Accumu. depr. and current year dep

we have one asset 1000192 around APC: 35000 USD, acquire in previous year 2012.9.1, accumulated depreciation is around 5700 USD, current year depreciation is 390 USD, we create a new asset 1000193 by refernece this asset, then use ABSO to post APC and accumlated depreciation, after I click "display document", I enter around 5700 USD in ord. dep field (cumulat.) then around 390 USD in "current year" field. after I post, system post 5700+390 to value adjustment field in asset explorer.
is there any way that we can migrate 5700 and 390 separately to accumlated depreciation and current year depreciation in asset explorer instead of " value adjustment"?
also is able to set asset 1000193 acquisition date to be previous year 2012.9.1 instead of current date 2014.7.3 as value date?

Hi,
What transaction are you performing in ABSO exactly?  What is the transaction type you use?
If you do a transfer, then the system will always post a value adjustment for already posted depreciation depending on your period control for retirement/transfer in your depreciation key.
Maybe you want to check also the setting in the transaction type regarding taking over the depr.start date: see the F1 Help on Indicator: "Transfer adopting dep. start date" in e.g. AO76.
As far as I know from testing in the system, the behaviour for choosing a value date before the posting date is that in ABSO you get an error "Enter asset value date in the same year as posting date ........".
Regards,
Brigitte

Similar Messages

  • Previous Year Closing and current year opening Bal not matching in FS10N

    Hi for some GLs Previous year's Cumulative balance and current year's opening balance is not same. What could be the reason?
    For example The closing Balance for FY 2008 is Rs.125398 where as in the current year opening balance it is displayed as some 65123 in the cumulative balance column what could be the reason. Is there any option for layout change at FS10N

    Hi Srini,
    Run F.16 and F.07 again and check.
    Or tally your figures with normal transactions only in FBL3N.
    And do checking GL balances for all the GL accounts except your vendor recon account and customer recon accounts.
    Hope this might help a little.
    Thanks,
    Srinu

  • How  to modified automatic batch number with plant and current year details

    hi all,
            i want tomodify automatic batch number with plant and current year details. if any one understand plz explain.
    thanks,
    radhakrishna.

    Hi,
    I am not clear what is u r requirement exactly?
    I  mean you don't want automatic batch no or modify the batch no.  with plant means and Current year details means.  Can give details more
    Regards
    Ganesh

  • Macro issue: Current Year and Current Year +2

    Hi Macro experts
    I have a view in monthly buckets. I like to copy values for one KF to another from current year to only Current year + 2. I have made following macro but it dosen't work:
    AT: Initiate Input Row 
    Copy Sales FC to Al FC Input Y+2 : ( 24 Iterations :  M 03.2009 ;  M 02.2011 )
    IF
    Check year
    YEAR( DATE(
    Row: Customer Forecast ( Frm  M 03.2009 )
    =
    (YEAR( DATE( TODAY ) )
    +
    2
    Row: Annual Target Input ( Frm  M 03.2009 ) =
    Row: Sales Forecast ( Frm  M 03.2009 )
    ENDIF
    I get following message when I do the check:
    Fehlerhafter logischer Ausdruck "(YEAR(  4D4HPL3ENNRMKCXE1NULTI4LX  )  +  2  )":
    Please help (If there is an easier way to make the macro please let me know)
    Thanks
    Sun

    Hi
    Thanks for the answer. It is a rolling period dataview.  I understand you suggest the macro as:
    AT: Initiate Input Row 
    Copy Sales FC to Annual FC Input Y+2 : ( 24 Iterations :  M 03.2009 ;  M 02.2015 )
    Row: Annual Target Input ( Frm  M 03.2011 ) =
    Row: Sales Forecast ( Frm  M 03.2009 )
    But the problem is that when it is rolling period it will then also copy values in current year+3 and that is not acceptable. That is why I canu2019t use this macro. Values in current year (jan. month to dec. 2009) to (jan. month to dec. 2011)
    Br
    Sun

  • Difference in last year and current year Cost Run (CK11N)

    Hi Experts,
    I am getting the difference in Costing Run as explained below,
    1, Costing Run of year 2009 is not picking the two overheads as against 2008.
    What may be the couse, all overhead keys are extended to year 2009.
    Waiting for your reply.
    Sham

    Hi,
    Please check the validity of those 2 overhead rates. Probably the validity is till 12/31/2008, that's why it is not picking. In that case you can create another row with validity dates from 01/01/2009 to 12/31/2009 or 12/31/9999 as the case may be.
    The path for the same is mentioned below:
    IMG>Controlling>Product Cost Controlling>Product Cost Planning>Basic Settings for Material Costing>Overhead>Costing Sheet:Components>Define Percentage Overhead.
    Thanks,
    Prithwiraj.

