Multiple Node Manager Instances and servers sharing the same domain home.

Hi,
We have a 8 man server weblogic cluster spread over 4 machines. Each machine runs 2 man servers each.
Each of the machine is configured to run node manager.
We use shared storage accessible to all 8 servers and all 8 man servers have the same domain_home.
Lets call it W:/domain
Now the problem we are facing is that node manager running on 1 machine is trying to access/control a managed server on a different machine after a machine restart.
eg.
ManServer1 Home : W:/domain/servers/server1 ====> runs on Machine 1
ManServer2Home : W:/domain/servers/server2 ====> runs on Machine 2
Problem is node manager on machine 1 is trying to restart man server 2. The path W:/domain/servers/server2 is accessible to Machine 1.
After a restart, what I assume is happening is that the nodemanager is checking all servers folder under Domain_Home/Servers and trying to restart servers instead of restarting only those which it should start. The config file has the server and machine assignment done correctly. Is there a way to make this configuration towork. Or do we need to create different domain_home's for different man servers like
Domain_Home for MS1: W:/domain/MS1 ( Server Home would be : W:/domain/MS1/servers/MS1)
Domain_Home for MS2: W:/domain/MS2 ( Server Home would be : W:/domain/MS2/servers/MS2)
Regards,
Atheek
Edited by: atheek1 on 03-May-2010 00:27

Thanks - We have tried putting 2 dad entries in file, but not sure how you connect. You only specify a port number, so how does it connect that to a db???

Similar Messages

  • Multiple APEX instances sharing the same Oracle Home?

    Can someone tell me if it is possible to have multiple APEX installations where the database instances are sharing the same Oracle Home? If so, how would this be set up?
    So, if I have development and test running on the same home, I want a separate APEX instance for each. We can do this when different Oracle homes are used (separate httpd running) but not for the same home.
    Thanks

    Thanks - We have tried putting 2 dad entries in file, but not sure how you connect. You only specify a port number, so how does it connect that to a db???

  • ACE20 - Loadbalancing across 3 virtual servers sharing the same address

    I have 3 virtual servers sharing the same IP, just using different ports.
    192.168.1.1:8000 = server1
    192.168.1.1:8001 = server2
    192.168.1.1:8002 = server3
    I would like to loadbalance across all 3 with the following probe, looking for the URL.
    http://192.168.1.1:8000/index.php
    http://192.168.1.1:8001/index.php
    http://192.168.1.1:8002/index.php
    The config I have in place doesn't seem to be working...  I probably configured this entirely wrong... not sure.
    I need to understand what I missed.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++
    probe http WEB1-http-probe
       interval 30
       passdetect interval 5
       request method get url /index.php
       expect status 200 200
       connection term forced
    probe http WEB2-http-probe
       interval 30
       passdetect interval 5
       request method get url /index.php
       expect status 200 200
       connection term forced
    probe http WEB3-http-probe
       interval 30
       passdetect interval 5
       request method get url /index.php
       expect status 200 200
       connection term forced
    ! RSERVER
    rserver host 192.168.1.1-rs
       ip address 192.168.1.1
       inservice
    ! SERVERFARM
    serverfarm host WEB-sf-HTTP
       rserver  192.168.1.1-rs 8000
          probe WEB1-http-probe
          inservice
       rserver  192.168.1.1-rs 8001
          probe WEB2-http-probe
          inservice
       rserver  192.168.1.1-rs 8002
          probe WEB3-http-probe
          inservice
    ! STICKYGROUP
    sticky ip-netmask 255.255.255.255 address source StickyGroup_WEB-HTTP
       timeout 60
       replicate sticky
       serverfarm WEB-sf-HTTP
    ! CLASS-MAP
    class-map match-any WEB-cm-HTTP
        2 match virtual-address 192.168.200.1 tcp eq 80
    ! POLICY-MAP
    policy-map type loadbalance first-match WEB-pm-HTTP
      class class-default
        serverfarm WEB-sf-HTTP
    policy-map multi-match POLICY
       class WEB-cm-HTTP
         loadbalance vip inservice
         loadbalance policy WEB-pm-HTTP
         loadbalance vip icmp-reply active
    When I check the status of the RSERVER, the probes all indicate "FAIL"

    Found my problem...
    I failed to put in the "port" statement under the probe.
    After doing this and then verifying the RSERVER status, all the probes now show as OPERATIONAL.
    probe http WEB1-http-probe
    port 8000

  • HT204053 My wife and I shared the same AppleID but want to break these apart. We set up a new AppleID for her but can't get this changed on the phone. How do we switch her AppleID default on her iphone 4?

