ACE 4700 configuring SSL termination weblogic server 10.3.6

Hello,
Im trying to configure an ACE 4700 so that SSL termination is done on the ACE and HTTP reaches the weblogic server instance.
I have a working setup of a Apache reverse proxy doing SSL offloading and using a weblogic module and that works fine
Was reading http://docs.oracle.com/cd/E23943_01/web.1111/e13709/load_balancing.htm#i1045186
Can anyone point me to a working config example for doing this with the ACE4700 or give me some directions here?
Kind regards,
Laurens

Hi Laurens,
Here is a basic configuration for SSL termination:
rserver host test
ip address 10.198.16.98
inservice
rserver host test2
ip address 10.198.16.93
inservice
serverfarm host test
rserver test 80
    inservice
rserver test2 80
    inservice
ssl-proxy service TEST
key cert
cert cert
class-map match-all VIPSSL
2 match virtual-address 10.198.16.122 tcp eq https
policy-map type loadbalance first-match test
class class-default
    serverfarm test
policy-map multi-match clients
class VIPSSL
    loadbalance vip inservice
    loadbalance policy test
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 112
    ssl-proxy server TEST
interface vlan 112
ip address 10.198.16.91 255.255.255.192
access-group input Allow_Access
nat-pool 1 10.198.16.122 10.198.16.122 netmask 255.255.255.192 pat
service-policy input NSS_MGMT
service-policy input clients
no shutdown
Cesar R
ANS Team

Similar Messages

Need info to configure SSL for Portal Server in EP6SP2

Hello,
We need to configure SSL for Portal Server. We are using J2EE 6.20 Patch 25 and EP6SP2P4. The ITS is already using https and it creats lots of Session issues since Portal is not in https.
Is there any OSS Note or How to guide to configure Portal to use SSL.
Thanks.
- PK

Hi Marcel,
Thanx for your Post, I have a Question, we will use CISCO for load balancing and SSL termination but I have a big issue, the URL in the portal applciation is always the same ant the URL in the borwser, I guess al the other URL´s are in the Frames, how will we configure the SSL termination for the login page in example if the URL in the Browser appears always the same?
Thanx in Advanced!!!

Please let me know LDAP Configuration in Oracle Weblogic Server 10.3.2

Hi,
Please let me know LDAP Configuration in Oracle Weblogic Server 10.3.2.Please give me the steps to configure the LDAP in weblogic 10.3.2.

Hi,
You can check http://download.oracle.com/docs/cd/E15523_01/doc.1111/e14142/console.htm#i1075285

How can I configuration MBean in weblogic server using the console ?

How can I configuration MBean in weblogic server using the console ?
I hear people talking about mbeans in weblogic server I have look in the console I can not find where , or how to do it.
can some body explain that or a link that explain it, how to do it on the console ?

Hi,
Registering Custom MBeans from Admin Console is not yet possible. But yes there are ways to Configure and Utilize Custom MBeans ...
http://weblogic-wonders.com/weblogic/2010/02/16/registering-and-invoking-custommbeans/
Thanks
Jay SenSharma

Enabling ssl on Weblogic server 5.1 using Verisign certificate.

"Hi,I am trying to enable ssl in Weblogic server 5.1The properties set in my properties file areweblogic.security.certificate.server=servercert.pem(sent from the verisign via email)weblogic.security.key.server=cp8212-2d2-key.der(generated by the Certificate Servlet of Weblogic Server)

"Hi,I am trying to enable ssl in Weblogic server 5.1The properties set in my properties file areweblogic.security.certificate.server=servercert.pem(sent from the verisign via email)weblogic.security.key.server=cp8212-2d2-key.der(generated by the Certificate Servlet of Weblogic Server)

Apache 2.2 21 forward Proxy 2 way SSL for weblogic server as a client

Hi All,
Currently, i am trying to implement a forward SSL proxy. The client will hit my apache server which in return will hit a IIS Server.
scenarios 1
client(weblogic)--*2 way SSL*Apache(forward proxy)*2 way SSL*-- IIS
If i were to implement 1 way ssl, i am able to see the content of the website.
client(weblogic) --- Apache(forward proxy) --- IIS
If i were to launch the web browser from the client machine (with the client certificate imported in the browser), i am able to view the content in the IIS. But if i were to simulate the connection from weblogic server, it just give me end of file exception (response contain no data) on the logs.
Below is my configuration
Listen 8080
<VirtualHost default:8080>
ServerName serverA
ErrorLog "logs/ssl_error_log"
CustomLog "logs/ssl_access_log" common
SSLProxyEngine On
SSLProxyMachineCertificateFile /certificate/servercert.cer
SSLProxyCACertificateFile /certificate/rootCA.cer
SSLProxyVerify require
SSLProxyVerifyDepth 10
ProxyRequests On
ProxyVia On
AllowConnect 12345
<Proxy *>
Order allow,deny
Allow from all
</Proxy>
</VirtualHost>
For 2 way SSL, will the client forward their client certificate to my apache proxy server and apache will on the client behalf forward the client certificate to the IIS server for authenication?
Or the SSL authenication still happen between the client (weblogic) and the end server (IIS) bypassing the proxy server.
Please help.

It is a domain wide setting. Can you not create a new domain? I do not think that you can handle it from web.xml. I have never seen such thing in web.xml.

How to configure SSL in Weblogic 9.0 and later versions.

