)
    Do you know whether RTC uses anything other than ordinary HTML/CSS/JavaScript to construct pages, such as a Java applet or an add-on? You can check for any blocked add-ons here:
    orange Firefox button ''or'' Tools menu > Add-ons
    On the left click Extensions, then scroll through the active ones down to any grayed-out ones.
    (2)
    Are the blank columns usually filled in dynamically after the page loads (i.e., using AJAX techniques)?
    You could check for script errors. These don't usually allow you to solve the problem for yourself, but might give rise to some ideas for workarounds.
    To open Firefox's error console, press Ctrl+Shift+j and click the Clear button. Then reload the page and check for errors (you can use the Error button to filter out all the other noise, such as style warnings). Anything notable?
    (3)
    To see whether this problem is caused by the HTML5 parser, you can turn that off. Please save any unfinished work first.
    (i) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (ii) In the filter box, type or paste '''html5''' and pause while the list is filtered
    (iii) Double-click '''html5.parser.enable''' to toggle it to false (it should turn bold).
    Then return to the problem page and reload. Does that make any difference?

  • Benefit - Insurance Plan not display at enrollment screen

    Hi,
    The issue is unable to see the configured Insurance plan at the enrollment screen (HRBEN0001).
    What possibility that could caused this?
    Thanks
    Nikki

    Ted,
    Notice that in enrollment screen, I've clicked the adjustment reason, the plan screen is blank, I click the "error" button - there is message indicating that "wage type for salary calculation base does not exist".
    Thanks

  • Japanese Partner access names not displaying correctly

    Japanese external users' displaying name comes as "????", however their user profile stored correctly in AD. Modifying Locale and Language Settings doesn't seem to have an effect. Does anyone suggest
    an approach to solving?

    Hi,
    According to your post, my understanding is that you have an issue about the display name for users created by Japanese.
    What did you mean the Japanese external user stored correctly in AD?
    Per my knowledge, the external users are not stored in your organisation, that means they are not stored in your AD.
    If the users stored in the AD, per my test, the user name will display well no matter what language created.
    You can check the user profile in the user profile service to make sure the user has been synced properly.
    Central Administration->Application Management->Manage Service Applications->User Profile Service Application->Manage User Profile
    To narrow down whether the issue is related to the user itself, you can create a new user in the AD, then check whether it works.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Access connections not displaying in range wireless networks

    A couple of weeks ago I had a problem with my X200 (Win 7 64bit) which hung during bootup and had to be recovered by a hard power down.  It restarted OK but ever since then Access connections does not show any wireless connections available.  It will actually connect by wireless no problem but I now have no choice on what I can connect to.  I tried a system restore to a point before the problem started - still the same.  I tried the Lenovo phone helpdesk and they suggested re-installing the Wi-fi driver by downloading and installing the most recent update.  The machine is fitted with an Intel Wi-fi Link 5100 and I've installed the latest driver 13.02.0000.  The installation instructions also indicted that I needed to update the Thinkpad Power Management driver, Thinkvantage Access Connections and Hotkey Features Integration for compatibility with the latest Wifi driver, which I did in reverse order.  After all this, the problem still persists.  Any ideas on how to fix it would be greatly appreciated.

    So, I uninstalled Access Connections and reinstalled via Lenovo Update.
    It now works, yet i could only innitially connect via "details" and not  graphical... after which the graphical interface now reads  the network as being there and connected (it took a while for it to show up)
    I will update whether or not this "fix" sticks.
    For those of you who are like "Why use Access Connections at all?",--I like the customizable profiles (performance vs power savings, proxy etc)

  • ODI-15005 Sybase ASE Enterprise does not exist

    Please Help, i'm in Customer Side.

    Hi Joe,
    This error means that you have a Sybase column with a data type that is not supported by the Knowledge Module. You have to identify this column, change the data type and update the ODI model:
    ODI-15005: The datatype source: {0} for the technology: {1} does not exist.
    Cause: The datatype for a column is not supported by the technology.
    Action: Change the datatype or the technology of the execution location.
    Check that web site if you want more information about Oracle Data Integrator error:
    http://docs.oracle.com/cd/E28389_01/core.1111/e10113/chapter_odi_messages.htm
    Hope it helps.
    Regards,
    David Mendele
    BI / EPM Project Manager at Business & Decision.
    Lima, Perú

  • SAP DBA Cockpit for Sybase ASE/IQ/RS

    SAP has adjusted the lately cockpit to work with Sybase ASE (IQ?/RS?).
    Is there a trial version available for inspection?  Will the cockpit be distributed like SC/SCC to the customers in the long run?
    Those responsible for the distribution, I'd appreciate your comment on this.
    Thank you.
    Andrew

