Account assignment category not flowing to PR and PO in MTS

Dear All,
I am facing a problem in MIGO. When I enter the PO number, it says, PO has no selectable items.
When I consulted with MM consultant here he says the Account assignment category is not there in PO. And this has to flow in PR and PO when it is created.
The PR is cretaed by MRP run and the strategy used is 40.
Is this is the reason for error in MIGO? If yes where I do need to set this so that account assignment category will come in PR and hence in PO.
Please suggest.
Sumeet Vaidya

Hi,
Since the PO is not released , it is not allowing you to do MIGO.
Hope , there might be a Release Procedure / Release Strategy defined for the Purchase Order. So pls consult with your MM Consultant and get the PO released.
Then you will able to post the Goods Movements.
Regards,
Sheik
Edited by: sheik abdulla on Apr 17, 2008 6:00 PM

Similar Messages

Account assignment category for cost centre and statistical internal order

When issuing purchase order, we use account assignment category u2018Fu2019 for (PM) order, and u2018Ku2019 for cost centre. What account assignment category to use, when issuing purchase order, if we want to charge to both cost centre (as mandatory) and statistical internal order (as optional entry field)?
Do you create custom account assignment category for that purposes?
I reviewed Note 305385 but do not think it's relevant to us.

Hi Stacy
you can create a custom acct assgn category (AAC) in OME9... COPY the K to Z and make changes in it
However, I feel the Std AAC K should serve your purpose if you want to have Cost Ctr as mandatory and Order as Optional
Br, Ajay M

Exchange rate problem between GR&IR for PO with account assignment category

ear SAP experts.
We have used expense puchase order through account assignment category.
the cost object include cost center,sale order,order.because we dont use Fixed assets module in SAP,when purchase fixed assets,we also use account assignment category but no need to fill assets number(Not use account assignment category A).
the processing in current system when there is exchange rate difference between GR&IR as follows.
purchase order Currency :USD company code currency:HKD
example 1-- when something purchased into expense account,
Good receipt (1USD=7.75HKD)
Dr :expense account 100USD    775HKD
Cr: GR/IR        100USD    775HKD
Invoice receipt
Dr : GR/IR         100USD    775HKD
    Expense account            25HKD
CR: Vendor        100USD    800HKD
Example 2-- when something purchased into Fixed assets account,
purchase order :USD company code currency:HKD
Good receipt on Oct .01. 2007 (1USD=7.75HKD)
Dr :Fixed assets account 100USD    775HKD
Cr: GR/IR           100USD    775HKD
Invoice receipt on Dec.01.2007 (1USD= 8HKD)
Dr: GR/IR              100USD     775HKD
   Fixed assets account                25HKD
Cr: Vendor            100USD     780HKD
The fixed assets is depreciated from Nov,2007.
There is one problem that after the fixed assets is depreciated, the value for the fixed assets is added , the finance clerk have to adjust the added value from fixed assets account to Exchange Difference-Gain/Loss account by manual.
Our problem is
How to configure in order to make the exchage rate difference into Exchange Difference-Gain/Loss account for purchase order with account assignment category,not the original assigned account in purchase order item.
Many thanks
Fanny

Hi Fanny
Even though the question is bit unclear, I guess you are looking for the T-Code OBYC. Use transaction key KDM for configuring the exchange gain/loss
S Jayaram

Purchase order and Account assignement category- Change

hi.,
We are trying to receive the Purchase order of High value components into INVENTORY.
However, most of these Purchase Orders were created with account assignments.
Because of that, if we receives these POs, they will be consumed against the object identified in the account assignment.
Additionally, some of these have been invoiced already and would need to be backed out from the finance side.
Question: How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Invenotory.
Also, what are the other options ( FI will not open Previous period) so that the PO's which have been invoiced can be reversed against that AC assignment.
Thanks All

hi Rajesh.,
As mentioned earlier, these Purchase orders are STO's which have been already created and we are waiting to do the GR for the same. Items in the STO PO are of High value which we need to bring into INVENTORY.
But, because these STO PO's were created with account assignments, if we do GR now, they will be consumed against the object identified in the account assignment.
Some of these STO PO's have been invoiced already and FI has indicated that they could cancel the invoices for those STO PO's in previous posting period.
Question again : How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Inventory and not to a cost Center (202)
Step (1) Can we cancel the Invoiced items> reverse the GR for invoiced Items>reverse STO for PO ?
Step (2) Can we reverse the STO for PO for which GR has not been done? then
Step (3) Change the PO through ME22N, remove the Account assignment category?
Or how do we correct this situation for
(1) PO's already invoiced.
(2) PO for which GR has not been made. How can we receive them into Stock and not Cost center.
Anticipating a reply
Thanks
Sri

