ACE show serverfarm - failure counter does not incremented on Probe-Failure event

Hi,
Despite of probe-failure the failure counter is not incremented. Is there any correlation between the configured probe and the failure counter?
(Custom script probe is used for this serverfarm)
# sh serverfarm xxxxxSt
serverfarm     : xxxxxSt, type: HOST
total rservers : 2
                                                ----------connections-----------
       real                  weight state        current    total      failures
   ---+---------------------+------+------------+----------+----------+---------
   rserver: xxxxx6
       10.222.0.90:8000      8      OPERATIONAL  13         157        0
   rserver: xxxxx7
       10.222.0.92:8000      8      PROBE-FAILED 0          0          0
Thanks,
Attila

Hi Attila,
The Connection Failure counter under show serverfarm is for Loadbalanced Connections which are failing.
If Probes are failing, this counter will not increment.
The Connection failure counter can increment for various reasons some of them are,
- Server not responding to the SYN packet sent by ACE for Loadbalanced connection
- Server sending Reset to the SYN packet sent by ACE for Loadbalanced connection
To check on stats for Probe, you can run "show probe detail" command.
Hope this helps,
Best Regards,
Rahul

Similar Messages

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • The reproduction counter does not work correctly

    the reproduction counter does not work correctly

    Yes it is a bug, and no one is being lazy.
    People volunteer their time to bring you a mail client and as soon as there is anything like a problem, someone is being lazy. Seriously, that is not acceptable. Before commenting on the contributions of others, please advise what your contributions have been.
    Bug [https://bugzilla.mozilla.org/show_bug.cgi?id=1107844 1107844 ]refers

  • Downloading a dmg file shows in activity but does not show in downloads folder

    downloading a dmg file shows in activity but does not show in downloads folder

    Maybe
    iOS: Unable to import photos to computer
    Did it show before?
    If you connect to another PC does the iPod show up in My Computer?
    Have you installed only camera or scanner programs on your computer?

  • HT4623 e while updating iOS. When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    iPad 2 froze while updating iOS 7.0.4.  When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
    http://osxdaily.com/2010/12/04/ipad-dfu-mode/

  • TS1702 My calendar app (Tuesday 1 Calendar) does not allow me to add events. There is no Calendars or + at the top of the app.

    My calendar app (Tuesday 1 Calendar) does not allow me to add events. There is not a (Calendars or +) at the top of the application. Previous iPhones I have had had this feature. Please advise

    Go to Settings>iCloud, turn Calendars to On.

  • Character counter does not display data on IE when counter is 0

    Hi,
    I am implementing a character counter in ADF using Javascript (referencing this http://www.oracle.com/technetwork/developer-tools/adf/learnmore/10-char-input-counter-169133.pdf).
    I display the string --> 'x' characters left
    The problem that I am facing is: when my character counter becomes 0 (can no longer enter any text, the maxlimit of the input field is reached) then on IE browsers, it does not show the character '0'. It displays a blank. On Firefox and Chrome, however, the UI gets displayed as expected i.e. 0 characters left.
    Can I get any pointers how to fix this on IE. Have tested with IE versions 7,8,9. JDev version is 11.1.1.5.0
    Here is the code snippet that I am using:
    Javascript:
    function showCharacterCount(event) {
    var keyCodePressed = event.getKeyCode();
    if (keyCodePressed == AdfKeyStroke.TAB_KEY
    || keyCodePressed == AdfKeyStroke.ARROWLEFT_KEY
    || keyCodePressed == AdfKeyStroke.ARROWUP_KEY
    || keyCodePressed == AdfKeyStroke.ARROWRIGHT_KEY
    || keyCodePressed == AdfKeyStroke.ARROWDOWN_KEY) {
    event.cancel();
    else {
    textfield = event.getCurrentTarget();
    textfieldValue = event.getSource().getSubmittedValue();
    textfieldLength = textfieldValue.length;
    textfieldMaxLength = textfield.getMaximumLength();
    o = AdfPage.PAGE.findComponent('characterCounter');
    characterCounterValue = o.getValue();
    characterCounterValue = textfieldMaxLength - textfieldLength;
    o.setValue(characterCounterValue);
    UI:
    <af:panelGroupLayout id="pgl3" layout="horizontal">
    <af:outputText id="characterCounter" clientComponent="true" value="325"
    inlineStyle="text-align:right; display:block; width:100.0px;"
    binding="#{viewScope.myBean.characterCounterBndg}"/>
    <af:outputText value="characters left" id="ot7"
    inlineStyle="padding-left:5.0px;"/>
    </af:panelGroupLayout>
    <af:inputText id="it2" rows="4" columns="53"
    value="#{viewScope.myBean.text}" maximumLength="325" clientComponent="true"
    simple="true">
    <af:clientListener method="showCharacterCount"
    type="keyUp"/>
    </af:inputText>
    Thanks in advance.

    Try converting from dynamic data, that seems to take care of the problem. Also, you could use the regular field point VIs instead of the FP express VI. Check out the attached VI.
    -Alan A.
    Attachments:
    FP_Read.vi ‏30 KB

  • The TV show I just bought does not register in the cloud and thus I can't watch it . . .

