ACTION dialog toggle

i have created new actions and groups, but i can not toggle the DIALOG box on and off... nothing happens. i have reloaded my action groups, restarted the application and reset my photoshop CC prefernce file. are there suggestions to fix this?

That explanation seems a bit hard to follow.
If I understand correctly, you could just duplicate the Action by dragging it on the »Create new action«-button at the lower end of the Actions Panel.
Then record the opacity changes into a separate new Action; after that just drag those individual steps into their intended positions in the duplicate Action in the Actions Panel.

Similar Messages

How do i add a download action for dxf files. firefox assumes its a text file and just opens it with no download action dialog box

I want to add a download action for dxf files so they open in Autodesk trueview. The steps described here (http://support.mozilla.com/en-US/kb/Managing%20file%20types#w_adding-download-actions) say to click on a link for the filetype you want to add an action to but firefox thinks the dxf is a text file and just opens it in a new tab with no download action dialog box.

Use the right-click context menu and choose "Save Link As" or hold down the alt key and left-click the link.

Notifying other checkboxes to toggle the state within an Action

Hello,
I created an action that toggles visibility of one dialog. There is a JCheckBoxItem in the menu and JToogleButton on the toolbar. Both with this action deployed (with setAction() method).
When user click on the menu item checkbox it do not toggle the checkbox on the toobar and vice versa. I need some mechanism to "connect" the checkboxes with same action to set their values synchronously.
What mechanisms or interfaces to do this?

toggleButton.setModel(checkBoxItem.getModel());

How to know which Action has been done by a Dialog in ControlsFX?

Hello!
I am using ControlsFX for the "Dialog" class. This class lets you build a dialog with "Node" Content.
I set the content to a GridPane and and had wanted to set up a custom Action.
There are premade Actions like "OK" "CANCEL "YES" "NO" "CLOSE" so I tried using "OK" and it worked by saving all of the info in the TextFields which were set in the GridPane
However when I tried "CLOSE" "NO" or "CANCEL" it also saved the data within the TextFields... SO I'm confused, what Actions are exactly going on, and I figured I would just make an if statement saying {code} if(Dialog.getAction(Action.OK) == true){code} but it never worked.
Thoughts on howe to do the actions? I tried to make a custom action at first, but the premades "workjed" but not really.. :(?

Thanks!
This wasn't there when I first looked at it, or I was looking at another location of the api, I will make sure to look at this one now :D.
I basically did Action action = Dialog.show().
then did if (action.equals(Dialog.Actions.OK))
//code
}So it works :).
I like the custom action too, I'm interested in the example Action response = Dialogs.create()
      .title("You do want dialogs right?")
      .masthead("Just Checkin'")
      .message( "I was a bit worried that you might not want them, so I wanted to double check.")
      .showConfirm();I from the api it says that .create() is static Dialogs Type, so I'm curious how that's used as the Action in this case?
Thanks again :)

Disable menubar and location from popup dialog in new browser window

How to hide the toolbar, menubar, location and status for the popup window (not inline, but new browser window style) using ADF 11g?
Just like HTML javascript:
window.open ('page.jsp', 'newwindow', 'height=100, width=400, top=0, left=0, toolbar=no, menubar=no, scrollbars=no, resizable=no,location=no, status=no')In ADF 11g, I have a jspx refered by a taskflow action with "dialog:" prefix, and I call it from a button like this:
<af:commandToolbarButton text="Add"
id="ctbAdd"
action="dialog:create"
useWindow="true"
windowEmbedStyle="window"
windowModalityType="applicationModal"
windowHeight="400"
windowWidth="600"
/>How to control the toolbar, menubar, location and status for the popup window?
Thanks in advanced,
Samson Fu

I tried it but not success. My code as below:
    public void handleAddLaunch(LaunchEvent launchEvent) {
        launchEvent.getWindowProperties().put("toolbar", "no");
        launchEvent.getWindowProperties().put("menubar", "no");
        launchEvent.getWindowProperties().put("scrollbars", "no");
        launchEvent.getWindowProperties().put("resizable", "no");
        launchEvent.getWindowProperties().put("location", "no");
        launchEvent.getWindowProperties().put("status", "no");The popup windows contains all the toolbar, menubar, location...
Is there any example or reference for the keys and values for getWindowProperties()?
Regards,
Samson Fu

Problem with a Scott Kelby action. Help!

