ADFS server in NLB cluster unable to reach all servers in the same subnet
I have 2 ADFS (3.0) virtual servers (server 2012 R2 on VMware) in an NLB cluster (setup for Office 365 initially) and want to be able to use the SAML to connect to a couple of Linux servers in the same network to allow SSO to the Linux boxes.
It was working then stopped and now the primary FS server (FS1) cannot ping either Linux box or one of our WS08R2 file and print servers. It can ping all other servers in the same network.
I tried to get a packet capture with MS NetMon 3.4 but it only picked up the successful ping requests.
Firewall is disabled but that made no difference.
NLB cluster configured in Unicast mode as I found Office 365 and another outside service didn't want to work using Multicast or IGMP Multicast.
The really bizarre thing is the secondary FS vm can ping the other boxes even with "ping server -S clusteraddress"
Any suggestions as to where to look to track this down will be most welcome.
Cheers
David
Cheers, David
Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Server 2012 Failover cluster. Make two VMs stay on the same node
We have a unique situation where i need two machines to stay on the same node. Its a 4 node cluster with 30+ resources but i want to make sure two boxes are ALWAYS on the same now. If one migrates to another node the second needs to follow. Is there
a way to do this?How an this KB help to stay the two vm's on the same node.
With all do respect @justinv how could this helped you to your problem , your question was "We have a unique situation where i need two machines to stay on the same node. Its a 4 node cluster with 30+ resources but i want to make sure two boxes are ALWAYS
on the same now"
and the KB that elden showed you is for : "Failover clusters that are running inside of virtual machines (sometimes referred to as “guest clusters”) may have problems with nodes joining the cluster."
@justinv cloud you tell us more about this did I misunderstand your question ?
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you
I explained in one of my replies that my underlying issue was this exactly what the KB fixed..... A guest cluster failing when moved to different nodes. Thats the only reason why i wanted them on the same node to begin with. While this post didn't solve me
original question is solved what my real problem was.... -
How reach all threads of the same servlet ??
hi !
I would like to have the possibility to interrupt all threads that are implementing the same servlet (each client has one thread) so that they all recalculate something :
I've tried with a synchronized in a POST method : it works but with only one thread of the servlet, all other threads that implement the same servlet are continuing their work : has someone an idea how to do that, to go into the code of ALL running threads ??
it would be vey good please...just put the code INSIDE the servlet and it'll reach all clients. of course, u have to determine the condition for that block of code to execute.
-
Unable to reach Adobe servers, Please check firewall settings and try again
I have been a creative cloud customer since it started and I've never experienced such buggy software as the app manager. The customer experience is just shocking and I wish Adobe would just offer direct downloads for the software we need rather than use the app manager.
I'm currently trying to install the latest versions of the programs but the app manager keeps showing "Unable to reach Adobe servers, Please check firewall settings and try again in a few minutes".
I do not have any firewalls on my network.
I've uninstalled all previous versions of the applications.
The app manager will download a few % and then the message appears again. I click retry and it downloads another few % before showing the message again. I keep doing this until the program is fully downloaded and installed which take hours. Because I am able to eventually download the app, the error should be anything to do with my setup or internet connection as I've never had this issue before when installing adobe products.
Is there a way we can bypass the app manager and install the programs directly? This is getting very annoying and I just need my apps to install without wasting days clicking the retry button.I'm having the exact same problem. Photoshop is stuck at 0%.
Have the links for direct download changed? When I went to http://prodesigntools.com/adobe-cc-direct-download-links.htmland then scrolled down the page to:
Photoshop CC 2014 (64-bit)
740 MB
File 2
801 MB
File 1
and then clicked on File 1 and File 2, I reached a page that says "You don't have permission to access "http://trials3.adobe.com/AdobeProducts/PHSP/15/win64/Photoshop_15_LS20_win64.7z?" on this server." -
Unable to reach adobe servers, past 3 days Feb 20, 2015
for the past 3 days I've been getting a message when I trey to use the Adobe Application Manager after purchasing Adobe Creative Cloud service. I've tried two different computers, a Mac and a PC. Im also unable to get to the adobeid.services.adobe.com to reset my password (server not found), I have rebooted, shut down, shut down my firewall, check my hosts table for redirects. I can get to adobe.com because I'm posting here right now.
