Accessing Sequence FIle information

I want to programmatically access a sequence file's information (sub-steps & sub-sequences) prior to actually loading the sequence. I.e. I’m trying to make a stand alone GUI that allows me to select a sequence file and which sub sequence of that file I want to run at a later time. In C# I declare a sequence: NationalInstruments.TestStand.Interop.API.Sequence seq; But Sequence in an abstract class so I can’t directly create an instance of it. Ditto that for a NationalInstruments.TestStand.Interop.API.SequenceFile. Anyone know if this can be done and how to do so?

Hello John 242424,
Thank you for posting on the NI Discussion Forums. Attached is an example written in C#.NET 2008 which takes in a sequence file (chosen by the user) and then retrieves the names of its sequences, and steps within those sequences upon the click of another button. The key methods it uses are the SequenceFile.GetSequence( ) and Sequence.GetStep( ) methods. You will notice that Sequence.GetStep( ) currently only returns the steps in the Main step group. If you wish to find the steps in Setup and Cleanup, you will have to add this functionality.
Chris_G
Sr Test Engineer
Medtronic, Inc.
Attachments:
TestStand1.zip ‏46 KB

Similar Messages

How do I access my file information in photoshop express ?

How do i access my file information in photoshop express

This Forum is dedicated to Photoshop proper, for queries concerning other applications please refer to the corresponding Fora.
Photoshop Express

[Access right]File information are different between local a server storage

Good morning all,
We have serveral small issues and I am saking to my self 8and to you) if this can not have an impact.
My iMac have 3 partitions.
1) OS X 10.6.2
2) User's datas
3) Boot camp
All of my users use a network account and their Home are automounted. I means that we they save a file to their home, the file is saved into the server. This is the same for the /Library/Preferences/... .
I discovered some think interesting:
When I create and save a file, on loacl iMac, then I cmd+i (file info windows), under the sharing & Permission section, I can see my user name with read&write permission, *AND my user name is followed by "(me)"*
If I do exactely the same, but on a server folder, and then I pomme+i (cmd+i), the file info window, show me the same information, *but without the "(me)"*.
Some one could explain me what does that "me". Which impact it has, and frist all, *why that "me" does not appear on the server local while the network account are created on the server and not on local*
Many thank for your advise

Hello,
Someone has an idea about the (me).
To resume :
I have a file on my local laptop.
If I press cmd+i and I look at the "Share & Permission", I can see my user name followed by a : (me).
If that same file is syncronized to the file server, and I cmd+i on that file. Under the "sahre & permission", I still can see the same information, but excepted for my username, the (me) does not follow my user name any more.
Do you know why (me) is not displayed on remote files?
Thk

Accessing Default Files/ Information Gathering

I am running a web application in IBM Websphere server.
Able the access the *.xml or any other file stored in server.
Can any anyone suggest a way to restrict it.

place all the xml in you web-inf folder or write some filter to control the access

Auditing all users file access - too much information

Hi, I have enabled a GPO With the following: Computer Configuration\Policies\Windows Settings\Security Settings\Advanced Audit Policy Configuration\Audit Policies\Object Access -> Audit File System -
Success on a file server.
After that, I have enabled successful Create files/Create Folders on a folder for the built-in group Everyone.
That part works fine, I can see when users are creating files on the folders. But I also get a lot of Extreme amounts of other events logged in the Security log, and everything is coming from the backup agent running on the server (NetBackup in this case).
How come that a backup agent is creating the events like this? It makes filtering much harder afterwards. The business requirements is to audit Everyone who is adding files to a specific folder, not all the rest of the server. The server
is Win2008 R2.
Example:
An attempt was made to access an object.
Subject:
Security ID: SYSTEM
Account Name: FILESERVER01$
Account Domain: MYDOMAIN
Logon ID: 0x3e7
Object:
Object Server: Security
Object Type: File
Object Name: \Device\HarddiskVolumeShadowCopy58\Windows\winsxs\amd64_microsoft-windows-audio-audiocore_31bf3856ad364e35_6.1.7601.18619_none_d4cab625fb3adf96\audiosrv.dll
Handle ID: 0x3c4
Process Information:
Process ID: 0x1048
Process Name: C:\Program Files\VERITAS\NetBackup\bin\bpbkar32.exe
Access Request Information:
Accesses: WriteAttributes

Hi Steve,
I feel your pain, I turned on logging on a file server and found the security log filling 4GB in a couple of hours. I think the key is being very selective about what you audit. I found this article useful and it had some powershell and ideas for helping
make sense of the information overload - http://blogs.technet.com/b/mspfe/archive/2013/08/27/auditing-file-access-on-file-servers.aspx
In my opinion though you really need a third party solution to make this viable, two I've looked at are
Netwrix File Server Auditor and
FileAudit which seem very similar in functionality and ease of use. These basically read in the event log to provide long term archive and reporting on it.
Good luck,
Tim

