Acknowledgment in Menu

Hi everyone,
What techniques do you use in a menu to acknowledge a user's input? I have a menu that allows a user to select subtitles. It would be great if there were some feedback to show that what the user selected occured. I created a second menu (a duplicate of the first) which has the words, "Subtitles On" -- that menu is invoked after the user selects subtitles on.
Is there a better way to do this? I'm thinking of preserving disk space.
Thanks!!!

No matter what goes into creating the effect, I think it'll still be two images on the final disc, so try not to worry too much!

Similar Messages

"Please Acknowledge" message from menu

Dear All
Can u tell me anyone how to suppress the message "Please Acknowledge" from a form, when calling a report?
for ur knid information my report run successfully using menu item.
Arif

hi
try something like this.
create on-message trigger.
begin
if
abs ( message_code ) = 40400
then
clear_message;
bell;
message ( message_text, no_acknowledge );
else
message ( message_text );
end if;
end;please check out the following link.
Link
sarah

How to prevent PO changes in ME22N after Order acknowledgement?

Hi everyone,
        Can anyone tell me how to prevent PO changes (ANY) in ME22N after Order acknowledgement?
        I would like to make it possible without release strategy process or authorizations.
        Do you know some User Exit or Customazing way?
Regards.
Jaime S.

Dear Jaime S,
You can do this by restricting in authorization SHDO and also by marking "changes not possible after release" in Release strategy procedure.
And also you can navigate the menu to, SPRO------>IMG------>Material Management--->Purchasing(OLME)------->Purchase Order---->Define screen Layouts at Document Level---->And go to ME22n And Select the right parameter and in this you can make it display, optional or required entry for the fields.
Regards,
Manjunath B L

Spry menu bar error in IE 9

Hi everyone,
I added a Spry Menu Bar (menubar1) to my site layout using Dreamweaver CS3. When I clicked 'Live mode' everything looked fine but when I previewed it in a browser and since then I have recently uploaded it to test it out I get white blocks to the right of the nav bar in Internet Explorer 9 (only). When I previewed it in a browser (prior to uploading it) a dialog box would pop up asking to allow blocked content at the bottom. When I clicked "allow" white blocky rectangles showed up to the right of the tabs. I have no idea what it is or why it's showing up. It only seems to be doing this in IE 9 (as I checked it in Firefox & Chrome with no problems to report) when I acknowledge the blocked content by clicking 'allow'. If I ignore the message and click the x the white blocks don't show up. But now that I have it uploaded the blocked content box doesn't show up but I still get the white boxes to the right of the navigation bar. And it's only happening in Internet Explorer (I have version 9 for Windows Vista). I'm attaching a URL to all my files including the html, javascript, CSS, etc.. Note: the files you want to take a look at to see what I'm talking about are: indextest.html and abouttest.html.
If you have any questions or need any additional files let me know. Thanks for the help!
Here's the link to veiw the files: http://www.test.ashleysperrydesigns.com/

Thanks altruistic gramps for the help. Changing the color of the blocks fixed it however there is a slight overlap between the box and the green border. If you go to: http://www.test.ashleysperrydesigns.com/indextest.html you will see what I mean. I know there has to be an easy fix but I don't know how to do it. Do you mind taking a look?
Thanks,
ashmic

Auto-Capitalization: How can I set Pages v5.01 to auto-capitalize the first letter of the first word in a sentence and to automatically change lower case "i" to "I" appropriately. I'm unable to find a menu that offers me these.

Auto-Capitalization: How can I set Pages v5.01 to auto-capitalize the first letter of the first word in a sentence and to automatically change lower case "i" to "I" appropriately. I'm unable to find a menu that offers me these.

Gavin Lawrie wrote:
Once it had been established that the iWork rewrite had resulted in some features being lost and others broken, and once Apple had acknowledged the concerns* and suggested they are working on fixes**, I'm not sure what else there is to achieve.
You are writing that in the perspective of having read about it here already. Repeated often enough that you encountered it somewhere in the posts.
Users are flooding in here and don't know any of this. Of course we have to repeat everything endlessly.
Because I like to give precise, understandable and workable answers to repeated questions, and Apple doesn't allow sticky posts here, I created a separate forum which users can consult to look up real answers, and contribute for themselves if they have something valuable to add:
http://www.freeforum101.com/iworktipsntrick/
There is a section purely devoted to Pages 5. Add whatever answers you feel will lighten the problems of Apple's 'upgrades'.
Peter
* Where have they acknowledged anything?
** They have barely anything listed, compared to the massive list of deleted features, and nothing but an extraordinarily long time frame considering they created the problems here and now. Apple has not said they will do anything at all about fixing the real issues, the biggest of which is that the new iWork apps break virtually all the work of existing users.

