Acknowledment No not appearing in FORM16 Output

Hi,
I am generating FORM 16 (TCode : PC00_M40_F16) and acknowledgement no is not appearing even though the data is maintained
in PE03 by functional consultant. When i debugged the program i found in Include  PCF16IN7 i came across
           RP-REF-C4-I1.
           RP-REF-C4-I1-O.
           RP-IMP-C4-I1.
After the above step ,sy-subrc = 4 and below if condition is not working
           IF RP_IMP_I1_SUBRC = 0.
Therefore ACK_TAB is getting refreshed where acknowledgement details were there.
The definition of RP-IMP-C4-I1 was maintained in  PUMAPIN7. What is the meaning of RP-IMP-C4-I1? Please guide.
Regards
K Srin

Hi Srinivas,
Check the related SAP NOTES.
Regards,
Sreedhar.

Similar Messages

  • Text from text module is not appearing in smartform output

    Hi Experts,
    We are using text modules in one of our smartform to print the sender text . The name of this text module is being dynamically determined during the execution and is coming correctly but still the the text inside the text module is not appearing in the output. We checked one more similar form which is working on the similar logic but calling a different text module , there it is working perfectly. I have tried all the possibilties like changing the window size, changing the fonts and other parameters of the text module but still its not appearing . This seems to be something unusual as in both the smartforms(one with text appearing from module and one without the text) the logic is exactly similar for getting the text module name. The name is getting determined in both the cases correctly and the text modules are also maintained in same manner for both these forms but text is appearing on one and not on other.
    Kindly help if any one of you have also faced similar issue.
    Regards

    Hi Priyank,
    There could be various reasons....
    Wrong language for example
    An easy way to prove this is, put the text direct into the smartforms and see, if it pops up immediately.
    If so, you have to really debug this spot and see if the pased name is correct. (Copy paste it in the debugger, to be really sure, there could be a space in fornt or in the end...)
    If that doesn't help, you have to share more details. Your question is not that very specific. You know
    ~Florian

  • Buttons not appearing clearly upon output

    I have created menu buttons (with highlight) that in turn link to the relevant movie file.
    When outputted to DVD these buttons appear blurry and unclear.
    Why are the buttons not appearing in a crisp, clean state when I have outputted them?

    Which version of DVD SP are you using? Are you
    making these over video menus? What size and color
    of fonts/background? They can all play into what is
    happening, usually 20pt + sans serif works best, but
    the text in DVD SP can often leave things to be
    desired from time to time - where are you previewing
    the buttons?
    Thanks for your reply.
    The vesrion Im using is DV Studio Pro 3. The up state color of the buttons are black and over is red. The font size is 13pt Arial Black.
    I have outputted the DVD itself, so I view it through TV.
    Am I on the right track?
    Thanks again.

  • Font not appearing on PDF Output

    Hi,
    We are creating a XSL-FO report in Oracle Applications R12 which uses a special font. I installed the font using XML Publisher Administrator and I can see the font when I click on Preview on the template. But when the report is run from Applications, the same font does not appear. I will really apreciate if anyone can provide a solution to me for this.
    Thanks
    Regards,
    Abhishek

    Hi Abhishek
    When you say XSLFO template do you mean an RTF template or an XSLFO template?
    Where are you previewing the template successfully and to what frmat?
    Regards
    Tim
    http://blogs.oracle.com/xmlpublisher

  • Page numbers not appearing in PDF output past a certain point

    Hi.  I have a very large book layout in Aperture (> 300 pages) which I output to a PDF file (using the Print button followed by selecting PDF).  I have successfully done this many times in the past, but there have occasionally been times when Aperture's output just stops including page numbers past a certain point.  I think what it's doing is deciding on white page numbers for the rest of the book, which doesn't work so well when the background is white.  (I can see this because there are occasional pages which are full bleed, and the page numbers appear in white on those pages).
    Has anyone else come across this?  I have seen this problem for years (Aperture 1, Aperture 2).  The solution seems to be to carefully modify the page layout so that no elements impinge on the location of the page number.  But doing this does not always solve the problem.  Just this morning I duplicated a page, changed its content, then output and... the page numbers just stopped in the output 30 pages *after* this page.  I just changed the page to move a text element up, hoping that this would solve the problem, and now... page numbers stop at page 263 instead of page 98.
    This is a very bizarre and annoying bug.  Extremely annoying.  I am not going to print a book which has page numbers in only the first half or 3/4 of the book.  But if there is no workaround, and Apple seems not to have noticed the problem, I could be stuck.
    Has anyone else seen this?  Any suggestions?  How can I report the bug to Apple?  I can't very well give them the output as an example, as it's about 800 MB.

