Acknowledgment not possible ..File adapter ..receiver side

Hi XI Friends
In my Simple IDOC to File Scenario...
i am getting successfull meessage in SXMB_MONI.but in sxmb_moni ,the acknowledgment status is not possible.
my inbound inteface is of file and asynchrounous type.
how can i get acknowledgment .
please guid me.
thanks and regards
Ram

Hi,
File adapter does not support Application Acknowledgements.
In your case, turn of the Acknowledgements, by adding the entry in the table <b>IDXNOALE</b> in XI for the Sender Port and idoc type. After this, the Acknowledgement column in MONI will be empty.
Regards,
Bhavesh

Similar Messages

Http to file scenario generate "Acknowledgement not possible"?

Hi.
On PI7.1 we built a http to file scenario and used the RWB "Test message" functionality to test the interface.
Now we get a "Acknowledgement not possible" in sxmb_moni. How can we switch this off.
thanks

Hi
while sending request use either EO or EOIO for Asynch.
EO and EOIO, processing occurs asynchronously and the client only receives a confirmation of receipt with HTTP status u2018200u2019.
Read this
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm

Problem receiving acknowledgement: abap proxy == file adapter

Hi experts,
I am developing an asynchrone interface using PI 7.0. The scenario is: SAP ==> FILE.
In SAP I have created an abap proxy in wich I requested an acknowledgement when calling from the abap code. In PI I have created an Integration Process with a receive step, and a send step. In de send step I am asking for a transport acknowledgement.
When I test the interface and I look in the SXMB_MONI in PI, I see the acknowledgement given back to the IP, but in the SAP backend system I don't receive anything in the abap proxy which had send the original message. In de SXMB_MONI from SAP I see a "?" Still awaiting acknowledgement.
Can anyone help me with this scenario? I really need an acknowledgement from the file adapter in the calling abap proxy.
Regards, Jeroen

You need to crate a REceiver Agreement for this sender...
The Integration Server sends an acknowledgment message back to the sender (CENTRAL_BACK). It uses the name of the sender system for logical and technical backward routing.
If the sender is addressed using an ABAP proxy, you must define a corresponding receiver agreement for this sender.
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
-SM

File adapter receiver channel is not initialized.

Hi
iam wrking idoc-file scenario, as per the requirement i have created 4datatypes 4 mapping in IR with 4 communaction chanles in ID. the scenarios is working fine with 3 mappings.but in 4 the scenario
the file genaraing properly , i have cheked in SXMB_moni payload but it is not creating in destination system
in runtimeworkbench->message-monitaring-> adpater
i have find the below issues
1) File adapter receiver channel CC_DDPWCS_US_TO_101 is not initialized. Unable to proceed: null Error 2) Exception caught by adapter framework: File Adapter configuration not initialized:
3) Error Delivery of the message to the application using connection AFW failed, due to: File Adapter configuration not initialized:.
please tell me how can i reslove the issue
thanks
niru

Hi
i have checked the content convertion and changed as below
the structure is
Row.fieldNamesTrans_Id,Order,Item,Product_Id,Product_desc,Lot_nr,Ship_via,Exp_qty,Carousel_loc,compart,Destination,Label
Row.fieldSeparator     ,
Row.fieldFixedType     char
Row.endSeparator     'nl'
Row.addHeaderLine     4
Row.headerlineTrans_Id,Order,Item,Product_Id,Product_desc,Lot_nr,Ship_via,Exp_qty,Carousel_loc,compart,Destination,Label
even though iam facing the issue. iam wondering "_i have used in the similar structure for other 3 mappings in same scenario those are working perfect "_ but based on condition if 4 th mapping is executed iam facing the problem
error message in RWB/Adapeters
File adapter receiver channel CC_DDPWCS_US_TO_101 is not initialized. Unable to proceed: null
Error Exception caught by adapter framework: File Adapter configuration not initialized:
Error Delivery of the message to the application using connection AFW failed, due to: File Adapter configuration not initialized:.
please help if any of you face the similar situation , i struck-up long ago here
regards
niru

