Error #5100 Windows 8 64bit

Hello I was trying to install Vudu to go so I can watch my movies digitally anywhere. I ran into a problem when the application wanted me to install adobe air, I keep getting error #5100. It seems as though as if adobe air is incompatible with my pc but when I looked at adobe air specifications I assume my pc should be able to run it.
System Summary:
OS Name
Microsoft Windows 8
Version
6.2.9200 Build 9200
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
USER
System Manufacturer
LENOVO
System Model
20179
System Type
x64-based PC
System SKU
LENOVO_MT_20179
Processor
AMD E1-1500 APU with Radeon(tm) HD Graphics, 1480 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date
LENOVO 6CCN96WW(V8.08), 1/16/2013
SMBIOS Version
2.7
Embedded Controller Version
0.00
BIOS Mode
UEFI
BaseBoard Manufacturer
LENOVO
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
On
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\windows
System Directory
C:\windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.2.9200.16442"
User Name
USER\Nolan
Time Zone
Pacific Daylight Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.57 GB
Available Physical Memory
1.11 GB
Total Virtual Memory
8.57 GB
Available Virtual Memory
4.37 GB
Page File Space
5.00 GB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
No
Hyper-V - Data Execution Protection
Yes

Hi,
Check if this is helpful to you:
Error 1935 when you try to install Microsoft Office 2010 or 2007
http://support.microsoft.com/kb/926804
Karen Hu
TechNet Community Support

Similar Messages

  • TNS-12518 error on windows 64bit -

    hi all
    we are getting the above error when connecting using SQL plus
    we have 10 databases on the server
    is this erorr due to resources onthe windows box
    thanx

    is this erorr due to resources on the windows boxThat's one possible cause.
    How many resources are you using? How many do you want, and how many do you need?
    Add up all the SGA+PGA for all ten instances, if its near the total memory available on the box ... move a couple instances elsewhere.
    You've got to have a couple GB free for the OS.

  • Problem with AIR Bundled Distribution on Windows 7 (Error #5100)

    We've just finished an application and have set up the bundled distribution for the Installation of AIR and the Application. It works fine on Windows XP, Vista, and too on MAC OS X.
    On Windows 7 however, it doesn't install. It loads the installer, and gets to the stage to ask for user options (installation dir etc), and then after this when installing (both AIR and application) - somewhere, it dies with the following error (Error #5100)...
    Sorry, an error has occurred.
    And error occurred while uninstalling the application. Try uninstalling it again. If the problem persists, contact the application author.
    Any solutions to this? Thanks.

    Hi,
    Is it possible to get the application installer log?
    Moved discussion to the Installation Issues forum.
    Chris

  • Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

    I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

    There are so many different error and problems peopl are having.
    This is a link to mine
    https://discussions.apple.com/thread/3467825
    I think it has to be something on Apples end.
    Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
    hope this settles you a bit

  • I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?

    I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Error installing itunes 11.1.5 for windows(64bit)

    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@
    @@***@@$0A@VCrashOnOverflow@2@@***@@XZ could not be
    located in the dymanic link library C:\Program Files (x86)\Common
    Files\Apple\AppleApplication Support\WebKit.dll
    and
    iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (Windows error 127)
    It's broke  :-(  .

    Try the following user tip:
    iTunes for Windows 11.1.4.62 and 11.1.5.5: "The procedure entry point: ?videoTracks@QTMovie@ [...]" error messages when launching iTunes

  • ITunes reinstallation brings ''error 7 - Windows error 126'

    I had to de-install and re-install iTunes (version 11.1.4 64bit) on Windows-8.1. At the end of the installation  process I got the message: "Service 'Apple mobile device' could not be started. Please check wheather you have sufficient authorization to start the system-services" (translated from German). This came though I was logged on as Systems Administrator. When I started the Task-Manager as Systems Administrator and tried to start 'Apple mobile device' I got the message "the service does not respond in time tot he start or control request. Error 1053)"
    If I ignore the message above and try o start iTunes I get immediately "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". This happens whenever I de- and re-install iTunes.
    Could you please help.
    Thanks in advance
    Hans M.

