Error When Assigning a Business System in ID

Hi,
I'm using PI 7.1. and when I'm trying to assign Business System from our SLD (menu path Business System --> Assign Business System). it throws me the following error:
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
What are the steps to debug this?
Thanks.
Prema Boodi

The problem is solved using below solution:
We should have USERS: PIDIRUSER & PIREPUSER
with Roles:
SAP_XI_ID_SERV_USER
SAP_XI_MONITOR_J2EE
And User Type must be service.
Also check the users are not locked.
And passwords for PIDIRUSER & PIREPUSER users should have same password in Local SLD & in Central SLD. (if you are maintaning more than one SLD)..

Similar Messages

Error occurred when determining the business system (NO_BUSINESS_SYSTEM)

Hi ,
I am working on a POC(ECC 6.0(proxy)>PI 7.1>(proxy)ECC 6.0).
I have created
1) IR objects.
2)Proxy generation & report program to fill the proxy structure.
3)ID objects. (reciever CC, RA, ID, RD)
I am getting below short dump on Sender ECC side,
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_AI_SYSTEM_FAULT', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
Error (id=GET_BUSINESS_SYSTEM_ERROR): An error occurred when determining the
business system (NO_BUSINESS_SYSTEM)
pls let me know, what might be wrong.
santosh.

Hello,
You may need to create your business system and point it to the Integration Server on SLD.
Generally it acuses an error on tcode SDLCHECK, for this please check note #1143810.
Regards,
Caio Cagnani

Problem in Assigning the Business System

Hi,
I have problem in Assigning the Business System at Configuration when I am trying to configure the Communication Channel. I had created two Software Components and also Two Technical Systems (Third Party) and Business System and I imported the SWC into repository and done with the design and now I am not able to Configure, can anyone help me out as this is very urgent.
Thanks in advance
Andy

Hi Andy,
Check if you have created you business system according to the steps given here, maybe you missed out on something.
Configuring a Business System
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/content.htm
Defining a Business System as a Service
http://help.sap.com/saphelp_nw04/helpdata/en/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Chandra

Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER

Hi All,
We are getting the following error when activating an ODS:
Fiscal year variant not expected
Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER
Interestingly, we have two systems for two different phases, on the same BW 3.5 SP level and the corresponding source R/3 SP Levels. BEx reporting is turned on for both the ODSs.
On one system, the ODS get's activated without any issue and on the other, it get's errored out.
I have tried different things like Rebuiding Global Transfer Settings, comparing the data between the two systems, etc., but no use.
Any ideas/solutions?
Thanks,
- Shashi

Marc,
I have checked once and found all the data is correct. I will do that again.
When I tried RSRV checks on 0FISCPER and 0FISCVARNT, I am getting the following message:
0FISCVARNT is not a characteristic but an InfoObject of type TIM
Message no. RSRV209
Diagnosis
The value entered 0FISCVARNT must be the name of a characteristic. However, 0FISCVARNT is an InfoObject of type TIM.
The following values can be types:
CHA characteristic
KYF key figure
TIM time characteristic
UNI unit
DPA package
ATR attribute
MTA meta-InfoObject
Thanks,
- Shashi

Assign new Business System in ID

Hello,
i need using a new business system because my interface can be executing in two clients.
i have a new business system in SLD with a technical system (three party) exits.
however, in ID, when i go to assign this business system, it don't appear in window and i can't select
why?
thank very much

Hi,
In ID, go to Environment --> Clear SLD Cache and say OK.
Now again try assigning the business system, it should be there.
Regards,
Supriya.
Edited by: Supriya Sawant on Oct 15, 2009 7:08 PM

Error when assigning SID while uploading text in the info-object of the DSO

Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.

Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

Error when posting IDoc *** in system ERP100

Hi Experts!
Can you pls help me with a goods receipt issue?
When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
The same msg is getting displayed in RZ20.
On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
What can be the reason for this problem please?
What is in general the way to analyse and solve this kind of issue?
Thanks a lot !!
imre

Hi,
First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of BBP_DOCUMENT_TAB.
Hope this helps.
Regards,
Kalyan

Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE

Hi Experts
When I am trying to load the data into DSO the data is scheduling But DSO data is not Activated It Showing Error
messages in Log for request processing in Request tab of DSO Manage.
1.Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE
2.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
3.Error when assigning SID: Action VAL_SID_CONVERT table ZCH_O_TYP
4.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
5.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE
6.Value '0000000000000000860452655_PDF_45U x 200' (hex. '30303030303030303030303030303030383630343532363535') of
characteristic ZVALUE contains invalid characters
7.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE_O .
8.Value '224053 sht 1.pdf##~##000000153363' (hex. '3232343035332073687420312E70646623237E232330303030') of
characteristic ZVALUE_O contains invalid characters.
9.Activation of M records from DataStore object ZCF_O02 terminated
I have tried adding the special character # with transaction rskc but nothing seems to change and
I still get the same error.
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
i am getting the above error, one of the expert suggested to implement this code but i am getting some errros when i execute this one please can anyone check this code and correct the errors it would be help ful to me.
Regards
Venu

Hi ,
Implement this code to resolve the issue.
You can use the sample code below to choose only the charachters to be allowed in for the field. Using that you can remove all special charachters and # symbols as required
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
Regards,
Rahul.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT

Hello Team,
WE are facing the error"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT" .Please see he below screen shot.
Every day the failure is for a different value and this is fixed with the manual activation of he DSO, with out any change .
Below are the steps we have tried:
1. The RSRV tests for the info objects were consistant. We have done he below rsrv tests:
a. Compare characterstic of P/Q table with X/Y tables.
b.SID values in X and Y tables.
2. We have changed the DSO setting from Parallel to Serialized Activation.
Also the format of the values are as per the designated type.
One more thing which i noticed is , the values for which the failure occurs , are new entries to the DSO, and they do no exists in the Change log table.
Please let us know , what else can be done to fix this issue.
Thanks in Advance,
Nikhil

HI Nikhil,
please go through the documents.
http://scn.sap.com/thread/1820047
http://scn.sap.com/message/14266151
http://scn.sap.com/thread/1520825
Regards,
Abdul rAwoof Syed.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER

Dear experts,
I'm getting this error when activating an DSO.
I'll try to explain when this error happens.
I have a DTP in Delta Mode between 2 DSO's.
The first time I run the DTP the DSO activates with no problems.
The next time I run the DTP and it gets data the activation of the DSO has the error: Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER
I've googled it but I can't find a solution for this.
The first time I got this error I've deleted the DSO anda loaded the Data again and got no errors.
The next Delta that has Data gave error when activating the DSO.
Whan can be happening here?
Best Regards,
Rui Romba

So you want to say that data loaded successfully in DSO 1 and while activating data in DSO2 you are getting this error.
DSO1 feed data to DSO2 correct.
Please check if generate SID upon activation setting is checked in DSO1 or not.Because if its the issue with fiscal year period then it should have given the error at DSO1 itself provided that setting is maintained.
I just stumbled upon a document which addresses this issue and it seems the problem is with fiscal year variant.
Check out the document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a5a670-13f6-2c10-179d-a35e50a208bf?quicklink=index&…
Regards,
AL
Message was edited by: Anshu Lilhori

Activating DSO: Error when assigning SID

Hi,
I am loading data from r/3 to BW via PSA till PSA the data gets populated correctly with out any errors, But from PSA to ODS I get the below Errors Can some one help me
Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT table ZPOD_DATE RSDRO
Error when assigning SID: Action VAL_SID_CONVERT table ZPO_DATE RSDRO
Activation of M records from Data Store object ZSD_O05 terminated RSM1102
Process 000106 returned with errors     RSODSO_PROCESSING     6
Process 000122 returned with errors     RSODSO_PROCESSING     6
Thanks
Abhi

Hi
Thanks fro your immediate response
But in the Error message Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces" I dont have 0DATE field in my ODS to check
Thanks
Abhi

While uploading the flat file getting Error when assigning SID

Hi ,
while uploading flat file i getting thid error .
Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER and No SID found for value '0 ' of characteristic 0CURRENCY

Hi Bijender,
This is related due to missing values in your currency tables.
If you are maintaining the currency tables from R/3 - Replicate the Currency Rates(Source sytem- Transfer Exchange Rates).
& check if the missing value is available in the TCURR table.
Thanks,
ChandraDeepak

Error when assigning business partners to positions in org. mgmt.