    Hi Mandla.
    Please have a look at:
    Installation & Upgrade -> Browse our Download Catalog -> SAP Development Projects -> Sybase ASE 15.7 TestDrive
    Regards,
    Jan

  • User not displaying in Hyperion Planning 11.1.1.3

    Hi All,
    i have create users in Shared Services and assign provison on Planning application.
    after this i log in to planing when i m trying to assign access on perticuler dimention
    Assign Access>>add Access under this user and group tab user is not displaying whetever i have created in shared services and given the provision.
    can any budy help me out what an issues with this and how can it is visible to all user.
    Thanks
    Pramod

    Hello-
    I asume that you have asigned user to a group and have provisioned Group in shared service. Can you try provisioning the User directly in shared service and unassign him from the group. Refresh the user list via planning and see if user
    exist or not.. Assign the user to one dimension and see if you can see the user in refresh security filters tab. Refresh the security filter for user ..Also dont forget to refresh the security from EAS & see if the group & user you created in
    shared service you are able to see in EAS. Once u see user & group over there try ur normal procedure of unassigning the user and assigning him to the group and it should work fine.. I have encountered this problem in 9.3.1 and doing
    above was able to resolve it. I am not sure about 11.1.1.3 seems by ur post ur application is classic planning app.
    Thanks!

  • Type of command is not allowed to be executed: DBA Cockpit

    Hi there,
    I found this error everytime i execute command at DBA Cockpit: SQL Command line
    Type of command is not allowed to be executed.
    FYA, i logged on as user that has SAP_NEW & SAP_ALL profiles. And no issue when i run the command on isql (console version) as syb[SID].
    Appreciate for your reply.

    Hi Deepak,
    1) Check with use <SID> go
         Tried, Same output.
    2) Please also check whether all the latest dba_cockpit corrections have been implemented.
        I hv applied sap notes 1245200 1088717.
    Tried use <SID> go , Same output.
    Applied sap notes :
    Note 1245200 - DBA: ICF Service-Activation for WebDynpro DBA Cockpit
    Note 1088717 - Active services for Web Dynpro ABAP in transaction SICF
    I have 2 systems; Installed with ASE 15.7 SP65 & ASE 15.7 SP101. both having same issue.

  • DBA Cockpit: Planning calendar and remote Oracle databases- which method?

    For using DBA Planning Calendar to schedule BR*Tools for remote Oracle database AS Java systems I have successfully implemented both the Secure Shell and SAP gateway methods in [Note 1025707 - DBA Cockpit: Planning calendar and remote Oracle databases|https://service.sap.com/sap/support/notes/1025707] and was interested in which of these two methods others have found to be more supportable and maintainable?
    In more detail, the note has these two methods for non-ABAP remote systems:
    2. Connection through Remote/Secure Shell
    Specifically Secure Shell. Rejecting remote shell as too old and insecure a protocol.
    3 Connection through SAP gateway
    The note provides clues as to how these methods work. Expanding on that:
    With #2, central ABAP system calls out to its OS user level to execute the ssh client (after gw/rem_start has been set to the non-default value SSH_SHELL) which it finds in the location specified in gw/ssh (default value is /usr/bin/ssh). It must use password-less authentication and the key-based authentication must also not require a passphrase. (Using ssh-agent is not an option since this is being called from SAP, not from your own script.)
    It remotely runs via ssh a command, sapxpg, which must be found in the PATH of the remote user. (This is why the note, which has you place this exe sapxpg and a subset of the BR*Tools in the home dir of the remote user, also has you make sure the home dir is included in the path--your OS might or might not include the user's home dir in the path in the default shell environment for a new user.)
    Then via sapxpg, the BR*Tools are invoked.
    One thing that may be confusing here is you have to check at least one gateway parameter 'gw/...' in the central system to get the method #2 the non-gateway method to work--this is because the two methods are technically almost the same: in #2, secure shell is used to basically start a gateway on the fly with sapxpg in order to call the BR*Tools each time a DBA Planning Calendar action runs or you view DBA or Backup logs of the remote system from the central system. With #3, the gateway runs continuously on the remote system.
    With #3, central system connects to remote SAP standalone gateway, which executes the BR*Tools installed in the standard SAP kernel directory of the SAP gateway. This method is simpler to describe so it sounds like it has less components than the secure shell method, however you do have an entire SAP system running, although it is just a standalone gateway.
    Thoughts:
    These pros/cons are UNIX/Linux-oriented since I assume most Windows environments do not have added 3rd-party products that provide secure shell so SAP gateway is the only method.
    Secure shell
    + Less software required (not counting secure shell which comes with the operating system distribution): just a few SAP executables placed in the home dir of an ordinary user on the remote system.
    + Secure shell service probably automatically starts upon boot of the remote system operating system.
    + Secure shell is a widely used tool outside of SAP for executing commands remotely without passwords.
    - Installation is non-standard: shell environment of remote user is not adapted by SAP installer since SAP installer is not used, SAP executables in the home dir of the remote user is non-standard. Has to be setup manually.
    - Requires setting up secure shell key-based authentication, which should be known by UNIX/Linux admins or combined Basis/UNIX/Linux admins, but might be less familiar to SAP Web AS only admins.
    - If your admin config policy is to have SAP interact as little possible with the OS level for interfaces with other systems, here you are relying on the OS-level secure shell.
    - Using a private key that does not require a passphrase on the central system may not fit with your security policies if you have standards for secure shell configuration.
    SAP gateway
    + The gateway is a standard installation, performed with SAP installation tool, with the exception of a few additional environment settings that have to be added after the installation. BR*Tools are installed in the standard location. Can use standard procedures for updating this software.
    + Only uses SAP software.
    - More software on remote system: standalone gateway just to run BR*Tools and view logs.
    - SAP Kernel of remote gateway should probably be updated whenever you do SAP kernel updates across your systems for consistency. One more system to update.
    - Shell environment of remote user that runs the gateway looks like something setup by the SAP installer but is not standard because it has a few additional environment variables added.
    - Need to make sure the SAP gateway is started on the remote system.

