Accounting Revenue distribution not copied when copying a bill

Hello,
I'm trying to copy bills (copy single bill functionality) in PS 9.0. When I do this it only copies my account and alternate account and no other values (e.g. affiliate, project, etc.)
I'm sure I missed some set up but can't find which part.
Can somebody help me with this?
regards,
Stijn

Hi Stijn
Assuming there are no customisations affecting the objects, I suggest you raise a service request with My Oracle Support.
PeopleBooks reads "The system copies all bill information—including any discounts, surcharges, notes, and accounting distributions, but excluding bill status and invoice date—to the new bill. The system creates the new bill with a status of NEW, with a blank invoice date, and with a current date bill added".
My experience is consistent with this information, so your situation is unusual and unexpected. I don't recall any specific setup or configuration that should affect this. I hope that helps.
Regards
Neil

Similar Messages

4.0 EA3 - Data Default not duplicated when copying a table

I noticed that when copying a table from one schema to another, if a column has a data default property it is not preserved.
Steps to recreate:
Copy a table that has at least one column with a non-null DATA_DEFAULT property (right click on table -> table -> copy)
Double click on the new table, and open the Columns tab. Notice that all values under DATA_DEFAULT are null.

The same behavious exists in 3.2.20.09 and whether the table has existing data or not.

Start conditions not copied when copying the standard WF

Hi
I have to copy the standard WF WS10400002 into a custom one having same start conditions
but only with an additional step.
but the start conditions are not copied on doing so.
and when trying to create the start conditions similar to the original one
i dont find the container element Gross Amount(USD) in the copied one
How can i resolve my issue , what else do i need to take care when copying the standard WF.
Please suggest.
Thanks in advance

Hi Raj
The start condition defined in the std WF is
Gross amount(USD) < 9,999.00
and the in the container varaibles that i can see while defining the start conditions there are two varaibles for gross amount
they are
->EC Confirmation goods
   ->Gross amount              Gross Confirmation Amount in Document Currency
->Gross amount(USD)       Gross Confirmation Amount in Document Currency (Currency:USD).
and the BO BUS2203 has only Gross amount in the below format
ProcConfirmationEC.GrossAmount   Gross Confirmation Amount in Document Currency
The std BO doesnt have Gross amount(USD)
Copied WF
In the container variables i can see only
->EC Confirmation goods
   ->Gross amount              Gross Confirmation Amount in Document Currency
So i dont have the variable Gross amount(USD) to use it as in the std WF.
Please suggest.

Why account assignment is not deleted when push "Order as Direct Material"?

Hi Gurus,
I have a problem with shopping carts (SC) of stock items:
1.- I add 5 items.
2.- I push "Order as Direct Material" button for 3 items only.
3.- I push "Hold" button to set SC with held status.
4.- I modify the SC and push "Order as Direct Material" button for 2 items missing.
5.- I order the SC.
One of the effects that it has the "Order as Direct Material" button is that it deletes the account assignment because the items will use to create a PO stock.
But for the last 2 items (number 4.-) the account assignment is not deleted.
This is causing that the PO's have error: "Invalid tax code".
Somebody can say to me why is not deleting the account assignment for items previously hold?
My systems are:
SRM 4.0 (SRM_SERVER 500) level 8
R/3 4.7 (SAP_APPL 470) level 24

Juan Alonso Valenzuela Rodríguez wrote:
> Hi Gurus,
>
> I have a problem with shopping carts (SC) of stock items:
>
> 1.- I add 5 items. -- O.K - Assumed that you have 5 items added
> 2.- I push "Order as Direct Material" button for 3 items only.O.K.You selected as ORDER as direct only for 3 rd item
> 3.- I push "Hold" button to set SC with held status.- O.K. now HOLD the shopping cart
> 4.- I modify the SC and push "Order as Direct Material" button for 2 items missing.- Now you went to 2 nd items and ORDER as direct
> 5.- I order the SC.but this 2 nd item account data was not removed though you selected as ORDER as direct-
check item data what is stored here DP ? if account assignment not cleared it could be a bug. but you need to convince them to get a correction note.
>
> One of the effects that it has the "Order as Direct Material" button is that it deletes the account assignment because the items will use to create a PO stock.
>
> But for the last 2 items (number 4.-) the account assignment is not deleted.
>
> This is causing that the PO's have error: "Invalid tax code".
>
> Somebody can say to me why is not deleting the account assignment for items previously hold?
>
> My systems are:
> SRM 4.0 (SRM_SERVER 500) level 8
> R/3 4.7 (SAP_APPL 470) level 24

Link not displaying when copy and paste

When I copy and paste a url link into an email being composed on Firefox, it doesn't turn it blue and into a clickable link.
It works with IE or Word but not Firefox or Chrome.

This sounds like a problem with your email client. Which email client are you using? Many popular clients, such as Gmail, require you to select the link that you pasted, and push a button that looks like a chain. I believe Gmail will automatically "linkify" it when you send it, even if you didn't push the button.

