ACCESS TO BUSINESS SYSTEM ACCESSOR FAILED

Hi,
We have recently added a new server in our SLD, So, for that I have asked the Basis team to create a new technical system, Business system ....its been created in SLD but when I try to assign(assign new business system) it in Integration Directory for my new scenrio...I cant find it and I get the following alert message :
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed.
Regards,
Lokesh

Hi,
try this note: 764176
(and you can also have a look at this one: 1117249 )
and let me know if this helped
Regards,
Michal Krawczyk

Similar Messages

Error - Internel EOA Service Buisness System accessor failed

Dears,
In our PI 7.1 system when we go to integration builder ->Communical Channel -> Buisness System ->Assign Partner
We get Error:
Access to object list of type "Buisness System" using the internel EOA Service Buisness System Accessor Failed.
Please suggest.
Shivam

Hi Shivam,
You should have two users PIDIRUSER & PIREPUSER with Roles:
SAP_XI_ID_SERV_USER
SAP_XI_MONITOR_J2EE
And User Type must be service.
Check whether the users are locked not .
And passwords for PIDIRUSER & PIREPUSER users should be same as in Local SLD & Central SLD. (if you are maintaning more than one SLD)..
Check also these service users are consistent according to note #936093 - XI 7.0: Change passwords of XI service users
Apply note #764176 Error in XI due to inconsistent SLD contents - this error could be caused by inconsistencies in the SLD.
Hope this will help you...
Regds,
Pinangshuk.

Wbadmin - access to EFI system partition fails

Sorry, but I could not change the headline in the thread were I started this issue. But error 0x807800C5 is too imprecise
https://social.technet.microsoft.com/Forums/windowsserver/en-US/79a735c1-4c50-4fa8-a945-46e25991eea9/wbadmin-failure-0x807800c5?forum=windowsbackup#47e77a02-ddb0-42dd-b33d-1475471f7bc3
So I sumarize the case:
Server 2012R2
Hypervisor with several running VM's
Up2Date 3/18/15
After weeks of succesfull backups wbadmin suddenly fails with 0x807800C5. No changes were made to the system, same backup device.
I restored a file and a VM succesfully from the backup to verify that the disk and the image is ok.
I run wbadmin from a script with:
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -allCritical -hyperv:vm1,vm2,vm3
Output is:
2015-03-18 23:02:17 INF > wbadmin 1.0 - Backup command-line tool
2015-03-18 23:02:17 INF > The backup operation to F: is starting.
2015-03-18 23:02:17 INF > Creating a shadow copy of the volumes specified for backup...
2015-03-18 23:02:17 INF > Creating a shadow copy of the volumes specified for backup...
2015-03-18 23:02:17 INF > Windows Server Backup is updating the existing backup to remove files that have
2015-03-18 23:02:17 INF > been deleted from your server since the last backup.
2015-03-18 23:02:17 INF > This might take a few minutes.
2015-03-18 23:02:17 INF > Creating a backup of volume (EFI System Partition) (100.00 MB), copied (0%).
2015-03-18 23:02:17 INF > Summary of the backup operation:
2015-03-18 23:02:17 INF > ------------------
2015-03-18 23:02:17 INF >
2015-03-18 23:02:17 INF > The backup operation stopped before completing.
2015-03-18 23:02:17 INF > The backup operation stopped before completing.
2015-03-18 23:02:17 INF > Detailed error: The specified backup disk cannot be found.
I found out that the failure only occurs if I add the -allCritical switch.
If I start the backup for drive c: with this command:
wbadmin.exe start backup -quiet -backupTarget:f:\ -include:C: -vssFull -exclude:c:\Hyper-V
everything is ok.
I can backup every virtual machine with the following command without any problem
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -hyperv:XYZ-DOM
Only this command fails:
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -allCritical
The difference is that wbadmin now tries to backup ALL partitions, also EFI & Co. So I assume that wbadmin does not have proper access to the "EFI System Partition" and that all information which one can find in the logs of the
2012 server related to that event is bullshit (Error: The specified backup disk cannot be found).
I found reports of 8.1 users rleated to similar problems (http://answers.microsoft.com/de-de/windows/forum/windows8_1-files/systemabbildsicherung-bricht-ab/f6ed5e53-829e-48be-9b47-a73f730680cc?page=1&tm=1384095732725). Could be a hint, same kernel.
But at the end: With this kind of backup you'll loose defintly the possibility of an bare-metal restore, very
unsatisfying.
Annother question: Backups with the -hyperv switch are terrible slow. The backups are written to an USB-3 disk, The xyz-Dom machine for example has two vhdx files with roundabout 700GB, more or less 350GB filled. The backup needs 12 hours!
Thank you
Klaus Deiss