  • AA634 : Write up of current year's depreciation

    Hi,
    I believe we cannot write up current year dep but only of the previous fiscal year.
    Is there any way to write up for current year's depreciation?
    I cannot post a negative amount in uplanned depreciation. If I enter the amount of the curreny year dep in ABZU with 700 Ttyp it give me below message
    Correction to ordinary dep. greater than acc. dep. in area 01
    Message no. AA634
    Asset affected: 000006011037-0000
    Diagnosis
    The line item cannot be posted, since the correction to ordinary depreciation in area 01 exceeds the cumulative ordinary depreciation.
    The error can occur during a transfer, a write-up, or post-capitalization.
    Procedure
    Correct your entry.
    Any other way
    thnks,
    JR

    Hi
    Have you able to get threw your error...
    I am facing with same problem....
    My asset value on 31st March 2010 is around 2,00,000. But during the year it is gone upto 13 Crores..
    But we have provided some excess dep. on the same. so we plan to use ABZU.. Bus faced with the following error.
    "correction to ordinary dep. greater than acc. dep. in area 01"
    Any updated
    Regards
    Krishna

  • Reporting on Previous Month/Current Year - Jan 09 fix

    I currently have about 10 reports that are being filtered to only show data on the repository variables for :
    PreviousMonth and Current Year.
    When Jan 1, 2009 comes around, these reports will be kicked off to show Decemeber of the Current Year, so December of 2009.
    What is the best/easiest way to fix this problem for the future?

    What Shiva meant was to let YEAR be a Presentation Variable that the user can select from, say a drop down list of "years."
    But consider this. Whenever the month of the "system date" is January, you want the year to be one less than the "current year." For all other months, you want the year of the "system date."
    PrevYear = CASE WHEN MONTH(Calendar."System Date")=1 THEN YEAR(TIMESTAMPADD(SQL_TSI_YEAR, -1,Calendar."System Date")) ELSE YEAR(Calendar."System Date") END
    And since you weren't sure about how to do the previous month...
    PrevMonth = MONTH(TIMESTAMPADD(SQL_TSI_MONTH,-1,Calendar."System Date"))

  • Uploading current year capitalised assets and accum depn

    Dear sir,
    I am working with asset module , I have configured and uploaded legacy assets for previous year capitalised assets. when i came to upload current year capitalised assets , *** and accu depn feild were in display mode and i have uploaded values in takeovers tab  ( accu depn in amount posted--from capitalisation date to 30092010 and *** value in transaction with asset value date as capitalisation date,trn type is 100 and *** values)......
    my configuration is as follows........
    1. Take over date......01012011
    2. last period for depn posted .........2010,09
    3. ord depn start date................01012011 (for all assets)
    but  what my problem is ...................after run the depn for Jan 2011........... accum depn is getting debited and depn is getting credited along with values posted in legacy system also.......... but my client is asking me to post current month depn accordingly............ .
    I am requesting all ,,,,,,,,,, kindly help me on this issue and procedure for  current year capitalised assets and its oasv transactions...........?

    Dear Ajay,
    I am thankfull for your reply ............................. let me tell you the scenario.....
    current year capitalised asset------  apc-50000
                                                              acccum depn till 31dec2010----1666.67(depn per month  416.6666667)
                                                              depn- SLM -USEFUL YEAR-10 (usefull year basis depn)
                                                              capitalisation date---04092010 and
    for above sceanario we should not post depn from capitalisation date to 31 dec2010 because client is already posted depn in non sap system. so If i put ord dep start date as capitalisation date system calculates depn from capitalised date to 31 dec 2010 and posts along  with jan depn -
    but it is enirely wrong for this scenario. according to our scenario we can post depn for the month of jan in sap .......
    I hope now you clear about scenario,,,,,
    Regards,
    ummi.

  • Expression - First date and last date of current month, current year

    Hi
    I need to have 2 ssrs expression as I can use  as default parameters in my report where I can -  out from my Time dimension, get the
    first date of the current, current year - and one where I get last date, current month, current year.
    My data source is a SSAS cube and my timedimension is structured like this:
    [Time].[Days].&[2009-01-16T00:00:00]
    Any suggestions how to solve this ?

    Hi ,
    You can use below in Default Values in ssrs ;
    for first Day of current month and year
    ="[Time].[Days].&[" +Format(dateadd("m",0,dateserial(year(Today),month(Today),1)), "yyyy-MM-dd")+"T00:00:00]"
    output will be ;
    [Time].[Days].&[2014-09-01T00:00:00]
    For last day of current month and year
    ="[Time].[Days].&[" +Format(DateSerial(Year(Now()), Month(Now()), "1").AddMonths(1).AddDays(-1), "yyyy-MM-dd")+"T00:00:00]"
    output will be ;
    [Time].[Days].&[2014-09-30T00:00:00]
    Please correct me if I misunderstood your requirement.
    Thanks
    Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

  • Current Year and current month?simple question

    How can i get four Digit current Year and two digit current month. So if is march it should get me as 03 and the Year as 2002. Please do help me, is a simple question isn't it ?. Thanks for your earliest response.
    Thank you.

    i have a directory structre of the format
    REPTS2000209/E200209-98000001
    in which 2002 is current YEAR
    09 is current month
    and 9800001 is the code i would submit(list box) from a form
    so what i need is a program that can generate the above path and open that particular PDF file
    so basically E200209-98000001.pdf is the PDF file.
    i am submitting it from JSP page. PLEASE HELP ME how can i program.

