Account maintenance for collective account

Hello,
I am trying to use FP06 (account maintenance) for a collective account.
The system doesn't allows to me to select debit documents (collective bill - statistical key S) at all.
Someone knows about account maintenance restrictions for collective account?
Thanks,
Ben

Hi Benjamin,
http://help.sap.com/erp2005_ehp_04/helpdata/EN/b7/c75e4803a96349998f49214710ffed/frameset.htm
hope the link helps,
VR

Similar Messages

  • I have two accounts and for both accounts I use the same emails. I cannot verify my email on my main account because of this. Help? Can I just cancel my other account to avoid confusion?

    I have two accounts and for both accounts I use the same email. I cannot verify my email on my main account because of this. Help? Can I just cancel my other account to avoid confusion? I am totally stuck now.

    By the sounds of it you have linked Email Accounts, if so this means that you will both recieve the majority of the same Emails, and if you do and you read them on your account (which is linked with your husbands) then they will appear to read on the both of them because they are linked. With the majority of Email providers these days they're Emails are (simplified) in the cloud you could say, meaning that if you read or delete shared Emails then it will do the same on both accounts rather than just the yours.
    I hope all that made sense, sorry that I couldn't be of anymore assistance.. If you havent already try googling your problem - you may find some answers on there

  • Error - No GL account selected for Asset account in Business partner master

    Hi Experts,
    Scenario - While adding A/P Invoice for Asset item, the error "Error - No GL account selected for Asset account in Business partner master Message (3518-13)
    Awaiting your replies
    Regards,
    Sid

    Hi,
    You need to map the control account of that vendor(business partner).
    ->Open the respective Business Partner master data
    ->Under accounting tab
    ->Under General tab
    ->Control accounts (will be indicated with ... button),on opening this
    ->You will be prompted to map the control accounts
                                             ^ Down Payment Payables
                                             ^Assets Account
                                             ^Open Debts
    Here you need to map the Asset account which also must be a control account(control account option should be checked in the chart of accounts).
    Pls do check in the test system,understand the behavior of this account by booking ap invoice and payment,then proceed in the live system.
    Hope this is helpful

  • Account determination for COGS account by customer

    Dear gurus
    I’d like to get advice about account determination for COGS account.
    I have requirement to determine COGS account based on “Customer”.
    If the customer is outside the group, we want to charge to
    “Sales: Third-party” and “COGS: Third-party” accounts.
    And if the customer is in the group, we want to charge to
    “Sales: Intercompan” and “COGS: Intercompany” account.
    However, since COGS account is determined from Valuation class in
    Material master (OBYC), it cannot be determined from “Customer”.
    (Because same material can be sold to third-party and intercompany too)
    Do you know any solution for it?
    Yoshi

    Hi
    The only other way I could think of is to do an enhancement at the time of delivery to read the customer and substitute the GL Account for COGS based on Customer recon Account.
    The sales can easily be seggregated based on Customer Account Assignment Group in the customer Sales Area. Assuming the material account assignment group is 01 and customer account assignment group are as under:
    External Customer 01
    Group Customer    03
    Now in VKOA you can seggregate the revenue account determination for Group and external customer based on different customer account assignment group.
    The only issue is for COGS GL for which you might want to look at Enhancement or Split Valuation that I talked about earlier.
    Thanks & Regards
    Sanil Bhandari

  • You have not defined a CO account assignment for an account

    Dear all,
    i have a problem while SD billing.
    we assigned costelement for newly created condition type through account assignment key and group.
    but system is giving error when posting billing as "You have not defined a CO account assignment for an account".
    I already assigned costcenter to this costelement in OKB9 and also in the costelement master also
    but still have same problem.
    Pls help me the path to make the rules forget co object for costelement.
    tks in advance...

    Dear Friend,
    I think this problem is from Gl account , maintain the cost center in Gl account and then try once.
    T code FS00 . Click on Edit cost element tab- Default Account assignment,here enter cost center and save.
    Hope it helps,
    Regards,
    Ramesh

  • You have not defined a CO account assignment for an account that is relevan

    Hi,
    While creating a billing document I encountered the following message
    "You have not defined a CO account assignment for an account that is relevant to cost accounting."
    My billing document got created but my accounting document was not created.I checked the Billing-->header for the error and it says "Error in accounting interface".
    Can anybody throw some light on the reason behind this kind of error?