XI IDoc Acknowledgement - Acknowledgement not possible status

Hi Experts,
My scenario:
SAP IDOC - XI - jdbc (oracle)
Problem:
Getting the infamous "Acknowledgement not possible" status in SXI_MONI. I only need the transport acknowledgements back to SAP not the application acknowledgements. The messages themselves route fine from source to destination.

check if this blog helps you:
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
From the blog:
The system acknowledgement sent by the file adapter is converted into an ALE audit message and sent
back to the sender SAP system by an IDOC ACK channel configured in XI(an IDOC receiver adapter).
For your info:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
Edited by: abhishek salvi on May 15, 2009 10:48 AM

File adapter: Receiver File Content Conversion problem.. XML to CSV..!!

Hi,
I am facing some problem in FCC for Receiver adapter. It has to convert from XML to CSV File.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:PaymentFull_Target xmlns:ns0="http://sdn.com/Payment">
- <RECORDSET>
- <Header>
<LineItem>1</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
- <Header>
<LineItem>2</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
- <Header>
<LineItem>3</LineItem>
<SaleNumber>102</SaleNumber>
<TransNumber>105</TransNumber>
<Store>1326</Store>
<variant>Z6</variant>
<TransType>NEW</TransType>
<Adjustm_Type />
</Header>
</RECORDSET>
</ns0:PaymentFull_Target>
Output File is coming only with lineitem values , remaining fields are not coming.
*1,2,3*
FCC Used...
RecordSet Structure -- Header
Header.fieldNames -
LineItem,SaleNumber,TransNumber,Store,variant,TransType,Adjustm_Type
Header.fieldSeparator----- ,
Header.endSeparator----- 'nl'
Did I miss anything.. any idea whats going wrong?
Thanks
Deepthi

Hi Deepthi,
Mention the occurrence of header in Recordset
You specify like this:
Recordset: Header, *
Header.fieldSeparator : u2018Field Separatoru2019
-->For FCC on Receiver side you donu2019t have to mention the field names.
-->The u2018endSeparatoru2019 parameter needs to given for substructure only
Check this links:
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Rgds,
Akhila

How to use File Adapter Receiver to write attachments

Hi,
i have a scenario, in which our own XInotes adapter sends an XIMessage from an IBM Lotus Notes database into XI. This XIMessage contains an XML document as application main document and several PDF files as additional attachments
On the receiver side, i must use a File Adapter to write both the XML documents and the PDF attachments into a directory.
The problem is i don't know how to use the file adapter receiver to write the attachments. In the Channel Monitoring, i can see that all PDF files are transferred to the file receiver. But the file adapter writes only the XML document into the directory.
I've also tried the AF_Modules/PayloadSwapBean, but it can only swap one PDF file into the application payload. And the file name must be hard coded in the module configuration as swap.KeyName.
Could anyone give me any ideas?
thanks a lot in advance
Xiang

hi,
receiver file adapters do not supprt attachments.
Only File Sender adapter is capable of handling attachments not the receiver.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/a20c4cfea96b498b1e1af3f32f0670/frameset.htm
Configuring the sender FILE adapter
The sender file adapter is configured to pick the normal payload (file1.xml), which is specified in the File
access parameters, and the additional image file (file1.jpg) that is to be sent as an attachment is configured
under the Additional File(s) as shown in the screenshot below. The file type would still remain binary.
Since, by default, XI sends payload and attachments in XML format, we need to call two beans, namely the
MessageTransformBean and the PayloadSwapBean to help us is transforming the content to jpeg format
and also change the file extension.
The PayloadSwapBean module is used to replace the application payload of the XI message that holds the
data with another payload which is appended to the message as an attachment. In our case, the payload
would be file1.xml whereas the attachment would be file1.jpg
The swap module is denoted in our scenario with the module key swap. It has two parameters from the
MIME header.
regards,
pradeep.

