Accessing cisco 1242AG series AP through browser

HI,
cisco 1242AGseries AP is associated with WLC, I can access it through console but when I type
IP of AP in address bar, it doesnt come.AP takes cnfiguration from WLC automatically.
HOw can i access it through web browser?

You need to conver the lightweight AP to autonomous IOS.
Use these steps:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

Similar Messages

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 >       " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
            IP_ADDRESS: The IP address for this unit
        IP_SUBNET_MASK: The subnet mask for this unit
       DEFAULT_GATEWAY: The default gateway for this unit
           TFTP_SERVER: The IP address of the server to fetch from
             TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
          TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
      TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
          TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
         TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
          TFTP_MACADDR: The MAC address for this unit
               FE_PORT: 0= (default), 1
         FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                        5=Auto (default)
      TFTP_DESTINATION: The flash destination device for the file
                        flash:(default), usbflash0:, usbflash1:
Command line options:
   -h: this help screen
   -r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >

What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick

PoE for Cisco 1242AG and 1310G Access Points

Dear All,
we purchased a Cisco 1242AG and a 1310G Access Point and in the DataSheet it was specified that these APs support Power-over-Ethernet. The problem is we don't see any RJ-45 port in either AP which could be used for connecting the AP to an PoE Switch. Can you please tell us how we can connect these APs to an 802.11af compatible PowerBridge (by Intermec) ? Thanks.

Hi Thorsten,
The 1242 should be good to go but the 1310 is powered quite differently. Have a look;
AP 1240 Series - Hardware (see diagram)
http://www.cisco.com/en/US/products/ps6521/products_installation_guide_chapter09186a008079b7f4.html#wp1071972
Connecting the Ethernet and Power Cables
http://www.cisco.com/en/US/products/ps6521/products_installation_guide_chapter09186a008079b7f4.html#wp1052781
1300 Series Power
Power
The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.
The power injector is available in two models:
Cisco Aironet Power Injector LR2 standard version (included with the access point/bridge)
48-VDC input power
Uses the 48-VDC power module (included with the access point/bridge)
Cisco Aironet Power Injector LR2T optional transportation version
12- to 40-VDC input power
Note The power injector and the power module must not be placed in an outdoor unprotected environment. The power module must not be placed in a building's environmental air space, such as above a suspended ceiling.
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_chapter09186a008079b93b.html#wp1051840
Dual coaxial cable to run from the power injector to the 1300. See attached notes:
Cisco Aironet 1300 Series
Cisco Aironet 1300 Series Access Point/Bridge Power Injector
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable?enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Ethernet Ports
The access point/bridge dual-coax Ethernet ports consists of a pair of 75-ohm F-type connectors, linking the unit to your 100BASE-T Ethernet LAN through the power injector. The dual-coax cables are used to send and receive Ethernet data and to supply inline 48-VDC power from the power injector to the access point/bridge.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_book09186a00804d3095.html
AIR-PWRINJ-BLR2
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html
Hope this helps!
Rob

Unable to access cisco asa via https or asdm!! connection interrupted message appears on the browser

Hey guys,
I am unable to access cisco asa device using https and cannot lunch asdm, after recent power failure at our location. I have asdm installed on my machine and whenever i try to access the asdm, receive Error: unable to lunch device manager from X.X.X.X The following is log from java console
Trying for ASDM version file; url = https://x.x.x.x/admin/
javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
When i try to access it from the browser it show error message
"The connection was interrupted"
I am running CISCO ASA 8.3 (1)
with asdm image as asdm 7.1.3
JAVA version installed Java 7 update 71
I have added the https:> to exception site list and set security level to medium,
even ssh access is not working !!
I would appreciate if anyone can help me out!!
Thanks
Fareed

