Acrobat 9 Redaction Formatting Error Problem

I have XP Pro and running trial version of 9 Pro. I am using a document converted from Word to PDF. When I apply redactions and save document some of the formatting (like paragraph indents and spacing including spacing within a word) become erratic throughout the document. Bassically the document is unsuably altered from original. This does not happen when simply saving the PDF BEFORE any redactions are applied (or other features as far as I can tell). Is there any way to fix this? Is it a bug? I can't find anything in the knowledgebase. The whole reason I'm using the trial version is I want to test drive the redaction feature so any help would be appreciated.
Darren

Sorry this is in english. Meine Deutsche ist nicht gut.
Silent mode causes the installer to ignore your license value. It seems to work to add the license key to the command line:
Msiexec /i acropro.msi /T acropro.mst /log acrobat9.log /qb ISX_SERIALNUMBER = XXXXXXXXXXXXXXXXXXXXXXXX

Similar Messages

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Trying to convert a pdf to a word doc using Acrobat XI Pro. I am getting formatting errors and scrambled text, especially right below headings. Not all headings affected, just some, but all the same paragraph tag. Any ideas?

I am trying to convert a pdf to a word doc. The pdf was created in Framemaker. I am using Acrobat XI Pro and getting formatting errors and scrambled (or missing) text, especially below a heading. Any fixes?

Hi pakbecker,
Please try updating to Acrobat 11.0.7 and check.
In case you still face issues, i would like to have a look at th doucment.
Send me an email at [email protected]
Regards,
Rave

Unrecognized database format error when trying to access addin to Acrobat reader?

I get an "Unrecognized database format" error when trying to access addin to Acrobat reader so I can use Pro to edit a pdf document? What do I do so that teh ACCESS program aI am generating PDF's from uses Pro and not Reader?
Thanks,
Dan

Adobe Reader and Acrobat Professional are 2 different products. Reader is for free and limited as to what it can do an support.
Add-ins can only use features supported by Reader.
You need Acrobat to edit PDF forms. Acrobat no longer supports access to SQL databases through Acrobat JavaScript.
If you have an add-in and Acrobat can use it for filling a PDF form from Access, you need to talk to the developer to see if it can work with Reader.

SERIOUS ADOBE ACROBAT PROFESSIONAL 8 ERROR

Hi
I am using (or TRYING to use!) Adobe Acrobat Professional 8.
But every time it loads up I receive the following pop-up message:
"A serious error has been detected and Adobe Acrobat 8 Professional cannot continue. Please re-install the application and try again."
I click OK, and then another message appears:
"Acrobat.exe - Application Error
The instruction at "0x05bf1243" referenced memory at "0x12284e88". The memory could not be "written".
Click on OK to terminate the program"
I have tried uninstalling and re-installing but the error comes back!
What can I do?? Can ANYONE help?!!

I've been watching this thread hoping to find an answer to nearly the same issue... "Acrobat Cannot Continue At This Time Until You Open Photoshop" (?)
It doesn't matter which application I open... Acrobat is worhtless and closes in roughly 5 seconds. Hard to believe Adobe's been unable to duplicate this in-house? Now I'm afraid to uninstall it and reinstall ver. 7. I already had to FORMAT my Vista install and deal with Microsoft requiring personal information before allowing me to authorize my copy of Vista Ultimate a second time, just to get Photoshop CS3 installed on my PC following the beta fiasco.
And to think I installed Vista in the first place because I wanted to be able to use Bridge 2.0....
Jeff, why couldn't there have been a list of files and registry entries to be removed posted? Some sort of procedure to help out those of us that didn't install the Photoshop beta to the default drive or directory? The WinClean tool did NOT work for me, (or several others I'm aware of).
As it looks, the same thing is happening now with Acrobat 8. Those of us with problems are out of luck after spending a lot of money on a productivity suite of tools. After all the problems I had with getting Photoshop CS3 on my computer from Creative Suite, I installed it from a stand-alone version before installing the rest of the suite to gain use of Dreamweaver, etc., (which ALSO crashes my entire system every 2nd or 3rd time I use it!).
I don't mean to be ragging on it, but I am a bit confused after using Adobe products for as long as they've been around...
Thanks.