    Hi leonieDF.  Thanks for your reply!  I didn't know about the "Provide Aperture Feedback" link.
    Alas the Theme is a custom one, it's 9"x11.5" so that the result is 8.5x11" after chopping off 1/4" from all sides.  (The printer does "full bleed" with 1/4" margins).  I originally created it by hand for Aperture 1.5, by simply copying one of the themes and adjusting the dimensions.  (Custom themes weren't possible until Aperture 2, if I remember correctly).  Perhaps that's the source of the issue.  Though I'm not sure how...
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
        <key>pageNumberMargin</key> <string>{4.5,0.35}</string>
        <key>bottomMargin</key>     <string>0.6</string>
        <key>insideMargin</key>     <string>0.6875</string>
        <key>horizontalSpacing</key>    <string>0.05</string>
        <key>verticalSpacing</key>  <string>0.05</string>
        <key>size</key>         <string>(9.00,11.50)</string>
        <key>backSoftcover</key>
        <string>01_BackSoftcover</string>
        <key>defaultTextStyle</key>     <string>Baskerville/14/BlackBackground</string>
        <key>disableFrameScaleAndRotation</key>
        <true/>
        <key>frontSoftcover</key>
        <string>01_FrontSoftcover</string>
        <key>indexPages</key>
        <array/>
        <key>leadingPages</key>
        <array>
        </array>
        <key>repeatingPages</key>
        <array>
            <string>OnePageBleedLayout</string>
            <string>1UpLayout</string>
            <string>1Up2UpLayout</string>
            <string>2UpLayout</string>
            <string>1UpLayout</string>
            <string>OnePageBleedLayout</string>
            <string>1UpLayout</string>
            <string>1UpLayout</string>
            <string>4UpLayout</string>
            <string>5AcrossArrayLayout</string>
            <string>6AcrossArrayLayout</string>
            <string>TwoPageBleedLayout</string>
            <string>2Up1UpLayout</string>
            <string>1UpLayout</string>
        </array>
        <key>trailingPages</key>
        <array/>
        <key>type</key>
        <string>Custom</string>
        <key>version</key>
        <integer>1</integer>
    </dict>
    </plist>
    (Standard themes are in /Applications/Aperture.app/Contents/Resources/Book Themes, custom ones in ~//Library/Application Support/Aperture/Book Themes )

  • Urgent: Custom font style not appearing in PDF output only

    Hi,
    For a customer, I received customer specific font styles(ttf font files) which I installed on my machine and then copied those files in Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts as well as in JRE/lib/fonts. Then I created a template in word and font there appears as custom font.
    Now I am getting that font style in all output formats(rtf,ppt,excel) except the PDF output. I am using Oracle BI Publisher desktop alone. Not sure what I missed because of which text font is not changing in PDF version only. I checked the PDF properties and there also custom font is not getting mapped.
    Thanks in advance.

    Here is the link that describes how to set up the font mapping for PDF output: Look for "Font Mappings (for PDF output)"
    BI Publisher Demo Library&lt;/title&gt;&lt;meta name=&quot;Title&quot; content=&quot;BI Publisher Demo Library&quot;&gt;…http://www.oracle.com/technetwork/middleware/bi-publisher/learnmore/demo-library-toc-173301.html
    Thanks,
    Bipuser

