Account Naming Conventions & System Administration

How can I change the random string of characters to a readable name? Also I had a DSL account 4 years ago and Verizon can’t delete the email names so I can use them under the new account. The DSL problem has been under request for a year with only promises that have not been kept. The TV and Phone work as designed, but the folks at the Internet side of the house seems to know nothing about server administration. A trouble ticket is open and Verizon has advised three times that this problem was resolved. It has not. Anyone have any suggestion on how to move an elephant?

Hi Manil,
Extension to what Ravi suggested in Dim for Account against interunit GL under propertiy TYPELIM keep either ARAP or some naming convesion and use same logic in business rules for elimination.
Keep PINTCO property under Account dimension against accounts require elimination as "Y".
No need of changing any naming convension of GLs.
For your information normally consolidation happens at Group level better to map it with Group GL instead Operational GL
Regards
Naveen KV

Similar Messages

My login widow shows both user account and system administrator account . how do i not show the root account on my MBP i have upgraded to mountain lion

my log in window shows btoh my user account and the system administrator (root) acount. how do i not show the system accout on the log in window?

I think you need to disable the root user assuming you have it enabled.
Navigate thus;
/Applications/Utilities/Directory Utility
...and then.....
Edit>Disable Root User

Why no system administrator?

Suddenly, after a restart, there seems to be no System Administrator on OSX Server (ML). I cannot update software, or login to the server. I changed the root user password, but when I open the system prefs to users/groups, I am unable to give sys admin status to any of the users listed. I check the box, but it asks that I restart the computer before changes (and it unchecks the box). When I restart, the change is not applied. Any guidance from the community would be greatly appreciated.

Please take these steps to restore administrator privileges to your account. This somewhat tedious procedure is only necessary if you've confirmed that no adminstrator account exists on the system.
Step 1
Boot into Recovery mode. The OS X Utilities screen will appear.
Step 2
Take this step only if you use FileVault 2. Launch Disk Utility, then select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
Step 3
Select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your boot volume if not already selected. Pull down the menu labeled Select the user account and select
System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
Step 4
This step, like Step 2, applies only if you use FileVault. Log in as usual, then log out, but don't restart.
Step 5
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 3 in the Password field. You should now be logged in. Do nothing while logged in as root except as indicated below.
Open the Users & Groups preference pane. Select your usual administrator account in the list of users and check the box marked
Allow user to administer this computer
You'll be prompted to restart. Do that and log in as usual.
Step 6 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user."
Credit for this idea to ASC user wessongroup.

The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.

I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.

I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault.

Logical System Naming Convention

Hi Guruz,
Is it mandatory to name your logical system starting with SAP system name. I went through SAP Documentation for creating logical system, it says <sap system name>CLNT<client number>. I didn't put my SAP system name for the first part<sap system name> instead some random letters. I know this question may sound stupid but I am right now in the middle of the integration so, I don't want to change it. Please confirm.

I'm work for the customer who has ~4000 logical systems defined (not all represent SAP boxes though). Which I find quite a lot, yet given the rules of naming convention helps a lot.
I would say that having the system name should be used whenever we talk about Logical Systems representing SAP boxes. But in case of external non-SAP applications, it is helpful to represent them by the external system.
Say, you have 20 SAP installations, each sending interface to application A. Then it is easier to monitor in XI/PI interfaces for single receiving logical system 'A'. But if you want to find out messages from given sending SAP system, then using SAP system name is recommended to extract such data quickly.
Regards,
Dominik Modrzejewski

Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator

Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.

Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar.