Adobe Acrobat has encountered a problem and needs to close.

Just recently when I launch Acrobat X after about 10 seconds I get this error, "Adobe Acrobat has encountered a problem and needs to close. We are sorry for the inconvenience." I can create PDFs and open PDFs for 10 seconds. I've done a repair of Acrobat, I tried a new user account, and I disbled all my start up items. I still get the same error I have no clue what to do. Any suggestions?
J.R.

OK Will, I pressed ctrl + Shift and double clicked on a desktop icon of a file.pdf I had saved there and it opened and is still open. By not pressing ctrl + Shift the file opens then closes with that error in about10 seconds.
So now, what has that proved to us is the issue? Doesn't that load Acrobat without all the extensions?
This issue just started a few days ago and all I remember installing on my computer were some Window's updates.
J.R.

Bex Analyser : Date Format error.

Hi All,
We are facing date format error, while running the query in Bex analyzer.
We have one column in report i.e Net Payment Date, so when we run the query in analyzer the single date like "5-6-2010 is getting swapped like 6-5-10 & year also showing two digits i.e instead of 2010 it shows 10" & date like "12-09-2010 is coming perfectly."
Means the date which is in single digit we are facing this problem like 1 to 9 & the dates which are 10 & above showing perfectly.
In RSRT the query showing proper result, so i don't think it's BI problem.
The regional setting is DD-MM-YYYY & Date separator is '-' & we don't want to change this format.
Is there any SAP note or any solution for this..??
All the replays are gr8ly appreciated.
Thanks,
Santosh

Hi Santosh,
how about web display? is it ok? for me it seems more an Excel problem, so maybe you should check if there is special formatingin this.
Regards,
Anass

FF_5 - Import Bank Statement, Err: Formatting error in the field COBL-KOSTL

Hi
When importing the bank statement I'm getting the error
Error: (00 298) Formatting error in the field COBL-KOSTL ; see next message
Why is it doing this? In OKB9 I have the GL Account and the cost center assigned. It is the ne GL that is giving this problem, in the classic GL I do not have this problem.
Thanks in advance

Hi
No, it is not that. For some reason in the new GL it does not seem to determine the cost centers and profit centers as usual.
For exampl to allocate the Profit Center for Balance Sheet Account I used to use 3KEH in the classic gl but in the New gl we must use FAGL3KEH.
Now with cost center i'm having the same problem, does not determine the cost center when importing the bank statement.
Can someone help me.
Thanks in advance
Edited by: Louis De Gouveia on Mar 3, 2009 7:07 AM

Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal

Hi All,
I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
#mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
I am getting the error
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Please anybody can help me to resolve this problem.
Thanks in Advance.

How large is the device that you are formatting?
The default journal size depends on the type specified. If none specified,
then it assumes "mail" which sets the default journal per slot to 256M.
If database type, default is 64M.
Use "-T database" to specify database type, etc.
BTW, one can always override the defaults. Say "-J size=16M" to make
a smaller journal.
man mkfs.ocfs2 and the user's guide has more.