Linux dac 11g server can not start when copy from windows

when I install the dac 11g on windows7 64bit then copy it to Linux server 64bit , after the dac_env.sh and config.sh configuration , the serverclient.sh can launch , but when start the dac
server, there is a exception about the credentials :
Apr 1, 2013 10:41:07 AM com.siebel.analytics.etl.security.WalletFileUtils getMissingCredentialMessage
SEVERE: Credentials don't exist: map=oracle.dac.repository key=userCredEnc.
Apr 1, 2013 10:41:07 AM com.siebel.etl.engine.core.ETLUtils logException
SEVERE:
ANOMALY INFO::: Can't read credentials from default server db credentials file
MESSAGE:::Credentials don't exist!
Make sure the properly configured cwallet file is used.
EXCEPTION CLASS::: oracle.security.jps.JpsException
com.siebel.analytics.etl.security.WalletFileUtils.getEncryptedCredential(WalletFileUtils.java:136)
com.siebel.analytics.etl.security.WalletFileUtils.getCredential(WalletFileUtils.java:145)
com.siebel.analytics.etl.security.WalletFileUtils.getServerRepCredentials(WalletFileUtils.java:294)
com.siebel.etl.bootup.ApplicationManager.loadDBCredentials(ApplicationManager.java:102)
com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:82)
com.siebel.etl.bootup.ApplicationManager.getInstance(ApplicationManager.java:189)
com.siebel.etl.bootup.ApplicationManager.getInstance(ApplicationManager.java:199)
com.siebel.etl.bootup.ApplicationManager.lookup(ApplicationManager.java:269)
com.siebel.etl.net.QServer.setSpill(QServer.java:213)
com.siebel.etl.net.QServer.<init>(QServer.java:105)
com.siebel.etl.net.QServer.main(QServer.java:499)

RM， thanks !
I have try to use the serverSetupPrompt.sh set the db credentials , but I think the key length I input is not enough then failed , when use the client it prompt the key length issue so it make the db credentials setting up correct!

Territory management not fix when copying activities or making a follow-up

Hi,
We are currently runiing CRM 7.0 and are facing some trouble trying to fill Territory ID when creating new activities copied from an existing one. Also this is not derivated on follow-up activities.
Is there any configuration step to be done in order to get this working or CRM works as designed?
Thanks in advance,
Grupotec

What portal role you been assigned with ? Navigation between PCUI applications is achieved through Object links which are part of the portal role.
Try to assign yourself to the roles SAP_PCC_SALES_MANAGER or SAP_PCC_SALES_REP to make sure navigation works fine among PCUI applications.
If you are using custom roles,then those roles needs to be generated with object links.
Thanks,
Thirumala.

Sales order status is not Closed when copy to AR Invoice

Hi,
Are there any known scenarios where sales order status is not changed to Closed and SO open qty not changed to zero after SO is fully copied to AR Invoice?
Please advise. Thanks.
Regards,
Priscilla

Hi Jitin,
1. For this case, the sales order line status is not closed and the open qty is also not zero although the SO qty are fully invoiced
2. Customer SBO version is 8.8 PL13.
3. There is no SP_TransactionNotification created in this customer environment.
FYI, there is no target entry shown in the sales order document as well. Hence, customer is not able to trace which open sales order has been copied to an AR Invoice target document.
Customer has a few scenarios for the above issue:
1. Multiple Sales orders copied to 1 AR Invoice.
2. One sales order to many AR Invoice.
Since there is no target entry updated in the sales order, is there any SQL query to check which sales order has been copied to a AR Invoice document to rectify the above issue.
Thanks.
Regards,
Priscilla

Richtx32.ocx not registered when copying dimension members

Hi,
On trying to copy dimension members in the member selector I get an error saying that the Richtx32.ocx is not registered. I read through some of the other threads and it is suggested that I copy the file from the server - I checked and the file doesn't seem to exist there either. We have BPC 5.1 SP06 installed with SQL Server 2005. Once this error occurs I have to close down BPC completely before it will work correctly again.
Any suggestions would really be appreciated,
Kind Regards,
Fiona

This worked for me:
You need to copy Richtx32.ocx from a working client machine to C:\WINDOWS\system32 and register it.
To register:
1. Go to Start/run and type Regsvr32 C:\WINDOWS\system32\richtx32.ocx
2. Click 'ok' to the message that the file was registered successfully
Edited by: Roman Artemyev on Feb 25, 2009 3:28 PM

Newbie: Bitmap does not display when copy onto stage

Hello,
I am a complete bigginer. I looked at youtube videos and adobe help but I can't find the solution. I am trying to paste a bitmap (any bitmap) onto the stage. I just get the box outline on the stage. I have imported several basic bitmaps into the library. I tried dragging and copying and pasting but I always just get the outline. I don't know if it means it can't be pasted or there is a setting to display it. If I copy the same bitmap and paste into word for instance I do see the image.
Thanks.
Separately, what is the best beginner learners guide for this program? thanks.
Daniel

Chances are you have the outline mode on for the layer you are trying to place things in. If you look to the left end of the timeline there are some icons to the right of the layer name, one being a rectangle shape. If it shows as a solid colored rectangle, you should see your images, but if it shows as an outline, you will only see the shpae outlined by a rectangle.

