Acticate / deactivate USB-Port during runtime passible?

I have a WinEC2013 target with two USB-ports. How can I disable during runtime the automatic detection, if a USB-device (mouse, Keyboard, USB-stick, ..) is connected?
Can I then re-enable it again, if needed in this LifeCycle?
Is it possible to disable for example only the automatic detection from a USB-stick, so that the mouse or Keyboard detection still works?
Can I do it only for one USB-port only, or if disabled, then for both of my available ports?
I expect, that this is possible via the registry. But who knows the keys and values?
Thanks for your help.

I found the relevant keys in the common.reg. I used for USB-mouse:
[HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default\1_2\Mouse]
   "DLL"="MOUHID.DLL"
For USB-keyboard:
[HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default\1_6\Keyboard]
   "DLL"="KBDHID.DLL"
For USB-stick:
[HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\Default\Default\8\Mass_Storage_Class]
   "DLL"="USBMSC.DLL"
When removing or adding this values in the registry on the target the devices will not work or start to work when connected. This changes works only when (re-)connecting the devices, not on the fly!

Similar Messages

Token and smart card reader are not detected on Mavericks if not plugged on a USB port during system boot

Well, both token and smart card reader are not detected on OS X 10.9 if not plugged on a USB port during system boot. So, if I am already working within the system and need to use my certificates I have to plug the token or smart card reader on a USB port and restart Mavericks.
Token is a GD Starsign and Smart Card Reader is a SCR3310 v2.
Thoughts?

SCS is a very good app, since I've read that Apple has discontinued support for PC/SC interfaces after the release of Mountain Lion.
(My previous installation was a Mavericks upgrade from Lion)
However, I don't know what and how to debug using Smart Card Services. Do you know any commands to use?
Apparently, the SC reader reports no issues: the LED is blinking blue when no smart card is present and becomes fixed blue when a smart card is inserted – according to the manuals, this shows that there is correct communication between the OS and the CCID reader.
I don't know what to do; I'm beginning to hypothesize it's a digital signer issue. In fact, my smart card only supports one application called File Protector (by Actalis) to officially sign digital documents. This application seems to have major difficulties in identifying the miniLector EVO.
The generic and ambiguous internal error comes when I try to manually identify the peripheral.
Athena CNS is one of the Italian smart cards and is automatically recognized and configured (so it's correct – no doubts about this), while "ACS ACR 38U-CCID 00 00" seems to be the real name of the miniLector.
(I'm assuming this because System Information also returns that the real manufacturer is ACS... bit4id is a re-brander)
However, when I click on it and then tap OK, it returns internal error.
As first attempt, I would try to completely erase&clean File Protector files to try a reinstall. Then, if this still doesn't work, I'd debug using the terminal.
So:
- Do you know any applications to 100% clean files created by an installer?
- Do you have in mind any solutions that I might have forgotten?
Thanks in advance from an OS X fan!

Deactivate BADI's during runtime

Hello,
Is it possible to deactivate BADI during runtime of a program.
   I want BADI to be deactivated only for current session i.e when I call transaction from my program.
Thanking you,
Regards,
satya

Hello Prabhu,
   Thanks for that and sorry for late reply.
    But I have to execute commit statement in between. If I execute commit statment BADIs will be deactivated for other users who are executing transaction in the same time.
I do not want this to happen. Could you please suggest me any other way is possible.
Once again thankyou very much for quick response.
Regards,
satya

DVI to ADC Adapter + Mini DVI to DVI Adapter = usb ports don't work?

I have a 23" Cinema with the ADC plug. I've been using it with the DVI to ADC adapter for many years, though I did not use any of the monitor's usb ports during this time. I recently bought a new Macbook, so now I have am combining a Mini DVI to DVI adapter with the DVI to ADC adapter. The display works fine, but now I find the usb ports on the monitor do not work. I've checked all the pins involved and they are all straight and look normal.
Does this have anything to do with the double adapter situation, or could it just be that the monitor's usb ports are aging and haven't been used in a long time? Or is it possible these ports do not support usb 2.0 devices?

Thank you Malcolm.
It's true I cannot adjust the display's brightness using the buttons on the monitor. But I can put the Macbook to sleep, both when the adapter's usb cable is plugged in and when it's not.
So if the usb circuitry has gone bad, will this cause me any other problems, or can I just ignore it? Right now I am trying to choose an external hard drive to buy, so I'm taking stock of my available ports. I don't think I'd put a big hard drive on a usb 1.1 port anyways.