    Hi Joe,
    I configured a monitoring/dba landscape for two SAP Portals and one SAP BusinessObjects system on a SAP landscape by using DBACOCKPIT, at a customer site. These systems are running on AIX, Windows 2003/2008 servers and attached to the central monitoring system with standalone SAP gateway installations.
    One another reason to not use OS based commands or 3rd party tools is security. We are stopping and disabling most of the services on OS where SAP system is running on, because of the security reasons. I faced more security gaps on rsh/ssh and the other tools than standalone SAP Gateway installations. As you can figure out that rsh/ssh is getting more attack than standalone SAP Gateway, because of well known by the IT world.
    As a summary of it, this depends to point of view and policy of the IT organization. I applied both ssh and standalone SAP Gateway solutions at my customers, but I choose standalone SAP Gateway installation among of them.
    Best regards,
    Orkun Gedik

  • Not able login to DBA cockpit. Dropdown to  select system  is empty

    Not able login to DBA cockpit. Dropdown to  select system  is empty.
    Version :->
    SAP IQ/16.0.0.807/140804/P/sp08.03/Enterprise Linux64 - x86_64 - 2.6.18-194.el5/64bit/2014-08-04 18:42:22
    $ sh cockpit.sh --version
    Cockpit Server 4 SP08 PL01
    Build Type         : release
    Build Timestamp    : 201405191326
    Build Number       : 5558
    Additional  information :->There is nothing to select in the drop-down menu under "System"
    Please let me know whether there is any solution/workaround to resolve this issue.

    Hi
    First of all, you need to check the hosts file on your client system.
    hosts file has to include some information such as "host/ipaddress" and so forth..
    In my case, I found out that the issue is related to OS System.
    If I installed IQ16 SP08 on window 2008 R2 (English version) or added a package of english language.
    And then I changed display language from korean to english.
    I succeeded to log in to cockpit console.
    And the cockpit related log files are helpful to investigate the root causes.
    thanks
    Gi-Sung Jang

  • Rate and accessable value is not displaying for the tax invoice output

    Hello All,
      Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
    Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
        Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
    Thanks & Regards,
    ramesh

    hi Gurpreet,
    You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
    Or providing value to it in the SQL...

  • Explain plan not available in dba studio

    Hi, guys,
    Why the explain plan not available in my dba studio with a message like this "explain plan not available for this sql statement. ora-02195: attempt to create permanent object in a temporary tablespace"
    Another question: I can use "set autotrace on" to trace sql statement in sql*plus window. But the final execution plan come up without those thing like cost, cardinality but only the steps
    Thanks for your help
    jim

    Was this a trace started on an already running task? Was the trace stopped before the task completed? Did the trace file reach its set size limit before the task compled?
    In all three cases above you would have cursors that were not closed and stats information not written to the trace file resulting in incomplete data for some SQL.
    HTH -- Mark D Powell --

Maybe you are looking for