    My wife and I shared the same AppleID but now want to break these apart into separate accounts. I have set up a new appleid for her and also set up on line. However, I can't figure out how to change this on her iphone4. I have looked at all of the General settings but need guidance. When I use the phone to try to purchase songs from itunes, it reverts to the old appleID. 
    Any suggestions?

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)

  • MY HUSBAND AND I SHARED THE SAME EMAIL ADDRESS, AT THAT TIME I PURCHASED MUSIC, NOW I HAVE MY  OWN EMAIL. I ADDED MYSELF TO THE ORIGINAL EMAIL, ON THE ORIGINAL ITUNES ACCOUNT. HOW CAN I GET MY MUSIC ON MY I PHONE. MY HUSBAND HAS ALL MY MUSIC ON HIS PHONE.

    MY HUSBAND AND I SHARED THE SAME EMAIL ADDRESS, AT THAT TIME I HAD DOWNLOADED MUSIC TO MY PHONE. I GOT MY OWN EMAIL ADDRESS AND ADDED THAT EMAIL TO THE ORIGINAL ACCOUNT, WHICH ORIGINATED WITH MY HUSBANDS EMAIL.
    HOW CAN I GET THE MUSIC DOWNLOADED TO MY IPHONE.

    nshepley wrote:
    I GOT MY OWN EMAIL ADDRESS AND ADDED THAT EMAIL TO THE ORIGINAL ACCOUNT, WHICH ORIGINATED WITH MY HUSBANDS EMAIL.
    Please turn off your CAPS LOCK!
    How did you "add that email to the original account"?
    You changed the AppleID to your new email address?

  • My husband and I shared the same apple id I accidentally deleted his number from the iCloud And now his phone won't receive phone calls or text what do I do

    My husband and I shared the same apple id I accidentally deleted his number from the iCloud And now his phone won't receive phone calls or text what do I do

    In preferences turn on iTunes sharing in iTunes preferences and keep iTunes turned on in both accounts. Or better yet put the iTunes library on the main HD rather than in an account and set the location of the library to that location in iTunes preferences.

  • Aperture and iPhoto - sharing the same library? Synchornizing libraries?

    Hi,
    I would like to ask if it is possible to either:
    1. Have Aperture and iPhoto share the same library.
    2. Have the edits on one reflect in the library of the other (if it isn't possible to simply "share" the same one).
    Thanks.
    My major concerns that keep me from going to Aperture and forgetting iPhoto altogether are:
    a. iPhoto has nice sharing capabilities (with Facebook, email, etc.) which I am not sure Aperture will have.
    b. iPhoto has good iLife integration (slideshows with iTunes music, send to iMovie, etc.)
    c. my photos have tags in iPhoto that I'm not sure would transfer to Aperture if I did the "import" process...

    1. Have Aperture and iPhoto share the same library.
    No. Th Aperture Library is a much more complex beast than the iPhoto one. The two apps can shar the same photos though.
    2. Have the edits on one reflect in the library of the other (if it isn't possible to simply "share" the same one).
    No. Neither is an "external editor" like Elements. Importing is a once-off thing. Once you import a pic to Aperture it never references the iPhoto version again - and vice versa.
    It's tempting to think of Aperture as some kind of "iPhoto Pro". It's not. It's an entirely different application. When you edit a pic in iPhoto the apps preserves your original file and creates an entirely new file - the modified version. When you edit a pic in Aperture that doesn't happen. Your edits are recorded in the database and +applied live+ when you view the pic in the Aperture window. This is a very different way of working and the principle reason why the two apps don't - and can't - read each other's Library.
    a. iPhoto has nice sharing capabilities (with Facebook, email, etc.) which I am not sure Aperture will have.
    You can email from Aperture in exactly the same way as iPhoto. There is a Facebook exporter for Aperture (though, given what Facebook does to photos, I can't imagine why anyone would want one) and there are lots of other exporters available as well. Search on MacUpdate.
    b. iPhoto has good iLife integration (slideshows with iTunes music, send to iMovie, etc.)
    Aperture can do the same - and in the same way - if you set it to share Previews with iLife and iWork in the Preferences
    c. my photos have tags in iPhoto that I'm not sure would transfer to Aperture if I did the "import" process...
    They will.
    There are some differences: No Face and Places features in Aperture, Aperture won't deal with video at all, you cannot order postcards and calendars via Aperture and Slideshows are better on iPhoto. But if you share the Previews with iLife, then you can access any of these features you want via iPhoto.
    The best thing to do is download the Aperture trial and experiment with it.
    Regards
    TD

  • Two CAS Servers on the same domain but different AD Sites

    I have a customer that has 1 EXCH MB server & 1 EXCH server running the Hub Transport and Client Access roles. These two servers are in the same domain and reside in AD site A. Now he wants AD Site B (also in the same domain) to have 1 EXCH MB server
    & 1 EXCH server running the HUB/CAS role. The problem is the CAS role in site A is the only one that is public interfacing. The CAS server in site B has not certificates at all, and I want all the mail to re-route to the CAS server in Site A. Does anyone
    know how I can do that???