Itunes Freezes during Sync on 3G & 3GS with Vista 64 & 7-64 all USB ports

To start. I originally had an iPhone 3G over a year ago on this desktop running Windows Vista 64Bit. My phone was able to sync with the PC for about a month and stopped being able to sync. I received many error numbers and put support tickets in with no avail. I then upgraded to an iPhone 3GS. Still under Windows Vista 64Bit and could not Sync my phone. It consistantly froze during the sync process. I tried all USB ports on my PC. People said to try restoring your iPhone and iTunes. I tried that and then got stuck on my restore. I had a broken phone until I was able to sync with my laptop.
I now have the same desktop Acer AM3641-EQ8200A but I am running Windows 7 Ultimate 64bit. I have always had the latest iTunes version, and tried 32 bit and 64 bit versions of iTunes. I still cannot successfully sync my iPhone. If it sits there long enough it will freeze up, start to freeze my computer etc. I decided to try again last night after I got a new USB cord and had the same issue.
In addition, my girlfriends iPod will not sync to the desktop either.
I have been stuck doing syncs on my Netbook for over a year now. Optimization of 3,000+ photos is horrific on it, but it works.
People say to get an external USB that is self powered. Why should I have to do this and chance frying my PC?
The deal is this, the phones won't sync with the desktop but will sync with my netbook also running windows 7 ultimate. All USB drivers are up to date on both.
I have tried Reformatting and Installing Windows. Reinstalling itunes. Updating all drivers. Tried different versions of iTunes. I first called Apple Retail, they had no answer. I wrote apple a lengthy letter with all the Error codes, they said they would call me even though my warranty over the phone support was expired. Never got a call back after they heard my problem.
What can I do to rectify this? I am not the only one out there.

UPDATE:
After putting a USB 2 card in my mac, all worked properly. The problem seems to be using USB 1.1.
This is really tragic because:
+ many Macs don't have USB 2,
+ it is very difficult to find out out if USB 2 exists on your computer (why are no USB 1 or 2 details spelled out in system profiler ?),
+ there are no warnings as to the sort of issues that would be coming up with USB 1.1 (yes I know the specs clearly says USB 2, but it looks like it was working at first),
+ there are no spelled warning by the system (after all, the iTune, iPod combination could detect easily that the incorrect USB standard is being used and warn the user),
+ there does not seem to be specific advantages to use USB 2 (like speed) as the syncing peaked at 6MB/s, a speed achievable with USB 1.1
Come on Apple you can do better than this !

USB ports stop recognizing external or flash drives during back up, dv7 2185 laptop

HP Pavilion dv 7 2185 dx, Windows 7 64 bit
After one of the updates over the last 7 months my computer lost the ability to complete a systems back up. The back up will complete about 25 percent (using external hard drive or flash drive, any of the 3 USB ports) and then stop. The My computer page will then not show free space info. for the drives like when it did when they were first plugged in. It's like the drive became unrecognized during the back up.

I AM HAVING THE SAME PROBLEM WITH THE SAME MODEL. I GOT THE SERVICE
MANUAL AND I'M THINKING TO OPEN IT AND SEE IF THERE'S SOME PHYSICAL BAD CONNECTION
INSIDE. BUT LIKE YOU SAID. IT'S ONLY THREE MONTHS OLD.!!! I DON'T WANT TO RUIN THE WARRANTEE.
BUT THIS IS VERY FRUSTATING. I WANDER IF TOSHIBA DOES THIS ON PURPUSE.!!! KEEP IN TOUCH AND
IF YOU NEED THE SERVICE MANUAL CONTACT ME AT [email protected]
THANK YOU.!!!!

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

Provide USB port power during Macbook Pro Sleep mode

My old Macbook used to go to sleep, with lid closed, and charge my phone via USB cable.
With my i7 2010 15" Macbook pro however, I cannot see how to configure this same feature. Basically when the lid closes, the unit goes to sleep, including the USB ports.
In order to charge my phone, I am forced to leave the computer on.
This seems like a giant step backward for a traveler like myself, one of the main reasons I made the investment in the new Macbook Pro was for the great new battery life.

I have the same problem. This was working, but it seems that after the last security update all USB ports are turned off completely, so my iPhone and iPad (both of which I leave connected to the USB ports) do not get charged. This is a big deal with my iPhone.
Is there a configuration parameter on my MBP I should check?
Thanks!