PO with account assignment category K and use two cost center

Dear Experts
When I create a PO with account assignment category K and use two cost center in the account assigment tab of PO with the same GL or with different GL in the both line item, The FI document does not get posted.
Any input on this please.
Regards
Paul

Hi,
Check in the PO document - Item level - Delivery tab
There are two indicators
1. Good receipt
2. GR non-valuated.
If you are giving only one cost centre, only GR check box active and GR non-valuated check box is in-active. That's why System creating FI document during GR.
If you are giving two cost centres, Both GR check box and GR non-valuated check box are active. That's why System is not creating any FI documents during GR.
Regards
Ravi

BAPI_PO_CREATE1 for blocked item and account assignment category Q

Hi,
I am facing an issue while creating PO with items which are blocked ie LOEKZ = 'S', and account assignment category 'Q'.
Though I fill wbs element in POACCOUNT and POACCOUNTX structures, after execution it is being erased and am getting an error: "Enter WBS Element" with an information message "Change G/L Account could not be effected".
Please help.
Thanks in advance.
Regards
Kalyani

Hi Ravi,
Below is the code:
POITEM-PO_ITEM = '00010'
POITEM-DELETE_IND = 'S'
POITEM-ACCTASSCAT = 'Q'
POACCOUNT-PO_ITEM = '00010'
POACCOUNT-SERIAL_NO = '01'
POACCOUNT-CO_AREA = '1000'
POACCOUNT-WBS_ELEMENT = 'XXXX'
I filled POITEMX, POACCOUNTX structures too.
When I dont pass POITEM-DELETE_IND = 'S', the PO is being created.
But my requirement is to make the item blocked.
Thanks in advance.
Regards
Kalyani

Define G/L Account for Product Category and Account Assignment Category

Hello Experts,
I got a requirment to make a new entry in below SPRO path.
Define G/L Account for Product Category and Account Assignment Category
*Individual entries cannot be put into the change request*
*Message no. SV141*
*Diagnosis*
*For technical reasons, the entries cannot be fully specified in the change request. There are two possible reasons for this:*
*1. The key of an entry is longer than 120 characters. All entries whose keys match up to character 119, are then copied into the change request, rather than an individual entry.*
*2. The key of an entry contains fields of special data types, for example, packed numbers. The key can only be specified in the change request up to the first such field from the left.*
*all entries whose keys match up to character 26 are copied into the change request, rather than a single entry.*
*System Response*
*The selected entry is copied into the change request correctly, but other entries may be copied as well.*
My question is, If I make one entry and move to Quality and production system will it move only one entry or whole table will move?
Kindly help me.
Thanking you
Regards
Sharan

I got the same message trying to make an entry in SPRO:
Define Backend System for Product Category
I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
Best regards,
Toni

Defining G/L Account for product category and account assignment category

We are using the standard configuration to default in a G/L account for a given product category and account assignment category combination. This works well for us when it comes to the shopping transactions (i.e. BBPSC01, BBPSC02, etc.), however we have a problem with this logic in the carry out sourcing transction BBPSOCO01. Our users are creating describe requirements which are then delivered to BBPSOCO01, however the user is not assigning the correct product category, so the sourcing department updates the cart with the correct product category. Upon doing so, the G/L account gets changed to whatever the V_BBP_DET_ACCT table determines is correct for that given product category/account assignment combination. We would like to know if their is a way to not fire the "default G/L account determination" when the shopping cart is changed in transaction BBPSOCO01. I already know about the BBP_DETERMINE_ACCT BADI but thought there might be a less expensive alternative. Our business treats the G/L account provided by the configuration as a guideline, therefore when the buyer changes the product category they also want to retain the account assignment information. Any suggesstions on how this might be accomplished outside of creating my own logic in the BADI?
Best regards,
Shawn O'Connor

I got the same message trying to make an entry in SPRO:
Define Backend System for Product Category
I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
Best regards,
Toni

Sales account assigned PR not showing account assignment category E

Hi,
I have created a sales order and ran MRP for the material but I am not getting E as account assignment category automatically.
Please guide where I am missing.
Regards,
Manoj

Hi Manoj,
You enter the Item Category and Accout.***.Cat at the below path when PR is cretaed for a Sales ORder.
You define the SPRO Sales and DistributionSales DocumentsSchedule LinesDefine Schedule Line Categories
Eg :CS - Click on It.
Regards
Ramesh Ch

Account assignment Category is not popping up for one User

User is trying to create the SC, but there is no Account assignment category( Cost center, WBS) being displayed when I try to search the Acc assignment category, it gives the results without any values. There is no values for Category field for the SC cart.
I verified the attributes for me and user, everything looks same.
Please advise.
Thanks & Regards
Sada

Hi
Seems like there is a bug in the System.
Are you talking of customer fields / standard fields - search help ?
Account assignment search help in SC.
User must have should the authorization object MBBP_SHLP assigned in attributes (SU01 transaction)._
Re: Blank account assignment in plan-driven scenario
Meanwhile, try these SAP OSS notes and links ->
Note 739509 BBPPO01: SEARCH FOR ACCOUNT ASSIGNMENT CATEGORY DOESN'T WORK
Note 746788 - Back-end system search help for cost center
Note 656633 - Search help requires dialog users
Note 907016 - Error when you select search help
Re: Search help for Acct Assignment not working
Also ensure, proper authorization objects are provided by BASIS team.
Let me know incase you need any assistance.
Incase nothing helps, You need to raise an OSS message with SAP on this.
Regards
- Atul

What is the differences between the account assignment category of E and M?

