Account Manager Question

If I am the account manager can anyone make changes from their phone? I have recently noticed that my other lines phone calls are not showing up. They are there and it tells me how long they were on the phone but there is no phone number.
help...thanks

Give it 24-48 hours; the numbers will show up or it will show that the calling # was restricted or unavailable.
I see the same thing on my account - calls are listed, time and duration, but the numbers are blank for a day or two. It eventually fills in the details.

Similar Messages

Smart Wi-Fi account management questions.

I have a Smart Wi-Fi account and I've got two networks that I manage. I've had trouble with one of the networks and ended up having to reconfigure and reinstall the router. (I did not backup the original settings, my bad.) Now that I've reconfigured the router I've attempted to get it registered with Smart Wi-Fi but I dont' get any prompts to do so. I also can not remove the old configuration from my Smart Wi-Fi account, (which shows off-line). There doesn't seem to be any way to manage this.
The router is a EA6500.
Can anyone help me with this?
Solved!
Go to Solution.

It has not asked to be "associated", I've tried logging in directly to the router and selecting the Smart Wi-Fi and then logging in with those credentials and the reverse, it just keeps looping. There needs to be a management function but it doesn't look like Linksys built in that function.
I may do a hard reset when I have time and run the setup again and see if I can get it to work. I'll give it some time to see if one of the Linksys support folks can provide some info.

Want to buy something Ap Store and I came to buy I have the answers to the questions of safety, now I forgot them, I went to MY ACCOUNT MANAGER website and there was no reset was some other reset but it asked for the answers to Secure

Want to buy something Ap Store and I came to buy I have the answers to the questions of safety, now I forgot them, I went to MY ACCOUNT MANAGER website and there was no reset was some other reset but it asked for the answers to Secure

Morning AndreD86,
Thanks for using Apple Support Communities.
These articles explain exactly what is backed up by using their method.
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
and
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
Also we want to double-click the Home button and swipe the Task Bar to the right.
Then make sure the button on the far left of Task Bar is not muted.
Best of luck,
Mario

HT201303 i have forgotten my security questions so i cant verify my account and when clicking on account managment the link never appears

please help

If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)

I do not remember my answers to the security questions and when I go in to manage my account the questions come up. There is no place for me to retrieve the answers to get in.

I do not remember my answers to the security questions and when I go in to manage my account the questions come up. There is no place for me to retrieve the answers to get in. What do I do.

That's because you never registered a rescue email address. The only way to resolve this now is to contact iTunes Support. They are the only ones that can help.
http://www.apple.com/emea/support/itunes/contact.html

I forgot my security questions, why can't I change them in my account management screen?

I forgot my security questions, why can't I change them in my account management screen?

I suspect that is for security reasons. The following gives instructions on how to reset them: http://support.apple.com/kb/HT5312
Note the last paragraph in particular if you don't have a rescue email address:

Another color management question

Hi folks,
Apologies for yet another color management question, but Im getting very confused and could do with some help. I use a Canon 10D and Canon 30D. Ive come to LightRoom from Pixmantec Raw Shooter.
As Ive gotten more serious about producing high quality images for both the web and as prints, I thought Id invest in the Colorvision Spyder2 calibration product. So my monitor is now calibrated (quite a difference from what I was seeing!) and I have a calibration profile applied.
My needs are pretty obvious I want my images to look the same wherever theyre viewed including exported files (such as JPEGs) whether this be on my monitor (in LightRoom, a web browser, Paint Shop Pro, whatever) and on a printer.
Perhaps Im getting confused because Im trying to compare what LightRoom does with what RawShooter does.
In RawShooter, when exporting from RAW to JPEG, I can specify the RGB Working Space Im using and then select my monitor profile. I think that what happens is that the export mechanism takes this profile into account and, low and behold, the JPEG looks fine when viewed in any web browser - the colours are exactly the same as in RawShooter. In Paint Shop Pro they look fine too unless I enable Color Management in which case (Im guessing) the monitor profile is, essentially, applied twice! But the upshot is I seem to get the results I want.
What I cant figure out is how I do this in LightRoom. I can make the same adjustments to the RAW image as I did in RawShooter, but there doesnt seem an option for me to select my profile on export to JPEG only the standard 3 color spaces. Anyway the result is a JPEG that looks somewhat different when viewed in a web browser, or Paint Shop Pro with Color Management turned off. However, if I turn Color Management on in Paint Shop Pro, then it looks fine. So Im assuming that my profile isnt accounted for when exporting JPEGs from LightRoom.
So any pointers or explanations would be really appreciated. I also acknowledge that this is my first foray into color management, and feel free to tell me to go and read some introductory article (link please!) and then come back with a sensible question if thats whats needed!
Thanks in advance.
- Pete