    I'm happy to tell you that "Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8",
    http://support.apple.com/kb/ht1923 solved my problem.
    Great many thanks to whoever created this procedure!
    There is one additional remark though: In order to remove the specified folders you have to be logged on as Administrator, knowing the Administrator's password is not sufficient. Anyway, I'm tremendously grateful to you supporters!
    Hans M. 

  • Itunes won't start, error 7, windows error 126.

    After updating my itunes a few weeks ago, it now won't load and I get the following error message;
    the program can't start because avfoundationcf.dll is missing from your computer. try reinstalling the program to fix this.
    followed by this error messsge;
    itunes was not installed correctly. pleasse reinstall itunes. error 7 (windows error 126).
    I've tried numerous things including solutions posted in this forum but I can't fix it. I'm running windows 7 64bit btw. If anyone could please help that would be great, thank you.

    the program can't start because avfoundationcf.dll is missing from your computer. try reinstalling the program to fix this.
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • Blue Screen Error for Windows 7 Home Basic 64 Bit

    I have a Sony Vaio E Series with WINDOWS 7 64bit home basic preinstalled. It worked perfectly fine for 2 yrs until last month, I needed to replace the hard drive due to bad sectors. Now, after a month of replacing my hard drive fresh from
    Sony Center, I decided to do a dual boot (install another OS - Windows 8.1 pro) on a separate partition. Everything is averagely fine. But 2 nights ago, I encounter a blue screen error for WIN 7 (my pre installed one). It happened the second time, so I started
    it in safe mode and did a system restore. I don't know if it will prevent future occurence of blue screen, but to make sure, I reinstall my factory default drivers using Vaio CARE... Pls help.
    PS: I have not encountered BLUE SCREEN error in Windows 8.1 yet. Is it OS specific? Here's the error the second time, it happened on my Windows 7:
    Blue screen error for Windows 7 home basic
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7601.2.1.0.768.2
      Locale ID:    13321
    Additional information about the problem:
      BCCode:    1000007e
      BCP1:    FFFFFFFFC0000005
      BCP2:    FFFFF80002EE6B80
      BCP3:    FFFFF880035F4DC8
      BCP4:    FFFFF880035F4620
      OS Version:    6_1_7601
      Service Pack:    1_0
      Product:    768_1
    Files that help describe the problem:
      C:\Windows\Minidump\083014-31964-01.dmp
      C:\Users\GARIBALDI\AppData\Local\Temp\WER-76456-0.sysdata.xml
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Hi Garibaldi11,
    If you are not equipped to debug this problem, you should use some basic troubleshooting techniques.
    •Make sure you have enough disk space.
    •If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    •Try changing video adapters.
    •Check with your hardware vendor for any BIOS updates.
    •Disable BIOS memory options such as caching or shadowing.
    Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff559239(v=vs.85).aspx
    Bug check 0x1000007E has the same meaning and parameters as bug check 0x7E
    Alex Zhao
    TechNet Community Support

  • Error 7 (Windows error 126) avFoundationcf.dll not found.

    Error 7 (Windows error 126) avFoundationcf.dll not found. windows 7 64bit, I've tried everything, but it dosn't work, please help.

    Update .netframework to latest version (see apple support)
    then
    Follow the instructions on this link, basically un-install everything, remove programs that says they are made by apple inc. (using add remove program)
    http://www.reimageplus.com/fix-windows-127-error/   (Many thanks to reimageplus.com)
    You will also need to check and verify that the following folders have been removed:
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple
    C:\Program Files\iTunes
    C:\Program Files\iPod
    C:\Program Files\QuickTime
    C:\Windows\System32\QuickTime
    C:\Windows\System32\QuickTimeVR
    dont forget to remove icloud also
    you dont need to delete your itune music library though
    If any of these folders still exist, delete them along with their contents. (if you cant delete them, right click and go to properties and then security and change the control of the fold to you)
    do this for files under  program files and program file (x86) on your computer
    once you have deleted everything, restart your computer. Then I repaired my registry using a registry repair program.
    Important:-  instead of installing itunes I installed quick time, which installs apple application support (this is the corrupt file which is causing all the issues)
    i then installed itunes and it all worked fine,
    should take no longer than half hour to fix
    hope this helps