Hello all,
I am Nikhil.
I am trying to configiure SSL on BEA application server by using the below link. But am unable to understand the process.
http://e-docs.bea.com/wls/docs90/secmanage/ssl.html.
Can any one provide me Step by Step process to Configure SSL.
Thanks,
Nikhil.

Well , Are you trying to configure SSL using demo certs? If yes , Just go to server general tab and enable SSL Poret ( By default its 7002 , You can specify any other port too if it is been not used by any other process)
If not Demo , and you are using your own custom trust and identity certs , then you need to do this:
-Login to weblogic console
-Select the Server -> keystores-> customIndentity and Custom trust
- Input the details of your Keysotres in the configuration part
-CLick on save
-CLick on SSL tab , do the configuration of your private key alias and passowrd.
-Click Save
DOnt forget to check the SSL Port.
HTH
Sumit Kumar

Cannot configure JAAS in weblogic server 10

Hi,
I am new to weblogic and at present am using weblogic server 10. Can anyone please specify the steps to configure my custom JAAS module in weblogic?
Thanks
Surya

While still using PAPI, try also adding b1oracle.jar, b1base.jar and b1util.jar to your ADF project.
These jars could be found from your BPM Studio installation.
HTH

How write rmi-iiop over ssl with weblogic server 6.1 - No server found

//New
Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.3
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
I have also try
env.put ("java.naming.provider.url", "corbaloc:iiop://localhost:7002");
but it throws the following error
javax.naming.InvalidNameException: url does not conatin !!!
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

"oliver" <[email protected]> writes:
The SSL support is poorly doc'd right now. We have fixed this and
updated the way you do things in SP2. Please either wait for SP2 or
contact support.
andy
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.3
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
I have also try
env.put ("java.naming.provider.url", "corbaloc:iiop://localhost:7002");
but it throws the following error
javax.naming.InvalidNameException: url does not conatin !!!
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

How write rmi-iiop over ssl with weblogic server 6.1?

Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.4
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
} else {
env.put ("java.naming.provider.url", "rmi://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

"oliver" <[email protected]> writes:
First off 1.4 isn't supported as yet. That is probably part of the problem.
You also must use a corba URL from the client in order for this to work for instance:
If you are using WLInitialContextFactory:
corbaloc:iiop:localhost:7001/NameService
If you are using CNCtxFactory:
iiop://localhost:7001
Using rmi: is the wrong thing to do - that will use jrmp or t3.
However, I suggest that you raise a call with support since there is
some other trickiness with getting SSL working. We hope to have this
much improved in SP2.
andy
Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.4
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
} else {
env.put ("java.naming.provider.url", "rmi://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

Configuring SSL for SOA Server

Hi All,
I wrkin on SOA suite 11g. I am tryin to implement transport level security. Firstly 1-way authentication and than 2-way mutual authentication. For that I need to enable the SSL for SOA server which is managed by the WLS admin server. As per my knowledge the WLS comes with demoidentity and demotrust keystores. If I need to configure the SSL for SOA server do i need to create new keystores and CA,s or I can use the demo keystores.
Now, in case i need to create new keystores than can i do the same using keytool utility. Additionally, is it possible to make CA using keytool utility? If yes, kindly provide me some links about how to do the same.
Thanks in advance.

Hi Shomit,
If I need to configure the SSL for SOA server do i need to create new keystores and CA,s or I can use the demo keystores.You can use the Demo keystores for dev purpose but it is NOT recommended to use demo keystores for production use.
in case i need to create new keystores than can i do the same using keytool utilityYes, you can do it using Keytool utility.
is it possible to make CA using keytool utility?Actually you can generate a self-signed cert and use that as a CA for signing CSR's.
kindly provide me some links about how to do the sameYou should get everything here -
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13707/ssl.htm#i1200848
Regards,
Anuj

Discoverer and OBIEE configured on same weblogic server

Can Oracle BI Discoverer 11G and OBIEE 11G be configured on the same weblogic server?

Did you mean the same weblogic server instance?
Most likely, what you can do is to install those 2 components as independent server instances and keep those under the same domain. Each would require 4GB of available memory (physical + swap).
Thanks.

8.3 SP1 tested configuration JDK for WebLogic Server (App Server)

The base 8.3 had JRockit JDK as well as Sun JDK as a tested configuration.
Later 8.3 SP1 only has Sun JDK as a tested configuration.
Can anyone comment on this. If I decide to deploy 8.3 SP1 with the latest hotfix available should I just use the tested Sun JDK for the app server?

JRockit JDK is supported with P6 EPPM 8.3 SP1 and any latest hotfix. The tested configuration for SP1 and above is an indication that additional certification of latest JDK has been done. It does not necessarily mean you need to upgrade to it although recommended. Review the SP1 patch readme for more information.

How to configure SSL for Oracle Weblogic Server

Hi,
Please help me to configure SSL in oracle weblogic server.
If possible, please provide step by step to configure SSL.

this should help
http://weblogic-wonders.com/weblogic/2010/05/19/configuring-ssl-on-weblogic-server-custom-identity-custom-trust/

How configure SSL for Oracle Lite

Hi all,
I'm trying to configure SSL but I've many doubts.
I already have one SSL certificate, I read in the documentation that is necessary to use the keytool.
Someone can help me for use this tool?
tks,
Everson

this should help
http://weblogic-wonders.com/weblogic/2010/05/19/configuring-ssl-on-weblogic-server-custom-identity-custom-trust/

ACE 4700 configuring SSL termination weblogic server 10.3.6

Similar Messages

Maybe you are looking for