I contacted Adobe and chatted with an associate who was unhelpful, but I was told my request would be "Elevated to the relevant team", who have not made any attempt to contact me at this time.Please refer to:
Unable to reach Adobe servers, Please check firewall settings and try again
In Creative Cloud Application "unable to reach adobe servers please check your firewall settings"
Unable to reach Adobe servers when opening Creative Cloud
They have host of information.
Regards
Rajshree -
Creative Cloud is telling me "Unable to reach Adobe servers. Please check your firewall settings, and try again in a few minutes.
What do I do to access the cloud? I have checked my firewall settings to allow for me to be able to use adobe cloud. Any Suggestions?Try a different browser and/or turn your firewall off to download
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
My adobe cloud desktop app seems to have stopped working. I keep getting a error message saying Unable to reach adobe servers, please check firewall settings.
The creative cloud icon on the top menu bar is greyed out, and not updates show.
I have spoke to our internal IT and my settings are the same as my colleagues who's is working fine, can anybody help with this ongoing problem?Grafix121 please ask your I.T. department to review the Adobe Creative Cloud Security FAQ for IT section of Creative Suite Enterprise Deployment | Adobe Developer Connection for information on how to configure your network to allow connections to the Adobe servers.
-
A fix for Mac users encountering "unable to reach Adobe servers" error
Seemingly out of nowhere - i.e., not coinciding with any Mac OS, or app updates - I started getting the "unable to reach Adobe servers" error from the Creative Cloud desktop app. Signing into the Adobe website was impossible, too. When I say impossible, I mean it literally - the login window would not display, in Safari or Chrome.
I'm sure this is posted somewhere here, but just in case, here's the solution that worked for me (posted by phatfish81 on Feb 7, 2015 4:35 PM):
https://discussions.apple.com/message/27683395?tstart=0Luciac15720559 have you utilized the steps listed in Sign in, activation, or connection errors | CS5.5 and later to locate the cause of the connection error? If so do you have any questions regarding the steps listed within the document? What type of network environment is your computer located?
-
'Download Error' due to 'Unable to reach Adobe servers'.
I am getting a 'Download Error' due to 'Unable to reach Adobe servers'. I have already reconnected and disconnected my internet, and nothing has changed. How can I fix this problem? If anyone can help, I would truly be grateful. Thanks!
- Bobby BobfaceNot really a Premiere Pro problem, so moving this to the Downloading, Installing, Setting Up forum.
Re: Receiving error stating not able to access the Internet in Adobe Download Assistant -
Adobe Download Manager unable to reach Adobe servers
I am getting the "Unable to reach Adobe servers" error all the time.
I've tried
deleting the opm.db file;
deleting the PDApp log file; and
entering my adobe login details.
turning off my avast firewall (there's none on my modem)
But the error doesn't go away and I can't upgrade to LR 5, etc.
Has anyone managed to fix this error?
Thanks,
Ganga.
PS:
a) I am not happy that I have to use the forums to get support on a product that I'm payingf for.
b) Why can't Adobe offer 24/7 support? I am in Australia and should not be made to wait for US business hours.
c) I wonder if Adobe will reimburse for the days they couldn't supply the product I've subscribed to.Yes Jihoon1109 the managed network is likely causing your network difficulties. This is especially true once the steps listed in http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html have been completed.
I would recommend contacting your I.T. department and having them review the Adobe Creative Cloud Service Access Documentation for IT section of http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html. -
N95 8GB - "Unable to save. Profiles in the same re...
Hi all!
I have a N95 8GB RM-320 V 30.0.018
When I try to config another account SIP in the same realm, but with another user name, the system show me this message error above:
"Unable to save. Profiles in the same realm must have same user name"
I can't config two different accounts that the same provider on this mobile phone? Why? What's the logical explanation?
Thx for now!Hello,
@ ontherun : I don't know. I have never take/test incoming voip calls, and for instance, because my phone is not always connected, people join me on my mobile number
@ mrmrmrmr : As I said more than one year ago (see my
06-Mar-2008 06:12 PM
answer), I have a trick to use 2 differents sip profiles using same realm (provided by the same operator : same proxy, registar server and realm but differents usernames) : my trick is to put my SIP phone number (corresponding to the username) in place on the realm. Don't ask me why (?????), but it works.
Jean-Martial. -
I found that T3Client connection to cluster from appserver ends up always
in the same appserver!!!!