  • Error 7 (Windows error 999)

    Help
    I keep getting this error message when trying to launch Itunes: Error 7 (Windows error 999). I uninstalled all Apple products and tried to re-install Itunes but it did not work. i have also tried apples suggestion of installing all the NET.frameworks but with no success? i am using windows xp (old i know)
    please help

    Follow these instructions to completely remove Apple software
    http://support.apple.com/kb/HT1923
    Then use free Ccleaner to repeatly repair your registry until it's fixed.
    http://www.piriform.com/ccleaner/download/standard
    download iTunes again from Apple.
    http://www.apple.com/itunes/
    If you have 64bit Vista or Windows 7, look for the seperate download of iTunes for that further down the page.
    Once installed, use the Apple Software Update under your Start Menu to fully update all Apple components.
    Your content will remain on the drive in the Music > iTunes Folder, nothing is deleted.
    You should be making backups of your content regularly, either through iTunes or via copying the iTunesFolder in your Music folder to a external drive.
    Windows is notorious for having "other" issues that make it unstable, we as volunteers helping others can't always resolve those issues.

  • Oracle 11G Express Windows 64bit Version

    I've seen the thread that states that a Windows 64bit 11G Express version is planned. Can someone at Oracle please provide an update as to when it will be available? Thanks

    Hi ,
    There is a known issue with Dbcontrol when try accessing the URL via Internet Explorer
    Can you check by accessing the Dbcontrol URL via a different browser like Firefox or Chrome
    Ref
    Log in to Enterprise Manager Console using Internet Explorer 7 and higher fails with "Internet Explorer cannot display this page" or with Security Certificate Error (Doc ID 1498203.1)
    If still an issue then check the status of Dbcontrol to ensure its working fine
    SET ORACLE_HOME=<value>
    SET ORACLE_SID=ORCL
    SET ORACLE_UNQNAME=ORCL
    cd %ORACLE_HOME%/bin
    emctl stop dbconsole
    emctl start dbconsole
    emctl status dbconsole
    Regards,
    Rahul

  • Install Oracle Clusterware/RAC  Windows x32bit or Windows 64bit ?

    Hi,
    What is your suggestion to install Oracle Clusterware RAC on Windows.
    Why choose Windows 32 bit ?
    Why choose Windows 64 bit?
    What are the advantages and disadvantages?

    Hi,
    I definitely recommend 64bit Windows, the principal reason is memory addressing limitation.
    In my standpoint do not exist benefits to use Windows 32bit with Oracle Clusterware/RAC.
    32-bit processors have address registers that are 32-bits wide (can address up to 4GB physical RAM).
    You can to use a workaround by enabling the addressing of more than 4GBytes using parameters in Windows (AWE/PAE). But if I want to use more than 4Gbytes, I'll go to Windows 64bit.
    The 4GB addressable space per process is divided into system and user space. By default, the system space is 2GB and the private user space is 2GB. Each user process shares the same 2GB System address space.
    The services of the Clusterware, ASM and Listener will consume at least 1Gbyte of memory initially.
    If you create an instance to to use 1Gbytes and you have 50 connections you will have problems with connections to the database raising the following error.
      TNS-00510: Internal limit restriction exceeded
        32-bit Windows Error: 8: Exec format error
    TNS-00507: Connection closed
        32-bit Windows Error: 109: Unknown errorReason: Problems of memory usage. i.e. Out of Memory.
    Another point:
    With Windows 32-bit using Clusterware/RAC 11.1 you can set Automatic Memory Management(AMM) feature (MEMORY_TARGET) but you cannot use if you create 2 Instances on same Host.
    Check this note..
    *ORA-27102, OSD-00031 Unable To Extend Memory_max_target And Memory_target Past 2GB [ID 842881.1]*
    Oracle Solution: Please install the 64-bit OS on 64-bit server, hence there is no memory limitations
    I belive that is reason wich Oracle not support Oracle Grid Infrastructure 11.2 on Windows 32-bit. You cannot use ASM 11.2 on Windows 32-bit.
    Definitely do not exist reason for me to to use Windows 32bit to support Oracle Clusterware.
    There are lot services involved  wich require memory and a big limitation of memory on 32-bit.
    At present all latest CPUs support 64bit. Then install Oracle Clusterware/RAC x64, even when you are use less than 4GBytes memory, you only have benefits.
    Benefits of Use 64-bit are:
    64-bit versions of Windows have implemented up to 16 terabytes of virtual address space
    64-bit programs use the 16 terabyte tuning model (8TB user / 8TB kernel)
    No performance penalties for large memory
    Unlimited user connectivity
    64-bit Windows versions allow addressing of large physical memory sizes without using PAE
    *Windows Memory Configuration: 32-bit and 64-bit [ID 873752.1]*
    This document gives a better understanding of my perspective.
    http://levipereira.wordpress.com/2011/02/12/comparison-of-32-bit-and-64-bit-oracle-database-performance-on-the-dell-poweredge-6850-server-with-microsoft-windows-server-2003/
    Regards,
    Levi Pereira