  • Alt text not appearing in WebHelp output

    We are using FrameMaker 10 and RoboHelp 9 to output as WebHelp. In the FM files, I have added alternate text to anchored frames containing images. When I update the linked FM files in my RH project, the screen tip is empty for these images, but when I look at the HTML source for the topic, it shows that the alt text is there:
    <p class="widegraphic"><img alt="Coach completes form and can either submit now or save it as a draft, edit it, and submit it later. After submit, employee receives task or alert notification, and coach receives task notification. Coach can still edit form at this point. Employee acknolwedges form and completes tasks, and employee task changes to complete. Coach completes task, and task status changes to complete. Lastly, coach receives alert or message notification.  "
                                 id="image2" src="using_bpl_form00003.jpg"
                                 style="margin-bottom: 6pt;" border="0" />&#160;</p>
    When I preview the topic in RH and hover my mouse over the image, the alt text appears in the preview window as expected, both in the default window and when I choose to preview in Firefox and IE. However, when I generate the WebHelp and hover my mouse over the images, nothing shows up at all, and the alt text is replaced by the file name:
    <p class="widegraphic"></p>
    <div align="left"><img alt="using_bpl_form00003.jpg" style="margin-bottom : 6pt; " id="image2" src="using_bpl_form00003.jpg" />
    </div>
    If, however, I manually copy and paste the alt text into the screen tip field of the image in the RH topic, the alt text does appear in the WebHelp output:
    <p class="widegraphic"><img alt="Coach completes form and can either submit now or save it as a draft, edit it, and submit it later. After submit, employee receives task or alert notification, and coach receives task notification. Coach can still edit form at this point. Employee acknolwedges form and completes tasks, and employee task changes to complete. Coach completes task, and task status changes to complete. Lastly, coach receives alert or message notification.  "
      id="image2" src="using_bpl_form00003.jpg"
      title="Coach completes form and can either submit now or save it as a draft, edit it, and submit it later. After submit, employee receives task or alert notification, and coach receives task notification. Coach can still edit form at this point. Employee acknolwedges form and completes tasks, and employee task changes to complete. Coach completes task, and task status changes to complete. Lastly, coach receives alert or message notification."
      style="margin-bottom: 6pt;" border="0" />&#160;</p>
    This seems like a pretty major bug to me. I know there have been scripts developed to delete the alt text so that graphic filename won't show up as the alt text, but is there anything that will take the existing alt text and populate the screen tip/title property with it, which seems to be the key to getting this to work in the output? There's no way I can manually copy and paste all the alt text into the images in RH, especially because I'll just end up having to redo it every time I update the linked FM files.
    Thanks,
    Jackie

    Hi Jackie,
    Offhand, your ALT string seems long. A quick search yielded info at http://www.htmlcodetutorial.com/images/images_famsupp_85.html
    If a lengthy description is needed to describe the image, use the LONGDESC attribute to point to the URL of another page which has the lengthy description. Because LONGDESC is not yet sufficiently supported, also follow the image with a "D-link". A D-link is a standard anchor link with contents consisting of the capital letter "D", like this:
    Do you experience the same behavior with short alt strings as well?
    -Matt
    @mattrsullivan

  • New TOC Book not appearing in WebHelp output

    Hi
    My project is proceeding fairly well, considering I've only
    been using RH for about six weeks - thanks, in no small part, to
    the advice I've found in this forum. I'm hoping someone can help me
    with a niggling problem I'm having.
    My project is based on a textbook written by my colleagues.
    RH has successfully imported all the header formatting from Word
    and the resulting TOC is almost perfect. My problem is that my
    header 1s link to sections of the book, so I don't have a header
    that just gives the chapter name. If I do create these as header 1s
    they give me a clickable entry in the TOC which leads to a page
    with no content.
    I'd like to have an entry in the TOC that gives the chapter
    name but which isn't clickable, i.e. is only there so users can
    orient themselves and see what each section is about.
    I thought I could do this by creating a new TOC book in the
    TOC, but not linking it to any page. I've done this, saved
    everything and generated afresh, but when I view the webhelp
    layout, the book I just created doesn't appear in the TOC. Is there
    a way I can do this?
    Thanks in advance.
    Colin

    Hi Colin.
    You may be able to do just this with a bit of wizardry! Check
    out the RoboWizard's
    tips
    'n tricks file. It has help on how to set-up redirect topics.
    Create one of these and assign it to the book. The redirect topic
    would then just redirect the user to another topic.

