Account Information getting Saved Automatically

Experts,
I am making following transactions in CRM 2007 Interaction Center (B2C profile):
- Search Account
- Confirm Account
- Click in EDIT button
- Change some information (only CHANGE, not SAVING)
- CLICK ON END Button
I am not saving my changes and ending the call but still any changes made to the account are getting saved.
Any pointers will be greatly appreciated.
Thanks
Daljit

Hi,
Please note clicking on "END" button results in default saving of all the open objects. In your case since you have edited the account information and clicked on "End" button it by default saves the acccount changes. This is a standard behavior.
Regards,
Deepak

Similar Messages

Don´t RAWS, which are saved as smartobjects get saved automaticly?

Hi, now in english:
I´m working with CS4 on a mac.
I have a problem: I´m using several CR2-files composed as smart objects in one big psb-file.
After getting along for such a while with that technique I get the Error
photoshop smart object parseThe original Smartobject could not been edited because no parser or file format could open the file' (my translation)
I´m afraid of losing all which I worked on the files...
Some days ago I deleted the cache of Camera Raw, is this a possible problem?
Because sometimes while using CR PS shut down...
Do I have to save these files?
Help!!!
Thank you

Hi Jason,
I have tested in my lab, and got same result with you. below is my test and results.
1. log on with user1>> click "IE" and select "Run as different user">> type user2's credential >>change proxy, click "OK". open "internet option" again, the change was not saved.
2. log on with user2, check proxy in IE, the change was not saved.
Then I tested on "Home Page", zone settings, , I found the changes can be saved.
I have done further test on other applications, such as notepad (enable/disable status base), calculator (View >> standard/scientific/programmer/statistics), the change can be save from "Run as different user".
since this is a behavior of IE, I suggest you submit a post in IE forum and IE experts may give you explanation on that.
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Account APPLSYS gets locked automatically

hi ,
i recently upgraded my test instance to oracle 10g (10.2.0.4) from9.2.0.5 , my EBS version is 11.5.10 , OS is HP UX 11.11
whenver i give wrong password for applsys in adadmin , APPLSYS gets locked , how do i increase number of attempts for failed logins??

Please follow the steps in the following note, and see if it helps in resolving the issue.
Note: 420001.1 - adpatch Ora-28000 Account Locked apps
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=420001.1
If the above note does not help, review the following note:
Note: 352389.1 - Finding the source of failed login attempts
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=352389.1