CRM 6.0 ERMS auto acknowledge rules for exception not working

I have set up a number of exceptions in our Send Auto Acknowledgement rule but the exceptions are never caught.
An auto acknowledge email is sent in response to emails containing the text defined in the rule for Subject or Sender
I have been unable to find anything regarding what text or format is acceptable - are spaces allowed. Even my test for English failed and I received a auto acknowledgment to my Japanese email....
Any ideas?
If
E-Mail Subject Does Not Contain "undeliverable" or
E-Mail Subject Does Not Contain "E-mail past processing deadline" or
E-Mail Subject Does Not Contain "Out of Office" or
E-Mail Subject Does Not Contain "Delivery Status Notification" or
E-Mail Sender Does Not Contain "postmaster" or
E-Mail Sender Does Not Contain "mailer-daemon" or
E-Mail Sender Does Not Contain "microsoftexchange" or
E-Mail Sender Does Not Contain "ironport" or
E-Mail Sender Does Not Contain "311" or
E-Mail Language Is Not Equal To English or
E-Mail Subject Does Not Contain "Delivery failure notification" or
Then
Send Auto Acknowledgement ( Mail Form = 311 Auto Reply; Outgoing E-Mail Address = "defined email address had to be removed"; Create Interaction Record = No; Create Service Order = No )

Donna,
I really think the issue is the "or" operator should be "and". When using DOES NOT CONTAIN you need "and" for all condition checks.
There is a select "All/Match Any" on the Conditions Menu that is used to toggle the Match "and" or "or".
Hope this solves your problem.
Donna O'Neill

Downloaded Itunes8 and now it won't even acknowledge my ipod

Hi,
I downloaded Itunes8 and now it won't even acknowledge my ipod. The computer just makes a bum bum noise (kinda like Law and Order) and my ipod shows up nowhere. How do I handle this?

Try Resetting your iPod while it's connected to the computer. Hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear: How to reset an iPod

Didn't receive an acknowledgement of message

Hi,
I am getting an issue in flex with respect to
de-serialization of java objects to as3. I am already having as3
objects being referenced in main SWF but once I am fething the data
from the middleware using remote object, I get the following error:
[FaultEvent fault=[RPC Fault faultString="Didn't receive an
acknowledgement of message" faultCode="Server.Acknowledge.Failed"
faultDetail="Was expecting message
'BCA1FC29-2D05-4A71-B10D-F89B4C32C36E' but received
'8A4E55B2-5D5A-495D-BB61-65F5D61F68D6'."]
messageId="7779E8EE-CF8C-2F14-9501-F89B533787BF" type="fault"
bubbles=false
cancelable=true eventPhase=2]
At server and client side I am using granite as a wrapper
over AMF which does the serialization and de-serialization.
Please advise.
Thanks,
Pankaj

In your flex builder, go to menu "project > clean..."
Your project need to be recompiled after you update the LCDS
config files. Cleaning the project forces a recompile.

Functional acknowledgement posting to PO confirmation tab

Hi Gurus,
Can anbybody please throw some light on the followin scenario.
is it possible to have the functional acknowledgement posted to the confirmation tab of the PO. If so what kind of confirmation control key has to be used and other settings that will make it such that i can see the functional acknowldegement show up on the PO confimations tab.
Thee way we envision to do this is,
1) we send the PO to the vendor
2) vendor sends us back 997 - now this message should some how get posted to PO confriamtion and not just stop at we05 tcode level.
3) next is our order confirmation - which is the 855 frpom the vendor (ORDRSP)
4) then next we will have ASN or 856 etc etc.
steps number 3 and 4 we do not have any problem. we are fine.
we want to have step 2 done .
so at the end of the day when i look at he po confirmations tab, i should see three confirmation control keys.
first one for 997, second one for 855 and third one for 856. please help
Thanks
Anusha

OK. thanks for the reply. here is where we need to go more in detail. This is how i cuurently have assigned.
in external confirmation category node of the menu path in config, i have
AB -order acknowledgement
LA - Inbound delivery.
now in the internal confirmation category node of the menu path, i have assigned
order acknowledgement - AB - order acknowledgement
Shipping notification - LA - inbound delivery.
now in the node of setup confirmation control i have specified AB as the first sequence and LA as the second sequence.
Now the question is if i want to receive 997 updated on the confirmation tab of the PO, shouldn't i define another key like AB, which is for 997 and then place it first in the sequence of confirmation category. Now what should be the key that i should define or create in external confirmation categories node of the menu path such that it will act like 997.
The business wants 997 updated onthe PO becuase they do not want to rely on the van provider to dtermine that the document was trasnimitted and received succseffully by the vneodr
Thanks
ANusha

