Accessing the Permission,Properties and Subscription tab with Direct URL.

Hello,
I am trying to accessing the permission tab with direct url, but i could not able to find a way to access it.
we can access this permissions tab browsing through Details - > Settings -> Permissions , the similar way Details - > Settings -> subscriptions.
But i wanted to use a single(i.e direct url) which can open these tabs.
Could you please help me on this.
Thanks
Best Regards
Manoj K

Hello,
I have resolved this issue by myself.
You can access the subscription interface directly using the below url.
http://<hostname>:<port>/irj/go/km/details/documents?isp=subscription&Standalone=true&StartPage=StandaloneDetailsPage
or
https://<hostname>:<port>/irj/go/km/details/documents?isp=subscription&Standalone=true&StartPage=StandaloneDetailsPage
And for the properties interface by using the below url.
http://<hostname>:<port>/irj/go/km/details/documents?isp=properties&Standalone=true&StartPage=StandaloneDetailsPage
For the permissions interface.
https://<hostname>:<port>/irj/go/km/details/documents?isp=permissions&Standalone=true&StartPage=StandaloneDetailsPage

Similar Messages

My daughter continues to request to change the password so she can access the app. store and download stuff with out my permission. How can I block the app. store from her ipod or change it so she has no access to it?

My daughter continues to request a new password when I change it so she can access the App. store and download stuff with out my permission? What can I do to block the app. store on her itouch or stop her from being allowed to change the password?

Hide the App store via Restrictions. See:
iOS: Understanding Restrictions

I accessed the page protected by ADF security using direct url access attac

hi,
I played with my application which is based on SRDemo code (with added ADF security handling protection of resources) using direct url access scenarios. I was able to access a protected page as authenticated but not authorized user. I'll try to explain what I did.
There are two folders/web resources in my application, faces/folderA/* and faces/folderB/*.
roleA only is configured to access first web resource and the roleB is configured to access the second resource.
I used ADF security to authorize only roleA for page in folderA and to authorize only roleB for page in folderB.
I configured error pages in web.xml:
<error-page>
<error-code>400</error-code>
<location>faces/error/error400.jspx</location>
</error-page>
<error-page>
<error-code>401</error-code>
<location>faces/error/error401.jspx</location>
</error-page>
<error-page>
<error-code>403</error-code>
<location>faces/error/error403.jspx</location>
</error-page>
<error-page>
<error-code>404</error-code>
<location>faces/error/error404.jspx</location>
</error-page>
<error-page>
<exception-type>java.lang.Throwable</exception-type>
<location>faces/error/error500.jspx</location>
</error-page>
Other config params are:
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>infrastructure/ABLogin.jspx</form-login-page>
<form-error-page>faces/error/error401.jspx</form-error-page>
</form-login-config>
</login-config>
<security-constraint>
<web-resource-collection>
<web-resource-name>AB Prototype</web-resource-name>
<url-pattern>faces/ABAbout.jspx</url-pattern>
<url-pattern>faces/ABHelp.jspx</url-pattern>
<url-pattern>faces/ABLogout.jspx</url-pattern>
<url-pattern>faces/ABWelcome.jspx</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>A</role-name>
<role-name>B</role-name>
</auth-constraint>
</security-constraint>
<security-constraint>
<web-resource-collection>
<web-resource-name>AZone</web-resource-name>
<url-pattern>faces/folderA/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>A</role-name>
</auth-constraint>
</security-constraint>
<security-constraint>
<web-resource-collection>
<web-resource-name>BZone</web-resource-name>
<url-pattern>faces/folderB/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>B</role-name>
</auth-constraint>
</security-constraint>
<filter>
<filter-name>adfBindings</filter-name>
<filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
<init-param>
<param-name>unauthorizedErrorPage</param-name>
<param-value>faces/error/error401.jspx</param-value>
</init-param>
</filter>
<filter>
<filter-name>adfFaces</filter-name>
<filter-class>oracle.adf.view.faces.webapp.AdfFacesFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<url-pattern>*.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<url-pattern>*.jspx</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>adfFaces</filter-name>
<url-pattern>*.jsp</url-pattern>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
<dispatcher>ERROR</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>adfFaces</filter-name>
<url-pattern>*.jspx</url-pattern>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
<dispatcher>ERROR</dispatcher>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>adfAuthentication</servlet-name>
<servlet-class>oracle.adf.share.security.authentication.AuthenticationServlet</servlet-class>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
Once I authenticated as user in roleA I was trying to directly access URLs accessible only by users in roleB. In the beginning everything worked OK: I was dispatched to error401.jspx page with message Not authorized... etc.
But I kept trying to access different URLs, like http://localhost:8988/AB/faces, http://localhost:8988/AB/faces/folderB, http://localhost:8988/AB/faces/folderB/pageB.jspx, http://localhost:8988/AB
(not necessarily in that order, I played for a couple of minutes and the system would always dispatch to error401.jspx page if unauthorized attempt. But all of sudden, to my surprise, I got the pageB.jspx page while logged in as user belonging to roleA!)
Not sure how that happened but the connectedUser on pageB (#{userInfo.authenticated}) shows that I am logged in as user whose role is A.
I checked Authorization in ADF security and it is still correct: pageB is only accessible to roleB and pageA is only accessible to roleA.
I hope I made some stupid mistake in my configuration?