After Effects CS6 format error 45::35

I'm getting "After Effects Error: Photoshop File format error 1. (45::35)" in AE CS 6 with .IFF's from Maya. I know this is nothing new, this problem has been around for a loooooong time.
We like here at ABC like .IFF since it's native to Maya and a small file with alpha.
Close and open AE and it works for a while then the error appears, rather than me doing a work around and converting to another format, my question is: When do you think Adobe will have a solution?
Ray

The better question actually is: When will Autodesk stop "enhancing" the IFF format? There really is two sides to the equation and as long as Autodesk implement undocumented changes (including trivial stuff like incrementing the IFF version number in the metadata), any other company can only paly catch-up. Also the format has this odd "quality" where byte errors do not necessarily affect the visible data, so rendering errors may not actualyl show up unless you open the files in anotehr program. I understand your rationale for using it, but it really is not the best format for heterogenous workflows involving apps from different vendors. TIFFs are so much nicer...
Mylenium

Incomplete installation of Adobe Acrobat Pro X - ERROR: DW006 - ERROR: DW050

Hi,
On trying to run a failed update from Adobe, my Adobe Acrobat Pro X became corrupt and failed to open.
I am now trying to reinstall the software, but the software does not install successfully with Exit Code: 6 and the following key warnings and errors:
WARNING: DW022
WARNING: DS013
ERROR: DW006
ERROR: DW050
The full error message is as follows:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW006, DW050 ... WARNING: DS013, DW022 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 6 warning(s)
WARNING: DW022: AdobeCode {AC76BA86-1033-F400-7760-000000000005} NonAdobePayload Acrobat Professional 10.0.0.0 with version (2012-03-05 05:30:16.288604) already installed with incompatible version (2011-03-17 01:56:17.451315)
WARNING: DS013: Payload {0175676F-8C92-49F2-9131-D0D6AD654B41} AdobeHelp 3.4.0.0 is already installed and the session payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
ERROR: DW050: - Acrobat X Pro : Install failed
Please help! I uninstalled the corrupt version X before this installation attempt.
I also still have Acrobat Pro 9 on my machine as backup (for this precise reason) but don't believe this is the problem as they have co-existed without a problem for near a month now. The corruption in version X occured after this morning's failed update from Adobe.
Many thanks,
K

Thank you! That did indeed do the trick
Must have been a font or something causing the problems, as opening in safe mode allowed the software to install correctly.
Thanks again!!
K
Date: Fri, 31 Aug 2012 05:28:15 -0600
From: [email protected]
To: [email protected]
Subject: Incomplete installation of Adobe Acrobat Pro X - ERROR: DW006 - ERROR: DW050
    Re: Incomplete installation of Adobe Acrobat Pro X - ERROR: DW006 - ERROR: DW050
    created by techkid123 in Downloading, Installing, Setting Up - View the full discussion
Hi.
The error message as displayed in the above error log is EXIT CODE 6.
Please try and follow the below mentioned KnowledgeBase Doc
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Hope it Helps
Thanks
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4662988#4662988
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4662988#4662988. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Acrobat 9. Error 14

Acrobat 9. Error 14
I had my computer crash and apparently corrupt a 363 page PDF manual. When I tried to modify and save it, I got the infamous Error 14, can’t save this file, problem reading the document. I could not copy old buttons or install new buttons, but I found several invisible buttons with no properties that I didn’t install. I could not delete or modify the invisible buttons. I tried deleting the offending pages and saving the file but I had the same problem. I then unchecked the auto saves and optimizes document settings and was able to save the file. But I still had the same problem with the buttons. In desperation I selected the combine file and selected the existing file and combined to a new file. Voilà! Everything started working again. Can anyone tell what they think happened.
Thanks

The pdf file suffered from directory errors from the hard disk crash. While the pdf file you now have appears to work, it might be a good idea to retrieve the original pdf from a backup.
Ancient Proverb: There are two types of people in the world, those that back regularly and those that haven't lost data recently.

URGENT: Bug in Adobe Acrobat X /// Acrobat.exe Runtime Error! R6025 - pure virtual function call

Hello
I work usually with large PDF documents, and I was trying to convert a PDF document of 1000 pages ONE THOUSAND PAGES, to little PDF documents of 10 MB each one.
When I tried to convert the PDF file into little ones, craaashhhhhhhhhhhhhhhhhh
I got this message:
Acrobat.exe Runtime Error! R6025 - pure virtual function call - Microsoft Visual C++ Runtime Library
This seems to be a BUG AS BIG A GRAND PIANO... so I would like someone from Adobe tell me how may I solve this problem or if they will release an update soon?
Thank you

This is a user to user forum and we don't post information here (or anywhere else public) about what may or may not be in future patch releases.
If you have a bug with an Adobe product you must report it using the correct form.

