Accessibility mode

Hi, my son has enabled accessibility mode accidentally
The only thing the phone will now allow is swiping, how can i turn this mode off?
(I cant tap the screen to enter the settings menu to do it manually)
Thanks

After much hair pulling I discovered that you must triple tap when in accessibility mode
Still wasnt able to scroll when in settings menu but was able to use the search function to get to accessibility and then disable from there
Problem solved

Similar Messages

How to create a calendar activity in accessibility mode ?

I didn't find any way to create a calendar activity in accessibility mode. Since it shows blank list of days in calendar component for a month.
It seems to be a bug in ADF calendar component. Please suggest if there is any alternate way to support this.
Thank you so much.

Timo,
From a reference doc of previous version of jdev/adf, it said :
http://www.oracle.com/technetwork/cn/java/calendar-091799.html
Expand the Data Controls accordion and drag the collection that represents the view object for the activity created above (FodCalEventVO) and drop it as a Calendar.
But in Jdev 12c.--cannot find the Create Calendar choice.
In jdev 12c can drag and drop a calendar component from the component palette, but do not now how to bind it to view objects.
Thanks.
BAO

Using TImed Access mode on Airport Extreme with other routers in bridge mode. Not working as expected.

I am trying to setup timed access mode on my airport extreme in order to limit the times devices can connect to my network, but I am having some trouble.
My setup is as follows Cable Modem ---> Airport Extreme ---> Netgear router
The Airport is running DHCP and the Netgear is in bridge mode. The only purpose of the Netgear is to provide a wireless access point for older b/g wifi devices. The Netgear is connected to the Airport by an ethernet cable from one of its LAN ports. All ip addresses are supplied by the Airport.
When I list a device mac number in the Airport extreme's timed access table it does seem to block the device if the device trys to connect to the airport's wireless service, but the device is still able to obtain service through the Netgear wireless service. I want the device to be blocked on both wireless networks. I thought this would work since all DHCP is on the airport. Why is the Airport allowing the device to connect when it comes in through the Netgear?
In this example the device I am trying to block is 5c:59:48:ba:28:d2.
Looking at the log on the airport I see the following entry when the device (when permitted) connects to the airport wireless
Nov 30 22:43:12
Severity:5
Associated with station 5c:59:48:ba:28:d2
If instead the device connects to the Netgear wireless I see the following log entry on the airport (this connection gets through even if the mac address above is listed as blocked on the airport)
Dec 01 10:46:29
Severity:5
Connection accepted from [fe80::223:12ff:fe29:acfe%bridge0]:54774.
It appears that the Netgear router (while bridging the network) is somehow modifying the mac address format in a way that the airport does not recognise it as the device to block.
What can I do to fix this?
Thanks.

The Netgear wireless server has control over what what devices are allowed to connect.
Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
But, even this was not the case until the last year or so when Apple updated firmware. A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
Bottom line, you need to setup the equivalent of Timed Access on the Netgear router.

How to change Access Mode of HANA Stored procedure

Hi,
When you are creating a stored procedure as design time object, one of the option is access mode (either read only or read/write).
I understand read only is default setting in HANA DB, and unless you explicitly change the setting you cannot read/write using stored procedure.
My question is, is there way to change this setting, so I have option to choose either read or read/write when I create a stored proc?
Thank you.
Hyun

Hi Hyun,
Please have a look on this thread:
Create local temporary table in procedure
You have to enable sqlscript_mode to UNSECURE as mentioned by lars.
Then depending on whether you are specifiying "READS SQL DATA" it will act as a READ procedure else as a WRITE procedure.
Regards,
Krishna Tangudu

My external hard drive goes in to constant access mode and really slows down my computer

I'm using an external hard drive for time machine. After working for an hour or so the drive goes into a constant access mode and realy slows down my IMac. I look at activity monitor and everything looks good, no high CPU usage or memory issues. The only fix is to use the power button to shut down my IMac. After restart it works fine for a while.
If I turn off time machine the problem seems to not happen. I tried disk utility on the external hard drive and it says the dirve is fine. I change out external drives and the problem still occures. Any thoughts?

