ACE20 - Loadbalancing across 3 virtual servers sharing the same address

I have 3 virtual servers sharing the same IP, just using different ports.
192.168.1.1:8000 = server1
192.168.1.1:8001 = server2
192.168.1.1:8002 = server3
I would like to loadbalance across all 3 with the following probe, looking for the URL.
http://192.168.1.1:8000/index.php
http://192.168.1.1:8001/index.php
http://192.168.1.1:8002/index.php
The config I have in place doesn't seem to be working... I probably configured this entirely wrong... not sure.
I need to understand what I missed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++
probe http WEB1-http-probe
   interval 30
   passdetect interval 5
   request method get url /index.php
   expect status 200 200
   connection term forced
probe http WEB2-http-probe
   interval 30
   passdetect interval 5
   request method get url /index.php
   expect status 200 200
   connection term forced
probe http WEB3-http-probe
   interval 30
   passdetect interval 5
   request method get url /index.php
   expect status 200 200
   connection term forced
! RSERVER
rserver host 192.168.1.1-rs
   ip address 192.168.1.1
   inservice
! SERVERFARM
serverfarm host WEB-sf-HTTP
   rserver 192.168.1.1-rs 8000
      probe WEB1-http-probe
      inservice
   rserver 192.168.1.1-rs 8001
      probe WEB2-http-probe
      inservice
   rserver 192.168.1.1-rs 8002
      probe WEB3-http-probe
      inservice
! STICKYGROUP
sticky ip-netmask 255.255.255.255 address source StickyGroup_WEB-HTTP
   timeout 60
   replicate sticky
   serverfarm WEB-sf-HTTP
! CLASS-MAP
class-map match-any WEB-cm-HTTP
    2 match virtual-address 192.168.200.1 tcp eq 80
! POLICY-MAP
policy-map type loadbalance first-match WEB-pm-HTTP
class class-default
    serverfarm WEB-sf-HTTP
policy-map multi-match POLICY
   class WEB-cm-HTTP
     loadbalance vip inservice
     loadbalance policy WEB-pm-HTTP
     loadbalance vip icmp-reply active
When I check the status of the RSERVER, the probes all indicate "FAIL"

Found my problem...
I failed to put in the "port" statement under the probe.
After doing this and then verifying the RSERVER status, all the probes now show as OPERATIONAL.
probe http WEB1-http-probe
port 8000

Similar Messages

Multiple Node Manager Instances and servers sharing the same domain home.

Hi,
We have a 8 man server weblogic cluster spread over 4 machines. Each machine runs 2 man servers each.
Each of the machine is configured to run node manager.
We use shared storage accessible to all 8 servers and all 8 man servers have the same domain_home.
Lets call it W:/domain
Now the problem we are facing is that node manager running on 1 machine is trying to access/control a managed server on a different machine after a machine restart.
eg.
ManServer1 Home : W:/domain/servers/server1 ====> runs on Machine 1
ManServer2Home : W:/domain/servers/server2 ====> runs on Machine 2
Problem is node manager on machine 1 is trying to restart man server 2. The path W:/domain/servers/server2 is accessible to Machine 1.
After a restart, what I assume is happening is that the nodemanager is checking all servers folder under Domain_Home/Servers and trying to restart servers instead of restarting only those which it should start. The config file has the server and machine assignment done correctly. Is there a way to make this configuration towork. Or do we need to create different domain_home's for different man servers like
Domain_Home for MS1: W:/domain/MS1 ( Server Home would be : W:/domain/MS1/servers/MS1)
Domain_Home for MS2: W:/domain/MS2 ( Server Home would be : W:/domain/MS2/servers/MS2)
Regards,
Atheek
Edited by: atheek1 on 03-May-2010 00:27

Thanks - We have tried putting 2 dad entries in file, but not sure how you connect. You only specify a port number, so how does it connect that to a db???

OC4Js on different servers sharing the same application

Does anyone have some suggestions to how I can get non-clustered mid-tier OC4Js to share the same application stored on a shared NFS mount?
Right now, what I've done is created the OCJ4_Dev1 on mid1 and OC4J_Dev2 on mid2, then changed their server properties for application and application deployments to point to the shared NFS, but different directories.
Is there some way they can use the same directory? I can think of a number of ways of doing this with links etc, but maybe has some better ideas? Basically, I want the same "source" for two different OC4Js, but without confusing the instance configurations.

I think there are many options around this, but a simple way I managed it was to have 2 windows accounts,and each with a different iTunes library. I think you can now share multiple libraries on the one account, I'm sure there's an answer in the support pages here.

Address Book - two users sharing the same address book

My wife and I have separate accounts on the same mac. How can she share access to my address book. I tried to copy it over to a new directory in the same path ie, users>name>library>applicationsupport>addressbook - but this didn't work and caused the dreaded spinning icon.

Checkout the macosxhints.com article "Share one Address Book among multiple users".