  • PSCS5 Error 22: Window does not have a constructor.

    I am having a problem running scripts in PS CS5.
    When I try to run the load files into stack script, which works fine on CS5 on my laptop running Windows 7 64bit.n (i7 Processor, 4gb Ram)
    I am running the same operating system on my main pc (i7 Processor 6gb ram), and am using the 32bit version of PSCS5.
    For some reason however I get the following error when trying to run the load files into stack script.
    Error 22: Window does not have a constructor.
    Line.388
    ->         var w = new Window(res);
    I have tried trashing my preferences and reinstalling photoshop but neither has worked.
    Any suggestions on how to fix would be welcome.
    Regards
    Robyn

    Something similar has come up in the Mac-Forum:
    http://forums.adobe.com/message/2982064#2982064
    Might not be of use to you, though, but it seems to have been solved somehow …

  • CS5 - Error 22:Window does not have a constructor

    I've been experimenting with some old sccripts on the Photoshop CS5 pre-release and they seem to work fine except any that have a user interface.Scripts that run fine on CS2, CS3 and CS4 throw a "Error 22:Window does not have a constructor" error message. I was wondering if anyone else had noticed this and if they were aware of any changes as regards to scripting with CS5 and also how to correct the issue.
    CJ

    Dear All,
    I have been bothered by this same  Photoshop error 22 when trying to use the Photomerge feature or any  other of the Automate features in CS5.
    My computer is a  Windows 7 32bit machine but this should definitely apply to Windows  64bit machines and possibly the same logic may apply to Mac but I do not  know.
    I didnt find a permanent solution but I did find  a temporary fix which will at least allow you to use the function for  one opening of the program however if you close and reopen photoshop the  problem returns.
    Temporary Fix Instructions:
    1.  Locate the file "Adobe Photoshop CS5 Prefs.psp" on your computer and delete it or move it elsewhere.  (I assume by  doing this you may lose *** of your photoshop preferences but it will  allow you to use photomerge and HDR so you choose)
    2. On Windows this file can be found in the User folder under C:\**USER NAME**\AppData\Roaming\Adobe\Adobe Photoshop CS5\Adobe Photoshop CS5 Settings\ (Replace **USER NAME** with the Windows 7 account user name)
    3.  After deleting this file or temporarily moving it out of that folder  you can then open Photoshop CS5 and use the Photomerge feature as much  as you'd like.
    4. As soon as you close Photoshop CS5 the program automatically makes a new Adobe Photoshop CS5 Prefs.psp file so when you try to reopen the program it will not work again.
    I  hope this may be helpful to some people and I hope that Adobe can fix  this issue, I have not and dont plan on submitting this as a bug report  to Adobe, being that I do not personally own the program (still in 30  day trial) but anyone who would like to, please feel free to do so.

Maybe you are looking for