I didn't realize my profile stated otherwise.
Please check near the bottom of your original post above to see OS X (10.7.2). You might want to update that to avoid confusion and save some time in the future.
OK, please take a deep breath.
Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme....likely because it is not reliable. You might want to review this Apple Support document to confirm:
http://support.apple.com/kb/HT2038
So, we are not going to be able to provide you with much assistance on that issue.
Some users seem to be able to make this work....some have some problems....and some (like me) who have tried this have nothing but problems.
Sorry, I can't help on this one, but maybe another user who has had better luck will post to provide his secrets.
The iTunes and iPhoto libraries and files are my only copies now. I moved everything from my Macbook to the external then deleted the originals.
Not sure if you have thought about this.
If you deleted the "originals", then your only copy of your data is on one hard drive. You have no backups if the drive has a problem.
A minimum backup plan would be to have a copy of important data on two different drives. When....not if...one drive fails, you have the data on the "other" drive.
You have no "other" drive according to the information that you have provided.
Further.....Time Machine backs up the changes on your Mac. At some point....you cannot know when.....Time Machine will pick up the change on your Mac and delete the iTunes and iPhoto data from your Time Machine backups.
The files might stay there a few months, or even longer. But, I have seen instances where the files were deleted within a week or two.
So my advice would be to only delete data from your Mac that you can afford to lose.

Accessibility-mode set to inaccessible and 508 compliance

Hi,
I'm using JDEV 10.1.3.3.0.
I've set accessibility-mode to inaccessible in adf-faces-config.xml in order to set the InitialFocusID on some of my pages. Does this setting mean that my application is not/cannot be 508 compliant?
Is there a way to use the InitialFocusID (or other way to position the cursor) and use ADF Faces automatic 508 compliance code?
TIA,
Dave

Hi,
ensure you use the correct version of JAWS. In the past I've seen things like this caused by the JAWS reader. If the problem still shows and you have a support contract, provide a test case and file a bug
My problem is when i use tab key from keyboard to navigate on the page the component highlights(dotted line around the component ) but it does not open the required popup.
This is because there is no setting in your page code that says that the popup should show when the component is in focus.
+<af:showPopupBehaviour popupId="alertPopup" triggerType="mouseOver" align="startbefore"/>+
+<af:showPopupBehaviour popupId="alertPopup" triggerType="contextMenu" align="startbefore"/>+
Frank

Accessibility mode FAIL

I want to love BB 10 OS & my Z10. I am proud to put my phone on the table with all the iPhone fanboys and let them know they are slavish drones! But I stumbled into a major design flaw today and I want to nuke my Z10!
Maybe I'm just nervous, but I must have pressed the Lock button 3 times. Like Dorothy in the Wizard of Oz clicking her heals. The next thing I know the phone is talking to me. Thus ensues 2 hrs of maximum frustration There is ABSOLUTELY NO SCREEN SUPPORT that tells me I'm in Accessibilty mode. A simple message: "Press Lock 3 Times to Exit Accissibility Mode" would have helped immensely.
The operation of the phone becomes100% inscrutible. I later learn that this mode is for the visually impaired. I would like to know what testing was done with people who needed this 'feature?' Close your eyes and tell me it helps! It only stumbles, stammers, fails to respond! I later learned with a call to the ever-helpful T-Mobile support people that a three finger swipe at precise angles, velocity and incredible accuracy has a PRAYER or reversing this mode. OMG! I was going to drive to a T-Mobile store or the hospital emergency room after the hara-kiri I was sure would be more humane than this devil spawn of a BETA FEATURE!!
PLEASE: make the triple lock press a DEFAULT OFF function for accessibility. If you are visually impared it would be a purposeful selection that would require assistance anyway. DON'T MAKE IT THE DEFAULT! And for heaven's sake make disabling/reversing it obvious. Who could possibly imagine that three finger swipes or triple clicks (seriously??) would be natural UI features?
I want to love BB, but this really crashes my party
Kim
Indianapolis

Pressing the power button three times enables Screen Reader Beta in Accessibility Mode, you must have also confirmed Confirmation Message (default On) to accidentally have gone into that mode.