    The CAS in the internet facing site will proxy to the CAS in the non-internet facing site. And you do have a cert on that CAS in Site B. The default built-in one. However, if you have clients in Site B, you should replace that built-in cert with one that
    is trusted by clients such as Outlook and Lync etc...It doesnt have to be a 3rd party cert, it could be on that is trusted internally.
    http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
    Understanding Proxying and Redirection
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Extending Outlook 2013 to multiple instances and profiles under the same user

    Hello,
    I understand that Outlook 2013 will only run one profile under a logged in user account. can i use Outlook Primary Interop Assembly
    to add that ability to outlook 2013 ?
    Regards

    Hello,
    Only one instance of Outlook can be run. You can choose the profile programmatically using the
    Logon method of the Namespace class. Here is what MSDN states:
    Use the Logon method only to log on to a specific profile when Outlook is not already running. This is because only one Outlook process can run at a time,
    and that Outlook process uses only one profile and supports only one MAPI session. When users start Outlook a second time, that instance of Outlook runs within the same Outlook process, does not create a new process, and uses the same profile.
    If Outlook is already running, using this method does not create a new Outlook session or change the current profile to a different one.
    You may find the
    How to automate Outlook from another program article helpful.

  • OC4Js on different servers sharing the same application

    Does anyone have some suggestions to how I can get non-clustered mid-tier OC4Js to share the same application stored on a shared NFS mount?
    Right now, what I've done is created the OCJ4_Dev1 on mid1 and OC4J_Dev2 on mid2, then changed their server properties for application and application deployments to point to the shared NFS, but different directories.
    Is there some way they can use the same directory? I can think of a number of ways of doing this with links etc, but maybe has some better ideas? Basically, I want the same "source" for two different OC4Js, but without confusing the instance configurations.

    I think there are many options around this, but a simple way I managed it was to have 2 windows accounts,and each with a different iTunes library. I think you can now share multiple libraries on the one account, I'm sure there's an answer in the support pages here.

  • Managing DB and AS with the same management tools ???

    Hi,
    I have Oracle 9i DB now running on Red Hat ES 3.
    I plan to install on the same machine 10g AS R2.
    My question is simple :
    Does 10g AS include all the management tools to control both DB and AS ?
    Or do i need to install 9i DB Management and Integration + AS Management tools ?
    Thank you :)
    G.Jachimiak

    Well, it seems that a 10g Database and Oracle Enterprise Manager 10g Database Control are installed with OracleAS Metadata Repository.
    So i don't need to install any 9i management tool, am i right ?
    See : http://download-uk.oracle.com/docs/cd/B14099_11/core.1012/b13995/tools.htm#i1019484
    2.1.1.3 Using Database Control to Manage an OracleAS Metadata Repository Database
    Oracle Enterprise Manager 10g Database Control is installed and configured when you install the OracleAS Metadata Repository. As a result, you can use Database Control Console to manage the OracleAS Metadata Repository database.
    The Database Control Console is similar to the Application Server Control Console, but it is designed to help you manage your Oracle database. It provides a Web-based user interface for performing database management tasks. For example, you can monitor the performance of the database, schedule backups, and manage the tablespaces of the database.
    See Also:
    Section 2.5, "Managing the OracleAS Metadata Repository Database with Database Control"
    If you use OracleAS Metadata Repository Creation Assistant to install the OracleAS Metadata Repository in an existing database, Database Control will also be available if the existing database is an Oracle Database 10g database and if the Database Control was configured when the database was created.
    Note that if you use Grid Control to manage your OracleAS Metadata Repository database, there is no need to use Database Control. All the features of Database Control are available from the database management pages within the Grid Control Console.
    See Also:
    Section 2.6, "About Oracle Enterprise Manager 10g Grid Control"

  • Installing second Exchange server 2010 with all roles (CAS, HT and MB) in the same domain?!