Implementing Transport Naming convention with the help of BAdIs (Urgent)

Hi Gurus,
We need to implement Transport Naming convention in our landscape.
Transport request should follow the following naming conventions and to enable this we have to enable some necessary BAdIs?
Scenario would be like this....!
Customization
LC-<Track>-<Description> (Non Transportable Request)
<Module>-<Track>-<Configuration Type>-<Change No>-<Description of the Customisation.>
ABAP Developments
AB-<Track>-<Configuration Type>-<Development No>-<Description of the Development>
OSS Notes
BC-<Track>-OSS#<OSS Note No>-<Version>-<Patch Number>-<Process Team>-<Note Description>
Authorization
BA-<Track>-<Version>-<Authorisation Description>
Details :
Track : 01 u2013 Hot fixing, 02 u2013 Implementation, 03 u2013 BIW / EP, 04 u2013 Support
Module : SAP Module (FI, CO, MM, SD, PP, etc..)
Configuration Type : I u2013 Initial Configuration, R u2013 Change due to TPR or Additional Functionality
Change No / Development No : Unique no to trance the base documentation
Please suggest .....................!
Which are the necessary BAdIs needs to be enabled and what other configuration needs to be done.
If anybody has any document please provide.
Thanks in advance..............!!!
Regards,
Jai Sach

Hello,
SPRO --> SAP NetWeaver --> Application Server -->
System administration --> Change & Transport domain
--> BADI -->Business Add-In when Editing Requests
IF_EX_CTS_REQUEST_CHECK~CHECK_BEFORE_CREATION
Happy Tony

Naming Conventions for Workflow

Hello,
does anybody have a document for Naming Conventions for Workflow.
I found nothing the last hour.
Thanks in advance for any help ...
Stefanie

Hi,
I am sending you naming convention which we followed in our project.
Workflow Template & Standard Task:
SAP/R3 Limitations:
Workflow Template & Standard Task names are limited to 12 bytes.
Standard:
Bytes 1-3 of the Workflow Template & Standard Task (see following table) are intended to give an overview of general information regarding the Workflow Template & Standard Task.
Characters 4-12 of the name should be chosen to impart some idea of the Workflow Template & Standard Tasku2019s use and/or contents. (The portion of the Workflow Template & Standard Task name that forms the unique identifier may, or may not, contain underscores characters to enhance Workflow Template & Standard Task name readability.)
Position     Description     Sample Values     Sample Meanings
1     Table system life     Z/Y                Permanent/Temporary
2     Application Type     *                    See Application Designators (Appendix B)
3     OPCO/Region     *                    See OpCo Initial Chart (Appendix A)
4-12     Unique identifier     text                     Unique identifier; may include underscores
Example: ZS7_IDEL9 (I:-Inbound, DEL: - OILDEL 9:- Original)
Business Object:
SAP/R3 Limitations:
Business Object names are limited to 10 bytes.
Standard:
Bytes 1-3 of the Business Object (see following table) are intended to give an overview of general information regarding the Business Object.
Characters 4-12 of the name should be chosen to impart some idea of the Business Objectu2019s use and/or contents. (The portion of the Business Object name that forms the unique identifier may, or may not, contain underscores characters to enhance Business Object name readability.)
Position     Description     Sample Values     Sample Meanings
1     Table system life     Z
Y     Permanent
Temporary
2     Application Type     *     See Application Designators (Appendix B)
3     OPCO/Region     *     See OpCo Initial Chart (Appendix A)
4-12     Unique identifier     text     Unique identifier; may include underscores
Example: ZS7_OILDEL (Business Object for OILDEL Message Type)
Methods
Method names should begin with a verb:
Examples: GET_STATUS, CREATE_ORDER, DETERMINE_PRICE
For Parameters:
IMPORTING parameters     IM_<parameter name>
EXPORTING parameters     EX_<parameter name>
CHANGING parameters     CH_<parameter name>
RESULT     RE_<result>
Events
Event names should have the form
<noun>_<participle>:
Examples: BUTTON_PUSHED, COMPANY_CODE_CHANGED, BUSINESS_PARTNER_PRINTED
Note: There is no specific naming convention for Container Variables in workflow & for Key Fields & Attributes in Business Object. These variables name should be chosen to impart some idea of the variablesu2019 use and/or contents.
Appendix A
ABAP Programming Standards: OpCo/Region Initial Chart
Old #     Company Name                               Proposed #     Accounting Location
98     Common                                                     A              San Ramon
95     FSC                                                     B              San Ramon
80     Chevron Chemical Company                      C              San Ramon
89     Chevron USA-Downstream & General     D     Walnut Creek
75     Chevron Real Estate Management      E     San Francisco
76     Chevron Information Technology Company      F     San Ramon
77     Gulf Oil Great Britain                                    G     London
85     Corporation (Acct. by Corp.)                    H     San Francisco
83     Chevron International Oil company              J     San Ramon
87     Chevron U. K. Limited                               K     England
86     Corporation (Acct. - Local Office)                    L     Various
96     P&M Coal & Mining Company                   M     Denver
94     Corporation (New York)                   N     New York
90     Chevron Pipeline Company                    P     San Ramon
79     Chevron Canada Resources, Ltd.              R      Calgary
92     Chevron Shipping Company                  S                     San Francisco
81     Chevron Petroleum & Tech Co.                  T                     Houston
91     Chevron USA Upstream                  U                     Concord
78     Chevron Canada, Ltd.                              V                     Vancouver
93     CUSA Warren Petroleum                  W     Tulsa
84     Chevron Overseas Petroleum, Inc.            X                     San Ramon
88     Chevron Research & Tech. Company        Y      Richmond
-     Corp. GLX Common validations                   Z      San Ramon
-     PCA                                                   3                     San Ramon
-     Tax                                                   4                     San Ramon
-     Audit                                                   5                     San Ramon
-     Asia-Pacific                                   6                     Global
-     Africa                                                   7                     Global
-     Latin America                                   8                     Global
Appendix B
ABAP Programming Standards: Application Designators
A     Assets Accounting
C     PPC
D     DASS (control station)
E     RIVA/IS-Oil
F     Financial Accounting (incl. Joint Venture)
G     General Ledger
H     Human Resources Planning
I     Plant Maintenance
J     Publishing
K     Cost Accounting
L     Inventory Management
M     Materials Management
N     Hospital
O     unassigned
P     Human Resources
Q     QSS (Quality assurance)
R     PRA (Prod & Revenue Acctg)
S     Basis
T     Projects
U     Enterprise Data Model
V     Sales
W     MMS (Merchandise mgt. System)
X     unassigned
Y     Customer head office
Z     Customer branch
<inappropriate content removed by moderator>
Thanks
Yogesh Sharma
Edited by: Mike Pokraka on Jul 2, 2008 10:34 AM