Line item is not getting saved automatically

Hi experts,
                 I have written below bdc program for Tcode cs01.
REPORT ZM_BDC_CSO1
       NO STANDARD PAGE HEADING LINE-SIZE 255.
TYPE-POOLS: TRUXS.
TYPE-POOLS: SLIS.
CONSTANTS C_X(1) TYPE C VALUE 'X'.
DATA: GT_HEADERT TYPE SLIS_T_LISTHEADER,
      GS_HEADERT TYPE SLIS_LISTHEADER.
DATA : FNAME TYPE STRING.
DATA : WLV_FILE TYPE RLGRAP-FILENAME.
*DATA : WT_TEST LIKE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
DATA : T_INTERN TYPE STANDARD TABLE OF ALSMEX_TABLINE,
       W_INTERN TYPE ALSMEX_TABLINE.
TYPES : BEGIN OF X_MAT,
             MATNR(18) TYPE C,
             PLANT(4) TYPE C,
             BOM_USAGE TYPE STLAN,
        END OF X_MAT.
TYPES : BEGIN OF X_BOM,
             MATNR1(18) TYPE C,
             ITM_NO(4) TYPE C,
             ITM_CAT(1) TYPE C,
             BOM_COMP(18) TYPE C,
             QTY(18) TYPE C,
        END OF X_BOM.
DATA : T_MAT TYPE STANDARD TABLE OF X_MAT,
       W_MAT TYPE X_MAT.
DATA : T_BOM TYPE STANDARD TABLE OF X_BOM,
       W_BOM TYPE X_BOM.
DATA :   FNAM(30) TYPE C.
DATA : CNT TYPE STRING,
        VAR(2) TYPE C .
DATA : INI TYPE C VALUE '0' .
DATA: NEW_MARK TYPE BDCDATA-FNAM.
DATA: COUNTER TYPE I.
DATA : ITEM_NO(4) TYPE N.
DATA : IDXL TYPE SY-TABIX.
DATA : GV_PFILE TYPE STRING.
DATA : GV_RAW TYPE TRUXS_T_TEXT_DATA.
DATA : GV_FILE TYPE RLGRAP-FILENAME,
       GV_FLAG(1) TYPE C.
DATA : GW_BDCDATA TYPE BDCDATA,
       GT_BDCDATA TYPE STANDARD TABLE OF BDCDATA.
DATA: GS_RETURN TYPE YV_MESSAGES,
      GT_RETURN TYPE STANDARD TABLE OF YV_MESSAGES.
DATA: GV_MTEXT TYPE STRING.
DATA: GW_FIELDCAT        TYPE SLIS_FIELDCAT_ALV,
      GT_HEADERFIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_PATH TYPE RLGRAP-FILENAME,
             P_MODE TYPE CTU_PARAMS-DISMODE DEFAULT 'A'.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PATH.
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
   IMPORTING
     FILE_NAME           = P_PATH .
INITIALIZATION.
REFRESH: T_MAT, T_BOM,T_INTERN.
CLEAR: W_MAT,W_BOM,W_INTERN,IDN,FLAG.
*DATA : T_INTERN TYPE STANDARD TABLE OF ALSMEX_TABLINE.
START-OF-SELECTION.
PERFORM UPLOAD_FILES.
PERFORM BOM_UPLOAD.
PERFORM ITEM_DATA.
PERFORM DISPLAY_LOG.
*&      Form BOM_UPLOAD
      text
--> p1        text
<-- p2        text
FORM BOM_UPLOAD.
SORT T_INTERN BY ROW COL.
LOOP AT T_INTERN INTO W_INTERN.
    CASE W_INTERN-COL.
      WHEN 1.
        W_MAT-MATNR = W_INTERN-VALUE.
        W_BOM-MATNR1 = W_INTERN-VALUE.
      WHEN 2.
    W_BOM-PLANT = W_INTERN-VALUE.
        W_MAT-PLANT = W_INTERN-VALUE.
      WHEN 3.
    W_BOM-BOM_USAGE = W_INTERN-VALUE.
        W_MAT-BOM_USAGE = W_INTERN-VALUE.
      WHEN 4.
        W_BOM-ITM_NO = W_INTERN-VALUE.
      WHEN 5.
        W_BOM-ITM_CAT = W_INTERN-VALUE.
      WHEN 6.
        W_BOM-BOM_COMP = W_INTERN-VALUE.
      WHEN 7.
        W_BOM-QTY = W_INTERN-VALUE.
    ENDCASE.
    AT END OF ROW.
      APPEND W_BOM TO T_BOM.
      APPEND W_MAT TO T_MAT.
      CLEAR : W_BOM, W_MAT.
    ENDAT.
ENDLOOP.
ENDFORM.                    " BOM_UPLOAD
*&      Form ITEM_DATA
      text
--> p1        text
<-- p2        text
FORM ITEM_DATA.
DATA : INT TYPE I.
DELETE ADJACENT DUPLICATES FROM T_MAT COMPARING MATNR.
SORT T_MAT BY MATNR. "HEADER DATA
SORT T_BOM BY MATNR1. "ITEM DATA
*CLEAR : COUNTER, ITEM_NO.
*break naresh.
LOOP AT T_MAT INTO W_MAT.
    REFRESH GT_BDCDATA.
    CLEAR   GW_BDCDATA.
    PERFORM HEADER_DETAILS.
    LOOP AT T_BOM INTO W_BOM WHERE MATNR1 = W_MAT-MATNR.
      CNT = CNT + 1.
      if CNT LE 9.
      CONCATENATE '0' CNT INTO VAR.
      ELSE.
      VAR = CNT.
      ENDIF.