Acknowledgement not possible though the message was sent successfully

Hello Everyone,
I have the following scenario below.
Sender = R/3
Interface = IDoc - stored procedure
Receiver = JDBC Adapter
I need 2 kind of acknowledgements.
1. If the message got an mapping error in XI/PI we need to send "any kind of ack" back to the R/3 to inform the Team that something happens during the mapping.
I do get a ALEAUD success message when a IDOC is sent to PI .
2. If everything is ok and the message was sent to the MSSQL- I gett an error like "Acknowledgement not possible". AnywayIi don´t need a ack if mapping in XI/PI is successful as it is a asynchronous scenario.
I think it is trying to send back an ack because i have a receiver IDOC channel defined for the R/3 receiver.
How can I get rid of this Acknowledgement not possible information ?
Thank you ,
Teresa

chk this:
1) http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
2) To suppress ack maintain the entries in table IDXNOALE (DO not request ack)

File Adapter Receiver

Hi All,
File to File (CSV)
At the receiver side i am not getting the file it is showing problem in runtime workbench: File Adapter Receiver Channel is not initilaized Unable to proceed : null.
Thanks,
Satish.

<i>File Adapter Receiver Channel is not initilaized Unable to proceed : null.</i>
>>>
1. check if your adapter is active
2. in case you have FCC just remove the same for the time being and check if it can pass the XML version (without FCC). this will confirm if it was a problem with your FCC parameters.
Let us know the proceedings !!!!!

Append the data in file at receiver side

Hi All,
I want dump the data frm SAP tables. the data is hughe so we are sending the data in slots from ECC like 50K recoerds at a time and after that to collect that i using the append parameter at file receiver side and records are getting appended in file only that is correct
but my one doubt is
let say monday the records get append into file at receiver side and on tuesday again the records will get appended in same file....it will be problem for this i used create parameter with overrite my question if i am using create then we can not use append ........
please suggest...........
Regards

Hi gangadhar,
Append will work like this..
if there is no file ..create the file and if file already exists then appends the data to the existing file..
in your case when you create the file with day i.e file_day ..first time when you send 50K records file will get created..
if you send another 50k in the same then will get appended to the same...
in case if you send the another 50K set another day..then a new file will get create as there is no file available with taht file name
i.e filename_nextday...
Hope this clears all your queries
HTH
Rajesh

Message Transferred to Business Service, but acknowledgement not possible

I have an IDoc to Flat File scenario. Flat file communication channel is in a Receiver Agreement for a Business Service.
The message posts fine, but in the acknowledgement there is the familiar problem:
"Unable to convert the sender service BSE_XXXX to an ALE logical system"
I have checked that the Business System has an associated Logical System, and that the Header of the Receiver Agreement has the Sender Service and Receiver Service fields populated. Still I get this problem.
Any suggestions?
BR,
Tony.

hi,
u cant send acknowledgement through the file adapter.
if u r using bpm then only u can do it
plz rewards points
vikas

Unable to clone File Adapter receiver channel for parallel processing

Hi Experts,
I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
Can anybody provide me suggestions to solve this error.
Note : without variable substitution , the interface is working good.
Is it due to, i am trying the source structure field in response file adapter?

Hi,
In your CC, do you use some additional paramaters ?
like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
Mickael

A problem with the File adapter receiver

Hi people,
In the Integration Monitoring the system represent this problem:
File adapter receiver channel Mainframe_FA_StructureAch_CC_RC is not initialized. Unable to proceed: null
Any body can help me!!
Thanks!!

Hi ,
Just check is it Activated ? Go to RWB->Adapter Monitoring
Check the status there ..
To more- Go to service market place to view the Adapter Monitoring PDF
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps.
Regards,
Moorthy

SXMB_MONI - weird message "Acknowledgement not possible"

Hi All,
I Am working on an async scenario of:
ERP -> IDOC -> XI -> PlainHTTP -> 3RDPARTY
I have now got the original message doing all that I want it to, I create it in the ERP system, it goes through XI and ends up at the right place. But I had a few problems with Acknowledgements. First off I had the seemingly infamous "Unable to convert the sender service to an ALE logical system" error, but by searching through the forum and some useful weblogs (thanks Michal..) was able to sort this out (still find it far from obvious that a 3rd party system needs an LS..).
And now my ALE Ack is (seemingly) successfully going back into my ERP system and if I look with Transaction WE05 it says it was processed successfully (code 53, using process code AUD1), plus in the RWB the acknowledgement is shown as having been processed successfully, but SXMB_MONI still shows the icon and message "Acknowledgement not possible" in the list of XML messages, although when I look at the details there are no errors... it is weird and I am tempted to ignore it as it does not seem to be causing any issues but I would love to know why it still displays this message.. any ideas?
Many thanks,
Chris