Lightroom color management.
a.) Monitor profile used: The profile set as the default in your operating system (e.g. Windows xp). (your monitor profile software usually does this when you calibrate/profile your monitor).
b.) Working space: ProPhotoRGB
c.) Export color space: You can choose one of the following sRGB; Adobe RGB or Pro Photo RGB.
There is no option (afaik) to change a.) or b.) the option you choose in c.) will affect how the exported image will be displayed in color managed applications or non-color managed applications.
Non-color managed applications are not able to display Adobe RGB or Pro Photo RGB correctly. I guess if you wish a consistent display of your images in color managed and non-color managed applications then the only common factor is sRGB and you should export your images in sRGB color space.
The benefits of the other expanded color spaces are in printing and you also would have to get this end of your color management correct. Printing profiles to match your printer and each paper being used etc.
Until you can get this all sorted out you will get better results from sRGB, this is also applicable when using most commercial printing services.

Key Account Management BP : email function and enterprise directory

Hi,
we want to use the send email feature (email button in the activities view)in the creation of activities within the Key Account management BP.
I have several questions regarding this feature :
Is it possible to integrate it with our LDAP directory to do lookups of the recipients to whom you would like to send the mail to ?
Is there a way to restrict the possible recipients to only users of a particular domain. We don't want users to use this feature to send mails to people outside the enterprise.
Can someone send an email as another user ? i.e. Forge someone elses identity.
Thanks.
Thierry Dagnino
Systems Architect
Hydro-Quebec
Canada

Have you tried doing an upgrade with the 5-database migration method, to see if the names stay the same?
I'm unsure why you're doing an export and import of MPP files - it seems cumbersome and sure it worked for 2007=> 2010 but that doesnt mean its the most effective and efficient.
Unless you have a specified reason to NOT do it (requirements from stakeholders) - I would suggest testing an upgrade with the content database and 4 pwa database
check here for more information on the migration/upgrade
http://epmsource.com/2013/05/02/migrating-ps-2010-to-ps-2013-walkthrough/

Adminstrator account management

we have an customized domain in outlook.com.
we used to login through domains.live.com with user id of [email protected] to manage the email accounts under the domain xxxxx.xxx.
now when we want to manage any account under this domain such as adding an account or deleting an account. we can not do it. we can not go to the account manager page.
please suggest what should we do.

Hi,
This is the forum to discuss questions and feedback for Microsoft Office client. As per the description, I'm assuming that you are having issue with customized domain in Office 365, I would suggest you to post in the forum of
Office 365 Community, where you can get more experienced responses:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to reset apple account secret question's answers?

Dear Friends,
I have creaeted an apple account in 2011 during the release of iphone 4S and even answered those secret questions as well.
Now to purchase apps from itunes to load in my 5S, it asks for answer's of all questions and quite natural... all went wrong.
Please help me to find a way out to overcome this issue by resetting the password.
Unfortunately, I have put any recovery email id also.
SOS...........Help me....................!!!
- Aravind.

If you can't remember the answers to the security questions, then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Security' and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox).
More info, like the rescue email address
http://support.apple.com/kb/index?page=search&src=support_site.results.disambigu ation&q=Apple%20ID%20has%20been%20disabled%20for%20security%20reasons

WORST CUSTOMER EXPERIENCE: $200 credit per iphone 5 trade in: Promised by GoWireless in Chino Hills & Verizon Account Manager, But Not Addressed in Over 4 Months