      ADD 1 TO COUNTER.
      ITEM_NO = 10 * COUNTER.
      OVERLAY ITEM_NO WITH '0000'.
      W_BOM-ITM_NO = ITEM_NO.
      PERFORM ITEMSET1.
      CLEAR VAR.
      PERFORM SCREEN1.
    ENDLOOP.
    CLEAR V_CNT.
    PERFORM SCREEN_DATA.
ENDLOOP.
ENDFORM.                    " ITEM_DATA
*&      Form HEADER_DETAILS
      text
--> p1        text
<-- p2        text
FORM HEADER_DETAILS.
PERFORM BDC_DYNPRO      USING 'SAPLCSDI' '0100'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                'RC29N-STLAN'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
PERFORM BDC_FIELD       USING 'RC29N-MATNR' W_MAT-MATNR.
                             'lejn44001'.
PERFORM BDC_FIELD       USING 'RC29N-WERKS' W_MAT-PLANT.
                             '4600'.
PERFORM BDC_FIELD       USING 'RC29N-STLAN' W_MAT-BOM_USAGE.
                             '1'.
PERFORM BDC_FIELD       USING 'RC29N-STLAN' '1'."W_MAT-BOM_USAGE.
                             '1'.
*perform bdc_field       using 'RC29N-DATUV'
                             '22.06.2010'.
PERFORM BDC_DYNPRO      USING 'SAPLCSDI' '0110'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
PERFORM BDC_FIELD       USING 'RC29K-BMENG'
                                '1'.
PERFORM BDC_FIELD       USING 'RC29K-STLST'
                                '1'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                'RC29K-EXSTL'.
PERFORM BDC_DYNPRO      USING 'SAPLCSDI' '0111'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                'RC29K-LABOR'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
ENDFORM.                    " HEADER_DETAILS
FORM UPLOAD_FILES.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      FILENAME                      = P_PATH
      I_BEGIN_COL                   = 1
      I_BEGIN_ROW                   = 2
      I_END_COL                     = 7
      I_END_ROW                     = 100
    TABLES
      INTERN                        = T_INTERN
EXCEPTIONS
INCONSISTENT_PARAMETERS       = 1
UPLOAD_OLE                    = 2
OTHERS                        = 3
IF SY-SUBRC <> 0.
    WRITE 'Path of Excel file is not correct'.
    EXIT.
ENDIF.
ENDFORM.                    " UPLOAD_FILES
FORM DISPLAY_LOG.
DATA: LV_LAYOUT TYPE SLIS_LAYOUT_ALV.
Design the layout
LV_LAYOUT-ZEBRA = C_X. " alternative coloured lines
LV_LAYOUT-COLWIDTH_OPTIMIZE = C_X. " Optimized column width
Delete all warning messages
DELETE IT_return WHERE Mtype = 'W' or Mtype = 'I'.
Build Field Catalog
PERFORM BUILD_FIELD_CATALOG.
Display Log details
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM     = SY-CPROG
            I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
            IS_LAYOUT              = LV_LAYOUT
            IT_FIELDCAT            = GT_HEADERFIELDCAT[]
       TABLES
            T_OUTTAB               = GT_RETURN[]
       EXCEPTIONS
            PROGRAM_ERROR          = 1
            OTHERS                 = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. "SY-SUBRC <> 0.
REFRESH GT_HEADERT.
CLEAR   GS_HEADERT.
ENDFORM.                    " DISPLAY_LOG
FORM BUILD_FIELD_CATALOG.
ENDFORM.                    " BUILD_FIELD_CATALOG
FORM BDC_DYNPRO USING PROGRAM TYPE SY-REPID DYNPRO TYPE SY-DYNNR.
CLEAR GW_BDCDATA.
GW_BDCDATA-PROGRAM = PROGRAM.
GW_BDCDATA-DYNPRO   = DYNPRO.
GW_BDCDATA-DYNBEGIN = 'X'.
APPEND GW_BDCDATA TO GT_BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM TYPE ANY FVAL TYPE ANY.
IF FVAL <> ''.
    CLEAR GW_BDCDATA.
    GW_BDCDATA-FNAM = FNAM.
    GW_BDCDATA-FVAL = FVAL.
    APPEND GW_BDCDATA TO GT_BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD
