Acrobat Pro 8 Printing Problems with Xerox 252 Fiery

printer: Xerox 252 with Fiery Controller
Software: Acrobat Pro 8
OS: WinXp pro
The problem occurs when I am printing a binder that consists of 8x11 and 11x17's. The printer locks up and does not print. We have had the Xerox techs come out but after numerous trouble shooting efforts we came to a conclusion that there is an issue with Acrobat 8.
Also, in order to print an 8x11 or 11x17 there is a need to go through and set the file size for each time we print. The check box "print by pdf source size" is checked and we are still having problems.
I've had no issue with Acrobat 7 and the problems I'm having are with Acrobat pro 8.

Correction it's a Xerox Docucolor 242 PS with Fiery

Similar Messages

Acrobat Pro - Printing Problems

I've just started having problems printing from Acrobat Pro 9.0. I've heard there might be a patch or something to solve this issue, but can't find anything. I realize that this is an old program, but don't have the funds to upgrade, so have to stick with what I have. The problem occurs every time I try and print a PDF that was created in Illustrator or InDesign (it says that there are no pages selected or it just funnels through like it's going to print, but nothing happens and it disappears from the print queue. Occasionally I have a problem printing PDF's that were created from other sources (or downloaded from the web) - most of the time these take at least 15 minutes or so to print each page.
This just started happening. I don't have problem printing from other programs, just Acrobat Pro. Any help that anyone can send would be greatly appreciated!!

Thank you for responding to all of my questions and helping with this problem. I'm sorry, but I'm not sure how to apply these. I've opened up the link and it wants me to connect to a server…I selected guest. It doesn't connect to anything. I'm not exactly sure what I am supposed to be doing with this.

Acrobat Pro V8 problem with rotating PDFs

I have CS3 suite with Acrobat Pro V8.1.2 running on OSX 10.5.4.
I rotate PDFs for our printer (photographic Lightjet430 laser printer using postershop) it saves time, and it also makes things easier for us in general.
Now I sometimes rip the PDFs into photoshop, this is where my problem starts.
If a PDF say 500mm wide X 2000mm high is rotated in Acrobat and re-saved so now 2000w X 500h. If I open this in Photoshop it shows me a preview as 2000wx500h BUT the size is reported as 500w X 2000h. If you then rip this PDF it will rip as 500mm wide X 125mm high (Wrong). The only way around this is to rotate this PDF back to 500w X 2000h then rip again and it will then rip as 500x2000.
Now if I get this PDF and rotate using OSXs Preview, it will work. I open the PDF that I rotated in Preview and photoshop will show and tell me that it is 2000Wx500H and it rips as 2000x500.
I have 7 other Macs with the same setup and they all do the same thing. I got a friend on a PC using XP and Acrobat 8.1.2 and it also did the same thing.
Using another PDF program on his PC made it work.
Now for some reason the Newer version of PosterShop 7.1 (wasn't a problem with Postershop 6.5) is doing strange things with PDFs rotated in Acrobat Pro V8.1.2. A PDF rotated in Acrobat to a Landscape will open as a Portrait. Leave the PDF as a Portrait and it will open as a Portrait. Now rotate the same file using Preview to a Landscape and Postershop will open it as a Landscape.
Its like something in the PDF is not being changed to say its rotated, so both Photoshop and postershop get it wrong. Now the problems in Postershop may not be related, but even Photoshop is seeing this and ripping it wrong.
Is there any thing I could try?
I have got the rest of the team using Preview atm to rotate files for now.
Thank you.

My biggest issue GKaiseril is that this is something developed at a higher level than my department. You can find the Fillable PDF and Excel conversion spreadsheet at : www.dodprocurementtoolbox.com. I am not apart of the development team, just apart of a property team trying to get our attachment right. This has been an ongoing issue we've tried to resolve for a while now. The solution I posted above makes the file work, but I don't know if its a "solution" or a temp fix. If I can figure out what the actual issue is, I can suggest an actual fix to the machine or process.

Adobe Acrobat Pro Printing Problem

Hello everyone I have Adobe Acrobat Pro 9.5 and when I print a file I have some issue with the design elements. I have a american flag and has some areas which expand. Below is a picture of what the file should look like:
No what happens is the file prints like this:
Please not the expanded white area in between the red stripes on the american flag. This may vary from file to file, but I cannot have this since these will be sent out to a customer for approval. I have tried Adobe Illustrator, and have no problem with the file. I have saving a PDF from Adobe Illustrator and then printing in Adobe Acrobat Pro for proper color. Any suggestions would be great! I can provide more information also. Thanks!

Without actually having the digital assets to look at, it is a real cr*pshoot to guess as to what is going on here.
What is the pseudo-American flag in term of object types? Vector, raster, what? Perhaps you can point us to the objects to examine?
- Dov

Printing Problem with Xerox 6120

I've connected a Xerox 6120 color laser printer to my home LAN (cable modem to Netgear wireless router). When the printer is turned on the Mini can't get an IP.I've tried using fixed IP for both the Mac and the Xerox to no avail. (FYI, my G3 Pismo Laptop works correctly as does a Dell laptop in this same setting)
Xerox support has acknowledged this problem with the Mini. They told me they've communicated with Apple tech support.
Mini & Pismo Laptop Mac OS X (10.4.3)

Peter,
Sorry I can't help you with your particular question, but I am considering purchasing a Xerox Phaser 6120. Are you generally satisfied and does it work with/support Rendezvous? Thanks very much.