Can't upload files--"Acrobat has encountered a problem"

I'm experimenting with Acrobat. com as a way to collaborate with peers across the country. Seems like an ideal answer. I'm testing the "free," 2-person version at the moment, and can't seem to upload files to My Workspace. I'm trying to upload two files individually--the first a small MS Word file, the second a 1mb PowerPoint. Each attempt produces an "Acrobat has encountered a problem" error message. I can't even upload a photo of myself for my profile. At first, I thought it might be a firewall/proxy problem, but I ran all the Adobe diagnostics. Everything tested fine. I'm even able to establish video connection in the ConnectNow workspace. I'm working off a T3 pipeline, so I don't think its a volume problem. Help.

Hi, can you tell exactly what requirements exist?
I am having the same problem when I try to upload a file. My Admin has opened the site Acrobat.com for me and I can access Acrobat.com via browser, but not upload PDFs. I also cannot upload files for review from other Adobe products (RoboHelp or Acrobat).
This whole issue seems rather strange to me - an online reviewing process should be designed for professional users and these user are typically behind a firewall. Therefore it would be most important to pinpoint exactly which access rights are required, rather then let the user try and stumble around themselves.

APEX on Oracle XE PDF printing produces: Format error: not a PDF or corrupted.

Dear fellow Apexers and Oracle Gurus,
I have the following configuration:
Oracle XE 11gR2
APEX 4.2.3.00.08
Listener 2.0.5
On this setup I can create workspaces and applications as I please.
Now I want to print a PDF report.
I have set up PDF printing to "Oracle Listener" in the "manage Instance" settings in the instance administration.
I have created a classical report on the EMPLOYEES table (Select * from EMPLOYEES)
and enabled PDF printing in the "Printing" area of the "Print Attributes" of the page.
When I run the page I do get the "print" link on the bottom of the page.
Clicking the link does produce a .PDF but showing this file triggers an error in my PDF reader: Format error: not a PDF or corrupted.
Opening the .PDF file in a text editor reveals the corrupt content.
%PDF-1.4
%ª«¬
Unknown function: gatherContextInfo
The same setup works fine and produces the expected PDF file with the report on the following configuration:
Oracle Vbox with Developer days image;
DB 11gR2
Upgraded to apex 4.2.3.00.08
Listener 2.0.5
Since the PDF shows "unknown function" I suspected the XE configuration to lack some of the necessary rights, maybe I forgot to configure the ACLs correctly.
So I compared the ACL info on both configurations. Alas,.. on both machines they return the same result..
SQL> SELECT * FROM DBA_NETWORK_ACLS
HOST         LOWER_PORT    UPPER_PORT    ACL
localhost    null          null           /sys/acls/local-access-users.xml
*            null          null           /sys/acls/power_users.xml
SQL> select * from dba_network_acl_privileges
ACL                                  PRINCIPAL      PRIVILEGE   IS_GRANT    INVERT
/sys/acls/local-access-users.xml     APEX_040200    connect     true        false
/sys/acls/power_users.xml            APEX_040200    connect     true        false
Anyone any idea why this works fine on the Vbox and not on the local XE configuration?
Any hint or answer as to where the problem might be is appreciated
TIA
Wouter

I'm having the same issue. I'm using Oracle XE 11gR2 as well. I've tried with APEX 4.2.2 and APEX 4.2.4. I have set up the Oracle Listener in instance settings and set the report to print and I have the same result as you. Have you had any progress yet?
Thanks
Jason

Acrobat 9 Redaction Formatting Error Problem

Similar Messages

Maybe you are looking for