    Here's what's happening:
    I buy this new show called "Bodertown: Laredo." After the purchase is complete and the 'Play it now' window pops up I choose to shop for more shows instead. When I get back to the show to watch it I find it not listed in my purchased folder and in iTunes it does not have a cloud next to the title. So I purchase it again and now it says that I already own it. This catch 22 goes on for a while until I have enough of it and just purchase the show a second time. I then watch it by pressing play when the play window appears and it plays fine. But when finished it still doesn't show as purchased and still isn't in my purchased folder. So then the next day I report a claim on my itunes account and explain what has happened, customer support nullifies the transaction and credits my account.
    The strange thing is that it only happens with this one show. If I buy anything else it registers fine. 

    Hello,
    Could you please try and import the .mulib file using the Library (Windows > Library) panel? Click the import button (highlighted int he image below) and browse-to & add your add-on to Adobe Muse.
    Hope this helps.
    Regards,
    Suhas Yogin

  • My roboform (ver 7.5.7) toolbar does not show since i updated firefox to 7.0.1 in the troubleshooting info. it shows as enabled. it does not appear in the menu of view/toolbars

    as above, when i updated firefox to 7.0.1 the toolbar for roboform disappeared. updating roboform did not fix it. it does not show up as a tool bar in the view/toolbar tab. i made sure the firefox browser option was enabled in roboform.

    Try to read raq here;
    * http://www.roboform.com/support/faq/roboform#toolbar

  • Counter does not start at zero sometimes

    Hi,
    I wonder if someone would be able to give me a little advice, with a counter I am having trouble with.
    First, about my application. I am (trying to) control a point on wave switch from labview. The switch turns on when it receives a digital 1 and off again when that signal returns to a 0. While the switch is on it sends out a signal which is constantly 5V but has a zero pulse when it's 'input' waveform passes through zero. Additionally the switch has a hardware setting that allows you to set at which point in the waveform the switch will turn on. (i.e. if you set 0 the switch turns on at the begining of the next voltage cycle after receiving the on signal, if you put 90degrees it waits until 90degrees into the voltage cycle to turn on).  I want to control the number of waveform cycles the switch 'lets through' and the point at which it turns on.
    In labview I send a digital 1 to turn the switch on and use a counter to count the number of pulses coming back from the switch, when the number of pulses corresponds to the number of voltage cycles I want I send a 0 to turn the switch off. This works fine when I have the switch hardware setting set to turn on at 0 degrees, but when I increase this angle setting past about 10 degrees the counter which I am using to count the pulses goes a bit awry and seems to start at anything from 6 to 78 or more, causing my application to fail.
    Does anyone have an idea why this might be happening. I have looked at the signals coming from the switch on a scope and they look the same in both cases, i.e. the signal does not appear to be more noisy when I increase the angle setting. Is there some setting I should be using in labview when starting counters that I am not aware of (I am new to labview)?
    Thanks for any help! (I code post my code if it helps when I get back to the lab tomorrow)
    Andy

    Attaching my latest code in case it is useful.
    Attachments:
    switch test with scope3 and output file triggered.vi ‏73 KB

  • "Show all filename extensions" does not work!

    I want to be able to see the file extensions of all my files.  I go to Finder->Preferences->Advanced, and then I check the "Show all filename extensions" checkbox, yet it still does not work!  I tried rebooting my computer and double checking if that checkbox is still checked, and it is, and it still does not work!
    Any help?

    Nevermind.  I figured it out.

  • List View webpart from subsite to Top site shows random error "List Does not exist"

    Hi All,
    We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
    shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
    Rohit Pasrija

    try these links:
    http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
    http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart

  • Pdf file shows open but document does not appear on monitor

    Using Illustrator CS2 for pdf documents. Have a few files created with CS2 that show as being open in the Tool Bar "Window" but document does not appear on monitor.

    Try Ctrl-Y for preview.

  • Playing back music on Itunes stays on 0.00 and counter does not move

    Hi When I try to play any music in Itunes the counter stays at zero 0.00 and does not move along. I found this thread which best describes my problem so appears to affect quite a few others: http://discussions.apple.com/thread.jspa?threadID=1205504&start=30&tstart=0 however I have tried all the possible solutions discussed on there without success. My operating system is XP Pro. This has happened several times in the past and quite frustrating (only a reboot normally fixes it but there has to be a reason why this keeps happening). Music and video plays fine on other media players (same as users in the thread attached). My wife's Itunes also does it and she is running Vista on her laptop. By the way I have the latest Itunes updates/versions etc and have also tried restoring to earlier backups - all without success. It was playing fine the other day with exactly the same updates just not today. Thank you for any help.

    Same here, only it will sync, but extremely slow!

  • When click show all downloads library does not list them find them?

    On new Firefox when I click 'show all downloads, the library window appears but does not list downloads only list some bookmarks. How and where can I find them, as I wont to clear them where appropriate.

    If You Are Using Any Third Party Download managers To Download Files, It Will Not Appear In The Download Lists OF Firefox.
    Kindly Check Your Downloads Folder, Everything you Have Downloaded Will Be There By Default.

Maybe you are looking for