BAPI_PO_CREATE1 for blocked item and account assignment category Q

Hi,
I am facing an issue while creating PO with items which are blocked ie LOEKZ = 'S', and account assignment category 'Q'.
Though I fill wbs element in POACCOUNT and POACCOUNTX structures, after execution it is being erased and am getting an error: "Enter WBS Element" with an information message "Change G/L Account could not be effected".
Please help.
Thanks in advance.
Regards
Kalyani

Hi Ravi,
Below is the code:
POITEM-PO_ITEM = '00010'
POITEM-DELETE_IND = 'S'
POITEM-ACCTASSCAT = 'Q'
POACCOUNT-PO_ITEM = '00010'
POACCOUNT-SERIAL_NO = '01'
POACCOUNT-CO_AREA = '1000'
POACCOUNT-WBS_ELEMENT = 'XXXX'
I filled POITEMX, POACCOUNTX structures too.
When I dont pass POITEM-DELETE_IND = 'S', the PO is being created.
But my requirement is to make the item blocked.
Thanks in advance.
Regards
Kalyani

Similar Messages

GR going to wrong GL account for PO Item with Account Assignment Category M

Hi Experts,
I need some help on GR posting for PO Item with M as AAC.
PO1 for material ABC with M as Account Assignment Category, when I book GR for this Item, the GL document generated as below.
Dr: PRD (Cost Price Differences)
Cr: WRX (GR/IR)
The material ABC price control is "S" and already have standard cost.
For another material DEF which have ascetically same master data as ABC and got a similar PO2 with M as Account Assignment Category.
But the GR document as below.
Dr: BSX (Inventory)
Cr: WRX (GR/IR)
How can be one same setting got so different results, is there any data in Material or PO make these differences?
Actually the results for material DEF is what we want, how could I avoid the GR results for material ABC.
Thanks~

Thanks you Mukthar,
I have checked all the information and porcess for both material and did a lot of testing in testing system.
Here is what I found.
Case
Material ABC SO: 1111 PO: 6666 (ACC:M)
Material DEF SO:2222 PO: 7777(ACC:M)
All the information in material mast data, SO, PO are the same.
The differences is that:
PO:6666 post GR before Material ABC's standard price release. So the first GR document as below
Dr: PRD (Cost Price Differences)
Cr: WRX (GR/IR)
This is correct document without material stand cost.
The problem we reverse the fist GR document, release standard cost for Material ABC. Then re-do the GR. but the GL document still book into PRD instead of BSX.
If I create a new SO:3333 and PO:8888 (with ACC M) for material ABC now.
The GR could be book into BSX.
It seem like once the PO got GR with 0 standard cost, even I relesed a new price for the material and re do the GR, it still take the previous 0 cost to book inventory which make all the amount into PRD.
Quite Strange

Item category and Account assignment category field grayed out in PR/PO

Hello all,
While making a PR/PO we use both the item category and account assignment category. However, after saving the PR/PO, when i try to change the fields through ME22N/ME52N, the fields are greyed out. I dont think this can be controlled through the layout screen.
Is there anyway the fields can be made modifiable in ME22N/ME52N ?
Please help!
regards,
Soumyadeep.

Hi,
Well, actually you can control the Field settings in customization of Document Type. Check the following :
Go to SPRO>MM>Purchasing>Purchase Order>Define screen layout at document level
Click on the desired Document Type and see if the Field selection for Item Cat and Acct Assignment is checked for Display for that Document Type. If it is then change it to Optional.
Now, Go to SPRO>MM>Purchasing>Purchase Order>Define Document Type and see if the Field Selection Key is assigned to the (Updated just now) document Screen layout.
Hope this helps,
Best regards
Amit Bakshi

Define G/L Account for Product Category and Account Assignment Category

Hello Experts,
I got a requirment to make a new entry in below SPRO path.
Define G/L Account for Product Category and Account Assignment Category
*Individual entries cannot be put into the change request*
*Message no. SV141*
*Diagnosis*
*For technical reasons, the entries cannot be fully specified in the change request. There are two possible reasons for this:*
*1. The key of an entry is longer than 120 characters. All entries whose keys match up to character 119, are then copied into the change request, rather than an individual entry.*
*2. The key of an entry contains fields of special data types, for example, packed numbers. The key can only be specified in the change request up to the first such field from the left.*
*all entries whose keys match up to character 26 are copied into the change request, rather than a single entry.*
*System Response*
*The selected entry is copied into the change request correctly, but other entries may be copied as well.*
My question is, If I make one entry and move to Quality and production system will it move only one entry or whole table will move?
Kindly help me.
Thanking you
Regards
Sharan