    Hi Ronaldo
    Firstly , Check wheather you might have done Revenue account determination (t.code VKOA) with KOFK condition type also and assigned G/L accounts also.As KOFK condition type is used for controlling purpose . So kindly check wheather the cost centers have been created or not and also check wheather conditon types have been assigned or not   (after releasing the billing we can check) .
    Ask your FI consultant  to configure the controlling (CO) part
    Secondly , If the configuration has not yet happened then in VKOA remove the assignment made to your sales orgn +acc assn grp of CMR &  MMR and then go to VF02 and then save the billing document 
    Regards
    Srinath

  • You have not defined CO account assignment for an account that is relevant

    Hi All,
    While psoting the billing doc to accounting it is giving error as:
    You have not defined CO account assignment for an account that is relevant to cost accounting.
    Please let us know about error and which team and where we configure that?

    Hello ,
    one of the G/L accounts for which you have specified in revenue accoutn determination (T code -VKOA) has a setting which requires assignment ot a CO object.
    check for the g/accounts detremined, goto FS00 enter the g/l account and the company code
    Click on the Edit cost element tab. chcek the entries there, if ther is a entry it means cost assignemtn is reuqired
    check with the FICo consultant , if this is really requried and what is the object desired.
    based on that , you can have the object , if it si related to sales order then WBS element, internal order etc can be input
    Hope This helps
    Thanks
    akasha

  • GR IR Account Maintenance for past due goods receipt

    Basically, we have open GRs dating back to 2003. We are hesitant to perform MR11 since this will affect the valuation of the materials as they are all set to MAP (moving average price)
    Aside from that, in cases wherein the GR'ed material has already been issued out of the plant, the additional value incurred from the GR/IR account maintenance will then be affecting both the MAP and the Price Difference Account
    What we plan to do here is to set up a GR/IR Adjustment Payable Account and map it to the accounts that will be affected. However, we have to make sure that we capture all the possible accounts that will be affected and replace it with this created GL Account. Upon execution of MR11, all differences will be dumped into this account. Once done, we revert back to the old configuration and then just reconcile the differences in FI
    Any comments?

    Hi,
    We have already implemented the solution for the open POs dating a year older. It seemed ok since our users were able to sign off the results. Here were the steps that we undertook:
    1. Created a dummy GR/IR Reconciliation Account in FI - basically this will act as a sink wherein all the discrepancies will be dumped.
    2. Changed the Material Valuation from V to S - in this way, when we reconcile the POs via MR11, the entries will post to the Price difference Account
    3. Change the automatic account postings to map to the FI account in 1 - in this way, all preice differences resulting from the MR11 maintenance will only be adjusted to one account
    4. Perform MR11
    5. Once all the open POs were closed, our FI team then performs JVs from the GR/IR Recon Account to the respective Accounts that need to be corrected.
    6. Revert back to old settings for both material and automatic postings
    NOTE: We scheduled a lock out to prevent any users from transacting. Only I was allowed access to the system to perform the task.
    I do not know if this will apply to your scenario as well but i do hope this helps

  • How to use one Account dimension for multiple account structures

    We are implementing a HFM application to replace two general ledger applications, one being Corporate and the other a new subsidiary. We need to maintain both of the chart of accounts and their unique rollup structures. We are facing the difficulty in attempting to combine the two chart of accounts into one HFM Account Dimension because a few of the subsidiary accounts have the same account numbers but they are meant different things. 
    Question:
    How can we set up two distinct account structures in HFM and also have the subsidiary accounts rolled into the Corporate accounts for consolidation reporting? 
    Appreciate your help.

    Hope this help.
    _http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

  • No G/L account selected for Asset Account in Business Partner Master Data

    Hi All,
    When i tried to raise A/P invoice for an Asset Item the system is raised the following error"  why?
    " No G/L account is selected for Asset Account in Business Partner master data "
    thanks
    SV Reddy

    hi Giri,
    When you choose from list against the Asset Account in the business partner master data it is only displaying the Trade Creditors Account domestic and foreign acounts only.  which one to choose in this case?  i presume trade creditors account is the one to choose.  but what is the logic for asset items to choose this Trade Creditors Account?   Or  else can we create a separate control account for purchasing the Asset items?  what is the logic again here choosing a separate account through option create new ?
    thanks
    SV Reddy

  • Swapping Sub-account email for Main account email ...

    Hi,
    Some years ago when we first set up BT broadband my son entered the details online and set his email address as the primary account. He's now moving on and I'd like to update this to have my email (currently a sub-account) as the main account email. How can this be done? Any guidance greatly appreciated.
    Thanks,
    David
    Solved!
    Go to Solution.

    you cannot do this but if you contact the mods they may be able to help you
    contact mods
    can take up to 3 working days for mods to contact you
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Account Groups for GL Accounts