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Adobe X Pro - requires additional files to be installed by system administrator...

Error message:
Additional files will need to be installed to create PDF from this file. You must have Administrator privileges to install these files. Please contact your local system administrator.
1) just an 'ole lady here - on a pc - not a system administrator (though I think have admin rights in windows 7).
The details:
a) had a lenovo small format pc running XP - Acrobat X Pro worked fine on this pc, could create pdfs and fillable forms etc.
b) Just bought a used pc with Windows 7 Enterprise - after a week of issues - duh - I realized X Pro was not working on the new(used) pc, except to let me open a pdf, and even add a text box, or sign or line out a change in a pdf. - that is all it will let me do..
c) I had a purchased CD of Adobe Pro Standard. In 2012, I was able to upgrade it to Adobe X Pro 10, while still on XP, with a digital download, for which I have the registration key.
The X Pro version showing this morning was 10.1.12 (before I uninstalled it, and I assume after various updates).
I've also tried repairing the installation - and selecting the function I need PDFMaker (to work with MS Word) -
I have uninstalled Adobe, and re-installed it, from my old downloaded file the version is 10.0.0
Finally read that I should have deactivated it on the old pc.
Called Support, and they gave me an all new, full version (download) of Adobe X Pro at 5 pm est, and a NEW S/N.
I uninstalled, the old version, ran ccleaner, restarted the pc, installed the new X Pro 10.0.0, used the new s/n and still cannot use Adobe.
Still can't, create a pdf, combine files from word or create a form from a word doc - nada. Also, do not seem to have Adobe Reader anywhere on this pc, either (a good thing from what I've read).
When I was on XP I did not have this problem. Now that I am on Windows 7 Enterprise, I have the problem.
(I am using MS Office 2003 and do plan to update to 2010. Using Google Apps for Work, small business working from home, did not like Office 365 since I am on a MiFi hotspot for internet (country living))
Maybe all of this was more information than you'd want or need... just was not sure what is is causing the conflict/problem.
Feeling out of my depth with this and really need some guidance / help / specific steps to take - Thanks in advance for your help!
Linda