FORM ITEMSET1.
*cnt = '(01)'.
*************commented******************
PERFORM BDC_DYNPRO      USING 'SAPLCSDI' '0140'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                'RC29P-POSTP(03)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
**********28.06.2010**********************
CONCATENATE 'RC29P-IDNRK(' VAR ')' INTO NEW_MARK.
PERFORM BDC_FIELD USING NEW_MARK W_BOM-BOM_COMP.
CLEAR NEW_MARK.
*perform bdc_field       using 'RC29P-IDNRK(cnt)' W_BOM-BOM_COMP.
                             'purchasecost'.
*perform bdc_field       using 'RC29P-MENGE(01)' W_BOM-QTY.
                             '20'.
CONCATENATE 'RC29P-MENGE(' VAR ')' INTO NEW_MARK.
PERFORM BDC_FIELD USING NEW_MARK W_BOM-QTY.
CLEAR NEW_MARK.
*perform bdc_field       using 'RC29P-POSTP(VAR)' W_BOM-ITM_CAT.
                             'Z'.
CONCATENATE 'RC29P-POSTP(' VAR ')' INTO NEW_MARK.
PERFORM BDC_FIELD USING NEW_MARK W_BOM-ITM_CAT.
CLEAR NEW_MARK.
********************************28.06.2010************
*perform bdc_dynpro      using 'SAPLCSDI' '0130'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'BDC_CURSOR'
                             'RC29P-POSNR'.
*perform bdc_field       using 'RC29P-POSNR' W_BOM-ITM_NO.
                             '0010'.
*perform bdc_dynpro      using 'SAPLCSDI' '0131'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'BDC_CURSOR'
                             'RC29P-POTX1'.
*perform bdc_field       using 'RC29P-SANKA'
                             'X'.
*perform bdc_dynpro      using 'SAPLCSDI' '0140'.
*perform bdc_field       using 'BDC_CURSOR'
                             'RC29P-POSNR(01)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '=FCBU'.
ENDFORM.                                                    " itemset1
*&      Form screen_data
      text
--> p1        text
<-- p2        text
FORM SCREEN_DATA.
CALL TRANSACTION 'CS01' USING GT_BDCDATA MODE P_MODE UPDATE 'S'
                                     MESSAGES INTO GT_MESSAGES .
ENDFORM.                    " screen_data
*&      Form SCREEN1
      text
--> p1        text
<-- p2        text
FORM SCREEN1.
PERFORM BDC_DYNPRO      USING 'SAPLCSDI' '0130'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                'RC29P-POSNR'.
PERFORM BDC_FIELD       USING 'RC29P-POSNR' W_BOM-ITM_NO.
                             '0010'.
PERFORM BDC_FIELD       USING 'RC29P-IDNRK' W_BOM-BOM_COMP.
                             'PURCHASECOST'.
PERFORM BDC_FIELD       USING 'RC29P-MENGE' W_BOM-QTY.
                             '20'.
PERFORM BDC_FIELD       USING 'RC29P-MEINS'
                                'M'.
PERFORM BDC_DYNPRO      USING 'SAPLCSDI' '0131'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                'RC29P-POTX1'.
PERFORM BDC_FIELD       USING 'RC29P-SANKA'
                                'X'.
ENDFORM.                                                    " SCREEN1
evrything is working fine. but after processing the line items for one material no. i need to save it manually then it goes back to initial screen and process takes place for the subsequesnt material no.
e.g
Material             BOM component   QUANTITY
LEJN2689     PURCHASECOST     500
LEJN2689     SOURCINGCOST
LEJN2689     INVRESERVE
LEJN2690     PURCHASECOST     600
LEJN2690     SOURCINGCOST
LEJN2690     INVRESERVE
the above is the file type i am providing.
for material LEJN2689 the component and quantity is uploaded but i have to click on 'save' button manuaaly then cursor goes back to initial screen for material LEJN2690.
plz help.
Regards,
Ashmita Singh