Putting header information on access log files

Can anybody suggest how to put a Apache Extended with Cookies LogFormat(i.e. "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"{User-Agent} i\"\"{Cookie}i\"") information in access log file headers in Oracle10g application server probably for webcache. I also want to know the location in which and where this configuration files resides.
Thanks,
Kamal

Are You using IronPort URL Filters or Cisco IronPort Web Usage Controls.
I'm using Cisco IronPort Web Usage Controlsand it shows:
IW_csec,-,"Unknown","-","Unknown","Unknown","-","-",462.00,0,-,"-","-">
Seems Your does not handle categorization and skips that part.

Retrive User & Cookie Information Using Apache Access Log Files

Hi All
The following information are not showing under Apache access log files that is used with Oracle Appserver (10g 10.1.2) given below.
1)User Informations
2)Cookie Informations
We are using below Commands in the httpd.conf File that have specified in the documents link given below
http://download-west.oracle.com/docs/cd/B31017_01/web.1013/q20201/logs.html#accesslog
LogFormat "%h %l %u %t \"%r\" %>s %b %v \"%{Referer}i\" \"%{User-Agent}i\" \"%{cookie}n\"" combined
Please anyone can tell what are the necessary informations that we have to specified in the httpd.conf file to retrive Cookie and user Informations.
Thanks to all
Sona

Thanks for your reply
Can u please check the below link for the cookie flag information
http://download-west.oracle.com/docs/cd/B31017_01/web.1013/q20201/mod/mod_usertrack.html
For your information i have logged in already.
Our Sample O/p is given below
151.146.191.186 - - [28/Dec/2006:10:13:05 +0530] "GET /Tab_files/lowerbox.gif HT
TP/1.1" 200 150 - "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows)"
We are using the below command format
LogFormat "%h %l %u %t \"%r\" %>s %b %{cookie}n \"%{Referer}i\" \"%{User-Agent}i\"" combined
But User and Cookie informations is not displaying.
what steps should i follow.
Looking for the favourable reply
Thanks

Retrive Cookie Information in the Apache Access Log Files

Hi All,
Can anyone give me the solution or any link to follow the steps for retriving cookie information and user information in the Apache Access log files using httpd.conf file.
we are using Oracle Appserver 10.1.2 Version and we have specfied below commands in httpd.conf file.
LogFormat "%h %l %u %t \"%r\" %>s %b %v \"%{Referer}i\" \"%{User-Agent}i\" \"%{cookie}n\"" combined
But it failed to retrive cookie and user informations
Looking forward any one help.....
Thanks
Regards
Sona

Thanks for your reply
Can u please check the below link for the cookie flag information
http://download-west.oracle.com/docs/cd/B31017_01/web.1013/q20201/mod/mod_usertrack.html
For your information i have logged in already.
Our Sample O/p is given below
151.146.191.186 - - [28/Dec/2006:10:13:05 +0530] "GET /Tab_files/lowerbox.gif HT
TP/1.1" 200 150 - "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows)"
We are using the below command format
LogFormat "%h %l %u %t \"%r\" %>s %b %{cookie}n \"%{Referer}i\" \"%{User-Agent}i\"" combined
But User and Cookie informations is not displaying.
what steps should i follow.
Looking for the favourable reply
Thanks

I want to Access the Sequence File Comment In the User Interface...

I can access the comment from the MainSequence of the Sequence, but not the sequence comment (SeqEditor: Edit->Sequence File Properties...).
I'm using the following C command:
TS_PropertyGetProperty (panelRec->seqFile->seqFileH, &errorInfo, TS_PropertyComment, CAVT_CSTRING, &psCommentStr);
the psCommentStr comes up empty and I get no errors, although, I know that there is a comment entered in the field. I added this call to the UpdateOnSequenceChange function of seqdisp.c of the Example User Interface.
I'm pretty sure that this should work, but all I get is a "" (Empty string).

Hi Capt. Jack,
The comment property of a sequence file is not stored in the PropertyObject of the sequence file itself. It is instead stored in the sequence file's PropertyObjectFile.Data PropertyObject's PropertyObject.Comment property. There is a KnowledgeBase document at the following link that explains this along with an easy to follow sequence file example that uses ActiveX Automation Adapter steps to access the sequence file's own comment property in the manner mentioned above:
Link -> http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/64fbaf3526e8511786256bd1006b8e1c?OpenDocument
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

How to display sequence file version in report?

We would like to add the sequence file version number
(Edit>>Sequence File Properties...) to our reports and record it
in the test result database. How do you access this property from
a step in the sequence?