I got the same message trying to make an entry in SPRO:
Define Backend System for Product Category
I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
Best regards,
Toni

Defining G/L Account for product category and account assignment category

We are using the standard configuration to default in a G/L account for a given product category and account assignment category combination. This works well for us when it comes to the shopping transactions (i.e. BBPSC01, BBPSC02, etc.), however we have a problem with this logic in the carry out sourcing transction BBPSOCO01. Our users are creating describe requirements which are then delivered to BBPSOCO01, however the user is not assigning the correct product category, so the sourcing department updates the cart with the correct product category. Upon doing so, the G/L account gets changed to whatever the V_BBP_DET_ACCT table determines is correct for that given product category/account assignment combination. We would like to know if their is a way to not fire the "default G/L account determination" when the shopping cart is changed in transaction BBPSOCO01. I already know about the BBP_DETERMINE_ACCT BADI but thought there might be a less expensive alternative. Our business treats the G/L account provided by the configuration as a guideline, therefore when the buyer changes the product category they also want to retain the account assignment information. Any suggesstions on how this might be accomplished outside of creating my own logic in the BADI?
Best regards,
Shawn O'Connor

I got the same message trying to make an entry in SPRO:
Define Backend System for Product Category
I found the note 305942 describing exactly the issue for my and above mentioned entry, which offers the correction, then the note 326802 which offers the correction of the first notes. However, both notes are for Releases 4.6C and D (from 2000), and we are using EHP2 FOR SAP SRM 7.0.
I see another discussions in SCN regarding this topic, but haven't found real solution yet. Any hints? At least the answer to previous question from Sharan would be appreciated.
Best regards,
Toni

SC with combination of Limit and account assignment category as unknown(U)

Hi,
We are at SRM 5.5, Please let me know is it possible to create SC with combination of Limit and account assignment category as unknown(U) then PO with same combination and distrribution of cost to different cost centers at the time of confirmation from SRM side.
Please guide me processs of the same in steps
Many Thanks,
Venkat

It is for Extended Classic scenario

Invoice verification for blanket PO with account assignment category U (un

Hi all
While doing miro when i am doing invoice verification for blanket PO with account assignment category U (unknown) system is not allowing me to enter the GL it is disable,wat can be the possible reason
Regards
shailesh

Hi Shailesh,
As you have maintained the account assignment category as U the account assignment tab will not be available. If you want to enter a GL account then use the Account assignments K or F or X.
Else if you want to use U in PO then you can give the GL account and other account assignment details only in the Invoice verification.
Regards,
Kathir

Exact difference between Item category and Account assignment category

Can anyone plz give the exact difference between account assignment category and Item category
Thanks inadvance

Hi,
Account Assignment Category: Key indicating whether an item is to be assigned to an auxiliary account (such as a cost center). The account assignment category determines which account assignment data (e.g. cost center, account number, etc.) is required for the item.
Item category: Identifier indicating the characteristics of an item. The item category determines whether the following are necessary or allowed with regard to an item:
Material number, Additional account assignment, Inventory management in the R/3 System, Goods receipt, Invoice receipt.
Prase

Purchase order and Account assignement category- Change

hi.,
We are trying to receive the Purchase order of High value components into INVENTORY.
However, most of these Purchase Orders were created with account assignments.
Because of that, if we receives these POs, they will be consumed against the object identified in the account assignment.
Additionally, some of these have been invoiced already and would need to be backed out from the finance side.
Question: How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Invenotory.
Also, what are the other options ( FI will not open Previous period) so that the PO's which have been invoiced can be reversed against that AC assignment.
Thanks All

hi Rajesh.,
As mentioned earlier, these Purchase orders are STO's which have been already created and we are waiting to do the GR for the same. Items in the STO PO are of High value which we need to bring into INVENTORY.
But, because these STO PO's were created with account assignments, if we do GR now, they will be consumed against the object identified in the account assignment.
Some of these STO PO's have been invoiced already and FI has indicated that they could cancel the invoices for those STO PO's in previous posting period.
Question again : How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Inventory and not to a cost Center (202)
Step (1) Can we cancel the Invoiced items> reverse the GR for invoiced Items>reverse STO for PO ?
Step (2) Can we reverse the STO for PO for which GR has not been done? then
Step (3) Change the PO through ME22N, remove the Account assignment category?
Or how do we correct this situation for
(1) PO's already invoiced.
(2) PO for which GR has not been made. How can we receive them into Stock and not Cost center.
Anticipating a reply
Thanks
Sri

Need table name for Output Types and Account Assignment Types

Hi
pl let me know the table name for
1. Account Assignment Type
2. Output Types (All)
I need to download some company code specific data for both
Pl confirm
Warm Regards
Vikcy

Hi Thanks for reply
You mean to say that Account Assignment Types = Account Assignment Category ????
Secondly In Table NAST, i can not see field "Output Type"
Pl confirm once which field give me company code specific "Output Type" data
Regards
Vicky

Table Control Variant For ME21N - Item level - account assignment tab.