  • Custom menu item not appearing in HTML5 Output

    I'm trying to add a custom menu item to the top right of a project, it shows up fine in the flash output of a published SCORM file, but it's non-existent in the HTML5 output.
    Has anyone experienced this issue, or have any suggestions for a solution?
    Thanks in advance for any help you can provide!

    I did it through the Skin Editor in Captivate, it is not an external flash menu...I wouldn't expect it to convert flash to html5.  Through the skin editor you can add extra buttons, in the same place you can move the table of contents button, to the "top right".  The problem is, the custom menu items won't even show the text where the link should be in html5, nothing... only when published to flash.

  • Column not appearing in the output

    Hello All,
    I need to make changes to the existing workbook. "Line amount" (Detail)cloumn needs to be manipulated
    Line amiountwas selected in the list. But in the output i am not able to see that line amount in the output.
    But if select line amount (sum) i am able to see. Line amount(detail) i am not able to see.
    Please let me know the reason for this.
    Kind Regards,
    Kumar.

    That seems strange to me. Perhaps some kind of security thing. Though you would think if you can see the SUM aggreagate, you should be able to see the DETAIL. Can you even see the DETAIL to pick it from the item list (open the item to see its available choices)? Maybe you are not opening the item to see the aggregate choices and just picking the item, and it is giving you the default choice, which would be SUM most likely? If you can see the DETAIL choice and you pick it, but you don't see it in the query results, I would contact Oracle Support. I would say in such a situation that you must have run across a programming error.
    John Dickey

  • TOC not appearing in Printed output

    Hello,
    For some reason, my TOC no longer appears in my printed documentation. It worked, at one point, but now I just see "TOC not found" in the document. I'm not sure what happened to cause this. This only happens in the printed documentation. I've tried creating a new TOC, same results. The TOC works in the sample projects. Can anyone help?
    Louley

    Egh? Updating the table. Please use the camera icon in the screen where you reply and include a screenshot of the TOC in Word, or the error it is showing.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Glossary from FrameMaker not appearing in RoboHelp output

    We are using FrameMaker 10 and RoboHelp 9.
    We have user guides in FrameMaker that we want to publish to WebHelp from within FrameMaker.  The user guides in FrameMaker all have a glossary in its own chapter at the end of the guide.
    In FrameMaker, with the user guide book file open/selected, we select File > Publish.
    The Publish Settings window appears.
    We select WebHelp, and specify an ISF file that breaks chapters down into individual HTML files by heading level, then click Publish.
    RoboHelp opens and publishes the content from the user guide to WebHelp, then RoboHelp closes.
    We navigate to the folder that contains the WebHelp files, and launch it.
    There is a glossary node at the bottom of the TOC in the WebHelp, but it is always empty.
    Can someone please explain how to get RoboHelp to include the glossary content from the Glossary chapter in the user guide when it publishes from FrameMaker to WebHelp?  We were hoping that the handoff from FM to RH was seamless, but apparently it is not.
    Thank you!
    Tim

    Hi Tim –
    I am using a different process for single-sourcing our documentation in the TCS – FrameMaker 10 and Robohelp 9. I am creating the files in FrameMaker as book files, with TOCs, Glossaries, and Indexes. I am also conditionalizing some text for online and some for print. However, my workflow, based on a lot of research and watching tutorials, is to link the FrameMaker files in a RH9 project. Then, I use Robohelp to apply the .isf file settings, a FrameMaker template to use for conversion of things like cross-reference formats, a RH master page for the online help, the customized Webhelp skin I want to use, and to do any other small tweaks as necessary since the conversion process is about 90% seamless but not perfect.
    I found that when linking the files (rather than importing, which is a static process), I also get “empty” default TOCs, Glossaries, and Indexes. The solution that I found is:
    1.       After generating html topics from my linked FramMaker book files, I right-click on the book file in the Project Manager pod and select Properties.
    2.       On the Contents tab of the “FrameMaker Document Settings” panel, I check all 3 boxes to “convert FrameMaker” TOC, Glossary, and Index files.  For the TOC, I navigate to the FrameMaker TOC file of my book.
    3.       I select the radio buttons to “Create new associated” TOC, Glossary, and Index and RH insists I name them, so I name them Contents, Glossary, and Index.
    4.       Then, click OK to close this window.
    5.       Back to the Project Manager pod, I right-click my new TOC, Glossary, and Index files (one at a time) and select the option to set these as the Default ones.
    6.       I then have the option to right-click and delete the old (empty) ones (for simplicity’s sake). Everything is then right with my help files.
    Yes, this is a lot of steps. It’s the only workflow I’ve found that produces the result I want (Webhelp versions of my FrameMaker generated files that contain all entries at the correct levels, and are automated). FWIW, I couldn’t find documentation on this process anywhere. I found it through trial and error and hair-pulling :o)
    HTH!
    Virginia Morgan | Technical Writer
    TAKE Solutions, Inc.
    O 512.735.4316 | M 512.426.8323
    [email protected]