Hey lcaruso,
thanks for information!!
i was able to connection through console as suggested and regenerated the rsa key .. was able to connection through ssh, but the issue with the asdm or web access was not resolved.
I have tried few of the steps as suggested on
https://supportforums.cisco.com/document/49741/asa-pixfwsm-unable-manage-unit-sshtelnetasdm#collect_captures
capture output
ZHHFP-FIREWALL1(config)# sh cap capin
139 packets captured
1: 18:50:17.654720 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: S 2567327150:2567327150(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
2: 18:50:17.654812 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: S 590825877:590825877(0) ack 2567327151 win 8192 <mss 1380>
3: 18:50:17.655621 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: . ack 590825878 win 65520
4: 18:50:17.656078 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: P 2567327151:2567327332(181) ack 590825878 win 65520
5: 18:50:17.656139 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: . ack 2567327332 win 8192
6: 18:50:17.656475 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: FP 590825878:590825878(0) ack 2567327332 win 8192
7: 18:50:17.657696 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: . ack 590825879 win 65520
8: 18:50:17.657802 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: F 2567327332:2567327332(0) ack 590825879 win 65520
9: 18:50:17.657848 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: . ack 2567327333 win 8192
10: 18:50:17.658108 802.1Q vlan#1 P0 192.168.160.113.58085 > 192.168.160.126.8
443: S 1351758892:1351758892(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
also i have downgraded the java to 1.6_45 but still not luck.
error message i received on java console
Trying for IDM. url=https://x.x.x.x/idm/idm.jnlp/
javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at com.cisco.launcher.w.a(Unknown Source)
at com.cisco.launcher.s.for(Unknown Source)
at com.cisco.launcher.s.new(Unknown Source)
at com.cisco.launcher.s.access$000(Unknown Source)
at com.cisco.launcher.s$2.a(Unknown Source)
at com.cisco.launcher.g$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.EOFException: SSL peer shut down incorrectly
at sun.security.ssl.InputRecord.read(Unknown Source)
... 15 more
Any help would be highly appreciated!!
Thanks
Fareed

Access reports through browser

Hi,
Reports developed through sql developer are accessable through browser

As I said in your other thread: they aren't.
If you have a specific, well thought through request, log it at the SQL Developer Exchange.
K.

Access C4 through browser

Hi All,
How do I access Sun Storedge C4 through browser?
Any specific port numbers?
Ashraf.

Hello Ashraf,
How do I access Sun Storedge C4 through browser?
Any specific port numbers?
I would recommend to review the User's Guide that came with the C4. The Remote Management is described in Chapter 3 (may be different if Sun supplies their own manuals ..)
Basically you have use the front panel control (Network setup) to assign an IP address to the Remote Management (either an static IP address or use DHCP).
Enter http://IPaddress/ (where IP address is the IP address for the C4) to access the web interface.
You are asked for the username and password (use the default or the ones you assigned).
Unfortunately the documentation isn't available in the Sun System Handbook (SSH) nor on docs.sun.com. The web site of the original manufacturer was the rescue ...
I would recommend to open a service case with Sun to ask why these manuals (or a link/reference to the other web site) aren't available in the SSH.
When I asked the Sun Storage Division (some years ago) why the StorEdge L9 User's Guide wasn't included in the SSH, the document was added.
The Full Components List of the C4 (in the public SSH) lacks this note: Technical Support is supplied by Quantum.
Therefore this omission should be forwarded to the SSH team as well.
Michael