OR use RunState.SequenceFile.Data.Version.
For the Report Header:
In a ModifyReportHeader callback, add a statement step that has this expression:
Parameters.ReportHeader += RunState.SequenceFile.Data.Version
This will append the SequenceFile Version to the header string. You will probably want to play with placement and may decide to insert more than just the version.
Also, note that the ModifyReportHeader callback is only called when a Sequence is used to generate the report body. See the bottom of the Content tab of the Report Options Dialog (Configure>>Report Options) for this setting.
For Database Logging:
If you haven’t done this before, you will need to customize the schema and the database to include this additional “result”. I recommend adding a column to the UUT_RESULT table for this sort of information. If you have taken the TestStand I: Introduction course, this process is covered in Lesson 11. Otherwise, there is background information in the TestStand Help and Chapter 6 of the TestStand Reference Manual. The key will be found in Configure>>Database Options.
Regards,
Eric

Sequence File Documentation adding code module inputs/outputs

Hi there,
I would like to document my sequence file. I have used the TS tools| Sequence File Documentation which works fine but I would like to add more information like the code module input and outputs.
I am using LabVIEW code modules.
How can I access the VI Parameter table: parameter name, type, in/out and value and then add them to docgen_txt.seq ?
Any suggestion would be much appreciated.
Thanks in advance..
Marken

Hi Marken
In this thread there is an example how to create a LV-Module dyamically. Accessing the LV-Parametertable is a sub topic there.
http://forums.ni.com/t5/NI-TestStand/Create-a-LabVIEW-Step-dynamically/m-p/977348#M25792
Hope this helps,
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Can we view line numbers next to each step in sequence file ?

Hi,
I have a sequence file having 600 steps. I would like to know is there any option in test stand to set line number for each step in sequence editor so that it will be helpful for review.
Example:
1 Action1
2 Action2
600 Action600
Regards,
krishna
Solved!
Go to Solution.

Krishna,
If you just want to know the index of a step, this information is displayed at the bottom of the sequence editor in the status bar. It shows you how many steps there are in the sequence, how many you have selected, and the index(es) of the selected step(s).
It is also possible to display this information in the steps view as a column if you are willing to create a new column. Follow the instructions in this KB to see how to create a new column:Changing Columns Properties of the TestStand Sequence Editor Execution View Window.
One of the types of colums is Index. Simply set your column to that type and you will see step indexes as shown below.
Message Edited by Josh W. on 07-01-2009 01:50 PM
Message Edited by Josh W. on 07-01-2009 01:53 PM
Josh W.
Certified TestStand Architect
Formerly blue

Mail cannot access your mailbox information because it is in use

I have my mail on a Truecrypt drive and I have an alias pointing to that drive in my library and so sometimes I get this message:
"Mail cannot access your mailbox information because it is in use."
Options are:
"Quit and rebuild Information" or "Quit"
If I rebuild then I was losing all my sent messages which is a drag and it takes a while to re-download all the messages. So what I tried was deleting the Envelope Index.lock file and then launch mail and it started up with no problems.
I think the reason this is happening is that it is possible that when I shut my computer down, Truecrypt dismounts the drive while Mail is accessing the mail folder (hence the lock file) and so when I start up again and remount the truecrypt drive that lock file is still there and I have to delete it or Mail thinks some other program is using the mail folder. Just a guess.
Hope this helps someone else if they Google this error.

I do but I do it from another computer -- that is the whole point of IMAP, by the way. I don't see how my accessing the IMAP server from another computer should cause Mail.app to think that my mailboxes on my local host, which are just copies, need to be rebuilt. I filed a bug on this and Apple gave me the annoying "Known issue" response, which means maybe they'll fix it, maybe not, thank you very much. It went away for a while, and now it's back again... sigh.

Backup stopped before completing. The process cannot access the file because it is being used by another process

I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..Michael

I am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '‎2011‎-‎03‎-‎25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure

How do I fix this error: DF024: Unable to preserve original file at ... Error 32 The process cannot access the file because it is being used by another process.(Seq 1352). ?

I am installing creative the cloud Illustrator desktop app on a machine with windows 7 64 bit running in a domain environment. The download starts and takes about runs for a bout 10 minutes and then stops with the error: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1352)
I am logged in as a network administrator and there are no other apps except a web browser (Chrome) running. There are no other users logged into the machine.
How can I see what other process is using the needed file so that I can fix it?
Thanks

MelissaB34 it looks like you already are reviewing your installation log files but you can find more information at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. From the error you have posted it appears that your current User account is either unable to update C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll or does not have sufficient file permissions to do so. Since you mentioned you are on a domain please ensure that you are working with your I.T. department and have correct access to this directory.
You may want to also consider logging in under a local administrator account to see if you face the same difficulties. This would help you determine if you are facing a file corruption issue or file permission issue.

Accessing Sequence FIle information

Similar Messages

Maybe you are looking for