    Dear all,
    first of all thanks for reading this topic :-)
    In our enviroment, we have a Exchange 2010 server (Version: 14.01.0438.000), whitch is installed with all server roles (CAS, HT and MB) on one server(OS is Windows Server 2008 R2 Enterprise). This exchange server sends all external mails to a smarthost (Redddox).
    We are using Outlook Anywhere, Active Sync and OWA.
    Now, we need to migrate this Exchange server to another one, because we think, that the server´s OS is corrupt and also, there are wrong licenses installed. The "new" server will have the same OS Version and Exchange Version (2010).
    Currently I´m a little afraid, to install a new one - because I think when I will install the CAS and HT role, something will happen in my productive enviroment (Autodiscover, SMTP Connectors, Cerficates a.s.o.).
    To install the mailbox role, I think this will not affect anything.
    Can you help me a little bit in what to take care of? Do I need to preconfigure something, before I will install the second exchange? What about the version / service pack of Exchange to install? Must it be the same as installed on the first one?
    Any help would be appreciated!
    Jennie

    Hi Jennie,
    Below are the steps if you are not planning to upgrade.
    1) Install new Exchange2010-SP3 Server all roles Please check
    this
    2) Install the certificate in the new server by requesting a duplicate from the 3rdparty CA. Or export from the existing Exchange 2010 and import to the new one. Please check
    this
    3) Set your autodoscover, OAB, ECP, OWA URLs same as the current Exchange. Below artciles will help you to do that.
    For OAB, Autodiscover, EWS please check steps 5,6,7in this
    For setting OWA and ECP URLs please check
    this.
    4) Move few mailboxes as a test and check. If no errors move the rest.
    5) Move your OAB generation server to the new server. Please check
    this
    6) Move you public folder contents to the new server you have. Please check
    this
    7) Configure your firerwall to receive emails on the new server and other services like EWS, OWA, ActiveSync.
    8)
    Add the new server as the source server and in the current send connector and remove the old server from the send connector.
    Shutdown the server for a couple of days and monitor. So you will know if you missed something.
    Uninstall Exchange2010 from the add remove programs.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Manually manage music and syncing at the same time.

    As my music is growing larger, but my iPhone's memory isn't. I change to manually manage musics on the phone. When I change details of the song e.g. adding album artist or lyrics. iTunes doesn't sync it for me. Do I have to manually do this by myself like adding and deleting the old ones every time I make a change.
    Another question is that, when I make a change to my playlist or making a new playlist on my laptop, there's nothing happening on my iPhone. Is there a way to make it automatically does that on my phone as well? Or do I have only one choice which is to go back to sync the library?

    Golf129 wrote:
    As my music is growing larger, but my iPhone's memory isn't. I change to manually manage musics on the phone. When I change details of the song e.g. adding album artist or lyrics. iTunes doesn't sync it for me. Do I have to manually do this by myself like adding and deleting the old ones every time I make a change.
    Just make the changes then add the song to the iPhone.
    You don't need to first delete it from the iPhone.
    FYI: You can autosync.
    Create a playlist then sync only that playlist.
    Add/delete from that playlist to change what is on the iPhone.
    Any changes will get sync'd automatically.

  • Install Discoverer AND Portal in the same Middletier Instance

    Hallo,
    when installing AS 10.1.2 i have several install options.
    When choosing BI / Discoverer i have no Portal in the middletier after the installation finished.
    I could install another middletier instance with using the portal option but i want to have Portal installed as component in the existing middletier.
    How can i achive this ? (install a single componant into an existing middletier)
    Thanks,
    Jochen

    You cannot do that. You have to do a fresh install of 10.1.2.0.2 and choose Business Intelligence and Forms install type. This install type provides you the ability to install both Discoverer and Portal in the same Oracle Home. Seems like you installed Discoverer from BI CD, which gives you the ability to just install Discoverer. Instead use the EE download or Oracle Application Server main CDs from the CD pack.
    Regards
    Pavna

  • Is it possible to have two SCCM instances for the same domain

    Hello - I'm the IT Project Manager for an organization that has a single domain-production.
    In here, we have an instance of SCCM 2012 setup. This instance is used to build packages, images, testing, validations, modifications etc. as well as for production roll outs. The primary issues we have with this is there is no separation between test and
    prod, also, there are several packages, task sequences etc causing confusion in determining which is a test package and which is prod.
    Setting up a test domain does not seem to be a viable option for us, at least for now.
    So, my question is, can we have another instance of SCCM in the same domain that we can restrict only for the sake of testing & validations and then use the original one to deploy the tested (gold) packets.
    Just a thought!! Does it make sense? Any challenges that we could face?
    Thanks in advance 
    Jagan Pantina
    JP

    Hi,
    Yes you can no problem, you should avoid having Boundary / Boundary Groups used for Site Assignment that overlap and make sure that PXE request to the test/dev environment is restricted to one test subnet to avoid co-existance issues.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

Maybe you are looking for