  • My devices are not appearing in the output input for sound in system preference the mute is on and i cant uncheck it

    Yesterday I received Mackeeper and I assumed it was from apple. I made the mistake of installing. Then my friend told to get rid of it. I deleted. I shut my computer for the night and today no sound coming from my speakers go to system prefences and its on mute. i try to unclick. howeveer nothing is showing as being in the list for input out . HELP

    In iPhoto menu: iPhoto>Preferences>General. Check the box.

  • Reg : ALV Grid Refresh - Output not appearing

    Hi All ,
    Am calling a screen 100 at 3 different places.
    Though i use refresh_table_display , The value in the output table, say i_final changes, but while displaying the output , the whole screen is blank , even the container is not appearing in the output .
    Can you please help me with your inputs .
    Regards,
    Chitra

    yes it is good ...see the example...for your requirement..
    REPORT yztest .
    TYPE-POOLS: slis.
    Tables
    TABLES: mara.
    TYPES: BEGIN OF ty_name,
           name  TYPE char10,
           age   TYPE i,
           END OF ty_name.
    TYPES: BEGIN OF ty_marks,
           sub1   TYPE i,
           sub2   TYPE i,
           total  TYPE  i,
           END OF ty_marks.
    TYPES: BEGIN OF ty_phone,
           phnum TYPE char10,
           END  OF ty_phone.
    TYPES: BEGIN OF ty_addr,
           address TYPE char20,
           END  OF ty_addr .
    Output internal table
    DATA: itab TYPE TABLE OF ty_name,
          wa   TYPE ty_name,
          itab1 TYPE TABLE OF ty_marks,
          wa1  TYPE ty_marks,
          itab2 TYPE TABLE OF ty_phone,
          wa2  TYPE ty_phone,
          itab3 TYPE TABLE OF ty_addr,
          wa3  TYPE ty_addr.
    ALV Grid
    DATA: r_grid  TYPE REF TO cl_gui_alv_grid,
          r_grid1 TYPE REF TO cl_gui_alv_grid,
          r_grid2  TYPE REF TO cl_gui_alv_grid,
          r_grid3  TYPE REF TO cl_gui_alv_grid,
          g_dock TYPE REF TO cl_gui_docking_container,
          g_dock1 TYPE REF TO cl_gui_docking_container,
          g_dock2 TYPE REF TO cl_gui_docking_container,
          g_dock3 TYPE REF TO cl_gui_docking_container,
          g_dock4 TYPE REF TO cl_gui_docking_container,
          it_fieldcat  TYPE lvc_t_fcat,
          it_fieldcat1 TYPE lvc_t_fcat,
          it_fieldcat2 TYPE lvc_t_fcat,
          it_fieldcat3 TYPE lvc_t_fcat,
          wa_fieldcat TYPE lvc_s_fcat.
    DATA picture TYPE REF TO cl_gui_picture.
    DATA url(255).
    CLEAR url.
    DATA  init.
    START-OF-SELECTION.
      wa-name = 'test01'.
      wa-age = '1'.
      APPEND wa TO itab.
      wa-name = 'test02'.
      wa-age = '2'.
      APPEND wa TO itab.
      wa-name = 'test03'.
      wa-age = '3'.
      APPEND wa TO itab.
      wa1-sub1 = '11'.
      wa1-sub2 = '22'.
      wa1-total = wa1-sub1 + wa1-sub2.
      APPEND wa1 TO itab1.
      wa1-sub1 = '22'.
      wa1-sub2 = '33'.
      wa1-total = wa1-sub1 + wa1-sub2.
      APPEND wa1 TO itab1.
      wa2-phnum = '99999999999'.
      APPEND wa2 TO itab2.
      wa2-phnum = '888888888888'.
      APPEND wa2 TO itab2.
      wa2-phnum = '777777777777'.
      APPEND wa2 TO itab2.
      wa3-address = 'HItech City'.
      APPEND wa3 TO itab3.
      wa3-address = 'Secunderabad'.
      APPEND wa3 TO itab3.
      wa3-address = 'Hyderabad'.
      APPEND wa3 TO itab3.
      PERFORM display_image.
      CALL SCREEN 100.
    *& Module STATUS_0100 OUTPUT