In Scott Kelby's "Adobe Photoshop Lightroom Book for Digital Photographers" he describes a process to automate sharpening in Photoshop, (chapter 5, page 218). It involves creating an "Action" in Photoshop that can automatically sharpen a folder of photos without any intervention on the user's part that can be automatically run from Lightroom. I'm running on a MacBook Pro, OS 10.4.11, Lightroom 2.3, Photoshop CS2.
The problem is that the action hangs when saving a photo. When the action reaches the step to save a photo, a "JPEG Options" box opens up and waits for you to click on the "OK" button. This hardly makes the action automatic. I notice that this only happens to photos that have not been opened in Photoshop previously, (which is always in my case).
Here are the Photoshop steps described by Scott (minus any superfluous stuff):
Step 1: Open a photo.
Step 2: Go to the Window menu and choose Actions. Click on the Create New Action icon at the bottom of the palette. In the New Action dialog box name your action and click on the Record button.
Step 3: Go under the Filter menu, under Sharpen, and choose Unsharp Mask. When the Unsharp Mask dialog appears enter 120% for Amount, 1.0 for Radius, and 3 for Threshold, then click on OK.
Step 4: Now go under the Edit menu and choose Fade Unsharp Mask. This brings up the Fade dialog box. From the Mode pop-up menu choose Luminosity.
Step 5: Now you can press Command-S (PC:Ctrl-S) to save your photo, then Command-W (PC: Ctrl-W) to close your photo. Since it's been saved and closed, go back to the Actions palette and click on the square Stop Recording button at the bottom left of the palette.
The rest of the steps involve creating a Droplet to put into Lightroom but is irrelevant to my problem.
Like I said, when I run this action it hangs when saving a photo. A "JPEG Options" dialog box opens and waits for you to click on "OK" Again this only happens on photos that have not been previously opened in Photoshop.
Any hints as to what is happening and how I can fix it?

You already have a rendered file at this point, so this metadata is completely useless. Lightroom for some reason includes all develop settings in every exported file.
Here is some more info
http://www.flickr.com/groups/adobe_lightroom/discuss/72157607023379578/
http://www.lightroomqueen.com/blog/2009/04/17/why-cant-cs2-save-as-jpeg-when-local-adjustm ents-were-used-in-lightroom/
The last one has the metadata-wrangler plugin do basically what I told you to do by hand inside Photoshop.

How to launch photoshop action?

I'm writing a Bridge CS3 script to generate a web gallery. The user selects some files and starts the script through a context menu item. The script iterates through the selection list a couple of times, writes files, etc.
As the final step, I need to start Photoshop CS3 and run an action on the set of selected files--as if I had picked Tools/Photoshop/Batch... from the Bridge menus but with the action specified so the user does not have to go through the action dialog in Photoshop. After starting the action, the Bridge script is complete and can quit while Photoshop does its batch processing.
The Photoshop action contains mostly "fit image..." and sharpening steps. It also contains some simple scripts, mostly simple "save as" types of operations.
I'm uncertain how to do this. Is this where BridgeTalk must be used? Can anyone direct me to a sample script that does something simple like this?
Is there any problem with having scripts within the action? Some messages I've seen suggest there is, but I'm not certain I'm interpreting them correctly, or whether they apply to CS3.
Thanks.
Guy

[email protected] wrote:
> I'm uncertain how to do this. Is this where BridgeTalk must be used?
Yes. You would have some Bridge JS call some PS JS which would, in turn, call
your Batch/Action.
> Can anyone direct me to a sample script that does something simple like this?
You might want to take a look at the Bridge SDK, if you haven't already. There
are several examples using BridgeTalk. And also look at the code in Common
Files/Adobe/Startup Scripts CS3 to see how Adobe implemented the Bridge
Tools->Photoshop functionality. It's a bit difficult to follow in places but
what you really want to look at is the photoshop10.runActionCommand function in
photoshop-10.jsx. It's one way of calling PS actions from Bridge and it's also
what I use in my code.
>
> Is there any problem with having scripts within the action?
CS3 has apparently addressed this issue but I can't say from personal experience
that it works. However, this was not possible at all in CS2 unless you went to
really extreme measures.
-X
for photoshop scripting solutions of all sorts
contact: [email protected]

Status of suceessfull execution of an action definition

Hi
We have configured in CRM 4.0 for Sales Order Transaction that when a new order is created , Order Acknowledgment an email output format has to be automatically triggered to the concerned partner through action profile.In the action profile -- the processing mode of this action definition is set as 'When saving the document" & the icon corresponding to this action text is set to green after successful execution. This can be view in Action Tab of Sales Order transaction.
In the same way , Order Status -- action definition is also schedule in action dialog box which can be triggered by manually, at the end after successful execution the icon is set to green.This can also be view in Action Tab of Sales Order transaction.
Now how through a customized report, how to track the orders in which these action definitions are successfully completed.
Though application log is available but not able to fetch the records corresponding to the Order.
Pls advice,
Thanks & Regards
Deb

Hi
Thanks a lot.
Basically the table PPFTTRIGG contains the records related to parent Order.
Using the records we can fetch the status of execution as per the requirement.
Thanks & Regards
Deb

Link action to Bookmark in Acrobat 9 Pro?