solved it!!!

Copying from client through se71 is getting saved as local object only?

hi.
i am copying the form from std to z form through se71.but after doing copy from client,it is getting saved automatically s a local objct $tmp.
Also,there is no option enabled to save it to transportable object.
in se80,in the object list also that object is not reflecting.

check it
Re: local object to transport request for a form
just go to SE03 > object Directory > change object directory entries

Did you know that Verizonwireless is saving your checking account information when you pay your bill by check and then making it part of your "MyVerizon"? This means of course if they get hacked that information could be compromised. What do you think of

Did you know that Verizonwireless is saving your checking account information when you pay your bill by check and then making it part of your "MyVerizon" without you adding it? This means of course if they get hacked that information could be compromised. What do you think of this?

Credit card and debit card and checking and savings information is encrypted so it is possible to be hacked, but the odds are greater to get hit by the Love Boat then to have a wide scale hack.
Oh yes they do happen, Bank of America, Chase, Citibank, Target and quite a few others. But in all the years I have paid my invoice with saved card information I never been hacked.
You use good passwords and the risk is minimal.
Good Luck

ITunes accepts password for initial login but not for Match, account information or automatic downloads

Hello all,
I have an iMac with 2.0 Ghz core duo running Snow Leopard 10.6.8 and the latest iTunes 10.5.1. iTunes will accept my initial login for purchases and access to the iTunes Store. But if I attempt to access my account information, enable automatic downloads or iTunes Match, I get a login window that states, "Sign in required." I enter in the correct password but iTunes does not allow me further access. It just keeps giving me the same login window over and over. It does not state that I have entered in the wrong password.
I have attempted a few remedies, all without success:
1. Preferences>advanced>reset warnings and reset cache then restart.
2. User>library>preferences. Placed plist preferences for iTunes in trash, then emptied trash. Restart.
3. Reset password.
4. Trashed iTunes application, emptied trash. Downloaded new copy of iTunes 10.5.1. Restart.
5. Delete SC folder and restart computer.
None of these attempts have fixed the problem. I run the same software on my MacBook with a 2.4 GHz Core 2 Duo and I have full access without any problems on that computer. The only problem is with the older iMac.
Any tips or solutions would be most appreciated.
Thanks.

Well, no I haven't heard from Apple yet. But I'm slightly embarrassed. When I was told there was no way I could combine accounts, the friendly Apple lady suggested I change the ID on the old account to be similar to my new ID. I did that (and promptly forgot about it). Until just now. Once again, I'm able to update my Apps, but it's still annoying you can't combine accounts.
More than slightly embarrassed,
Chris

Error occured while saving the user account information

I'm trying to install LiveCycle ES 2 with PDF Generator on a Windows 2008 server wtih SQL Server 2005. When I run the configuration manager I get an error in the step where you add the administrator user credentials for generator. The error I'm receiving is ALC-PDG-080-032-Error occured while saving the user account information. Has anyone seen this issue before? Any ideas on what the problem may be?

Going back some time, another user (do not recall Matrox on the system) had a similar issue. The workaround in that case was to use Save_As and just increment the file name. Now, I do not recall any real "fix," and for another user, the Save_As resulted in the same behavior, so it was not a universal workaround.
Good luck, and please report your findings,
Hunt

I have to enter my Firefox Sync account information every time I open the browser. Is there a way to get Sync to retain this information?

Using Firefox 3.6.12 with Firfox Sync 1.5.1. When I open Firefox I have to go to Sync settings and put in all my Sync account information. One the information is in place everything sync's up fine and I am alright until I close Firefox. Once I open Firefox again I have to input all of my Sync account settings again. Is there a way to get Sync to remember all of my settings so that it connects and syncs every time I start Firefox?

@the-edmeister
Thanks for the advice. In my case, it is sufficient to '''uncheck''' " Saved passwords".
('''''Preferences -> Privacy -> Clear History when Firefox closes -> Settings -> Saved Passwords''''').
Great to have Sync. :)

I changed my apple id but the apple id for icloud did not change on my mac. How do I get icloud account information to change and match my new apple id?

I changed my apple id but the applie id for icloud did not change on my mac in system preferences.
I have changed my apple id on system preferences under users and groups but the icloud preferences don't pick up the change.
I restarted my computer, and still no change.
I have been using icloud under my old apple id for mail calendars and notes.
How do I get icloud account information to change on my mac's system preferences and match my new apple id?
I am missing something.
Please help. Thanks.

