Acrobat Reader DC: Too much white making the document hard on the eyes.

I just installed Adobe Acrobat Reader DC. It is difficult to read because of all the white. Is there some way to change the color of the very light drey side panels on either side of the document being displayed?
Thanks in advance.
Mike

Hi 8jvu3qfQR,
I understand your frustration, You can provide your valuable feedback using this link : https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
And, as far as the new Acrobat/Reader DC Interface design is concerned, i would request you to visit this link : Reimagining Acrobat: An Interview with Design Director Jamie Myrold.
Regards,
Rahul

Similar Messages

  • Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

    downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

    Let me give you a slightly different perspective than everyone else here.  You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network.  That's bad.  Very bad, for you, unless you absolutely trust everyone who lives within range of this network.  So stop doing it.
    As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information.  There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot.  Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

  • Since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

    since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

    I've also had the same issues, after upgrading to IOS 6.0, the apps in my iPhone 4 were crashing and the battery life run out very fast.
    The only solution worked for me was to remove all mail accounts (Exchange/Gmail) from my iPhone (in settings) and then add them back.
    The crashing were stopped! also the battery was back to normal.
    I found the solution by first looking at the crash logs (in IOS 6). you can find them at Settings -> General -> About (at the bottom of the About menu you will find the option that opens the logs).
    There i saw many logs about Low Memory crash. 99% of the logs were pointed that the largest process (use the most memory) during the crashes is "dataaccessd".
    I search in the web and found that this process is a deamon process that reponsible the Mail accounts (like Exchange/Gmail) and contancts list.
    I've installed the app "System Status - activity monitor" which shows important system info like CPU usage, Memory usage and running processes.
    Before apply my solution (deleting the mail accounts) i saw that the CPU usage was very high which consume the battery very fast. Also i saw that the memory (RAM) was run out.. which probably what cause the crashing..
    After deleting the mail accounts (at Settings -> Mail, Contacts, Calendars) i check again with the System Status app, and saw that the memory and CPU were back to normal.
    Adding the mail accounts back, still everything work ok
    Hope this solution will help you too,
    Enjoy!

  • Repeated notification that "Adobe Acrobat Reader plug-in" in Firefox is "out of date" after the upgrade is downloaded and installed.

    I have tried to update the Adobe Acrobat Reader DC, along with the plug-in in Firefox v37.0.1. Repeatedly, after the download/installation is "complete", upon opening Firefox I'm met with the message that the "Adobe Acrobat plug-in" is "out of date". I tried rebooting my machine, uninstalling Acrobat Reader DC (which works as a stand-alone), and still the plug-in is never updated (the one listed is from early December 2014) and the reminder always reappears with opening Firefox. Can anyone help with this?

    Sorry about the issue which you are facing. It would be helpful if you could share the firefox notification message screenshot.
    Also, please check that the firefox plugins show the correct Adobe Acrobat Reader DC plugin. If possible, please share the firefox plug in screenshot as well.

  • Would it be too much to ask for Firefox to ignore the "www" when sorting history by site?

    Like it says in the topic question. Would it be too much to ask for Firefox to ignore the "www" when sorting history by site? IE ignores the "www", but not Firefox. It's a real pain to have to look in two places rather than one for a site I previously visited.
    Other than that my migration to FF has been great.

    Hi, as far as I can infer, that term means it's not loading any resources until needed, opposite of this...
    -bind_at_load
                     Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols                when the binary is loaded, rather than lazily.
    https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ld.1.html
    Load resources lazily.
    You should never load a resource file until it is actually needed. Prefetching resource files may seem like a way to save time, but this practice actually slows down your app right away. In addition, if you end up not using the resource, loading it wastes memory for no good purpose.
    http://developer.apple.com/library/ios/#documentation/iphone/conceptual/iphoneos programmingguide/PerformanceTuning/PerformanceTuning.html
    And, higher OS versionsare even worse with Bonjour/mDNSResponder, but might see this...
    http://support.apple.com/kb/ht3789

  • I'm not sure if im in the right room to ask but, i got a new job and my w-4 is online threw the adobe acrobat reader ans is filled out but it wont connect to the browser to get it submitted. what is wrong?

