Accessability/Universal Access - Zoom does not work in Launchpad/Mission control

If using the Accessability 'Zoom' option it works normally in 'normal' desktop Spaces.
On entering either LaunchPad or Mission Control it is not possible to zoom in or, more importantly, zoom back out to full screen.
It is also not possible to move the zoomed area around the full desktop.
These issues make LaunchPad and Mission Control unusable if entered with any amount of Zoom enabled.
The workaround appears to be to leave LaunchPad or Mission Control, Zoom fully out and go back in again.
This is not helpful if you need the zoom mode in order to be able to see your computer screen.
Anyone found a better workaround?

Phoned AppleCare tonight - the fix was to nuke the System Preferences preference file and reboot.
The good news - 'Zoom' now works with the keyboard shortcuts.
The bad news - the trackpad 'zoom' gesture from Snow Leopard doesn't work in Lion.

Similar Messages

  • Access to Outlook Anywhere does not work

    Good evening,
    I recently installed an Exchange Server 2013 CAS / MB.
    Until now, the server presented a few errors (mainly in the
    event log) that does not seem to significantly influence functionality.
    This week I published the server on the Internet and verified various malfunctions
    related to the access from outside.
    In particular from outside:
    1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
    2 - Outlook Anywhere does not work from internet.
    I've done a lot of research and testing without success.
    With regard to the first issue (which is not a priority but can relate to second one)
    add that in Firefox I get a first authentication request. If
    I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
    I assume that the first is the integrated Windows application and the second is basic authentication.
    Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
    The problem is
    priority 2:
    Outlook connects without problems on LAN network, the Internet
    seems to download the correct information
    (autodiscover), but then does not connect
    to the server (connection to Microsoft Exchange is unavailable).
    If you manually edit the settings,
    auto-configuration server returns as
    a [email protected]. If I change
    manually the server (and proxy settings
    http), the result does not change.
    - Setting information -
    The server is installed
    in the LAN network and is exposed on the Internet through
    a firewall (Pat on port 443, et al. not 80)
    on a public address.
    The public and private DNS have been configured with a
    host record (A) and two
    CNAME (webmail and autodiscover).
    The internal Outlook clients connect
    with autodiscover and HTTPS /
    NTLM / SSL (Outlook connectivity
    status).
    IMAP, SMTP, POP, ActiveSync function.
    Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
    port 443 and try port 80, SPF isn't configured).
    The navigation to the url
    https://proxyexternalURL/rpc/rpcproxy.dll  has the same behaviour like problem 1.
    Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
    Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
    - MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
    Ask for further information.
    - Cmdlet and Autodiscover output -
    Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
    Name                               : Rpc (Default Web site)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    SSLOffloading                      : True
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    ExternalHostname                   : webmail.name_domain.test
    InternalHostname                   : webmail.name_domain.test
    Get-OutlookProvider | ft -autosize
    Name     Server CertPrincipalName                      TTL
    EXCH            msstd:webmail.name_domain.test         1  
    EXPR             msstd:webmail.name_domain.test         1  
    WEB                                              
         1  
    Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
    Name                          : Autodiscover (Default Web site)
    InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    LiveIdNegotiateAuthentication : False
    WSSecu.testyAuthentication      : True
    LiveIdBasicAuthentication     : False
    BasicAuthentication           : True
    DigestAuthentication          : False
    WindowsAuthentication         : False
    OAuthAuthentication           : True
    AdfsAuthentication            : False
    InternalUrl                   :
    ExternalUrl                   :
    Get-MapiVirtualDirectory | fl name,*auth*,*url*
    Name                          : mapi (Default Web site)
    IISAuthenticationMethods      : {Basic, Ntlm, Negotiate}
    InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    InternalUrl                   : https://webmail.name_domain.test/mapi
    ExternalUrl                   : https://webmail.name_domain.test/mapi
    Autodiscover.xml
    <?xml version="1.0" encoding="utf-8"?>
    <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
      <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
        <User>
          <DisplayName>user</DisplayName>
          <LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
          <AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
          <DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
        </User>
        <Account>
          <AccountType>email</AccountType>
          <Action>settings</Action>
          <MicrosoftOnline>False</MicrosoftOnline>
          <Protocol>
            <Type>EXCH</Type>
            <Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
            <ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
            <ServerVersion>73C082C8</ServerVersion>
            <MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
            <PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
            <AD>DC2.name_domain.test</AD>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>off</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXPR</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>on</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
            <EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
            <GroupingInformation>LAN</GroupingInformation>
          </Protocol>
          <Protocol>
            <Type>WEB</Type>
            <Internal>
              <OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXCH</Type>
                <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
              </Protocol>
            </Internal>
            <External>
              <OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXPR</Type>
                <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
              </Protocol>
            </External>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Ntlm</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
        </Account>
      </Response>
    </Autodiscover>
    Get-OwaVirtualDirectory | fl name,*auth*,*url*
    Name                          : owa (Default Web Site)
    ClientAuthCleanupLevel        : High
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Basic}
    Url                           : {}
    SetPhotoURL                   :
    Exchange2003Url               :
    FailbackUrl                   :
    InternalUrl                   : https://webmail.name_domain.test/
    ExternalUrl                   : https://webmail.name_domain.test/