Dear All,
I want to change Table Control Screen that is in Me21n(Service PO)>Item level> Account Assignment tab -> Table control.
In that table control i want to add one column Name is OrderNo(AUFNR) ,but system is not changing the table control.
When i m going to change table control scrren in ---> Condition tab its working fine but not for above case.
Please guide me to solve this issue.
Regards,
Sanket.

Please provide the solution.
Regards,
Sanket.

Receipt process for damaged items when account assignment exists

HOwdy all,
Assume we have a PO for 100 items at $x. The PO is account assigned to an order (work order, production order etc).
When we are doing the receipt step, we find that 50 of the items are damaged. What is the normal process in SAP for this. I know for stock (i..e no account assignment) that we would receipt into GR - Blocked Stock. However, when receipting for an item with an account assignment this does not appear possible - is this true?
YOur best suggestions appreciated...

Returns PO is required when the PO against which the material was initially received is closed. Means PO qty equal to GR qty equal to IR qty and payment is already made but later it is found that some material is not as per required quality and vendor is agreeing to replace the material. then a seperate returns PO is required as you cannot return with reference to the original PO.

Defalting Account assignment category for PRs

Hi,
How do I configure to have automatically default a u201CAccount assignment categoryu201D depending on PR document type, so the user cannot change/enter Account assignment categoryu201D .
For example if the PR type is u201CService PRu201D, all line items must have the u201CAccount assignment categoryu201D as u2018Ku2019 and if the PR type is u201CCapital PRu201D the u201CAccount assignment categoryu201D must always be u2018Au2019

Hi there,
There is no direct way to link document type and account assignment category.
But you can try this which is close.
--> One is through Personal setting in PO screen.
Can be done at Personal Setting TAB in application toolbar( extreme right side) in the PO (ME21N) screen.
Click default value
PO header , enter your PO document type &
PO item, enter acc. ***. Cat. K
& Save.
The other way is controlling through the item category, maintain only one account assignment category for your item category in SPRO > Materials Management > Purchasing > Account Assignment > Define combination of item category/account assignment category.
Regards,
Senthil

Change account assignment category for services with ME22N

Dear guru ,
i have created a purchase order for a position with item category D(service) and account assignment category K(cost centre). I have inserted for the accounting view the cost center.
After the saving If I a try to change the purchase order position with ME22N the system donu2019t allow to change the account assignment category (F order instead of K).
I have verified that for other positions with account assignment category K(cost centre) but for Item category blank(standard) the system allow to change the account assignment category if not exist goods receipt or invoice.
Whatu2019s the problem about services ?
Thanks

Hi,
Usually the Account assigned PO's are fixed with Account assignment, you cann't modify the account assignment once it is saved.
It depends on the IMG settings for Account assignment category.
Check the following IMG Settings
SPROMMPurchasingAccount assignment-Maintain account assignment categories
Here check for "K" --Costcentre in the detailed information if the checkbox at Acct assignment changable then only you can modify the Account assignment category modification in PO, otherwise not possible.
rgds
gsc

Account assignment category for Service Confirmations

Hi,
We are on SRM_SERVER 550, SP11, SAP 4.7 backend.
While performing Service confirmations in SRM, the Account assignment category defaulted is different from that mentioned in shopping cart.
for e.g. If I create a shopping cart for a Service item with Account assignment category as "K - Expense" and on creation of PO when I try doing confirmation, the Account assignment category defaulted is for "Asset - Z", on the confirmation screen.
Please let me know how this issue can be resolved.
Note: In SRM PO and R/3 PO, the Account assignment category displayed is "K", same as that mentioned in shopping cart.
Thanks,
Kiran

Yes, Requester can change the Accunt assignment category. But in our scenario, we need to display the same Accunt assignment category as that in shopping cart, as Requester/Central Recipient will do the confirmation directly without changing the Accunt assignment category, similar to Goods confirmation.
The issue is: How do we default the same Accunt assignment category in the Confirmation screen, which is present in shopping cart.

BAPI_PO_CREATE1 for blocked item and account assignment category Q

Similar Messages

Maybe you are looking for