  • Parameter for current year and previous year

    Hi all,
    I currently have 2 reports where the query is the same except in the where clause I have it filtered to current year and previous year based on the List_Date. I would like to make this one report with a parameter of Current or Previous year.
    Would I create 2 more datasets one for current and another for previous? I would think there is a easier way. Any help or direction would be great.  

    If you define a parameter in SSRS, you can use it's value in your query. Just make sure the parameter name, and CASE (SSRS is case sensitive when it comes to parameters) are the same in SSRS and your query. There's a parameter tab on the dataset properties.
    It SHOULD auto fill, but it never hurts to check, just in case.
    Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.
    Yes it did auto fill the parameter tab in the dataset and I get a parameter to enter the year when I preview the report. Still a little confused on how I do current or previous year. Are the next steps what I need to do?
    @yearParam parameter:
    1) Create  Available or Default values 
    2) Current and Previous year as label
    3) For Value do I need to use a expression for current year =Year(now()) and previous Year?
    4) Add a filter on the tablix for list_date?

  • Current Year and YTD in Report/Query

    Hi to all the experts here,
    I have a report requirements to show the cost in the report for the current fiscal year and last fiscal year filtering by YTD month in the report as below when the user enter the month: 12.2010, the month: 07.2010 is the first posting period of the fiscal year.
                          07.2010    08.2010     09.2010      10.2010     11.2010     12.2010     Last Fiscal Year     Last 2 Fiscal Year
    Current Year           10,000    20,000       20,000       20,000       20,000    20,000       100,000                  90,000
    Last Year              15,000    15,000       15,000       15,000       15,000    15,000       120,000                 100,000
    I know that I need to create customer exit to archieve this, but I not sure what to do to get this, I have problems on getting the figures for the Last Fiscal Year and Last 2 Fiscal Year here.
    Please help. Appreciated alot. Thanks alot!

    Hi
    The Fiscal year/period (0FISCPER) in your BW system must be maintained as starting from 07.2010 onwards then you can try the below:
    In the report Filters you can use the manual entry variable for 0FISCPER where the user can input the month restrictions.
    Then for the Current year and Previous year amount KFs you can create 2 customer exits for Current year and Previous year on 0FISCPER characteristic where you can set the interval using the values input by the user in the selection screen. (eg. If user enters 7.2010 to 12.2010 you can use these values in the exit code to set the interval for the customer exit variable.)
    This way you can have the amounts restricted by the period entered by the user in the report.
    For the structure you have mentioned in your post you can have the 0FISCPER in columns and then the KFs current/previous year in the rows so that once you have the Current/Previous YTD as created above, you will see the individual month period values also in the drilldown.
    Hope this helps.
    Regards,
    Ninad

  • How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

    Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe.  I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar.  How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!!  I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
    Thanks in advance. 
    Colin

    Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
    Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
    OT

  • How to show current year and last year sales in a WEBI Report

    Hi Guys
    How can show current YEar Sales in one column and Last YEar Sales in the other column based on a user prompt for the Current YEar Column.
    For Example is user enter 2010 for Year how can i show a Column for Sales-2010 and Sales 2009.
    Thanks

    If you can modify your Universe add an object named New Object Last Year whose SQL is:( yourTableName.Year + 1)
    Then in WebI create two distinct queries in your query Pane. In the first one you could do this:
    Query 1:
    objects: Year, Sales ... etc.
    filters:   Year Equal to '1. Prompt Year'
    Query 2:
    objects: Year, Sales ... etc.
    filters:    New Object Last Year Equal to '1.Prompt Year'
    Then in your report you can drag each object on their respective columns.
    If you don't want to use two distinct queries, use one like this:
    Query 1:
    objects: Year, Sales ... etc.
    filters:        Year Equal to '1. Prompt Year'
                 Or
                      New Object Last Year Equal to '1.Prompt Year'
    Edited by: PadawanGirl on Jun 23, 2011 6:28 PM

  • First and last day of current year as a date object

    Howdy...
    can someone please help me out... i need a fast way to get the first day of the current year as a date object and the last day of the current year as a date object...
    big thanks for any sample code...

    import java.util.Calendar;
    // snip
    Calendar firstDayOfYear = Calendar.getInstance(); // will initialize it with today
    firstDayOfYear.set(Calendar.DAY_OF_MONTH, 1);
    firstDayOfYear.set(Calendar.MONTH, Calendar.JANUARY);
    Calendar lastDayOfYear = Calendar.getInstance(); // will initialize it with today
    lastDayOfYear.set(Calendar.DAY_OF_MONTH, 31);
    lastDayOfYear.set(Calendar.MONTH, Calendar.DECEMBER);Rommie.

Maybe you are looking for