    Follow the results of the test
    Outlook Anywhere (RPC over HTTP).
    Has been used an account for which
    outlook anywhere works. The account
    for which the outlook anywhere does not work is
    an administrative account and therefore
    can not be used in the test.
    Autodiscovery returns the
    same result for both mailbox.
    I'm testing RPC/HTTP connectivity.
    Testing RPC over HTTP has not been exceeded.
    Test steps
    Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
    Test the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to contact the Autodiscover service with each method available.
    I was not able to contact the Autodiscover service with no method.
    Test steps
    I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.www
    I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
    L = city, S = state, C = test.
    I am validating the certificate name.
    I could not validate the certificate name.
    More info about this issue and how to resove it
    The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
    I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Other details
    Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
    I am validating the certificate name.
    I validated the certificate name.
    Other details
    I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
    Elapsed time: 1 ms.
    I am validating the reliability of certificates.
    I was not able to validate the reliability of the certificate.
    Test steps
    Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
    I failed to build a certificate chain for the certificate.
    Other details
    Failed to generate the certificate chain.
    May be missing the required intermediate certificates.
    I'm trying to contact the Autodiscover service using the HTTP redirect method.
    I was not able to contact the Autodiscover service using the HTTP redirect method.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
    The specified port is blocked, is not listening or doesn't produce the expected response.
    More info about this issue and how to resove it
    I encountered a network error while communicating with the remote host.
    I'm trying to
    find the
    SRV DNS record _audiscover._tcp.domain_name.test.
    I failed to find
    the SRV record of the
    Autodiscover service
    in DNS.
    Some clarifications:
    1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
    are two static public addresses
    of which only the latter exposes Exchange services;
    2 - The certificate
    *. Domain_name.test is not related
    to Exchange services;
    3 -I imported the certificate
    of the issuing CA on the standalone test PC to validate the certificate.
    3- The port 80 is not open and are not published SRV records.
    Best regards.

  • My video zoom does not work on my iphone or ipad after IOS 7.0.2 update.

    After updating iPad and iPhone 4S to IOS7.0.2 the video zoom function does not work. I have also lost the function to zoom on video playback.  

    Is somebody from Apple monitoring these forums? I do have the same problem, i just recently noticed that the zoom in my video camera is no longer available since I upgraded my 4S iPhone to the newest version.

  • Alt scroll to zoom does not work in Acrobat anymore, why?

    I used this feature all the time before but it does not work anymore. Why?
    I have Mac OSX 10.10 Yosemite and use a Logitech mouse. Lates versions of all CC-apps.

    Still having this issue after an update...
    I review a lot of architectural drawings, which requires a lot zooming in/out to see details... Up until this last Acrobat Pro (11) update I was able to press option (Mac) and use the scroll wheel to zoom in and out... That convenient feature is now missing... I jacked around with several preferences and Page Display settings with no luck... I am hoping there is a checkbox hidden somewhere that I need to click on... Any clues????
    Thanks...

  • Problem with my iPod touch: Frozen screen, unable to access anything as slider does not work, will not accept a full restore.  Apple Store advised that it is a 'hardware' problem and I could trade-in!

    I am a relatively 'new' user.  Touch was a gift, I used it in a simplistic way - listened to music took a few photos, added a few calendar events.  After a year I then decided to be more proactive and found a few free apps (Solitaire) - then had a the frozen screen problem which I though was connected to low battery, but it wasn't.  I recharged it, still could not access, then tried a full restore and got an error message.  Took it to a Genius Bar and was told it was a hardware problem and as it is out of warranty  I could trade in or just buy a different product.  As this is my first Apple product is this usual?  Do Apple products have a very short shelf life - I anticipated that it would last me longer than a year!  Has anyone else had this problem?  Was it able to be resolved? Or is it worth trying to get it repaired - and if so who can do it - Apple  Store did not offer that to me as an option?