Why??? I fail to understand why it wouldn't follow the standard round-robin
procedure???
-- Angsuman
I guess the RMI object you connect to is using "sticky to first server".
This is default. For your own RMI object, there is a way to turn the
"sticky" off, refer to cluster and RMI object documents for details.
For EJB objects, refer to "Urgent: Please help!" message for details.
Cheers - Wei
Angsuman <[email protected]> wrote in message
news:39adbac8$[email protected]..
> I found that T3Client connection to cluster from appserver ends up
always
> in the same appserver!!!!
> Why??? I fail to understand why it wouldn't follow the standard
round-robin
> procedure???
>
> -- Angsuman
>
>
-
Hi All,
I have two domains, prod.local and test.local. On prod.local, I have a license server living on the connection broker. I have created a two way trust between the domains so that the RDS instance on test.local can use the license server on prod.local.
When I first setup the RDS instance on test.local and point it to use the license server on prod.local everything appears to work, all servers recognize the license server.
However when I log off and back on, and click the RDS dashboard in test.local, the Remote Desktop Services overview states I need to add every server from prod.local to the server pool. This is bothersome because the Remote Desktop Services on test.local
is still functioning, but I am no longer able to manage it. When I add the servers from prod.local to the server pool I am displayed the setup for prod.local instead of test.local
Is there a way around this? Can I use the same RDS license server key multiple times?
tldr: Using a different domain's license server causes my RDS instance in Server Manager to display the wrong RDS farm.Hi Nathan,
Thank you for posting in Windows Server forum.
Please check the required ports must be opened on firewall.
- To issue RDS Per User CALs to users in other domains, there must be a two-way trust between the domains, and the license server must be a member of the Terminal Server License Servers group in those domains.
- To restrict the issuance of RDS CALs, you can add RDS Host Servers into Terminal Server Computers group on RDS Licensing servers.
- Configure RDS licensing server on all RDS Host Servers in each domain/forest. You can do it through RDS host configuration snap-in or through a group policy.
- Add administrators group of each domain/forest in the local administrators of RDS licensing server. This way, you’ll not get a prompt to enter your credentials when you’ll open RDS host configuration snap-ins in trusted domains/forests.
More information:
Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
http://support.microsoft.com/kb/2473823
Hope it helps!
Thanks.
Dharmesh Solanki -
My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fe network. I have reset the network settings and still Safari will not open any web pages. Help!
Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding". I am not able to connect with anything on the Internet. Frustrating since I am able to connect with my laptop. Thanks for the suggestion.
-
Restore BizTalk Servers on the same SQL Server
Hi
If I need to do a recovery of the BizTalk databases to a point in time before a hardware failure on the same SQL Server, how do I achive this?I have seen the only recommended method is to use log shipping, but is this to restore Databases onto another SQL
Server? If I just want to restore all Databases onto the same server, how would I achive this.
Thanks in advanceThe only supported Backup/Restore scenario for BizTalk Server, is using the SQL Agent job:
Backup BizTalk Server (BizTalkMgmtDb)
If you had this job running before the hardware failure, it will have backed up your databases both Full and Log (Differential).
Use these backup files for restore, just as you normally would when restoring SQL Server databases.
Morten la Cour
Maybe you are looking for
-
I recently downloaded a new update of the operating system on my 3GS It seems to be a bit slower since and I have no idea if that is part of what is going wrong. I cannot get itunes to recognise my phone. Windows pops up a 'window' that says my 'm
-
Account assignment for movement type 221
Hi, Instead of using account suggested by GBB-VBR for movement type 221 we want to use account entered by user in transaction as an offset to inventory account. However SAP keeps on hitting account determined automatically (from GBB-VBR) and ignores
-
Need to add new Text Field on the Screen
Hi, I am using Oracle 9 Designer and generating the web pages using web pl/sql language. After I generate the page, my screen looks like this: Employee id: TextField Employee Name: TextField I want to add a comment"(Please enter characters Only" belo
-
Re: Related to CJ20N Urgent Issue
Hi Guys, This is an Urgent Issue!!!! I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction. Now
-
Problems with the Losing Release Strategies Approvals in PO.
Hi Experts, We're using the BBP_WFL_APPROV_BADI for Purchase Orders (WS14000145) the source code of BADI works fine. I can define all the approvers as source code. I'm making any text modification in the PO with status Awaiting Approval. This works