    Hi Experts,
      In the Standard, CAIN - Chart of Accounts - India, SAP has given the flg Six GL account Groups....
      Do you thing it is required to prepare other than these Account Groups...
       1) Fixed Assets Accounts
       2) Liquid Funds Assets
       3) General G/L Accounts
       4) Material Management Accounts
       5) Income Statement Accounts
       6) Recon. Account Ready for Input
    If so please help Gurus what are the Account Groups required for Indian Companies along with GL Accounts Classification...
    Please Help
    Regards,
    Nimish Agarwal
    Moderator: Please, avoid asking basic questions

    Hi,
    For creating this account groups, consultants creates as per the Client requirement.
    Ex:
    Some Cleints wants to creates only as four groups like
    assets,liabilites,income, expenses
    Some other Clients are requires
    Current assets, fixed assets, depreciation current lianbilities, capital,incomes, revenues, loans and advances, admin expenses,other income,other expenses,acc depreciaiton,reserves and surplus, profit&loss....etc like this
    These accoutn groups are easy to understand and idenfies
    Hope you got it
    Regards,
    Kanike

  • Account determination for customer account with ZERO value

    Hi Friends,
    My clint requirement is to sell product free of cost to customer but per accounting purpose taxes need to be calculated.Any possible solution guide us per acheving this challenge.
    Accounting needs to be trigger like below
    DR.customer     $0.00
    DR Free of charge account      $100.00
    CR. output vat 18%                   $18
    CR EXCISE DUTY  12%(IF APPLICABLE)  0.00
    CR un relized revenue                         $82.00
    Thanks in advance
    Srinivasa

    Hi,
    If your configuration is correct, an accounting document will get created during invoice creation even if the value is zero. Acct doc is created not based on the value, but based on the account key to which the condition type is linked.
    Generally in free goods, there will be net price (gross price- discounts). You can link this netprice condition type to an account key. The netprice will anyway be nullified by NB00 condition type which is applicable for free goods pricing. You can also link NB00 to another account key.
    Now the values will nullify each other in invoice. Similarly the values will be nullified in accountnig doc also and they can be posted to any GL account you wish.

  • Activation of Additional Account Assignments for Asset Accounting

    Hi,
    I am facing the problem while running depreciation run through AFAB in that the system giving the error message i.e the cost center I3010 is not relevant to business area 7211 but it is 7210.But when I check Cost center(I3010) Master Record it has been correctly assigned with as system saying with 7210 Business Area and not 7210.Eventhough I assgined correct business area in CCTR Master Record why this error is still coming.
    And in the error help it is saying that you should make explicit assignment with 7210 business area and for this you have to make business area field as a readily input in cutomizing.After that I check in Asset Accounting additional account object I dont have business area at all.
    My questions ?
    1.To rectify this where I have to make this BA field as ready input in customizing ?
    2.If it is yes in Additional Accounts Objects in AA how I can define newAdd Acc Obj in customizing ? Is it possible ?
    Can you plz explain with clear answer becz we are trying since pasy 2 days but the results are hopeless.
    Waiting for quick reply.

    Hi E Pericherla
    Have you checked up the relevant Asset master, regarding Cost Center and BA Assigned there.
    REgards
    Chandrasekaran

  • Account Determination for GL account

    Hi,
    We currently have a P&L account (9XXXXXX) that is NOT set to "Post Automatically".
    Question:
    We want to make it to post automatically and do KO88 settlement to it. Can we do this?
    Point will be rewarded.
    Thanks
    Mohan

    Yes; if we make the balance 0, then it will post automatically; But will it then allow us to do KO88 settlement to that account after this? Or will this only work for vendor/customer settlement?
    Please confirm

Maybe you are looking for

  • How can I combine multiple deliveries of the same address to one shipment.

    Hello Friends, My client is sending multiple deliveires with multiple shipments to the same customer. His cost is increasingm therefore I am lookign to help him to combine all the deliveries to one shipment and one delivery. How can I combine multipl

  • How do I permanently delete an app from my iPad and App Store?

    I would like to permanently delete apps from my iPad and my Purchased list in the App Store. How do I do this? These apps are ones that I have tried and found to be useless or do not work correctly. I have deleted apps from iTunes Store, but I cannot

  • Grouping of requirements into Bid Invitation from sourcing cockpit.

    Hi , We are using Plan driven procurement ,bidding  in ECS.Our requirement is as follows, we have multiple requirements(External requirements) transfered from R/3  with same material and same delivery date to same delivery place, we need to create on

  • Question about display PDF content

    Hi, I'd like to show the content of a PDF file directly in a page region, without having to open the Acrobat reader in the same window and hide all the tabs, other regions... I am not sure whether this is feasible with HTMLDB, so would like to know t

  • Problem - fitting applet in clients screen

    hi everyone................. in our project, we are required to embed an applet in a jsp page what we want here is - the applet should fit in the clients window size exactly without the scrollbars........... when we run this in our machine, i.e., we