Hi, I have a question about account assignment category.I hope someone give me the answer , and I would appreciate it.
    as you know, there are so many account assignment categories (e.g. A:asset,K:cost center)in sap customizing,when we want to purchase asset, we will input A to the field of account assignment category in purchase order.
     When will we input E or M in purchase order? What will it imply when we input E or M in purchase order? What is the differences between the account assignment category of E and M?
Best Regards
Bob Wang

Vijay,Thanks for your answer,but I am still not clear about it,I have a instance to describe my question at detail.
    If there is a final product A, and the planning strategy for A is 20(MTO), the procurement type of A is F(external procurement) at the view mrp2 in the material master datas.
step1: I creat a sales order.
step2: run MRP for A.
step3: transfer the purchase requistion into a purchase order,and the field of acc.***.cat. in the purchase order will be filled out M automatically, because the acc.***.cat. in the planning strategy 20(MTO) is set with E.
    Well, the purchase order is created, what is the relationship between the sales order and the purchase order? What will be happened about costing between the SO and the PO?
    If I delete the E, I make the PO become a standard PO, what is difference between standard PO and the PO including E?
Best Regards
Bob

Item category and Account assignment category field grayed out in PR/PO

Hello all,
While making a PR/PO we use both the item category and account assignment category. However, after saving the PR/PO, when i try to change the fields through ME22N/ME52N, the fields are greyed out. I dont think this can be controlled through the layout screen.
Is there anyway the fields can be made modifiable in ME22N/ME52N ?
Please help!
regards,
Soumyadeep.

Hi,
Well, actually you can control the Field settings in customization of Document Type. Check the following :
Go to SPRO>MM>Purchasing>Purchase Order>Define screen layout at document level
Click on the desired Document Type and see if the Field selection for Item Cat and Acct Assignment is checked for Display for that Document Type. If it is then change it to Optional.
Now, Go to SPRO>MM>Purchasing>Purchase Order>Define Document Type and see if the Field Selection Key is assigned to the (Updated just now) document Screen layout.
Hope this helps,
Best regards
Amit Bakshi

Account assignment category Q and G/L account mapping during purchase order

Hi,
When we procure stock for account assignment category Q,then it will trigger G/L Account
Please can any one tell me where it will maintained

Hi,
If you select Account Assignment Category as "Q" then the time of GR, it will post the Materials received value to stock account and will update stock of material against the Project.
In OME9, here for Account Assignment Category "Q", check field Consumption posting has value as "P" (Accounting via project), that means stock account will get determined from OBYC for Account Key BSX

A rlist of purchase orders with Account assign.category "A" and .....

Hi All,
Could anyone show me a transaction code which shows
the list of purchase orders
- without good receipt and
- with Account assignment category "A".
Tnaks
A lot
G.ROssi

hi,
Go to ME2N >> use selection parameter field >> here assign the value ie. NO gr done >> come out...
then maintain the dynamic selection and in the PO item details maintain the acc. assgn catagory and then execute..
System will show all PO's for which no GR is done...
Regards
Priyanka.P

Account assignment category F not showing in PR & PO for stock material.

Dear All,
I have created one breakdown maintenance order in that i have planned one stock (L) material, for this reservation is created.
Then i have run mrp by using tcode md03 for that material.......pr is generated.
Now when i am going to convert this pr into po, system dosen't show account assignment category for this pr as "F"
Also when i see in change pr tcode me52n.........._system dosen't show account assignment category as "F"_
Actually system must show account assignment cateory as* "F" in pr & while converting pr to po.*
How i can resolved this issue. Any config setting is to be done kindly give the step by step procedure.
Thanks & Regards,
Sandeep

Hi,
When you select L stock Item that means the material will come under stock at stores. And then goods issue will be done against your reservation.
Coming to account assigned PR as F order then when GR is done agaist PO the material is directley isued to the order. From MRP system only checks agaist that material what the requirement and what is available stock, if short fall exists then it will generate PR with out any account assignment based on material master setting.
For ex if for the same material requirement has come from 4 orders then which order no system will consider to generate a PR.
Hope it is helpful.
Regards,
N.Nagaraju

Account assignment category not flowing to PR and PO in MTS

Similar Messages

Maybe you are looking for