Is there api function to change access mode and set a passcode to recording in meeting?

Is there api function to change access mode and set a passcode to recording in meeting?
When I'm trying to use "action=acl-field-update&acl-id=SCO_ID_RECORDING&field-id=meeting-passcode&value=MY_PASSC ODE" it just clean the password and do not set it or change.
And "action=permissions-update&acl-id=SCO_ID_RECORDING&principal-id=public-access&permission- id=view-hidden" do not work too.

There is not a specific API for doing this. This was discussed in the other Connect forum here, Adobe Connect User Community.
For you call I would make the second part differently. Instead of 'field-id=meeting-passcode&value=MY_PASSCODE' I would call 'meeting-passcode=MY_PASSCODE' and see if that worked better.

Command for: Access Mode for Result Set

Hi
Does anyone know if there is a command for "Access Mode for Result Set".
The default view for my characteristic in my query is "Characteristic Relationships".
I would like to have a command button for the user to be able to change the access mode to "Posted Values"
I have searched through all the commands but was unable to find this command.
OR if it is not available does anyone know the XHTML that I could enter into the web template.
Thanks in advance.
Ian

Hi
Does anyone know if there is a command for "Access Mode for Result Set".
The default view for my characteristic in my query is "Characteristic Relationships".
I would like to have a command button for the user to be able to change the access mode to "Posted Values"
I have searched through all the commands but was unable to find this command.
OR if it is not available does anyone know the XHTML that I could enter into the web template.
Thanks in advance.
Ian

How to display af:commandImageLink in accessibility mode

We use af:commandImageLink, and works all right. However, it does not show up in accessibility mode. Is it possible to display af:commandImageLink in accessibility mode?

I set shortDesc for af:commandImageLink and that text showed up as the link. So this problem is now resolved.

Problem with Restructuring of the cube + IO access mode is Direct IO

Hi All,
There is a problem faced with the restructuring of the cube.
Application Name: Sample
IO Access Mode: Direct I/O
Operation peformed: Copying of Outline from one server (Development) to other server (QA). Performed verification of the outline & saved. And while closing the outline window, it was asking for the restructure and started restructuring of outline.
In this case, some exceptional files are created at the log directory & ABNORMAL SHUTDOWN of application is happening.
Below are the entries in the application log file:
*Restructuring Database [AtLaunch]*+
Essbase Internal Logic Error [7333]+
*Exception error log [E:\Hyperion\logs\essbase\app\Sample\log00011.xcp] is being created...*+
Exception error log completed E:\Hyperion\logs\essbase\app\Sample\log00011.xcp please contact technical support and provide them with this file+
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING+
Please let me know the below information:
1.What will be happened to the Outline?
2.What is the reason of this kind of error and how to resolve this?
3.During the restructuring process, what will be happening if the access mode of application is in Direct I/O?

Exception error log [E:\Hyperion\logs\essbase\app\Sample\log00011.xcp] is being created...^^^You're on your eleventh crash? Not Good. Get that .xcp file to Oracle Support forthwith.
FWIW, some people swear by Direct I/O for its performance -- I was burnt, badly, by it in the past and never use it.
Copying of Outline from one server (Development) to other server (QA). Performed verification of the outline & saved. And while closing the outline window, it was asking for the restructure and started restructuring of outline.^^^You used the Migration Wizard? Did a Save As? Changed the density (my guess if BSO)? You did something that caused Essbase to do a restructure. A simple Save without changes shouldn't require that, I think.
Regards,
Cameron Lackpour
P.S. I have seen saves that do things like change BSO density (depends on whatever bugs your version has) and resulted in massive blocks. When Essbase tried to save -- KABOOM!
Edited by: CL on Apr 2, 2012 7:51 AM
Duh, if you're using Direct I/O, it is BSO.

3750X 10G uplink interfaces in access mode

Hi all,
just asking, any one knows if its possible to configure an 10G interface from a network module in a 3750 X switch in ACCESS MODE?