Problem accessing WL6.1 server from IE browser

          Hello,
          Im currently running weblogic server 6.1sp4 on microsoft xp home edition.
          I started weblogic using the startWebLogic.cmd file. For the most part it looks
          like the server starts up correctly but when I try to access the index.html page
          through internet explorer 6.0 by typing http://localhost:8001/index.html I get
          a "The page cannot be displayed" error.
          The server log looks alright upon start up.
          below is the output from the logs.
          C:\bea\wlserver6.1\config\mydomain>startWebLogic.cmd
          C:\bea\wlserver6.1>set PATH=.\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Syst
          em32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel
          C:\bea\wlserver6.1>set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
          C:\bea\wlserver6.1>echo off
          * To start WebLogic Server, use the password *
          * assigned to the system user. The system *
          * username and password must also be used to *
          * access the WebLogic Server console from a web *
          * browser. *
          C:\bea\wlserver6.1>"C:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -classpath
          ;.\lib\weblogic_sp.jar;.\lib\weblogic.jar" -Dweblogic.Domain=mydomain -Dweblogic
          .Name=myserver "-Dbea.home=C:\\bea" -Dos.name="windows 2000" -Dweblogic.manageme
          nt.password=arnold79 -Dweblogic.ProductionModeEnabled=true "-Djava.security.poli
          cy==C:\bea\wlserver6.1/lib/weblogic.policy" weblogic.Server
          Starting WebLogic Server ....
          <Nov 22, 2003 10:42:07 PM EST> <Notice> <Management> <Loading configuration file
          .\config\mydomain\config.xml ...>
          <Nov 22, 2003 10:42:08 PM EST> <Notice> <WebLogicServer> <Starting WebLogic Admi
          n Server "myserver" for domain "mydomain">
          <Nov 22, 2003 10:42:10 PM EST> <Notice> <Management> <Applications will only be
          copied to managed servers when needed. To force applications to be copied to man
          aged servers when they are started, specify system property -Dweblogic.managemen
          t.forceApplicationCopy=true on your startup command.>
          <Nov 22, 2003 10:42:11 PM EST> <Notice> <Management> <Application Poller not sta
          rted for production server.>
          <Nov 22, 2003 10:42:11 PM EST> <Notice> <WebLogicServer> <ListenThread listening
          on port 8001>
          <Nov 22, 2003 10:42:11 PM EST> <Notice> <WebLogicServer> <SSLListenThread listen
          ing on port 8002>
          <Nov 22, 2003 10:42:12 PM EST> <Notice> <Management> <Starting discovery of Mana
          ged Server... This feature is on by default, you may turn this off by passing
          -D
          weblogic.management.discover=false>
          <Nov 22, 2003 10:42:12 PM EST> <Notice> <WebLogicServer> <Started WebLogic Admin
          Server "myserver" for domain "mydomain" running in Production Mode>


"Anant Kadiyala" <[email protected]> wrote in message
news:3f79ca48$[email protected]..
>
Have anyone browsed the Embedded LDAP server successfully in 8.1GA usingan external
LDAP browser?
I followed instructions onhttp://edocs.bea.com/wls/docs81/secmanage/ldap.html#1100263
but hit a road block. The broswer is not able to connect when using UserDN. When
I connect using anonymous mode, it is able to connect fine.
Is there a bug in the 8.1 Embedded LDAP server?
Are you using the cn=Admin dn or a user dn? If you are using a user dn, you
will need to
modify acls.prop.

Can i gain access to iphones file system through wifi?

Just curious if i Can i gain access to iphones file system through wifi?

So i can't browse the file system at all?

Cisco 4003 series switch

Hi...All.
In cisco 4003 series switch i m getting error in post test its says , rtc failed, after that supervisorengineer wxx4012 LED status is Red.can any one tell me wt that means and hw to solve that problem.

plz fine the post test script...
003-B-Ground> (enable) 0:00.523556: Please set IPAddr variable
0:00.524147: Please set Netmask variable
0:00.524511: Please set Broadcast variable
0:00.525113: Please set TftpServer variable to do tftp downloads
0:00.525658: Network is not configured
WS-X4012 bootrom version 5.4(1), built on 2000.02.17 18:28:09
H/W Revisions: Meteor: 4 Comet: 8 Board: 2
Supervisor MAC addresses: 00:02:16:d2:5a:00 through 00:02:16:d2:5d:ff (1024 addr
esses)
Installed memory: 64 MB
Testing LEDs.... done!
The system will autoboot in 5 seconds.
Type control-C to prevent autobooting.
rommon 1 >
The system will now begin autobooting.
Autobooting image: "bootflash:cat4000.5-4-2.bin"
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCC#############################
Starting Off-line Diagnostics
Mapping in TempFs
Board type is WS-X4012
DiagBootMode value is "post"
Telling ApkPageMan that we have 12288 pages of memory
Loading diagnostics...
Power-on-self-test for Module 1: WS-X4012
Status: (. = Pass, F = Fail)
processor: . cpu sdram: . rtc: F
eprom: . nvram: . flash: .
temperature sensor: . enet console port: . switch port 0: .
switch port 1: . switch port 2: . switch port 3: .
switch port 4: . switch port 5: . switch port 6: .
switch port 7: . switch port 8: . switch port 9: .
switch port 10: . switch port 11: . switch registers: .
switch sram: .
Module 1 Failed
Power-on-self-test for Module 2: not present
Port status: (. = Pass, F = Fail)
Module 2 Ignored
Power-on-self-test for Module 3: not present
Port status: (. = Pass, F = Fail)
Module 3 Ignored
Exiting Off-line Diagnostics
Failed Module Bringup Process
Use 'show test 1' to see results of tests.
Cisco Systems, Inc. Console