Hey,
Thanks Udo, I kind of suspected that it was ignorable but it is always nice to see only green lights and clean messages in RWB... So I will move on.. but am still a little confused though, as to what it means to say that acknowledgements are not supported? I can see that an acknowledgment is being created, sent and accepted back into the Sender system (which suggests a certain level of support for acknowledgements..)
So does that mean there are further acks that could/should be sent but are not supported? The acknowledgment documentation I have found does not seem clear on this. Perhaps I am getting the Ack from the IS but not from the plain Http adapter??
Many thanks for your help,
Chris

Acknowledgment not possible

Hi all,
I am doing IDOc to Soap scenario. the scenario working perfectly and data is updatain in target side also. But in SXmb_moni its showing Ack status as "Acknowledgment not possible". What is the reason could you please explain me and how to rectify this...
waiting for you valuable information.
Regards,
Kum

Hi,
this should be helpful:
ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Regards
Patrick
Edited by: Patrick Koehnen on May 5, 2008 3:03 PM

Adapter moduler in file adapter receiver - get Target Directory from param

Hi everybody,
We are in PI 7.1
I need in an adapter module (file adapter receiver) to access to the Target Directory comming from parameters
I foound the code in a weblog
/people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
Here is the code I found
public ModuleData process(
          ModuleContext moduleContext,
          ModuleData inputModuleData)
          throws ModuleException {
          Object obj = null;
          Message msg = null;
          try {
               Channel ch = new Channel(moduleContext.getChannelID());
               obj = inputModuleData.getPrincipalData();
               msg = (Message) obj;
               XMLPayload xmlpayload = msg.getDocument();
               String path = ch.getValueAsString("file.targetDir");
               if (!path.endsWith("
") && !path.endsWith("/"))
                         if(path.indexOf("
")!=-1)
                              path+="
                         else
                              path += "/";
               if (xmlpayload != null) {
                    convert(xmlpayload.getContent(), path);
               inputModuleData.setPrincipalData(msg);
          } catch (Exception e) {}
          return null;
     private void convert(byte[] bs, String path) throws Exception {
          String bs_out = new String(bs);
          String filename =
               bs_out.substring(
                    bs_out.indexOf("<FileName>") + 10,
                    bs_out.lastIndexOf("</FileName>"));
          bs_out =
               bs_out.substring(
                    bs_out.indexOf("<Base64>") + 8,
                    bs_out.lastIndexOf("</Base64>"));
          byte bb[] = com.sap.aii.utilxi.base64.api.Base64.decode(bs_out);
          File f1 = new File(path + filename);
          FileOutputStream fos = new FileOutputStream(f1);
          fos.write(bb);
          fos.close();
The object Channel come s from the package import com.sap.aii.af.service.cpa.Channel;
The jar is in the build path (com.sap.aii.af.service.cpa.jar);
When I write in NWDS
Channel ch = new Channel(moduleContext.getChannelID());
NDWS gives me an error "Cannot instantiate the type Channel".
Can somebody help me about that, please?
Does that code dosn't work in pi 7.1?
Thanks in Advance for your help.
Best Regards.
E. Koralewski
Edited by: Eric Koralewski on Feb 3, 2011 1:40 PM

> When I write in NWDS
> Channel ch = new Channel(moduleContext.getChannelID());
> NDWS gives me an error "Cannot instantiate the type Channel".
it should be:
Channel ch = (Channel) LookupManager.getInstance().getCPAObject(CPAObjectType.CHANNEL, moduleContext.getChannelID());
(taken from sample module ConvertCRLFfromToLF)
http://help.sap.com/javadocs/pi/pi711sp03/index.html?com/sap/aii/af/service/cpa/Channel.html
Edited by: Stefan Grube on Feb 3, 2011 2:02 PM

Acknowledgment not possible ..File adapter ..receiver side

Similar Messages

Maybe you are looking for