Sorry, but I could not change the headline in the thread were I started this issue. But error 0x807800C5 is too imprecise
https://social.technet.microsoft.com/Forums/windowsserver/en-US/79a735c1-4c50-4fa8-a945-46e25991eea9/wbadmin-failure-0x807800c5?forum=windowsbackup#47e77a02-ddb0-42dd-b33d-1475471f7bc3
So I sumarize the case:
Server 2012R2
Hypervisor with several running VM's
Up2Date 3/18/15
After weeks of succesfull backups wbadmin suddenly fails with 0x807800C5. No changes were made to the system, same backup device.
I restored a file and a VM succesfully from the backup to verify that the disk and the image is ok.
I run wbadmin from a script with:
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -allCritical -hyperv:vm1,vm2,vm3
Output is:
2015-03-18 23:02:17 INF > wbadmin 1.0 - Backup command-line tool
2015-03-18 23:02:17 INF > The backup operation to F: is starting.
2015-03-18 23:02:17 INF > Creating a shadow copy of the volumes specified for backup...
2015-03-18 23:02:17 INF > Creating a shadow copy of the volumes specified for backup...
2015-03-18 23:02:17 INF > Windows Server Backup is updating the existing backup to remove files that have
2015-03-18 23:02:17 INF > been deleted from your server since the last backup.
2015-03-18 23:02:17 INF > This might take a few minutes.
2015-03-18 23:02:17 INF > Creating a backup of volume (EFI System Partition) (100.00 MB), copied (0%).
2015-03-18 23:02:17 INF > Summary of the backup operation:
2015-03-18 23:02:17 INF > ------------------
2015-03-18 23:02:17 INF >
2015-03-18 23:02:17 INF > The backup operation stopped before completing.
2015-03-18 23:02:17 INF > The backup operation stopped before completing.
2015-03-18 23:02:17 INF > Detailed error: The specified backup disk cannot be found.
I found out that the failure only occurs if I add the -allCritical switch.
If I start the backup for drive c: with this command:
wbadmin.exe start backup -quiet -backupTarget:f:\ -include:C: -vssFull -exclude:c:\Hyper-V
everything is ok.
I can backup every virtual machine with the following command without any problem
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -hyperv:XYZ-DOM
Only this command fails:
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -allCritical
The difference is that wbadmin now tries to backup ALL partitions, also EFI & Co. So I assume that wbadmin does not have proper access to the "EFI System Partition" and that all information which one can find in the logs of the
2012 server related to that event is bullshit (Error: The specified backup disk cannot be found).
I found reports of 8.1 users rleated to similar problems (http://answers.microsoft.com/de-de/windows/forum/windows8_1-files/systemabbildsicherung-bricht-ab/f6ed5e53-829e-48be-9b47-a73f730680cc?page=1&tm=1384095732725). Could be a hint, same kernel.
But at the end: With this kind of backup you'll loose defintly the possibility of an bare-metal restore, very
unsatisfying.
Annother question: Backups with the -hyperv switch are terrible slow. The backups are written to an USB-3 disk, The xyz-Dom machine for example has two vhdx files with roundabout 700GB, more or less 350GB filled. The backup needs 12 hours!
Thank you
Klaus Deiss

Not able to import business system in Integration Directory

Dear all,
Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
Now in the post instalaltion activites.
I have changed the exchange profile parameter
SLD connection.
And other post installation activites succesfully.
But I am not able to import the business system in Integration director. It throws an error by mentioning.
*Access to object list of type business system using the internalEOA service business system accessor failed *
Here we are maintaing a central SLD and hence i created the service users with specific roles.
SLDcheck is working fine and it dispalying the businees system as well.
I confirmed that the user and password are same in XI and SLD system,
But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
Is this the problem or am i missing out somewhere?
FYI: The users are not locked.
Kindly suggest me and it will be greatful if i get immediate reply.
Thanks and regards
Vijay kumar G

Hi Vijay,
It looks like the problem is with the SLD.
Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
Regards,
Lim...

SLD Connection IB: Can't find business systems: InternalEOAService

Dear experts,
I have connected my SLD properly to the IS. SLD_CHECK is successful. But I can not access the business systems from the integration builder. I get this message:
========================================================
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
========================================================
What's wrong. Performed J2EE restart and SXI_CHACHE refresh.
Can also not import configuration objects due to the fact that it thinks that certain business systems do not appear in the SLD. But they do....
Please suggest?!?
Kind regards.