Hi Linda,
Please try the steps mentioned below:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

System Administrator does not Exist

Hi all, for Fresh Installation of 11.5.10.2, I have applied diagnostics patch for IZU_TOP.
I can login as SYSADMIN account, but can not see System Administrator Responsibility.
It shows Assigned in User Management module to SYSADMIN user. I tried to End Date and Assign again,and bounced Apache, but it does not show the responsibility after login.
While starting / stpooing of CM, it gives message :
'Please enter a valid responsibility. The responsibility System Administrator does not exist or is not active. Check that the correct applicaton short name is specified for your responsibility'.
Please help..
Rohit

Thanks for your inputs, issue got resolution after below actionplan suggested in SR.
RESEARCH
=========
(Note: This is INTERNAL ONLY research. No action should be taken by the customer on this information.
This is research only, and may NOT be applicable to your specific situation.)
Note 335487.1 Patch 3480000 Error: Responsibility System Administrator
Does Not Exist
Note 309009.1 FND.H Patch 3262159 FNDLIBR fails with "Please enter a
valid responsibility" error
Note 316959.1
ACTION PLAN
============
As detailed in note 316959.1 please do the following:
SELECT *
FROM Fnd_Responsibility_vl
WHERE Application_Id = 1
AND Responsibility_Name = 'System Administrator'
AND Start_Date <= Sysdate
AND ( End_Date is NULL OR End_Date > Sysdate );
2.-
SELECT count(*)
FROM Fnd_User_Resp_Groups;
3.- Back up the wf_role_hierarchies table into a new table you create.
Delete the entries in that table (2 rows exist)
Run affurgol.sql FORCE
Then replace those entries back into wf_role_hierarchies table
The steps to execute are:
3.a.
SQL> CREATE TABLE wf_role_hierarchies_copy AS
SELECT * FROM wf_role_hierarchies;
3.b.
SQL> TRUNCATE TABLE applsys.wf_role_hierarchies;
3.c.
SQL> @affurgol.sql FORCE
3.d.
SQL> INSERT INTO wf_role_hierarchies
SELECT * FROM wf_role_hierarchies_copy;
4.- Provide the output of the following SQL statement at this point:
SELECT count(*)
FROM Fnd_User_Resp_Groups;

Output CSV File Naming Convention - Receiver File Adapter

Dear SAP experts,
I need help regarding my scenario.
My scenario is this, Customer will send EDI message to XI. XI will then translate the message and convert it into XML.. After, a Receiver File Adapter will receive the XML then convert it into .csv file.
I've already configured the Receiver File Adapter to convert the XML into .csv file.
But, my problem now is how will I configure to have my output .csv file has a File Naming Convention.
The output .csv file must be "CustomerName_YearMonthDate".
From the EDI message, there is indicated Sender GLN in which, each customer has its own Sender GLN.
E.g., Globus --> 200, Karstadt --> 300, Metro --> 400.
How will I configure so that I can have an output .csv file of,
If Globus sends the EDI message, the output .csv file is Globus_20080304.csv.
If Karstadt, Karstadt_20080304.csv.
If Metro, Metro_20080304.csv.
Kindly advise for a clear and complete solution.
Thank you very much for your usual support.
Fred