    I'm not sure if i am in the right room to ask but, i got a new job and my w-4 is online threw the adobe acrobat reader ans is filled out but it wont connect to the browser to get it submitted. what is wrong?@

    I doubt that the W-4 has a submit button. If you are using Reader XI (actually the topic of the Reader forum, not this one), you should be able to save it and then print and deliver. If it is set to be submitted by the browser, then it may be your Reader and the browser are not talking properly. If there is a generic URL that you can provide that has the W-4, we might be able to give you more info. A lot depends on what your particular form looks like. Hand carrying it should always be an option.

  • I was playing candy crush and I had too much problem with my bill your charge too much I want to know what is the problem with this game cost

    HELLO
    I was playing candy crush and I had too much problem with my bill your charge too much I want to know what is the problem with this game cost

    Take it up with iTunes Support - we are not Apple here, we are just users like you:
    http://www.apple.com/support/itunes/ww/
    Cheers,
    GB

  • Acrobat Reader 9 Crashes PC When Opening 2 Documents Simultaneously (2D Graphics Acceleration Relate

    Hey all,
    Weird issue. I noticed my Adobe Acrobat Reader 9 crashes when opening two PDF's simultaneously. The first one opens just fine. The second one, a new window opens, but there's only black inside the 2nd Reader window. It finally (after way too long) begins to show the document, and then I get a blue screen of death with a fault in nvlddmkm.sys, the nVidia display driver for my video card. It says it was unable to reset the display drivers, dumps the memory, and reboots. One interesting note is that if I close the "black" window before it blue screens, I can continue using the computer with no crash. It's only if I give it time to try to display.
    I already found the temporary fix for this, which is disabling 2D Graphics Acceleration in the Acrobat Reader (Edit -> Preferences -> Page Setup). Fortunately I'm on a fast computer, so this doesn't affect performance much, but it still obviously isn't ideal, and I'd like to see the problem resolved.
    I don't experience this problem with any other programs at the moment, so I'm thinking it's an issue with Adobe's product or possibly the nVidia drivers, but thought I should mention it and see if anyone has any other possible fixes where 2D Graphics Acceleration can remain enabled.
    Thanks all!

    I am having the exact same issue... it's so frustrating! Does anyone have a solution to this?
    Running CS4 on a Core i7 workstation w/ Win 7 64-bit, latest BIOS and video card drivers (ATI Radeon 4890). Acrobat is version 9.3 with all updates. It freezes for 30 seconds just as described, every single time you launch it.

  • I have a word document that I have put hyperlinks in and turned into a pdf.  When I email and receiver opens in iPad the document is blank.  When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content

    I have a word document that I have put hyperlinks in and turned into a pdf.  When I email and receiver opens in iPad the document is blank.  When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content turned into symbols.  What is going wrong?

    You select the printer properties and set the appropriate page size (I think there is a place to set it in PDF Maker too, but not sure). In the printer, this is equivalent to putting the proper paper in the printer.

  • I have added the Documents folder to the Dock, however when I save a document it doesn't appear in the Documents folder on the Dock, only the Documents folder in the Finder.  Is this a quirk, so am I doing something wrong?

    I like having my Documents folder on the Dock so I added the Documents folder from the Finder to the Dock.  When I save a document to the Documents folder, the saved document appears in the Documents folder from the Finder and not in the Documents folder on the Dock.  Why is this happening?  And how can I change this?

    newbieAK wrote:
    I opened the Finder, selected Documents, then right clicked and selected Add to Dock.
    Oooh. I never new that was there.

  • How can I remove the page number from the first page of the document that is the cover page?

    How can I remove the page number from the first page of the document that is the cover page?

    If you open the Pages panel, (Window>Pages) you will see thumbnails of your master pages and your document pages. In new documents, there is usually a master called A-Master and one called None. If you drag the thumbnail of the None master onto the thumbnail of a document page, it will apply that master to that page. Presumably, you have made your page numbers on A-Master, so this will usually do the trick. If you have elements on A-Master that you need on the first page, but just not the page number, you can duplicate A-Master (which, by default will give you B-Master, but you can change the names if you like) and remove the page number on the duplicate and apply that to the document page.
    It might also be worth noting that you can apply master pages in the fly-out of the Pages panel. Go to the fly-out triangle and go down to Apply Master to Pages…, then select a master to apply and the range of pages (1-8 will give you all 8, 1, 3, 5, 7 will be the odds, 1-3, 4, 6-8 if you want continuous ranges and individual pages).