Photoshop Printing Problems with Xerox 7400 Phaser

Cannot get my Photoshop CS5 to print full size documents to Xerox 7400 Phaser. Prints only 1" thumbnail of anything I send to it. This is the only program that has any problem with the Phaser and the only printer Photoshop has a problem with. Unfortunately, it's the only 11x17 color printer in our office. Anyone else had this problem?
I have exported files to other programs, but that lessens quality of photo work and also defeats the purpose of having an expensive, extensive program for it.
WHS

Correction it's a Xerox Docucolor 242 PS with Fiery

Acrobat Pro 9, problems with CS5

I recently installed CS5 over CS4, then I uninstalled all the CS4 programs, keeping Acrobat Pro 9, now when I open Acrobat it gives me the Adobe Acrobat is installed as a part of a suite to run you must open another product pop-up, I have tried running it with Photoshop CS5 but it still gives the same error, I s this because it was connected with CS4, what should I do so I can run Acrobat Pro 9?

Since you uninstalled the rest of CS4 you removed the part that okayed Acrobat 9 to be activated. Uninstall Acrobat 9, then install the version that came with CS5.

Printing problem with 9.4 with Xerox WorkCentre 7435

I have just upgraded my reader to 9.4.0 and having problem with Xerox WorkCentre 7435 printer. I have no problem with this pointer before the upgrade. I got the following error dialog when I print:
Please help.
Thanks.

Try resetting the printing system.
OS X Mavericks: Reset the printing system

Printing Problems with PDF - Adobe Acrobat

Printer - HP Deskjet 3070A
Laptop - Asus Zenbook running Windows 7 Home Premium
Issue: Printing problems with PDF (Adobe Acrobat Reader)
Dear All,
Please help!
My printer was working absolutely perfectly until my brother in law recently needed to borrow my printer. He plugged in his laptop running Windows 8 (awful thing that is). Since he did this to print his own PDF, I cannot print mine.
Although all the text will appear on the page perfectly both in the document view and on actual printing, it appears that some of the transparent formatting stuff on a PDF - such as boxes you have to fill in and transparent areas (such as you find on glorious tax forms) are omitted completely. In fact, in their place I was getting a single black dot. Now, after uninstalling and re-installing updates for the printer, windows 7, adobe acrobat reader, etc.etc. I get squat. Just all the text laid out but none of the shading or boxes.
I have tried fiddling with the printer settings; the print as 'photo' option, dpi settings, greyscale - as much as I can think of and I am thoroughly stumped.
In a desperate attempt, I even installed the Universal Printer Drivers - thinking it might have been that. No. All I got was a page of gobbledygook. Consequently, I uninstalled and reinstalled the normal drivers again.
If there are any wonderful people out there with any fabulous ideas about how I can get my shading and boxes back; I'd very much appreciate it. Sadly I have a tax return to fill out (which is already fabulously late) and need my printer to work!
Much appreciation in advance x

Hey there @Reverie!
Thanks for posting on the HP Forums!
I can see that the printer is no longer printing in the correct format after it was plugged into the Windows 8 computer! You mentioned you have run the updates and uninstalled/re-installed the printer software. Have you uninstalled and re-installed the Adobe software? Are you getting the same issue from other programs as well? Are you getting the same issues if you are logged in as a different user on the computer?
I have located the HP Update Software Utility that may be able to help. You can download an run the utility. It may be able to locate any other updates for the printer.
I would also recommend running a disk cleanup on the computer to clear any temporary files and junk files that may be causing some performance or software issues. If you do not know how to run a disk cleanup on the computer please follow this document regarding Delete files using Disk Cleanup. It is recommended to restart the computer after a disk cleanup. After the restart try the print job again!
Let me know if that helped and thanks again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Printing problem with Summarize Comments?

Printing problem with Summarize Comments in Pro 10.1.6? When I print, I only get the number boxes on one page and the comments on the next page. The numbered boxes don't show up on the actual image itself.

Um I dont know if im doing something daft but I tried this like you said
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if(printJob.printDialog()){
try {
          PageFormat pageFormat = printJob.defaultPage();
          if (pageFormat.getOrientation() == PageFormat.PORTRAIT) {
          landscape = 0;} else {
               landscape = 1;}
          System.out.println("THE ORIENTATION IS "+ landscape);
          printJob.print(); }
catch (Exception PrinterExeption) { PrinterExeption.printStackTrace();}
and it doesnt seem to work as I tried it both as landscape and portrait in the print dialog but landscape is always 0.
cheers
pmiggy

Adobe Acrobat Pro 9 problem

Software:Adobe Acrobat Pro 9 problem
Issue: Whenever the end-user runs the PDF maker in Word 2003, it converts the file fine but when you close the PDF and return to the Word document, it shows the progress bar is still working to create the PDF.
Related? In the Event System log, an error for SidebySide with the Event IDs of 32 and 59. I couldn't determine if these errors relate to each other.
System: Windows XP Professional, sp3

use the below link:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 6| 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Printer problem with AW 6.2.9

I have a recurring printer problem with both hp deskjet 5150 and Epson R220. After much work with techs at both, we have determined that it is an AW problem (v. 6.2.9) Other files print okay. I've searched through recent posts and found similiar questions, but the answers aren't specific to my problem. I gather that it involves trashing certain AW files, such as Appleworks.plist and other Appleworks prefs. It will help it I know the specific files to trash and as much detail about how to find them on the HD. I will be infinitely grateful for any help.
OSR
Mac G4 Mac OS X (10.4.6)
Mac G4 Mac OS X (10.4.6)

Welcome to Apple Discussions
You are correct that deleting the AppleWorks preferences can fix some printing problems. I'm surprised that in finding that information you didn't come across a post with the specific information or a tip to my user tip, AppleWorks has stopped working correctly, that explains which preference files ot delete.
Make sure you have the newest printer driver for each printer. Also, use Disk Utility to repair permissions after any system update or upgrade.

Acrobat Pro 8 Printing Problems with Xerox 252 Fiery

Similar Messages

Maybe you are looking for