Sales order acknowledgement

Hi,
I want to know the functionality of sales order acknowledgement report. I want to know how it works, what information is captured and how this information is transmitted from Oracle to the customer. My client wants to implement this sales order and shipment acknowledgement in oracle.
Shivom Malhotra

Hi Praveen,
u have to make the output to be EDI.
path
go to tcode va01,then in the second screen in the menu select EXTRAS->OUTPUT->HEADER->EDIT.
u need to have output types,partner and the medium select
EDI.After that press on save button.Then check the processing log.U will get the idoc number.
Besure all u should have output types,partner.
Regards,
Nagaraj

TS2662 why is my magic mouse suddenly doing things i don't want it to do? zooming in and out without even touching it? stopped scrolling & swiping and when clicking brings up a sub menu?

hi hope somebody can help me before i launch this thing at the wall!!! i have had no problems with my imac before but all of a sudden my mouse has taken on a life of its own.
its zooming in and out side to side all over the place when i'm not even touching it. yet when i want it to zoom in and out now it dosnt even acknowledge my tapping and swiping. (its actually zooming in and out as i'm writing this!!!!!
when i click on anything instead of doing what i want it do do it brings up a sub menu?
i have a feeling when my baby smacked the keyboard, it may have something to do with it but i have since gone into the mouse settings and made sure all the boxes are ticked etc.. has he broken my mac? :/

Original comment deleted by author.
Please do not repeat problems over multiple threads.

Outbound proxy acknowledgment user

hello,
we have the following scenario
async. outbound proxy -> file adapter
this works correctly but the acknowledgment that we would like to receive uses an unexisting user
and returns following error "HTTP 401 - Unauthorized"
anybody knows were to adjust this user ?
we could create the user but we would like to know where to find it
thanks
regards,
michel

HTTP logs have to be activated at instance profile level, ie :
icm/HTTP/logging_0 PREFIX=/,LOGFILE=devs_http.trc,MAXSIZEKB=50000, SWITCHTF=day,FILEWRAP=on
icm/HTTP/logging_client_0 PREFIX=/,LOGFILE=devc_http.trc,MAXSIZEKB=50000, SWITCHTF=day,FILEWRAP=on
and then restart the ICM (tcode SMICM and soft restart) ... Then, in SMICM, there is a HTTP logs menu that will display contents of these traces, you can often find user/url/rcode in it
But maybe Stefan's solution could solve your issue (I'm not familiar with ACKs )
Rgds
Chris

How to avoid prompting the userid and password in Drop Down Menu

Hey Guys hope you can help me.
I have created a page wherein within that page I have a drop down menu using a javascript here is the code (please see my code below): Now the problem is each time I click any of the selection below the useid and password prompt me.
Is their any way that this can be fixed so that I cann pass the userid and password as a parameter? I have already tried to pass the &SESSION but it does not work.
Please enlighten me on this one....
Thanks,
Henry
<select name="P300_selected_alert" size="1" onChange="bringMeHere(this.options[selectedIndex].value)">
<option value="" selected>-Select One-</option>-->
<option value="All Alerts">All Alerts</option>
     <option value="Acknowledged">Acknowledged</option>
<option value="Unacknowledge">Unacknowledge</option>
<option value="Acknowledged-Resolved">Acknowledged-Resolved</option>
     <option value="Acknowledged-Unresolve">Acknowledged-Unresolve</option>
<option value="Target Name">Target Name</option>
     </select></td>
</td>
<script language="JavaScript1.1" type="text/javascript">
function bringMeHere(a)
if (a == "Acknowledged")
location.href="f?p=103:295:12375097291676676231:NO::";
else
location.href="f?p=103:300:12375097291676676231:NO::";
</script>
---------------------------------------------------

Henry,
See the change I made to your reports region template on page 1, adding the session id to the links as was suggested earlier:
var Session_Id = html_GetElement('pInstance').value;
if (a == "Name")
location.href="f?p=35225:3:"+Session_Id;
else if (a == "Employee")
location.href="f?p=35225:2:"+Session_Id;
else
location.href="f?p=35225:1:"+Session_Id;
And again, you do not want to be hard-coding the application ID anywhere in your code.
Scott

Windows 8.1 start menu button and charms frozen

So sometimes when I try to click the bottom-left start icon, it suddenly does not work. I hover over it but it doesn't change color nor
work at all, but after i restart explorer.exe from task manager it starts working again. This happens randomly, and can happen again in a short while after restarting explorer.exe. I have this same problem on another computer running Windows 8.1 and I have
not installed anything extra on that computer yet. I saw someone say disabling OneDrive syncing would solve this problem, but even if I did that it is still occasionally freezing up. This has been pestering me a while now and is a bit problematic since even
event viewer doesn't have any information on it.
The problem doesn't seem to be explorer.exe as a whole, since the taskbar works and windows open and close properly. I can also view and use
explorer.exe normally (browse files and folders and open programs). However, the charms do not appear and the start button in the bottom-left doesn't work at all, i can't click it to get to the start screen nor right click it to show the menu. In other words
it seems to be the start menu freezing, but there's nothing in event viewer that would indicate a problem. Restarting explorer.exe fixes this problem temporarily, but it keeps happening every now and then.