Hello everyone,
I just had the WORST CUSTOMER EXPERIENCE with a Verizon Wireless Premium Retailer (Go Wireless in Chino Hills) and a Verizon Account Manager.
Through a ridiculous saga of events, I finally had to send an email to a customer service supervisor with screenshots, outlined below to try to resolve.
Besides this, is there anything else I can to do address this situation?
I don't want any Verizon Wireless customer to EVER go through this.
Please see the detailed email below for reference.
Hi Laura,
I am also including GoWireless customer service on this email due to the incredibly TERRIBLE customer service I received from their employees.
As we discussed over the phone, I am contacting about the terrible, dishonest, and incompetent customer service I received regarding my upgrading of iPhone 6 through GoWireless Verizon Wireless Premium Retailer located at The Shoppes at Chino Hills, 13925 City Center Drive, Chino Hills. Their phone number is 909-465-5840.
I will send the screenshots of the text conversation I had with GoWireless salesperson (Will) over the course of almost 2 months, in an attempt to receive the $200 per iPhone trade in credits that he and GoWireless had promised me when I upgraded my phone to an iPhone 6.
As the text message screenshots will show (and a follow up emails, as this maximum has a maximum capacity issue), I was continually following up with Will over the course of 2 months regarding receiving the credits. Throughout the conversation, he kept indicating that he would address it. As the text messages will show, he never resolved it and I had to continually pursue getting the credits owed to m e.
After this, I contacted GoWireless corporate customer service and complained about the situation. GoWireless customer service indicated that they would help me resolve the situation. So they ended up contacting the store manager, Aaron.
Aaron then contacted me, after corporate customer service contacted him. Aaron assured me that he would address this and ensure I received the credits I was promised in the original transaction.
Aaron eventually punted me to a Verizon Account Manager during this past January. That account manager's number is 619-756-2100. I will attach the screenshots of the text messages I had with that individual for reference.
That Account Manager indicated that he would just apply the $200 per phone credit to my account since my family had to go through so much trouble and hassle over so many months.
After waiting for a month and not hearing from him, I reached out to him via text a few weeks ago. He did not respond and I sent 2 subsequent texts to follow up, and he never responded.
It was at this point I called Verizon customer service and complained about this issue, this past Saturday (2/21). As the voice recording for that conversation will show, the customer service rep indicated that she would try to apply the $200 per phone credit and that I should call back within 48 hours if I don't receive the credit on my account.
As I didn't see the credits applied today, I called customer service and spoke to you eventually about this situation.
While I appreciate your help in trying to resolve this, I would like to make a note of the following:
1. GoWireless sales representative WILL was INCOMPETENT and/or DISHONEST in applying my credits. As the text messages show, the ONLY reason my family purchased the phones were because of the $200 per phone credit.
2. GoWireless store manager AARON is INCOMPETENT and/or DISHONEST about this situation.
As you heard today on the call, Aaron tried to pass the blame onto me first, saying I didn't turn the phone in on time. This was despite the fact that I had been corresponding with Will over text and spoke specifically with Aaron the situation. They were the reason that I "didn't turn my phone in on time" Either Aaron "forgot" our conversation around this whole situation or was intentionally being deceitful.
Aaron then tried to pass the blame to the Verizon district manager, saying that it was something that that district manager to handle.
This situation indicates Aaron's inability to take responsibility (he tried to blame shift the issue) and be accountable for his actions. I am appalled that a large entity like GoWireless would employ such a person in a management position.
3. Verizon Wireless account manager (phone number 619-756-2100) is INCOMPETENT or DISHONEST about this situation. He indicated that he would help resolve this and he did not, and, in fact, has ignored my attempts to contact him over the past few weeks. I am shocked that such a person could be given responsibility to service customer accounts.
4. As we discussed, I'm am also going to put a formal complaint detailing out this situation on Verizon Wireless forums. I don't think any customer deserves to go through this type of experience. It is completely ASININE, ABSURD, and HORRIBLE that a customer has had to keep following up on this over the past 4 months. Even arranging a conference call today with Aaron and you!
The lack of professionalism and integrity of Will, Aaron, and the Verizon Account Manager is unbelievable!
5. Is there anyway that I can pull my account from GoWireless considering the situation. I don't think Aaron and his team are capable of honestly servicing any customers.
As I indicated, I will send a follow up email with the additional screenshots for your reference to show the set that I have.
I hope we can finally resolve this situation and my family FINALLY gets the $200 per phone credits promised to us in the original transaction.
Thank you.

Holy cow... That was a marathon as opposed to a sprint.... Since the iphone has such a good resale value, I agree - next time ebay.
i Am glad you finally got the cards. They should just credit the account.
As I see the same complaint on AT&T forum, the trade in programs are flawed, universally.