Forget about the SLDCHECK. that is completely irrelevant here and only deals with the abap communciation.
Your issue relates to the JAVA communication with the SLD.
You need to successfully register the JAVA stack with the SLD. In the Data Supplier, does this work for every page? You are interested in the CIM Data tab...
You may have to make alot of manual associations, but until you can register the other components, there's no point.
Can you specify your version and whether or not the Template Installer was successful and whether you have checked the post installation tasks?
Also check this note: https://service.sap.com/sap/support/notes/939592

Kerberos Configuration Manager for SQL Server: Access of system information failed!

I'm trying to use the new Kerberos Configuration Manager for SQL Server tool that was released recently to verify SPN on several SQL Servers, but any time I attempt to connect to a server I get the following error in the log:
6/24/2013 3:48:22 PM Info: Connect to WMI, \\<HOSTNAME>\root\cimv2
6/24/2013 3:48:25 PM Error: Access of system information failed System.DirectoryServices.AccountManagement.PrincipalOperationException: An error (1332) occurred while enumerating the group membership. The member's SID could not be resolved.
at System.DirectoryServices.AccountManagement.SAMMembersSet.IsLocalMember(Byte[] sid)
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextLocal()
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
6/24/2013 3:48:25 PM Error: Error System.Exception: Access of system information failed!
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
at KerberosCM.SystemInfo.GetInfo()
at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)
Things I have tried to resolve this:
1. Verified that my account is a Domain Admin.
2. Attempt to connect locally without inputting any information for server/user/pw
3. Attempt to connect remotely using server/user/pw
I always receive the same error message and log: Access of system information failed!
Has anyone else run into this issue?

Update to this:
There were some invalid user accounts added to the Local Administrators group only showing up as a GUID. This caused the enumeration of the group to fail and generate the error in my original post. Removing those user accounts from the Administrators group
got past the enumeration error.
However, now when attempting to connect to the servers (locally or remotely) I get this error:
6/27/2013 10:24:24 AM Info: Connect to WMI, \root\cimv2
6/27/2013 10:24:38 AM Error: Access of system information failed System.Runtime.InteropServices.COMException (0x80070035): The network path was not found.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_AdsObject()
at System.DirectoryServices.PropertyValueCollection.PopulateList()
at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
at System.DirectoryServices.AccountManagement.SAMStoreCtx.ResolveCrossStoreRefToPrincipal(Object o)
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextForeign()
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
6/27/2013 10:24:38 AM Error: Error System.Exception: Access of system information failed!
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
at KerberosCM.SystemInfo.GetInfo()
at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Error When Assigning a Business System in ID

Hi,
I'm using PI 7.1. and when I'm trying to assign Business System from our SLD (menu path Business System --> Assign Business System). it throws me the following error:
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
What are the steps to debug this?
Thanks.
Prema Boodi

The problem is solved using below solution:
We should have USERS: PIDIRUSER & PIREPUSER
with Roles:
SAP_XI_ID_SERV_USER
SAP_XI_MONITOR_J2EE
And User Type must be service.
Also check the users are not locked.
And passwords for PIDIRUSER & PIREPUSER users should have same password in Local SLD & in Central SLD. (if you are maintaning more than one SLD)..

SAP ABAP Client proxy Errror occured when determining the Business system.

Dear Friends
I am trying to push data from ECC to PI and then MS-SQL Server. My SAP scenario is ABAP Proxy to JDBC
I have created on Enhancement Implementation for AS01 ( Asset Master creation). Here I am calling my ABAP proxy and uploading ANLA and ANLZ strucutre to my abap proxy. but I get the run time error. that suggest Error occurred while determining the Business system - SLD_API_Exception.
My all IR and ID objects are activated, I have tested the scenario successfully without error in ID,
When I check SM21 it suggest that error is due to XI is unable to access the SLD. Could_not_determine_sld_access_data.
SLDCHECK works fine in PI system.
SLDCHECK is failed in my ECCDEV 400 client System.
Is it mandatory to configure SLD access in ecc development system as well ? is this the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly.
Please look the below link it contains the enhancement code of AS01 transaction code where I am calling abap proxy to send the data. Runtime analysis report, SM21 log, and SLDCHECK failed screen shot in 400 client. SLD working fine in PI system. my SLD is configured in SOLMAN system.
You can see the error and Code from this link -> [Code , Runtime Dump Analysis report, SM21 Log and SLDCHECK|http://www.scribd.com/doc/61192432/Sap-Abap-Proxy-Error]
Please help me How can I solve this ?
Regards
Naeem

Hi Naeem,
>>>is it mandatory to configure SLD access in ecc development system as well ? is this the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly
YES...you need to configure SLD check in your ECC System also
Also check the links below for proxy connectivity step by step
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?quicklink=index&overridelayout=true
Regards,
Naveen