To anyone experiencing this, it is a bug in Win 8.1 which I can replicate at will.
Reinstalling your system as suggested by MS engineers will not fix this.
To force the bug to appear:
1. Grab a desktop Icon (recycle bin, any shortcut) and move this up to the top left hand corner without letting go of the mouse button. Drop shortcut anywhere on desktop. Without an Icon the mouse pointer would initiate the recent apps.
2. To check that the first step has worked, try and invoke charms by moving mouse to top right hand corner. If Charms do not appear then the bug has been triggered.
3. Now move mouse over start button (no click), move away then back again. Now the start button is locked. If you unlock the taskbar you can move it to any other position (top, left or right) and the start button works. Move taskbar back to the
bottom and the start button still does not work. Only way to get it working again is to restart window explorer in task manager.
To avoid this happening all you need to do is disable recent apps corner.
1. Right click desktop.
2. Click Taskbar and Navigation
3. Click Navigation tab in the properties window
4. Uncheck "When I click the upper-left corner, switch between my recent tabs."
Now the bug cannot be triggered as above to make the start button stop working. You have to remove this feature which is pretty hopeless on a desktop anyway. Its better than restarting Window explorer every time.
I can replicate this on any desktop or laptop, fresh install or old. Not sure about any touch screen machines. I can also trigger this in VMPlayer\Virtual Box and the Modern IE VM images that MS provide.
Now the MS engineers can replicate this on their machines, and maybe if we are lucky they will FIX it!!!!
MS please acknowledge that this is a bug.
Maybe the issue is due to the windows button not being redrawn on the screen once triggered as it still works when taskbar is moved (graphic card drivers). Could not find anything use full in the system logs.
Just noticed also that the charms also breaks if you drag an Icon up to the right hand corner. Once triggered Charms stops working, start button is not affected with the above work around configured.
MS please read this and reply.

Computer doesn't acknowledge Z1s via USB

I have a Z1s, Kitkat 4.4.4, trying to connect to a Lenovo laptop running W8.1. The problem happened after I tried using Helium to backup my stuff. The PC Helium program tried to get me to change my USB connection setting from MTP to PTP, which I wasn't able to (after selecting MTP option, it would freeze for 1 -2 secs then switch back to MTP.
Program never worked and now my computer doesn't even recognize my phone when it's plugged into USB2 port. Tried restarting phone and laptop in varius orders enough times to really annoy anyone. Tried 3 different cables, all of which work fine with another phone. Tried all USB ports on computer. Tried to reinstall drivers via Sony PC connect but can't because my phone isn't even recognized so it doesn't even give me the option. Tried to download xperia z1s drivers from sony but all it is is just the driver (Seriously Sony?! You couldn't even take the 2 minutes to include an installer?!) and I have no idea where or how to install them. Tried to do it manually via Device Manager, but couldn't figure it out, plus I don't think that's the issue. There's no device in Device Manager that resembles my phone to even do a driver update, cuz my computer doesn't even acknowledge my phone when I plug it in.
I think the issue has something to do with either or a combination of: Helium, MTP settings (which I have been searching for on my phone and online and can't find it anywhere. Supposedly it's an option in "Storage" section but I don't have an "Options" menu under "Storage"), my phone being encrypted.
I need to reset my phone but since it's encrypted, I must pull all the data from my microSD card cuz once the phone resets, it, nor anything else won't be able to read the card and must be wiped. That's the only way to unencrypt the SD card or phone.
Does anyone know where the MTP/USB connection settings are? No, they are not found under USB onnection settings that I could find. I really think it has something to do with that.
Thanks in advance!
cyy

Thommo wrote:
Settings - Xperia connectivity scroll to the bottom then USB connection mode
Thanks for the response Thommo. The only option I have under USB Connectivity setting is:
Install Software-"Install software for managing content on your Xperia from a computer" Which I assume directs your computer browser to the download page for the Sony Connect Software
Wireless Media Transfer>Pair with PC-"Set [USB Connection mode] to [Media transfer mode (MTP)]". ***But its faded out and won't let me choose it. I've tried turning on and off Developer Options, along with the USB Debug mode and still doesn't allow me to select MTP setting, with the phone plug into computer or stand alone.
Any ideas?

Acknowledgment in Menu

Similar Messages

Maybe you are looking for