Hi Hans,
As mention you can use Tengig port to connect to Server same configuration as normal access port on Gig interface but check SFP transceiver at switch whether it is compatible with server end SFP.
Also if your server is is connected to Tengig port there over Subscription issue on uplink if it is 1 gig link.
Br.
Mohseen Patel

I/O Access Mode

At the moment I'm using the defulat "Buffered I/O" access mode. There isn't any real info I can find to really tell me the advantages for using Direct I/O and any benefits I may gain.
Does anyone have any best practice tips in this area?
Do you get performance savings due to better cache settings with using Direct I/O etc? Or is it one of those cube by cube choices that really doesn't make much difference.
My server has more ram that a goat farm, with 8 dual core CPU's running Solaris, so no limits on that side.
Thanks

The best practice seems to be to leave it in buffered mode. Direct I/O was introduced in late version 5 early version 6 and is supposed to give faster performance on unix boxes. It never seemed to be more efficient and the default was changed back to buffered mode in one of the version 6 releases. It is one of those things you have to play with. If you are trying to improve performance, give it a try on a test server and see if it buys you anything. Once in a great while, I have found it to be helpful, but most of the time I stick with buffered I/O

Serries 200 VLAN to 100 Serries Switches Can't Talk (Access Mode, Untagged)

Physical Setup:
2 Internet Connection (Internal and Hosting)
1 Series 200 Switch
4 Series 100 Switchs
6 VMware ESXi hosting boxes
200 Series port layout
P1 - Internet (Hosting)
P12 - Internet (Internal)
P3-4, 14-15 - 100 series switches
P5-7, 16-18 - ESXi Hosts
My plan is to have
P1 be on VLAN 10
P2 on VLAN 5
P3-4,14-15 on VLAN 5
P5-7,16-18 as Trunks for VLAN 5 and 10
The idea being that I will use VMware's tagging on the servers to allow it to have VMs for both networks while still keeping them logically separated at the switch level. I know how to do this in VMware, just having problems getting the series 200 switch configured correctly for the VLANs.
From default configurations for the switch I Added VLAN 5
Then I Configured P3-4, 14-15 as Access Ports, Untagged for VLAN 5 with PVID 5
My understanding is hat this will allow any VLAN 5 tagged packet to go out of these ports (Stripping the VLAN 5 tag as it goes), and it will tag all incoming untagged packets on these ports for VLAN 5; Thus allowing the series 100 switchs and all attached machines to participate in VLAN 5 without any of those devices knowing anything about VLANs.
At this point I tired going from one of these ports with untagged traffic to a machine on another port. I was unable to communicate. Am I missing something\misunderstanding how to set this up?
Oh and the default VLAN (VLAN 1) does still exist at this point, but P3-4, 14-15 where automatically excluded from it when I stuck them in Access Mode, witch I believe I want, since only VLAN 5 should be able to use these ports.
Any help\pointers are greatly appreciated.

A member of which VLAN ID is that device from which you trying to reach that switch?
Is that device directly connected to switch WasteWaterSG30010MPP? If yes, to which port?
If you are connecting from different VLAN than VLAN2, are you using routing between VLANs? Where is that routing device connected to?
> I also have another switch that connects to the network through this switch and am able to telnet to it.
that second switch member of same VLAN 2? Or management is part of different VLAN?
..too few information to be able to give you final answer.

I am stuck on the Subway Surfers app in guided access mode the info its giving me to fix it is a liar! none of the buttons will work all I can do is lock it unlock it and play subway surfers. I cannot turn it off and refuse to let it die. HELP ME PLEASE!!

Ok I dont understand this SOS!!!! Please dont tell me to restart my Ipad Cause none of the buttons work except the lock button and that will not allow me to turn it off please help all suggestions are welcome.

What you need to do is triple-press the HOME BUTTON three times. You will be prompted to enter your passcode. This will bring up the options for guided-access mode and you will then need to click "End" in the top corner.
Guided-access mode must have accidentally been enabled by triple-clicking the home button.

Accessibility mode

Similar Messages

Maybe you are looking for