Hi,
ADF Security is JAAS permission based and not container managed. Note that unless you explicitly configured ADF Security you don't use ADF Security but container managed security, which is all that I can see in your configurations.
Not sure which version fo JDeveloper you use, but if you could change the following setting
<security-constraint>
<web-resource-collection>
<web-resource-name>AZone</web-resource-name>
<url-pattern>faces/folderA/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>A</role-name>
</auth-constraint>
</security-constraint>
<security-constraint>
<web-resource-collection>
<web-resource-name>BZone</web-resource-name>
<url-pattern>faces/folderB/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>B</role-name>
</auth-constraint>
</security-constraint>
to contain jspx file references instead of wildcards like in faces/folderB/* then what you see should no longer be possible. There was a known issue with the security settings in SRDemo that was caused by a defect in OC4J container managed security. I would expect this issue to be fixed in a more recent version of OC4J.
However, the work around until then is to protect all JSPX files in a directory instead of using wild card matches
Frank

HT204088 Using my ipad 3, with ios6, I can access the itunes store and the App store when I press the icons, but the viewing pages are blank. I can see the toolbars at the top and bottom. The pages are blank for every tab. Help. The ipad works fine, other

Using my ipad 3, with ios 6.0, I can access the itunes store and app store by pressing the icons, but the screens are all blank pages, I have tool bars at the top and bottom of the viewing screen, but when I touch the individual tabs, the viewing screen is either white or dark grey...nothing else appears. Help.

Having the same issue, can someone please enlighten us?

TS1424 I have downloaded a series of prison break but 3 episodes are saying "you do not have permission to access the requested resource" and "this episode can not be downloaded at this time" any idea how to fix this please??

I have downloaded a series of prison break but 3 episodes are saying "you do not have permission to access the requested resource" and "this episode can not be downloaded at this time" any idea how to fix this please??

I got this error with my iPad 3, my wife's iPhone 4, but not with my iPhone 4s.

I have some trouble with Safari! Everytime i google something, I expect safari to open the link i click in the same window and same tab - as it did before - but now it always opens a new tab! I'm getting really tired of that! So please help me!

I have some trouble with Safari!
Everytime i google something, I expect safari to open the link i click in the same window and same tab - as it did before - but now it always opens a new tab! I'm getting really tired of that! So please help me! I want safari to open the google search link in the same window and tab! How to fix that?
Please help me!!!
Thank you!

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

I am having the same problem I think. With mobileme you simply copy documents to the idisk folder and then synch. I cannot seem to sink that folder anymore. Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF file

I am having the same problem I think. With mobileme you simply copy documents to the idisk folder and then synch. I cannot seem to sink that folder anymore. Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF files on my iphone?

Apple never bopthered to explain that this would happen
Your iDisk is still accessible after moving to iCloud in exactly the same way as before. Nothing is deleted until June 30th 2012.
, so I could easily have lost ALL of the files I kept on iDisk.
No, you couldn't. Firstly, nothing was deleted from your iDisk. Secondly, any files stored on your iDisk should never be your only copy. Even if your iDisk spontaneously combusted, you should keep local backups elsewhere.
Does Apple WANT people to move their storage elsewhere and stop paying Apple for it?
Yes. Apple doesn't provide such a service anymore, nor are you paying them for it.
Apple has made no effort to suggest remedies for the problem it has given iDisk users
They've provided instructions on how to download your files from your iDisk. What you do with them after that is your choice.

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

Updated to firefox 4.0. since then my computer is very slow accessing the internet, websites and getting information from within a website.

Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
Many times I have to exit Firefox and re-enter it later to access the internet.
Please advice what I need to do to get back to the speed I had with the older version of Firefox.
Thank You,
Dennis

Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
Many times I have to exit Firefox and re-enter it later to access the internet.
Please advice what I need to do to get back to the speed I had with the older version of Firefox.
Thank You,
Dennis

My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Plea

My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Please help me. Some of the websites show thier icon normally.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3

Yes, it doesn't work. I ran in safe mode. nothing changed. I uninstalled Mozilla firefox with only standard removal, no change. I finally uninstalled Mozilla with complete removal and reinstalled it, then it return to normal. Why does this happen? Thanks for your reply.

Hi,I have made a new Apple ID and logged in on my phone, on settings, but the app store is still using my old one. How do I get rid of the old ID and replace it with the new one?

Hi, I have made a new Apple ID and logged in on my phone, settings > iTunes & app stores, but the app store is still using my old Apple ID. How do I get rid of the old ID and replace it with the new one?

HAYDONISRAD wrote:
... Maybe I'll stick with hers for now :-)
OR...
You could use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Ever since updating to IOS6 I cannot access the iTunes store and the App Store sends me to the China site.

Since updating my phone to IOS 6 I cannot access the itunes store and the app store sends me to the China one.
I am temporarily in China and have put a Chinese SIM in my phone. Is this why?

I have still got the problem, I have tried every thing suggested, I think it has something to go with my apple sign in, when signing in & putting in password it just goes grey as though I haven't signed in no error???. I can sign in to this forum with Apple ID, I am a beginner please any suggestions, I did try to make a new Apple ID, put in all detail credit card etc but I can not find it & no confirmation. IPad will be flying out of the window if I can't get it sorted.

I purchased a blu-ray of The Hunger Games and it came with a code for a digital copy. I redeemed the code on iTunes but the download has been continuing for 2 weeks now and it never finishes! The time just keeps going up. Never an issue in the past.

I purchased the blu-ray of The Hunger Games and it came with a code to redeem for a digital copy. I redeemed the code in iTunes and the movie downloaded fine, but the "EXTRAS" have been downloading for 2 weeks! Everytime I launch iTunes it starts the download again and the counter keeps going UP, at one point it said it would take 3 weeks. I have paused and restarted the download, I have deleted the download, nothing works to finish or stop this download! Does anyone have a clue what's up?

ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

Accessing the Permission,Properties and Subscription tab with Direct URL.

Similar Messages

Maybe you are looking for