Cannot access Cisco MIBs via SNMPGET

Hello, I'm sure this is a simple fix and I'm too stupid to figure it out, but I'm having trouble accessing Cisco ACE specific OIDs via Net-SNMPs tools. If I run snmpwalk on the device, I get a nice list of standard SNMP OIDs such as SNMPv2-MIB, IF-MIB, IP-MIB, etc with values such as the device name, interface IP counters and all that stuff. But I don't see any Cisco specific OIDs in the list. I really want to be able to monitor the load across real servers and server farms and such on this ACE module.
So, for example, I try running the following command and it says no such object:
snmpget -m +CISCO-SLB-MIB -On -v 2c -c communityname ipaddress CISCO-SLB-MIB::slbServerFarms
.1.3.6.1.4.1.9.9.161.1.2 = No Such Object available on this agent at this OID
I read you should try adding an index to the OID as there may be multiple sub objects (and of course there are multiple server farms) but I get the same thing:
snmpget -m +CISCO-SLB-MIB -On -v 2c -c communityname ipaddress CISCO-SLB-MIB::slbServerFarms.0
.1.3.6.1.4.1.9.9.161.1.2.0 = No Such Object available on this agent at this OID
Just to confirm a valid OID, I get this:
snmpget -m +CISCO-SLB-MIB -On -v 2c -c communityname ipaddress SNMPv2-MIB::sysDescr.0
.1.3.6.1.2.1.1.1.0 = STRING: Application Control Engine Service Module
I also tried snmptable with CISCO-ENHANCED-SLB-MIB::cesServerFarmRserverTable and it just says "Was that a table?"
So I think it must be a permission problem or some config that I have to tweak. Right now the only SNMP config is:
snmp-server community communityname group Network-Monitor
My device version info is:
Software
loader: Version 12.2[120]
system: Version A2(1.4) [build 3.0(0)A2(1.4) adbuild_11:54:12-2009/03/05_/auto/adbu-rel2/rel_a2_1_4_throttle/REL_3_0_0_A2_1_4]
system image file: [LCP] disk0:c6ace-t1k9-mz.A2_1_4.bin
installed license: ACE-SEC-LIC-K9 ACE-SSL-05K-K9
Thank you for your help!

This is an interesting thread, and probably something which is unclear to a lot of people. Tables and their entries (think header rows) are inaccessible because they do not contain data directly. Data is only contained in the cells within the table. The cells in this case are the SNMP objects defined within each table entry (or row). So, a table is inaccessible as a whole, but each of its data cells can be accessed.
If you think of it like a spreadsheet, it may be a little more useful. But let's try a visual.
cesServerFarmRserverTable
cesServerFarmRserverPort
cesServerFarmRserverAdminWeight
cesServerFarmRserverOperWeight
80
100
100
8080
50
10
The header row in this table is called cesServerFarmRserverEntry. It contains the column names for our data. Each row has a unique number associated with it. That is the cseServerFarmRserverPort. In a typical spreadsheet program, this would be the column at the far left which you cannot edit. It just enumerates the rows. In this example, that column is named cesServerFarmRserverPort. If I wanted to tell someone how to get the value of cesServerFarmRserverAdminWeight at a particular row, I would say, "go to row 80, and read the value from the cesServerFarmRserverAdminWeight column. In this case, they would read 100.
SNMP operates in the same fashion. For one to get a specific value (i.e. perform an SNMP GET), one must know the specific column name and row number. In the actual case of the cesServerFarmRserverTable, the row number is actually a combination of the slbEntity, slbServerFarmName, cesRserverName, and cesServerFarmRserverPort, but the concept is the same. You can only do an SNMP GET on a precise address in a given table (i.e. on a cell). To do a GET on cesServerFarmRserverTable directly would make no sense since an atomic value could not be returned.
An SNMP Walk, on the other hand, allows you to start with the table itself, then walk through each cell in the table, printing out the value at that cell.
A tool like snmptable essentially performs recursive GET-NEXT queries to walk through all of the rows, then print the value of each cell in a tabular format.