Lightroom 4.1 crashes every time I try to launch the email account manager

Running Lightroom 4.1 64bit edition on Windows 7 Ultimate. Ivy-Bridge 3770, 16Gb Ram, Crucial m4 SSD.
Crashes every time I do the following:
1) I right click on an image in the library or develop module and select "Email Photo"
2) In the From drop down list - select "Go to Email Account Manager". Microsoft Outlook is also listed (I think i played around with outlook in a previous on a previous install, probably lightroom 4 beta, but not the current one).
Lightroom imediately hangs.
Windows Crash Report:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.1.0.11
Application Timestamp: 4fb2266f
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.30319.415
Fault Module Timestamp: 4d26d15a
Exception Code: 40000015
Exception Offset: 0000000000075fe9
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 3f99
Additional Information 2: 3f99d01d55a59f0cf00ae3a1c9abd440
Additional Information 3: b4f4
Additional Information 4: b4f43863618d6c6fd5483b27fa17fcc5
I tried re-installing but it doesn't seem to fix the issue (it appears that there are some settings or something that are persisting). A completely clean install in a virtual box VM (windows 8) comes right up and gives me the option to select a new email account (sending pictures works fine). Any idea how to completely clear the email account settings so i can start over with setting this up. . ?

Hi Sean,
thanks for answering. No, it crashes anyway. I tried changing the identity plate color in all different modules. I was able to change it once when I had just bought a new computer and installed Lightroom, but now I can't. I wonder if there are any cache files or anything causing this. Unfortunately I don't know enough about this to fix it myself. I wondered whether LRB is causing a problem simply by having it installed, but as I said, after I removed it from the Web Galleries folder, the problem still occurred. Is there any way to recreate the identity plate in Photoshop (same font and size etc.) and reimport it into Lightroom? I need to finish my website and my name is sol light, it is barely legible. Any fix or workaround would be appreciated.

Multiple Account Mgmt question

I am having some difficulty mastering the Owner/Permissions account managment features. Probably user error but.. I have set up 3 separate accounts for kids in the house- all on one iMac. They are "managed" accounts with I think "simple finder" capability. 1. I can not seem to assign screensavers individually as I cant access that task when logged into kid's account and I dont see the ability to do that for all the accounts when logged into primary account (I did figure out how to set background pictures for each) 2. Kids app icons dont show up on dashboard bar- only in an unamed (and unnameable) folder on the bar and finally 3. Is there any way I can attempt to do all this admin stuff w/o having to log in/out constantly??
Any advice is appreciated. Thank you,
bjonline

Hi there
When logged into your kids account click on the finder menu and there should be an option to go to full finder (provided simple finder is on). You will be prompted for your admin password. Once entered you should be able to change the accounts as you please. When you are finished click on the finder menu again and there should be an option to return to simple finder.
Hope this helps

Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!

Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support

Goods Issue with Purchase Account Management

Hi,
in one of our foreign subsidiaries we have to run the MM-Purchase Account Management. These subsidiaries will be delivered by Cross-Company Replenishment deliveries with intercompany-invoicing. Every Goods receipt for such an replenishment delivery will be posted in the receiving subsidiary, besides the normal bookings on the u2018Goods/Invoice Received clearing accountu2019 and u2018Stock accountsu2019, on additional purchasing accounts. Now itu2019s possible that the goods have to be returned to the delivering plant due to any problems. To send back the goods we use again a SD-delivery (triggered also by an MM-IC-Purchase order) and with this SD-delivery we want also to post the goods issue in the subsidiary. But as the goods receipt has been posted on these special additional purchasing accounts, the goods issue has also to be posted on these special additional purchasing accounts (The target is to correct these purchasing accounts to the ammount of the returned goods). But it seems that this is not possible because of the MM-Account determination which doesnu2019t allow to post on these special purchasing accounts with an SD-transaction. Iu2019m no MM-expert but is there any possibility to post on this purchase accounts also when posting a goods issue in SD? If not in standard, are there any User-Exits in the account determination?
Regards
Stephan
Edited by: Stephan Nadler on Aug 12, 2008 1:20 PM

Hello Dinesh,
Batch valuation is similar to split valuation. Here is the link on how batch valuation works.
http://help.sap.com/saphelp_47x200/helpdata/en/25/283db54f7811d18a150000e816ae6e/content.htm
Please check in sandbox environment before using.
Hope this helps.
Regards
Arif Mansuri

Account Manager Question

Similar Messages

Maybe you are looking for