WRT610N USB port locks up during file copy

Brand new wrt610n works like a charm except for the USB port. We bought the router specifically for that feature and we got a small USB drive to attach to it. Problem is, when backing up a workstation using just file copy of no more than 5G of data, the USB port hangs up. Can't get to it via the management we interface storage tab. The rest of the router continues to function properly. The USB light stays on. Disconnecting the drive from the router and reconnecting causes the USB light to go off but it doesn't come back on. A router reset corrects the locked USB port. The drive functions properly connected to a workstation or our DVR.
Is this broken hardware or broken software?

Checked the firmware for updates but nothing on this problem. The drive is a WD 750g USB 2.0. Tech support wants me to reflash the router just incase the firmware was corrupted.
If that doesn't work, I suppose I could reformat the drive with the Linksys router management software. I didn't have to do that because it recognized the drive right out of the box as FAT2. This drive works fine attached to one fo the PCs.
./d

SCCM 2012 SP1 USB Ports are dying during WindowsPE/NT

Greetings,
I have been trying to image a HP Z600. I hit F12 to start the network boot, it goes through loads the files, sees the server all that works just fine. Then once the files finish loading the Windows logo flashes on the screen. At this point the keyboard and
the mouse/all USB ports on the machine die.
So I am stuck, we have a password typed in and since I have no keyboard or mouse I have no ability to type anything. We have tested on other types of Desktops and Laptop and they all seem to work fine. But with the HP Z600s we get nothing.
If anyone can help, Thank you!

Hi there, having the exact same problem but with HP dc5800s, Dell Optiplex 745s and 755s. This thread http://www.edugeek.net/forums/o-s-deployment/114379-winpe-4-keyboard-mouse-issues.html gets *close* to a solution but never really delivers.
Did you ever come up with a solution?
Thanks.

IPhone 6 won't play with Kenwood stereo USB port. Help !!

I have a Kenwood KDC-BT743U Stereo in my car, which has a front panel USB port. I've been able to connect my iPhone 4S and play music from my iTunes catalog as well as stream music from Pandora, Soundcloud, Tune In Radio, Mixcloud et al, without any problems until yesterday.....
Now that I've upgraded my phone to a iPhone 6 and when I connect it to the stereo via the USB port, it doesnt play at all. After about 2 minutes of trying to connect , I recieve a 'USB Error" . As I stated, I've had no problems with my iPhone 4S, which I've used with this same stereo deck for the last two years without any problem what so ever.
I'm looking for some guidance on next steps to take in order to fix the problem? Did Apple change the spec in some sort of way? Do I need to go to Kenwood for a firmware update (their website provides no information about iPhone 6 compatability with any of their stereo's which is very odd to me) ?
Please help, my life in the car during long commutes is just not the same......

Possible Solution:
1. Go to Settings > General
2. Go to Restrictions
3. Enter Passcode (possibly x2)
4. Enable Restrictions
5 Disallow CarPlay
6. Reset Network Settings (Not 100% sure if this step is needed)
7. Have at least 1 song in Apple Music App
8. Have Iphone at Home Screen
9. Connect Apple Original Cable
10. That 1 Song should start playing
11. Open Prefered Streaming App and hit Play
Carplay negatively affects USB connection with Non-Carplay USB Audio Receivers.
I have the Iphone 6 with 8.3 iOS connected to Pioneer avh-41000dvd car stereo and the above solution fixed USB audio issues, including Error code 22-65.
If you are having issues upon reconnect, disconnect and bring Iphone to home screen and reconnect.

USB ports not working in Windows-7 on MacBook Pro Retina Late 2013 after Bootcamp installation

1) INSTALLATION
Using Bootcamp (v. 5.1.1, OS X Mavericks) in combination with an original Microsoft installation DVD disc using an external optical CD/DVD drive. Note, the installation is NOT from an ISO image. In the Bootcamp setup window only the lower two of the three setup options are clicked, namely a) to download Windows-7 drivers to a USB stick, and b) to partition the harddrive and then to install Windows.
2) PROBLEM
After the initial Windows-7 installation no devices attached to the USB ports can be found under Windows-7. The ports are dead. Also the WLAN did not work, so no internet connection was possible.
3) CAUSE
The problem is caused when you use a USB 3.0 stick as destination for the Bootcamp driver downloads. It seems that Windows-7 cannot recognize the USB 3.0 stick properly during the Bootcamp/Windows installation process, thus failing to do perform a proper installation of the Windows-7 drivers.
4) SOLUTION
Use a USB 2.0 stick and everything will work perfectly.
Follow these steps in order:
1) Connect your external DVD drive to a USB port and insert the Windows installation disc
2) Start the Bootcamp utility
3) In Bootcamp, remove the failed Windows-7 installation and partition
4) In Bootcamp, redo the entire Bootcamp process, but this time using a USB 2.0 stick
5) Follow all further steps in Bootcamp and later in the Windows-7 installation process
6) At the end of the installation procedures you will be asked to confirm the installation of all Bootcamp/Windows drivers.
7) Bootcamp installs all the drivers and your Windows-7 installation will work perfectly.