Hello,
I've got the following problem. I want to assign business partners to a position in organisation management. When doing this, the following error occurs:
"Object cannot be assigned to object xxx in the period xx.xx.xxxx - xx.xx.xxxx"
(xxx is the position to which the business partner should be assigned)
The number of this error message is 5A368.
Diagnosis in the detailed description of this message:
"The object period of object '1st Level Support' is not within the relationship period 26.03.2007 - 31.12.9999."
I've changed the object period of the position "1st Level Support" to several other dates, but it did not solve the problem.
The described problem does not occur, when assigning an user to this position.
Can anybody help me with this problem? I'm using SolMan 4.0.
Thank you in advance!

Thanks for your answer so far. Unfortunately it's not possible for me to upgrade to SP11. So I tried to solve the problem the way you described. I double-clicked the position on the left, the desired position is shown in the main screen and I try to assign the business partner to the position. But the same error appears.
Are there any other possible solutions?
What are the consequences of assigning users to a position instead of business partners?

Error when assigning a BP in ppoma_crm

Hi all-
When I try to assign a Business Partner, rather than a user, to a position in the org model in ppoma_crm, I recieve this error message:
Message no. 5A719 - Caution: system could not perform all data changes
Has anyone worked through this message?
Thanks,
Nathan

Hi Raguraman
Even I have the same problem the long text is as follows
Caution: system could not perform all data changes
Message no. 5A719
Diagnosis
The required data changes consist of two parts:
1. Scheduling existing relationships
2. Creating a new relatonship
The existing releationship(s) was/were successfully scheduled, but the system could not create the new relationship.
Procedure
You can take back the data changes you made, using the undo function.
Regards
Charan

SAP ABAP Client proxy Errror occured when determining the Business system.

Dear Friends
I am trying to push data from ECC to PI and then MS-SQL Server. My SAP scenario is ABAP Proxy to JDBC
I have created on Enhancement Implementation for AS01 ( Asset Master creation). Here I am calling my ABAP proxy and uploading ANLA and ANLZ strucutre to my abap proxy. but I get the run time error. that suggest Error occurred while determining the Business system - SLD_API_Exception.
My all IR and ID objects are activated, I have tested the scenario successfully without error in ID,
When I check SM21 it suggest that error is due to XI is unable to access the SLD. Could_not_determine_sld_access_data.
SLDCHECK works fine in PI system.
SLDCHECK is failed in my ECCDEV 400 client System.
Is it mandatory to configure SLD access in ecc development system as well ? is this the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly.
Please look the below link it contains the enhancement code of AS01 transaction code where I am calling abap proxy to send the data. Runtime analysis report, SM21 log, and SLDCHECK failed screen shot in 400 client. SLD working fine in PI system. my SLD is configured in SOLMAN system.
You can see the error and Code from this link -> [Code , Runtime Dump Analysis report, SM21 Log and SLDCHECK|http://www.scribd.com/doc/61192432/Sap-Abap-Proxy-Error]
Please help me How can I solve this ?
Regards
Naeem

Hi Naeem,
>>>is it mandatory to configure SLD access in ecc development system as well ? is this the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly
YES...you need to configure SLD check in your ECC System also
Also check the links below for proxy connectivity step by step
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?quicklink=index&overridelayout=true
Regards,
Naveen

Error When Assigning a Business System in ID

Similar Messages

Maybe you are looking for