    text
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'LISTOUT1'.
      SET TITLEBAR 'LIST1'.
      wa_fieldcat-fieldname = 'NAME'.
      wa_fieldcat-seltext   = 'NAME OF THE STUDENT'.
      wa_fieldcat-coltext =   'NAME OF THE STUDENT'.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname = 'AGE'.
      wa_fieldcat-seltext   = 'AGE OF THE STUDENT'.
      wa_fieldcat-coltext =    'AGE OF THE STUDENT'.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'SUB1'.
      wa_fieldcat-seltext   = 'SUBJECT1'.
      wa_fieldcat-coltext =    'SUBJECT1'.
      APPEND wa_fieldcat TO it_fieldcat1.
      wa_fieldcat-fieldname = 'SUB2'.
      wa_fieldcat-seltext   = 'SUBJECT2'.
      wa_fieldcat-coltext =    'SUBJECT2'.
      APPEND wa_fieldcat TO it_fieldcat1.
      wa_fieldcat-fieldname = 'TOTAL'.
      wa_fieldcat-seltext   = 'TOTAL'.
      wa_fieldcat-coltext =    'TOTAL'.
      APPEND wa_fieldcat TO it_fieldcat1.
      wa_fieldcat-fieldname = 'PHNUM'.
      wa_fieldcat-seltext   = 'PHONE NO'.
      wa_fieldcat-coltext =    'PHONE NO'.
      APPEND wa_fieldcat TO it_fieldcat2.
      wa_fieldcat-fieldname = 'ADDRESS'.
      wa_fieldcat-seltext   = 'ADDRESS'.
      wa_fieldcat-coltext =    'ADDRESS'.
      APPEND wa_fieldcat TO it_fieldcat3.
      IF g_dock IS INITIAL.
        CREATE OBJECT g_dock
                      EXPORTING
                      repid     = sy-repid
                      dynnr     = sy-dynnr
                      side      = g_dock->dock_at_left
                      extension = 300.
        CREATE OBJECT r_grid
                  EXPORTING
                  i_parent = g_dock.
      ENDIF.
      IF g_dock1 IS INITIAL.
        CREATE OBJECT g_dock1
                      EXPORTING
                      repid     = sy-repid
                      dynnr     = sy-dynnr
                      side      = g_dock1->dock_at_right
                      extension = 300.
        CREATE OBJECT r_grid1
                  EXPORTING
                  i_parent = g_dock1.
      ENDIF.
      IF g_dock2 IS INITIAL.
        CREATE OBJECT g_dock2
                      EXPORTING
                      repid     = sy-repid
                      dynnr     = sy-dynnr
                      side      = g_dock2->dock_at_top
                      extension = 100.
        CREATE OBJECT r_grid2
                  EXPORTING
                  i_parent = g_dock2.
        IF g_dock3 IS INITIAL.
          CREATE OBJECT g_dock3
                        EXPORTING
                        repid     = sy-repid
                        dynnr     = sy-dynnr
                        side      = g_dock3->dock_at_top
                        extension = 100.
          CREATE OBJECT r_grid3
                    EXPORTING
                    i_parent = g_dock3.
        ENDIF.
        IF NOT itab[] IS INITIAL.
          CALL METHOD r_grid->set_table_for_first_display
            CHANGING
              it_outtab       = itab
              it_fieldcatalog = it_fieldcat.
        ENDIF.
        IF NOT itab1[] IS INITIAL.
          CALL METHOD r_grid1->set_table_for_first_display
            CHANGING
              it_outtab       = itab1
              it_fieldcatalog = it_fieldcat1.
        ENDIF.
        IF NOT itab2[] IS INITIAL.
          CALL METHOD r_grid2->set_table_for_first_display
            CHANGING
              it_outtab       = itab2
              it_fieldcatalog = it_fieldcat2.
        ENDIF.
        IF NOT itab3[] IS INITIAL.