Viewing xsql files through browser

Hi all,
a basic question regarding creating xsql files using jDeveloper...
Once created if I hit run, a Netscape browser pops up, accessing ...myhtml/WebAppRunner.html
this in turn pops up a new Internet explorer browser with the results of the database query as a temp xml file.
My question is that if I access the <file>.xsql through either browser directly (not using run in jdev) then I just get the textual contents of the file, I thought the database query would be automatically run and only the results shown?
I want to do simple queries, and be able to enter the filename (and ?paramters) in to the location bar within the browser but currently this doesnt seem to work. Do I have to change any properties or plug-ins for the browser?
All info gratefully received, regards from an Oracle developer having his first look at this funky xml-world!
Julian

The query executes when you "run" the XSQL page through a Web server (JDeveloper includes a simple one-person Web server for development and testing) that invokes the underlying Java code. When you access the same XSQL page through the file system, the code doesn't execute, and, as you have seen, the browser displays the contents of the file.
To do the kind of testing you describe, you need a Web server, for example, the Web-to-Go server that comes with the XSQL Servlet, or Apache (it's free). OTN has some sample apps that show how to do this. See
[list][*]WebStore B2B Exchange
[*]XML Flight Finder[list]
for more information.
Regards,
-rh
null

Cisco 500 series switches

Dear support,
Can Cisco 500 series switches deliver 24V on the access port for POE operation?
Best Regards

I belive the 802..2F and 802.2at poe standard is strictly 48v. I haven't found anything to the contrary. There are inline convertes 48v-24v or something like this that can be used with a non poe switch: http://www.digital-loggers.com/poe24.html but that means all conected device would be off the same access port / vlan.

NetConfig issue wrt Cisco 3900 Series Router

Hi Cisco;
I can't able to configure my Cisco 3900 series Router via NetConfig tool. While I am able to Configure all other Routers (7600, & 2800) and Switchs (6500, 3700, 3560). I can accessable 3900 Series Router via Inventory Collection, Sync Archieve, Campus Manager, DFM and etc.
I have Cisco LMS 3.2 with RME 4.3 & using SNMPV3.
Thanks for your support.
Best regards;
Shoaib Ahmed

Hi Clarke;
Please find the requested Screen Shot.
Actully my problem is that, I can't configure my Cisco 3945 Routers (Shows not applicable devices) via NetConfig tool. I can use other tools like Sync archieve and etc is working fine for these 3945 routers.
Best regards;
Shoaib Ahmed

Vnc through browser

Hi,
I have configured VNC on linux server, now i want to access it through browser, how can i get the url
REgards

Hi,
See this link.
VNC Browser Access
http://tinyurl.com/38etlgo
Thanks,
Hussein

Configuring New Interface and NAT on Cisco 1900 Series Router.

Hello Cisco Team,
am asking for advise on how to how setup NAT rules and overload on my 2nd interface on my cisco 1900 series router,am not sure where am getting it wrong.
my router has 2 interface, interface one has IP address 10.5.5.5X and plugs into my ASA firwall and into my switch and works just fine.
i have just configured my second Interface with a new IP 172.16.0.X- i want to NAT my new IP address to our public IP address which is 41.77.X.X
my configuration so far are as follows.
GigabitEthernet0/0 172.16.0.X YES manual up up - Not working
GigabitEthernet0/1 10.5.5.X YES NVRAM up up- this works fine
GigabitEthernet0/0/0 41.77.X.X YES NVRAM up up

Hello Jon,
Thanks for your feedback, my router configuration are as follows.
interface GigabitEthernet0/0
description WL2504
ip address 172.16.0.2 255.255.254.0
duplex auto
speed auto
interface GigabitEthernet0/1
description WAN
ip address 10.55.55.2 255.255.255.252
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/0/0
description LINK TO CLT INTERNET
ip address 41.X.X.130 255.255.255.248
ip nat outside
ip virtual-reassembly in
duplex full
speed 100
media-type sfp
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list 1 interface GigabitEthernet0/0/0 overload
ip route 0.0.0.0 0.0.0.0 41.X.X.129
ip route 41.X.X.136 255.255.255.248 10.55.55.1
ip route 192.168.0.0 255.255.255.0 10.55.55.1
access-list 1 permit 10.55.55.0 0.0.0.255
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 permit 192.168.1.0 0.0.0.255
from the router interface  interface GigabitEthernet0/0- I will connect it to my wireless Controller WL 2504

Accessing cisco 1242AG series AP through browser

Similar Messages

Maybe you are looking for