Sharing one iTunes library across multiple accounts on the same Mac

Hello, I've poked around at some of the posts dealing with sharing one iTunes music library across multiple accounts on the same Mac but it seems like this can only be done if the libary is moved to a shared folder. I realize this can be done but I was trying to share it the way it is described in a post on Apple support (See link below.). That post seemed to imply that you don't have to move the library from its original location (owned by account A, e.g.), rather just make a couple preference changes in the accounts, use fast user switching and voila. That doesn't seem to work. So my question is this: Is the only way to share one iTunes music library across multiple accounts on the same Mac to move it to a shared folder? I'm running 10.4.8 on an Intel iMac. Thanks in advance!
http://docs.info.apple.com/article.html?artnum=93195

After reading this and several other related threads, I am becoming thoroughly confused about all of this. I have a situation similar to the one that pokerpal described in the post dated January 7 at 8:06 pm, except that the music files on my system are located on an external hard drive. Everything else is pretty much the same though - I am the admin user (and the main iTunes user and maintainer) and my girlfriend is a standard user who has no music in her own iTunes library. She can see and listen to and make playlists from and sync her iPod with the music in this library from her account, and I can do the same thing, independent of her, from my account. And if I make a change to information within a song, she doesn't see it, and vice versa, and I understand that. What I don't understand is why when I add a song or an album to the music files by importing a CD or downloading something from the iTunes Music Store, she has no way of knowing that unless I tell her, and then she can add it to her library by using the "Add to Library" function. Is there no way of automatically updating her library files to add the new song(s)? We have almost 15,000 songs and videos in that library, and I don't even want to think about what might have to happen if the answer to my question is "no." Interestingly enough, if I put an update to a Word document in the same exact location (on the hard drive), we can update that and pass it back and forth all day - why is that such a difficult task for iTunes to accomplish?
Sorry I went on so long, but this has been building up for some time, and none of the solutions I've read about here have really been of any help, so I'm a bit frustrated and, as I said at the beginning, confused.
iMac G5, MacBook Mac OS X (10.4.8)

Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

It should be in the Users/ Shared folder.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
Regards
TD

ADFS server in NLB cluster unable to reach all servers in the same subnet

I have 2 ADFS (3.0) virtual servers (server 2012 R2 on VMware) in an NLB cluster (setup for Office 365 initially) and want to be able to use the SAML to connect to a couple of Linux servers in the same network to allow SSO to the Linux boxes.
It was working then stopped and now the primary FS server (FS1) cannot ping either Linux box or one of our WS08R2 file and print servers. It can ping all other servers in the same network.
I tried to get a packet capture with MS NetMon 3.4 but it only picked up the successful ping requests.
Firewall is disabled but that made no difference.
NLB cluster configured in Unicast mode as I found Office 365 and another outside service didn't want to work using Multicast or IGMP Multicast.
The really bizarre thing is the secondary FS vm can ping the other boxes even with "ping server -S clusteraddress"
Any suggestions as to where to look to track this down will be most welcome.
Cheers
David
Cheers, David

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Different weblogic JNDI Connections sharing the same dbms session

Hi,
we have setup JDBC Datasource on the weblogic server. Creating connection using JNDI lookup is sharing the same session across different connections, which is causing invalid data generation in global temp tables. The data in the global temp table is accessed accross db sessions.
I have created a test case, using JDBC connection, the global temp table data is not accessible across session (this is correct behavior).
where as using JNDI connection the data from the temp table is accessed across different connections. (This is not expected behavior)
I tried setting statement cache = 0, Remove Infected Connections Enabled = true / false but no use.
is there any other setup in the weblogic to avoid db session sharing across connections??
Thank you,
Ranga

I am using a single thread, This can be easily reproducible on any machines.
@ Sequence to follow
@ public static void main(String[] args) {
@ for (int i =0; i < 3; i++)
@ try{
@ conn = getJNDIConnection();
@ printSessionDetials();
@ insertValuesToTempTable();
@ QueryRecordsFromTempTable();
@ }finally
@ conn.close();
@ Test Results:
@ JNDI connection found: jdbc/xdo120DBDS
@ V$Session Details....
@ SessionId:299:serial#:909:Seq#:31:dbmsSessionId:012B038D0001
@ Number of Records:1
@ connection is closed.....
@ =====================================
@ JNDI connection found: jdbc/xdo120DBDS
@ V$Session Details....
@ SessionId:299:serial#:909:Seq#:38:dbmsSessionId:012B038D0001
@ Number of Records:2
@ connection is closed.....
@ =====================================
@ JNDI connection found: jdbc/xdo120DBDS
@ V$Session Details....
@ SessionId:299:serial#:909:Seq#:45:dbmsSessionId:012B038D0001
@ Number of Records:3
@ connection is closed.....
@ Process exited with exit code 0.