Problem Assigning Business Systems

Hi,
Landscape: New XI 3.0 SR1 Installation, W2K, oracle.
SLD: on a separate server with ABAP+J2ee. ABAP datastore for UME. Updated with new CIM, CR content.
Followed oss note: 768148 - Using a separate SLD for XI
We completed all the settings as per post-installation guide and XI configuration guide. We were able to connect & create the technical and business systems for XI and R.3 ECC 5.0 in the SLD.
SLDCHECK in XI server is fine, and shows the correct information about the SLD.
But when I am trying to assign a business system in Integration Directory - Service without third party, in the following wizard I am getting an error message
"Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed"
Any help would be appreciated

Hi Rao,
The following links u may find it useful.
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
http://www.sap-press.com/downloads/h982_sample_chapter.pdf
*Please Reward points if u find it useful.
regards,
gyanaraj

Error in finding business system

Hi,
I'm working on delivery scenario of AII. While creating configuration scenario, when i try to assign business system, it pops out the following error..
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
I've already created technical system and business system, still it shows this error and displays empty list of business systems. Whats wrong in this??
Regards,
PB

I've created technical system using rz70 and with that I created a business sytem in SLD. In our case both AII and XI are in netweaver2004s and we have ecc5 as backend. So AII and XI are in same system.
I've tried slcheck; but it shows following error.
RFC destination SAPSLDAPI does not exist
=> Create the RFC destination by using transaction SM59!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
RFC destination LCRSAPRFC does not exist
=> Create the RFC destination by using transaction SM59!
What could be the problem???
Regards,
PB

Integration Testing on Business system to PI 7.0

Hi,
When i try to execute sldcheck transaction, i get a error statement like this:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
<b>Function call returned exception code 4</b>
But when i checked under Business system in SLD, i am able to view the business systems available.
What could be the problem... Please help me...
Thanks & Regards,
Madhukar

Hi Madhukar,
Check if these threads can help you.
SLD server access settings
AbapSLDRequestHandler.ping(): server connection *** failed ***
SLDCHECK problem
/thread/232144 [original link is broken]
Erro while running SLDCHECK Tcode
SLDCHECK does not work.
SLDCheck is giving error
*****************Reward points if helpfull**************

Dynamically change Receiver Business system in message mapping

Dear all,
I would like to change the receiver business system in the message mapping that is used in the interface determination. I do understand there is an enhanced receiver determination where I can use a mapping but that is not what I am looking for.
I think this should be possible if we can change the appropriate value in the SOAP(message) header.
Possible candidates I can think of by looking at the SOAP header in SXMB_MONI are
1. SOAP:Header- SAP:Main- SAP:Receiver- SAP:Service
2. SOAP:Header- SAP:OutboundBinding - SAP:OutboundBindingEntry - SAP:ToServiceName
Q1. Which one of the above is relevant while identifying the receiver agreement ?
Q2. What is the best way to access them from the mapping(preferably from a UDF) ?
Thanks in advance.
Cheers
danus
PS: I have tried to set "http://sap.com/xi/XI/System","ReceiverService" in Dynamic config & ReceiverService, BusinessSystemReceiver and ReceiverSystem in the Containers Transformation Parameters, but didn't get the expected result.

Chidambaram,
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
A typical usage case is if you do not yet know the names of the receivers at configuration time. In this case, you can define a mapping program, for example, which reads a list of receivers from a table or from the payload of the message at runtime.
Go through the following link:
[Receiver Determination enhancement|http://www.****************/Tutorials/XI/RecvDetermination/Enhancement.htm]
Hope your problem gets resolved.
Regards,
Kiran Bobbala
Edited by: kiran Bobbala on May 7, 2008 5:47 PM

System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo),

Dear All,
I am getting a below error while doing ehp6 installation on sybase (high availbility )
can any one help me on this..?
An error occurred while processing option SAP Business Suite 7i 2011 > Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > SAP ASE > High-Availability System > Database Instance( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo), line (646) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1059: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbprocess.cpp: 423: CIaOsProcess::start_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 238: CSyChildApplicationImpl::start(false) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 262: CSyChildApplicationImpl::doStart() .). You can no
Regards,
Letz..

Hello Mauricio.
Thanks
Two Thinks:
1.- This error appears precisely in the process of creating SAP users including you mention sidadm:
      A.- Execute sapinst
      B.- Installation option is chosen
            SAP NetWeaver CE Production Edition
                    Installation Options
                        High-Availability System
                              Central Service Instance (SCS)
       c.- System ID, Next and appear message error
2.- However, the user manually create sidadm, I gave the permissions you indicate, and the error message is the same
Thanks

ACCESS TO BUSINESS SYSTEM ACCESSOR FAILED

Similar Messages

Maybe you are looking for