Ok, where is this Intel driver? There is no such thing "program manager" so I am guessing you mean the Programs and features control panel, but on my machine that whole window is blank after a clean install. I still cannot get the USB ports to activate. Two fresh installs and several different USB sticks later and no luck. Should I just give up and go to Windows 8.1? I really need Windows 7 to work if at all possible. Other devices shows one USB controller without driver software so I suppose that's the culprit. There are other USB devices installed under the USB section of Device Manager, but they apparently have nothing to do with the USB ports themselves, just devices like the trackpad etc. I've spent two hours on this so far and it's getting out of control. Why doesn't this work with generic USB drivers?

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

USB Ports on 3 month old Satellite C655-S5049 do not work-even after Recovery to "Out-of-Box" state

Hello - Hoping someone can help with another suggestion- it doesn't look good.
Both USB ports on my wife's 3 month old Satellite C655-S5049 are non-functional with any USB device. Flash drives, wireless mouse, and external hard drive (powered) that all work on all of my other computers, do not work in either of this laptop's USB ports.
This problem seems to have developed gradually, and became noticeable previously as non-responsiveness in the wireless mouse, which gradually became a concern, with the computer appearing to freeze or lock-up - probably because of the number of times the mouse was clicked on shortcuts and executables before something happened.
The ports are now completely "dead"- no recognition of anything inserted once the computer is up and running.
There appears to be a thermal component involved, since I was able to get the devices recognized and working for up to a minute when booting the computer with the devices in the ports after it had been off for several hours after I did the default state recovery. The flash drive and mouse were recognized, drivers loaded message, but they then went to "unplugged" before I could get the cursor moving. I was able to access the flash drive, since I did it as soon as the driver loaded, but then it disappeared ("un-plugged" itself in the driver loaded message box). I can also get them recognized from this COLD boot state when I immediately plug them in once Windows 7 (64) loads, but they quickly disappear. If I wait a few minutes before re-booting, they flash during the Windows boot, but drop-out before it completes. If I wait 3-4 hours to re-boot, they flash (are recognized) for about a minute (Windows completely loads), but then they drop out.
I tried all of the suggestions on this board (and others) before doing a Recovery to Factory Default state. I have tried it with the original version 1.20 Bios, and with the version 1.50 Bios update. All driver updates have been downloaded and installed. The laptop does occasionally lock-up at the Toshiba screen during boot, and is verrrry slow in some operations (2 hours to do the recovery discs). The only other noticeable problem (at this time) is an occasional drop-out of wireless (Atheros AR9285) connectivity, which I have been blaming on the router since it is sporadic and infrequent (not consistent with the thermal argument). These problems are all after the Factory Default State recovery operation, so my assumption is that they are hardware based.
Any suggestions for a solution? This is a standard spec Satellite C655-S5049 that I was considering adding another 2GB memory to, but now I am unsure of its' future. A laptop cooler that runs from a USB port seems counter-productive.
I am technically capable, so you can be much briefer in your response than I have been in trying to fully detail the problems. This isn't the NVidia chip, but it does bring back memories of laptops past.
Thanks for any help,
G

I AM HAVING THE SAME PROBLEM WITH THE SAME MODEL. I GOT THE SERVICE
MANUAL AND I'M THINKING TO OPEN IT AND SEE IF THERE'S SOME PHYSICAL BAD CONNECTION
INSIDE. BUT LIKE YOU SAID. IT'S ONLY THREE MONTHS OLD.!!! I DON'T WANT TO RUIN THE WARRANTEE.
BUT THIS IS VERY FRUSTATING. I WANDER IF TOSHIBA DOES THIS ON PURPUSE.!!! KEEP IN TOUCH AND
IF YOU NEED THE SERVICE MANUAL CONTACT ME AT [email protected]
THANK YOU.!!!!

The USB port on my 4th generation Airport Extreme does not recognize any peripheral devices whatsoever. In other words, it does not function at all. What can I do?

I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.

Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck.

Acticate / deactivate USB-Port during runtime passible?

Similar Messages

Maybe you are looking for