          CALL METHOD r_grid3->set_table_for_first_display
            CHANGING
              it_outtab       = itab3
              it_fieldcatalog = it_fieldcat3.
        ENDIF.
    if   g_dock4 is initial.
        CREATE OBJECT g_dock4
                      EXPORTING
                      repid     = sy-repid
                      dynnr     = sy-dynnr
                      side      = g_dock4->dock_at_bottom
                      extension = 100.
        CREATE OBJECT picture
                          EXPORTING parent = g_dock4.
        CALL METHOD picture->load_picture_from_url
          EXPORTING
            url = url.
        init = 'X'.
    endif.
      ENDIF.
    ENDMODULE. " STATUS_0100 OUTPUT
    *& Module USER_COMMAND_0100 INPUT
    text
    MODULE user_command_0100 INPUT.
      CASE sy-ucomm.
        WHEN 'BACK'.
          LEAVE PROGRAM.
      ENDCASE.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    *&      Form  display_image
    FORM display_image .
      DATA query_table LIKE w3query OCCURS 1 WITH HEADER LINE.
      DATA html_table LIKE w3html OCCURS 1.
      DATA return_code LIKE  w3param-ret_code.
      DATA content_type LIKE  w3param-cont_type.
      DATA content_length LIKE  w3param-cont_len.
      DATA pic_data LIKE w3mime OCCURS 0.
      DATA pic_size TYPE i.
      REFRESH query_table.
      query_table-name = '_OBJECT_ID'.
      query_table-value = 'ENJOYSAP_LOGO'.
      APPEND query_table.
      CALL FUNCTION 'WWW_GET_MIME_OBJECT'
        TABLES
          query_string        = query_table
          html                = html_table
          mime                = pic_data
        CHANGING
          return_code         = return_code
          content_type        = content_type
          content_length      = content_length
        EXCEPTIONS
          object_not_found    = 1
          parameter_not_found = 2
          OTHERS              = 3.
      IF sy-subrc = 0.
        pic_size = content_length.
      ENDIF.
      CALL FUNCTION 'DP_CREATE_URL'
        EXPORTING
          type     = 'image'
          subtype  = cndp_sap_tab_unknown
          size     = pic_size
          lifetime = cndp_lifetime_transaction
        TABLES
          data     = pic_data
        CHANGING
          url      = url
        EXCEPTIONS
          OTHERS   = 1.
    ENDFORM.                    " display_image
    *&      Module  EXIT  INPUT
          text
    MODULE exit INPUT.
      CALL METHOD g_dock->free.
      CALL METHOD g_dock1->free.
      CALL METHOD g_dock2->free.
      CALL METHOD g_dock3->free.
    ENDMODULE.                 " EXIT  INPUT

  • Problem - Column title not appearing in excel sheet

    Hi Gurus,
    I am working on a report where I need to add two fields in the output ( Excel format). I have included the fields in the output structure.While debugging my final internal table has both the new headers and their value.But both the heading and data are not appearing in the output because the contents in the internal table are converted to XML and it is converted to excel.Any suggestions to find the locus where it has gone wrong.

    Hi,
    How come the internal table values are gettin converted to XML ?? ...Are you doing it...
    Any way.. use the function module GUI_DOWNLOAD.......
    Make sure you transfer the contents of the internal table which you want to transfer to another internal table, in which the fields should be of type STRING or CHAR.
    Let me know if its workin.
    Regards.

Maybe you are looking for