    Sure sounds like a hardware problem. It happens some times. The iPod is just an electrical device.
    Apple will exchange it for a refurbished one for this price. Apple does not repair your iPod.
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less expensive. Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Access Restriction on EA3500 does not work.

    I tested this with my laptop by setting its access restriction/parental control to always not access the internet. But still my laptop can still search through wikipedia. Is this because of the router firmware? By the way I'm using the latest Connect cloud firmware. Thanks in advance.

    I believe parental control is not really busted, it's just designed to work only with ipv4. What you can try though is to try the following:
    Make sure that the laptop is only wirelessly connected to the router, because if the laptop was connected both wired and wireless then parental controls will not work since the laptop will be using two adapters.
    Remove the entry under target devices, disable parental controls and save the settings.
    Enable parental controls, add a target device, save the settings
    Try to check if you can access wikipedia or other website because if parental control was working then it should add for a password
    Try also to check the router's status tab if there's an ipv6 ip address because if there is, then parental controls will not work

  • Automatic Zoom Does Not Work

    I have an answers report (dashboard) in obiee 11g with a map, when i do drill down over the map or over the data the map always stay static, in other dashboard
    that uses other map tile layer it works doing zoom automatically to the area selectionated. Could you say me what is wrong or what i must verify??
    Thanks a lot.

    You're Welcome Stephanie!
    If Software Update does not report that newer versions are available, then your iTunes & QuickTime software, are as far as they came be updated for your OS.
    Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
    The point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.8 (Pending), can be downloaded for free.
    Tiger is available for purchase at The Apple Store (U.S.).
    Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
    If you know what to look for, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some additional online Apple retailers, Amazon, eBay, FastMac, etc.
    Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
    Panther is only on CDs, not DVDs.
    The discs should look like the images in the above links.
    Additional info in these links.
    Using OS X Install CDs/DVDs On Multiple Macs
    Software Update, Upgrade: What's The Difference?
    Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
    If your Mac meets the System Requirements for Tiger, you could also consider installing that.
    And then use the PPC 10.4.8 Combo Update, to upgrade to the current version.
    Panther System Requirements
    Additional Panther System Requirements
    Tiger System Requirements
    Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
    Download the Media Exchange Program Order From Here.
    Orders must be mailed by March 19, 2007.
    AppleRescue, also sells a Tiger installation set on CD
    Shop Carefully, Examine All Documentation, And Good Luck!
    ali b

  • ExternalInterface in C# form does not work with debug ActiveX control

    Hello,
    I have a C# form that is a container for the Flash ActiveX
    control. Everything works find as far as communication between the
    two (container and Actionscript) if I use the release version of
    the ActiveX control. If I use the debug version, the container does
    not receive call events. Obviously I need to be able to debug both
    the C# and actionscript code simultaneously. I have searched this
    forum (and others) for any insight, but nothing glares out at me.
    Could this possibly be a security issue?
    Brad

    I thing I have a solution for you. I created a note on it end of November (unfortunately, our systems have not replicated it to the outside yet). Here is the content of the note:
    Symptom
    Using Visual Studio .NET, database logon code is not recognized.
    Crystal reports Viewer database logon parameter screen prompts for login.
    This symptom is only observed when using Crystal Reports 2008 Service Pack 2.
    Crystal Reports 2008 with Service Pack 1 works as expected.
    Reproducing the Issue
    Use Crystal Reports 2008 SP2 to create a report with dynamic parameter(s)
    Use the following code from the Crystal Reports SDK for VS .NET
    Dim crDatabase As Database
    Dim crTables As TablesDim crTable As Table
    Dim crTableLogOnInfo As TableLogOnInfo
    Dim crConnectionInfo As ConnectionInfo
    crReportDocument.Load("<path>")
    crReportDocument.Refresh()
    crConnectionInfo = New ConnectionInfo()
    With crConnectionInfo
    .ServerName = "<New Server Name>"
    .Password = "<password>"
    End With
    crDatabase = crReportDocument,Database
    crTables = crDatabase.Tables
    For Each crTable In crTables
    crTableLogOnInfo = crTable.LogOnInfo
    crTableLogOnInfo.ConnectionInfo = crConnectionInfo
    crTable.ApplyLogOnInfo(crTableLogOnInfo)
    Next
    CrystalReportViewer1.ReportSource = crReportDocument
    The above code works with Crystal Reports 2008 SP 1
    Resolution
    Add .DataSourceConnections(0).SetConnection to the code as follows:
    For Each crTable In crTables
    crTableLogOnInfo = crTable.LogOnInfo
    crTableLogOnInfo.ConnectionInfo = crConnectionInfo
    crTable.ApplyLogOnInfo(crTableLogOnInfo)
    Next
    ''This is the line of code to be added ****
    crReportDocument.DataSourceConnections(0).SetConnection("Sever Name", "Database Name", "Use ID", "Password")
    CrystalReportViewer1.ReportSource = crReportDocument
    The issue has been submitted for a resolution.
    Tracking number is ADAPT01333806.