2 Mac's sharing the same itunes library?

2 Mac’s sharing the same itunes library?
I would like to use the same existing itunes music folder I have on a external drive, connected to one of my machines?
I can share without any problem the drive from my laptop and can share/view the other machines itunes music through itunes on my laptop, but can not set the music folder on my laptops Itunes to be the same as on the machine that the external drive is connected to.
I have heard and seen this operation before but how do I do it ?

You lost me on which machine is which and where the library is stored. If the library is on an external drive connected to Computer 1 and you want to access it on Computer 2 then:
1. Connect to computer 1 using the Finder on Computer 2 and mount the external drive
2. Open iTunes on Computer 2
3. Select iTunes -> Preferences
4. Select the Advanced tab
5. Select Change next to iTunes Music Folder Location
6. Navigate to the folder where the music is stored.
7. Quit iTunes
8. Open iTunes with the OPTION key held down.
9. When prompted navigate to the Library file on Computer 1.
That should do it. As always, back up the Library file before you start this process. I would also recommend you back it up regularly as if you have a network issue while accessing the library file remotely, it could corrupt it.

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.   My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.   We only have one copy of iTunes and we have been sharing t

I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.
My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.
We only have one copy of iTunes and we have been sharing the account. (She doesn't really use the computer for anything beyond writing the odd weekend assignment.)
Would I be better off setting her up with her own and making her as a separate user on the computer? Would this require much work?
In recent times with updates, we have a few problems with the duplication of texts and that sort of thing. Both of our texts are stored on the computer and that sort of thing. Also, sometimes texts I send her are sent through to me from her, if that makes any sense.
Anyway, I don't really want to overly complicate matters when it comes to accounts etc, but I wanted to know if a fresh Apple ID would be the best thing or even a new user?
Any tips etc would be greatly appreciated
Thanks in advance
MacBook
I have this question too (0) Reply

Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac"   maybe thats why nobody answered you.
It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well.   I prefer to keep things simple, but...........you and yours, I dont know.......
http://support.apple.com/kb/PH11468

HT204150 Sharing the same iTunes, Apple ID and iCloud accounts.

Hi
My wife and I share the same Itunes , Apple Id and Icloud accounts.
How do we keep our contacts seperate, when we open up or back up on I cloud?
As we both have I phones, I would like to keep all my work contacts seperate from hers. Also I don't wish to have her contacts loaded on my phone and vice verser.
Will it mean the I will have to get a seperate apple ID and seperate Icloud account.
Problem is that all our music and photos are on the one Library, because we didn't have two Iphones before, it didn't matter.
We would like to keep the same Itunes library to access music and photos, but like to keep everything else seperate.
Can you please help.
Regards
shervhall

You can continue to share the same ID for purchasing from the iTunes and App stores (your iTunes account/library), but you need to have separate iCloud accounts with separate IDs to prevent merged data such as contacts. (You aren't required to use the same ID for purchasing as you do for other services such as iCloud, iMesage, FaceTime, etc.) The only issue is that photo stream is tied to the iCloud account so when you separate your accounts, you will no longer be sharing the same photo stream. You can still send each other shared photo streams in order to share each other's photos, but they wouldn't be part of the same photo stream.
To separate your iCloud accounts, on the device that will be changing accounts, go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on the device. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your device.) After everything is turned off, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The device that will be keeping the existing account will not be effected by this.) Next, set up a new iCloud account on this device using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account. At this point you will have two different iCloud accounts, one for each phone, with identical data on them.
You will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the unwanted data (such as deleting the other wife's contacts from your account, and vice versa). These changes will be reflected on each phone. When finished you will have individual iCloud accounts with just your own data on them.
To avoid getting each other's text messages and FaceTime calls you also need to use separate IDs for iMessage and FaceTime. To change the ID for iMessage on one of the devices, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign in with a separate ID (such as the new iCloud ID). To change the ID for FaceTime on this device, do the same thing in Settings>FaceTime.

HT204053 My wife and I shared the same AppleID but want to break these apart. We set up a new AppleID for her but can't get this changed on the phone. How do we switch her AppleID default on her iphone 4?

My wife and I shared the same AppleID but now want to break these apart into separate accounts. I have set up a new appleid for her and also set up on line. However, I can't figure out how to change this on her iphone4. I have looked at all of the General settings but need guidance. When I use the phone to try to purchase songs from itunes, it reverts to the old appleID.
Any suggestions?

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)

TS2755 Me and my wife r sharing the same Apple ID, with the conversion IOS7 all of a sudden my wife can read all my sended and received iMessages! What t.f is going on? I tried all kind of things, pls help

Gentlemen,
Me and my wife r sharing the same Apple ID, with the conversion to IOS7 all of the sended and received iMessages on my phone comes in also on my wife's phone! Tried all kind of things, pls help
Marco

Are you both using the same Apple ID?
What do you have here:
Settings > Phone > My Number > ?

ACE20 - Loadbalancing across 3 virtual servers sharing the same address

Similar Messages

Maybe you are looking for