Hi Nisar,
My target message (XML) in the mapping is this,
- <ns0:CSV>
    - <SLI>
           <PERIO> </PERIO>
           <ILN> </ILN?
           <EAN> </EAN>
perio, iln, and ean was rooted on SLI field. and the CSV is the rootnode of the target message.
I have created a UDF on the message mapping to accomodate the output customer name, here is the codes:
String fname="";
if(GLN.equals("23456"))
fname ="Globus" +dat;
else if(GLN.equals("5678"))
fname ="Karstadt"+dat;
else if(GLN.equals("6789"))
fname ="Metro"+dat;
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/File",
    "FileName");
    conf.put(key,fname );
E.g.,
Globus --> 23456 (Sender GLN)
Karstadt --> 5678 (Sender GLN)
Metro --> 6789 (Sender GLN)
This UDF i've made in the Message Mapping was mapped in the root node CSV.
Is this UDF correct?
Then on the File Receiver Configurations, here are the configs,
Transport Protocol: File System (NFS)
Message Protocol: File Content Conversion
Adapter Engine: Integration Server
File Access Parameters
Target Directory: /var/opt/gsss/sample/csv
File Name Scheme: .csv
Processing Parameters
File Construction Mode: Create
- Overwrite Existing File
Write Mode: Directly
File Type: Text
Variable Substitution --> ???
Adapter Specific Message Attributes
- Use Adapter-Specific Message Attributes
- Fail if Adapter-Specific Message Attributes Missing
- File Name
Run Operating System Command After Message Processing
Command Line: chmod 664%F
Content Conversion Parameters
Recordset Structure: SLI
SLI.addHeaderLine: 3
SLI.headerLine: PERIO;ILN;EAN
SLI.fieldSeparator: ;
SLI.endSeparator: 'nl'
Adapter Status:
Status: Active
Kindly advise if my configs are correct.
Thank you very much!
Fred

What can I do I Lost system administrator name and password

I have used Leopard reinstall disc to reset password but when I want to make changes ie download software etc I am prompted for system Administrators name and password. My ex set up the computer I may have known the password/name but have forgotten it.

Thanks tried that again. There does not seem to be an administrator account, except for (root) option which I get on using start up as above. I use "my account" to log in but do not have admin access only standard. Neither my account nor other accounts (2) one standard one sharing only have admin allowance. Previously tried changing System Administrator (root) and resetting and resetting keychain which achieved nothing. Problem seems to be there is no system administrator among the accounts set up. There used to be. Any suggestions pls.

-cvs, -git, -snv... is really a good naming convention?

The unstable packages have the name of their relative stable one with added in suffix the concurrent version system installed.
I think it is a bad convention since it mixes implementer choices with the the concept of lastest unstable version.
I think it is better decide a single suffix (e.g., -unstable or -dev) and always use it without difference between the implementer choices of programming.
Moreover it avoids renaming headaches if someone changes program for keeping versions.
No flame wars. I decide nothing. It is only a thought.

Profjim wrote:
I've seen this discussed before on the forums...
Edit: http://bbs.archlinux.org/viewtopic.php?id=25938
I found this in the forum search: http://bbs.archlinux.org/viewtopic.php?id=25938
It doesn't seem like anything came out of that discussion. I haven't really found the naming convention confusing; it is the large variety of SCMs that is confusing, and that is not going to change anytime soon. The current package naming conventions are unproblematic for me so you'd have to point out exactly where a real problem has cropped up.

Export-Import and Naming convention question

All,
Newbie here. Have a question related to the naming convention for SAP R/3 system and XI manual export/import process. We are currently in the development environment where our R/3 systems are named as D55CLNT400, D56CLNT300 etc (first 3 characters are the system id, and last 3 are the client number.) This is per the XI best practices convention.
The question i have is - if we name the technical system as above - and export the configuration objects from the Dev to Test environment - where the R/3 systems are named as T55CLNT400, T56CLNT300 (similar naming structure). Does it mean that we need to manually change almost all of the items in the Test environment on the configuration side (like business sytem name, interface determination, receiver determination etc)
Is this the correct way or are we missing something??? I would have preferred a way - where we needed to only update the communication channel parameters.
Thanks.
Message was edited by:
thezone

In the SLD, create three Business System Groups: DEV, QAS and PRD.
In each of these groups, you must have the relevant application servers (in your case, R/3s) and one integration server (XI).
Then, for each Business System in Group DEV, define a transport target in QAS group.
In your case, the transport landscape should be like this:
D55CLNT400 -> T55CLNT400
D56CLNT300 -> T56CLNT300
XI_DEV -> XI_QAS
Do the same for the QAS group (defining transport targets in PRD group). Observe that you need to have the same number of Business Systems in each group for this to work properly.
Now, when you transport your configuration objects from XI_DEV to XI_QAS, all the Business Systems in DEV landscape will be replaced for the equivalent ones in QAS landscape.
More info: http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
Regards,
Henrique.

Account Naming Conventions & System Administration

Similar Messages

Maybe you are looking for