Thank you Roger, your solution gave me the courage to sign out of Systems Preferences. The pop up told me it was going to delete my contact and other information from my mac, so I was hesitant to do that. Well I did as you directed and I was able to sign in with my new apple id and I did not lose the information the pop up threatened I was going to. So again thank you. It is the little things that make a big difference sometimes.

How do I get past "Unable to Verify Hotmail Account Information" on iPad2? Can't retrieve my Hotmail e-mails from my iPad, Help!

Bought a new iPad2 with wi-fi access. I am at home on my wi-fi network using iPad. Trying to add my Hotmail account to the iPad so I can retrieve my e-mail messages. When I try to add the Hotmail e-mail account to the iPad, I select Windows Live Hotmail on the iPad. I then enter my Hotmail e-mail address and Hotmail password in the iPad. The iPad then says Verifying. Then a box pops up saying "Hotmail Account, Unable To Verify Account Information". I spent about an hour on the phone with iPad support and they tried everything they could to no avail. iPad support said I would need to contact Hotmail support. I have learned that Hotmail does not have a support phone number that you can call, only a search area that is of no help. I am able to log onto my Hotmail e-mail account no problem on my regular computer. I was able to program my wife's Comcast.net e-mail into the iPad no problem and bring up her e-mail on the iPad. I can not get past the "Unable to verify Hotmail Account Information" message on the iPad. Frustrated, want to be able to retrieve my Hotmail e-mail messages from my iPad, please help! Thank you.

My hotmail was working properly until one month ago , then I do not what happens ... My mistake has been to cancel that account and try to re-load it... I am blocked at "unable to verify account details".
I read and follow carefully all your steps here above but it is not working!!
I also try to ask securiry code to mocrosoft and put it instead of hotmail password when creating new Ipad account but nothing.
I try to go everywhere on microsfot pages and on my mail account setting but I can not find any help from there. From PC is working
I try to choose "other" from the list of account and insert there hotmail account, both indicated adsHOTMAIL or OUTLOOK, but in this case it tells me "username or password for POP3.live.com are uncorrect.... what is POP3.live.com??
I already try everything find in the net here and elsewhere ... I have hotmail account since years can not thik to change it .... Some other help?? Some indication I have not yet try?
Why does not appear OUTLOOOK from the choice of default account in the "add account section"????!??!????

How do I get my hotmail to work on my ipad mail. It keeps saying unable to verify account information how do I fix this??

How do I get my hotmail to work on my ipad mail. It keeps saying unable to verify account information how do I fix this??

Hi there Robbonchelle20111,
You may find the troubleshooting steps in the article below helpful.
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
-Griff W.

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, I get stuck in the same loop and can't sign in!

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!

If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.

Can anyone tell me how to I get an old account information and recorded messages from a conversation

I am totaly confused by eircom and efibre.......last year I was in arrears with eircom to the tune of( as I thought) of €357.66and I was disconnected but in the long run I got a huge bill in my door of €656.48 , when I had to the money to pay the original amount, I was put through to efibre who told me that remaining amount of €298.77 shouldnt have been on my account and they would take it off I was also given a new account and phone number. I have now got several bills from my old account plus a letter from a company called BCW (debt collectors) who are treathening to take legal proceeding against me...... can anyone tell me how do I get my old account information and that conversation I had that day??

Thanks Tracey,I got a letter from the debt collectors BCW on Thursday to say if I didn't respond to that letter within 5 days they were going to take legal proceeding against me. 10 minutes from receiving the letter I got a call from BCW to say that eircom had been in touch with them to say the issue has been resolved and that I don't owe the money,I am now waiting on a letter from BCW to tell me same so as I have it in writing. So hopefully that is the end of the issue, Many thanks Confused 1

I downloaded Icloud somehow I changed my itunes account information and cannot get back to my original account that had a redeemed balance on it how can I get back to the original account?

I downloaded Icloud somehow I changed my itunes account information and cannot get back to my original account that had a redeemed balance on it how can I get back to the original account?

Buy the songs that your friend put on the iPod that you liked. They had no right to give you the copyrighted music when they sold you the device.
tt2

Account Information getting Saved Automatically

Similar Messages

Maybe you are looking for