  • Why do I not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task?

    We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
    1)  When myself and coworkers click on the pdf document in the library, we get the check out option as expected.  However when we click on the document
    link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option.  Why does this happen????? 
    2)  The same thing happens when we click on the document link in the workflow task email;   HOWEVER,  one of our co-workers does get the
    check out option when clicking on the link in the email task.  Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ????  We have compared our internet settings and adobe
    settings to ours and found no differences.
    We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI.  Some of us have Adobe Pro X and have the same issues.

    Hi,
    According to your post, my understanding is that you could not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task.
    I try to reproduce the issue, however, no matter when I click the pdf type document in the library or click on the pdf document link in the workflow task email, it download the pdf doucment and then I can open it.
    It will be better if you can descript how you
    get the check out option as expected when you click on the pdf document in the library.
    Then I upload a
    word type document to the library, no matter when I click the word type document in the library or click on the word document link in the workflow task email, I can open the word document directly and get the check out option as expected.
    I recommend to use the other type docuemts to check whether the check out option works.
    Thank you for your understanding.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • SharePoint 2013 - Document Set Capture Version History. Does each version captured for each document set keep a copy of all the document stored in the document set?

    Hi All,
    We have currently encountered an issue where even though version control is turned on in a document library, changes made to the metadata of a document set is not tracked in a version history. 
    We have found that in order to this a user will need to manually click on the capture version history button. 
    With this in mind, we are concerned about the impact of this on our storage. The question we have been trying to answer is whether each document set version:
    stores the change in metadata of the document set and a copy of all the documents stored in the document set
    stores the change in metadata of the document set and a reference to the documents stored in the document set (making use of SharePoint 2013's shredded storage)
    The reason we ask this is that if a document set version stores a copy of all the document stored in a document set, a change in one of the fields in the document set could result in the storage used to grow exponentially. e.g. if the document set contains
    documents totaling 30MB, and if we have 10 versions of the document set, we could take up 300 MB in the content database for just one document set.
    We have tried to some searching around Google but wasn't able to find any answers around this question. Would appreciate some assistance from anyone who has knowledge around how document set version history works. 
    Thanks in advance.
    John

    i had a long thing written out, but submit failed.  suffice to say it does "2".  it only stores the changes with pointers to the documents. 
    Christopher Webb | Microsoft Certified Master: SharePoint 2010 | Microsoft Certified Solutions Master: SharePoint Charter | Microsoft Certified Trainer| http://tealsk12.org Volunteer Teacher | http://christophermichaelwebb.com

  • When typing I will sometimes look at the document and find the curser moved and the typing is going on in a different area.  How do I stop that curser movement?

    When typing I will sometimes look at the document and find the curser moved.  The typing has been happening in the wrong place.  How do I stop the curser movement while typing?

    You're not the only person asking this question. You might want to read this post, which contains possible solutions, and references support documents:
    https://discussions.apple.com/thread/2322020?start=0&tstart=0
    Others have the same question as you. Post here if this information answered your question; post also if you have any additional questions!

  • How to display the RFQ Number as the Document Name in the E-Mail output.

    Hi All,
    I want the Document Name of the E-Mail Notification of RFQ to be the RFQ Number itself.
    For eg. RFQ E-Mail-60000015096.pdf
    How can this be configured?
    Thanks,
    Muneer.

    Hi,
    I have done the changes for PO. Its working fine.
    But its not working for RFQ.
    For eg, for PO its displaying as "PO E-Mail 45000xxxxx".
    But for RFQ its just displaying "RFQ E-Mail" - Number is not coming.
    I have used the text as "PO E-mail &EKKO-EBELN" for PO.
    And for RFQ, I'hv used "RFQ E-Mail &EKPO-ANFNR".
    Thanks,
    -Muneer.

Maybe you are looking for