  • How do you get out of guided access if the password does not work

    HOw do i access my phone, if the guided access is on but i dont remember the password?

    Hey BeastStitch,
    You can end a Guided Access session by triple clicking the home button on your iPhone. See this article for reference -
    iOS: About Guided Access - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • MBA 11 (2013) pinch zoom does not work after some time, how to fix it ?

    Recently I purchased MBA 11 (2013) model ( 4GB ram & 1.3 Ghz dual core). Although I use iPhone 5 & iPad 4 but never used mac. So when I found the track pad is capable of pinch zoom(along with other gesture) I was excited. But later I found after opening few apps (like safari, chrome etc) pinch zoom stop working . I need to restart in order to make it work again. Other gestures works fine just issue with the pinch zoom. Along with this issue I have some other questions as well
    1) How to fix this pinch zoom issue?
    2) I use eclipse for android development, but when I connect android phone/tablet - os crashes, no idea why?
    3) How to uninstall & update apps properly which was downloaded from web (like I installed x-code) ?
    4) I want to use mouse (i am comfortable) - I need to know whether right click, wheel, ling click & drag works perfectly.
    5) How to back up the os if something goes wrong I can retrieve from there ?

    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    http://support.apple.com/kb/TS3694#error6

  • Pinch to zoom does not work. Firefox 15.0.1, Mac OS 10.7.4, how do I enable this?

    How do I enable pinch to zoom? I don't want to type in code in about:config. If there is not a setting I can change, I'll go back to Safari.

    Hi Junebugapril
    try in [http://kb.mozillazine.org/About:config about:config]
    <pre>browser.gesture.pinch.in
    ''value'' cmd_fullZoomReduce
    browser.gesture.pinch.in.shift
    ''value '' cmd_fullZoomReset
    browser.gesture.pinch.out
    ''value'' cmd_fullZoomEnlarge
    browser.gesture.pinch.out.shift
    ''value'' cmd_fullZoomReset
    </pre>
    ''String'' all the above
    thank you

  • My zoom does not work in safari

    somehow I cant use my mouse to zoom anymore...??? What have I done?

    I guess I should say Trackpad... I just check my prefs again and it looks like they are selected for the "pinch" zoom...
    I saw in another thread that this is an issue after a computer has gone to sleep and will be fine after a reboot... does that sound right to anyone?

  • Pinch & zoom gestures not working in Safari

    Help!  Since updating iPhone 4 to iOs 5.1, "pinch &amp; zoom" gestures do not zoom in on page in Safari.  Can anyone help with this?

    On Lion 10.7.2, iMac, pinch to zoom does not work at all in any application.  It is selected in Preferences.  Apple Genius & tech on the phone could offer nothing, no reason why, & no fix .  Better Touch Tool does not offer a pinch to zoom, so that didn't help.
    Among my friends, some say it works, some say it does not, about half & half. 
    APPLE!  Please give us a fix for this!

  • Icloud control panel sync to chrome does not work

    Bookmark sync does not work.
    - Installed icloud control 3.0.
    - installed extension for Chrome "iCloud Bookmarks"
    I get the message "icloud Bookmarks extension for Chrome is required". Keep pressing the button enable but nothing happens.
    Please help !

    This helped to know it is one-way and that is why my IPad got nuked.  Is there any software you are aware of that can download or transfer photo albums, not camera rolls or those taken by iphone, toa disc?  there are apps on itunes that I tr5ied but only worked on camera rolls or phtos take with iphone.  I have over 1,000 photos and do not want to make 1,000 emails of redueced size photos that loses original jpg date and data.

  • I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

    I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

    Ditto. Guest accounts shouldn't have a password. No way to enter one in System Prefs...

Maybe you are looking for