Contract Account Custom view not called when replicating thru CRM

Hi All,
We have modified the Contract account screen through BDT.
Functionality -
We have a custom table, that needs to be updated during contract account creation when reference contract account is used for creation.
The update is successful when creating contract account via ISU, but when creating thru CRM, the custom view is not getting triggerred.
I have checked in debugging as well, the process flow triggered via CRM is different than that from ISU. When Business Agreement is created via CRM, neither of PAI / PBO event is triggerred defined for the custom view created in BDT.
When we have the custom field passed from CRM, it is getting updated correctly, but if the field is not passed from CRM view and we are updating using code logic in BDT modules, it is not successful.
Could you please help in case I have missed on some config or is there any alternate way to get the custom requirement achieved.
The requirement is to have custom table updated in both Create and Change mode.
Thanks in Advance!!
Regards,
Rajesh Popat

Hi Siva,
Contract Account was replicating correctly for the ISU system. The issue was, we want to update some custom fields that are not passed as a part of CRM data, but using BDT and some validations, we were trying to populate that field and also update the custom table and link the same to sub screen attached for the contract account screen.
The issues is now resolved. The custom view is getting triggered through CRM. There was some config missing for the BDT.
When using BDT, only the PAI module gets called for all the views defined for the BDT.
Thanks!!
Regards,
Rajesh Popat

Account ID ( email) not known when trying to set back the password

I issued and installed an Adobe DRM Account long time ago, but I didn't use it up to now. Unfortunately I didn't notice the password. Therefore I tried to set back the password now. However then I will be informed that email is not valid. When I have a look into the Adobe Digital Edition Software on my PC , there is mentionned this email however as standard. Now I have an ebook reader and want to test the DRM Functions. As long as I have not the valid password, I cannot read any book. Now I issued a new account with a second EMail Adress, but how can I change this account on my PC ? I don't find any possibility to delete the old email address and to insert the new one ?

Enter ctrl-shift-D (cmd-shift-D on Mac) to Digital Editions software to deregister the old account. (It wouldn't be within the spirit of ADE's terrible user interface to make this easily discoverable.)
Restart ADE, and you will be able to enter your new account details.
If you have any devices registered with your old ID, ctrl-shift-E to Digital Editions while the device is connected will remove the old registration from the device.
Remember if you have any DRM books registered with your old account, you can't read them with the new one.
It doesn't sound as if you have either of those issues; more in case anyone else picks up this thread.

Why do colors slightly change when copying from Illustrator to Photoshop?

I want to copy a object from Illustrator and paste it into a Photoshop document with the same color mode and profile.
When I use the Eyedropper Tool on the pasted object in Photoshop the color seems to be slightly off.
Both the Illustrator and the Photoshop document have their Color Mode set to RGB
Both Applications are using synchronized color settings.
This also happens when the object is dragged or Placed. It does not happen when copying from Photoshop to Illustrator.
Could there be a problem with my color management settings? What actually happens to the color information, when it is copied from one application to another?
Thanks for any help.

Why the heck are people still using these nonsensical hexadecimal HTML numbers?
Since some decades we got used to describe RGB values by decimal numbers 0...255.
Both your value sets are practically the same, but how they were converted from one
to the other, that requires an investigation, how Adobe workflows are distributed
between California and Bangalore.
Best regards --Gernot Hoffmann

Error when copying files from SSD to HD

Build 9926 (clean install not upgrade)
When copying file (drag & drop) from either an SSD>> HD or HD>>SSD I get the below error. This is definetly build specific and not hardware related. I have re-installed 9926 from an MSDN ISO 3x with the same results.
Both drives are local. Both drives have been checked and are ok.
Any ideas?

Hi Dyamixx,
Please consider to run process monitor to further look at this issue:
Troubleshooting with Process Monitor
After that, please upload the trace into OneDrive and then post the shared link here.
Best regards
Michael Shao
TechNet Community Support

FI/accounting document tab not working in migo or mb03

Dear Experts,
In our test server the accounting entries are not showing when we are trying to check those through MIGO(display) or mb03 by clicking FI document tab.
Although all are valuated entries, what could be the reason, message is coming "No subsequent document found in Accounting"
Message no. RW011
Diagnosis
All documents generated in Financial Accounting for object type 'MKPF',
reference document number '5000341600' and organizational unit '2010' should be displayed.
System Response
No accompanying documents were found in Financial Accounting
through mb03 it is showing
Material document 5000341600 does not include an accounting document
Message no. M7082
Diagnosis
The system cannot find an accounting document for the material document 5000341600.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B.
Regards,
Alokesh

Hello,
Check Account assignment category Goods recipt check box is flaged or not,
SPRO---PurchasingAccount assignment category- check the falg mark for related account assignment.
Check Material type of material is that material is valued or not in OMS2.
Regards
Mahesh Naik.

Accounting Revenue distribution not copied when copying a bill

Similar Messages

Maybe you are looking for