Is it possible to have a Link (created with the link tool) refer to a named Bookmark within the the same document? There is no submenu item for that. Is there a Javascript I can put in the Link Actions dialog? Other solutions?
The problem I'm having is when I replace a page in a PDF file, all the existing links and bookmarks are preserved (including location and zoom level) EXCEPT that the layer visibility action is nonfunctioning (it's still listed in the Actions list though). There are lots of links, amny of which go to the same bookmarks, so I thought it would be great if all I had to do was reset the layer visibility for 100 bookmarks rather than the 500 links!
Thanks,
fss

I need a Link to a Bookmark because when I replace a page in a PDF in Pro 9, the links and bookmarks almost work, except that the Layer Visibility is lost, and setting the Layer Visibility for 100 bookmarks is a lot better than 500+!
The procedure I'm using is:
Create document in Illustrator CS4 Mac
Export as PDF w/editing capabilities and layers
Add Links and Bookmarks in Acrobat Pro 9 - document done for this cycle
Update original Illustrator file in Illustrator (errors, changes, adds, etc) and save as replacement PDF
In Acrobat, Replace page of current PDF with the replacement PDF
Result: links and Bookmarks retained, except for Layer Visibility.
If I could find a Javascrpt to go to to a Bookmark, to put in the Links Action box, that would be great. Or any other solution, like Adobe should add this feature.
Thanks

How to get the cancel event of inlineDocument-style dialog.

Hi experts,
My customer has a question about ADF dialog framework.
When we open new inlineDocument-style dialog from af:commandButtton, how can we get dialog cancel event?
[Sample code]
<af:commandButton id="cb2" action="dialog:test"
windowModalityType="modeless"
text="dialog:test" windowHeight="500"
windowWidth="800"
windowEmbedStyle="inlineDocument"
useWindow="true"/>
When we use af:popup, it has popupCanceledlListener attribute so that we can handle the situation where users click close button or Esc button.
Does dialog have a similar feature?
We can set a returnListener for dialog, but it doesn't work in case users click close button.
Regards,
Atsushi

is this what you are looking for [url http://www.oracle.com/technetwork/developer-tools/adf/learnmore/77-ok-cancel-support-in-dialog-351871.pdf]Handling the af:dialog Ok and CANCEL buttons
and [url https://blogs.oracle.com/jdevotnharvest/entry/strategies_for_controlling_the_af]Strategies for controlling the af:popup close event
Edited by: Mohammad Jabr on Apr 27, 2012 11:34 AM

Dialog with a lot of XML content takes minutes to open in IE7.

Good day to all.
This is my first week with JDeveloper ADF, so, please, be forgiving. I have a page, which has this code
<af:commandButton text="Show XML" id="cl2"
action="dialog:showxml" useWindow="true"
windowHeight="200" windowWidth="500"
partialSubmit="true">
When clicked, this one is invoked:
<f:verbatim>
<jsp:include page="xml_original.xml"/>
</f:verbatim>
The xml file is 500KB. The dialog pops up very fast in Firefox, but in IE7 it takes minutes to open. When opening it in the page, without the dialog, the performance is fast.
Please help.
Thank you.
Edited by: user608849 on Sep 10, 2009 10:21 AM

Does it open fast when you load the xml file manually in IE (without using it from the ADF / dialog)?
something like http://<host>:<port>/..../xml_original.xml ?
-Arun

Dialog framework and commandButton doesn't display in new window

I'm using a af:commandButton to launch a dialog in a new windows with no luck
I'm using EA1 and ADF EA 19, my command button is
<af:commandButton text="dialogo"
launchListener="#{controladorLink.launch}"
useWindow="true"
returnListener="#{controladorLink.regreso}"
partialSubmit="true"
action="#{controladorLink.accion}"
actionListener="#{controladorLink.actionListener}"
windowHeight="200" windowWidth="300">
Am I doing something wrong? According to the Dialog Framework documentation you need to set an "useDialog" attribute, but it doesn't exists in commandButton, do I need to use commandLink necessarily?
Thanks

Did you take care of these requirements?
The value bound to the action should return a string of the form "dialog:.....".
Eg: <af:commandButton text="Show More Information"
action="dialog:showDetail"/>
And there is a navigation-case that needs to be added to the faces-config.
<navigation-rule>
<from-view-id>/*</from-view-id>
<navigation-case>
<from-outcome>dialog:showDetail</from-outcome>
<to-view-id>/showDetail.jspx</to-view-id>
</navigation-case>
</navigation-rule>
Hope this helps.
Thanks,
Balaji

No actions

I am new to Flash 8 but having trouble with actions. When I
create a button
symbol it won't let me add the get url those actions are
greyed out so I
can't use them. But if I drag a premade button from the
library of buttons
that come with flash it will give me that option?
I want to create an invisible button that goes to a url? In
the Lynda
tutorial I am taking it tells you to create the button by
using the
rectangle tool then convert it to a symbol button then double
click on it to
bring up the states then drag the keyframe over to the hit
state then add
the action but it doesn't work?

Sounds like - you're doing everything right.
Just check and make sure that when you create the symbol
you're specifying 'button' from the 3 choices (movieclip, button,
graphic). Then do what you did from the tutorial - drag the
keyframe over to the 'hit state' leaving the other 3 states blank.
Then when you pull it onto the stage (it should appear as a
transparent light blue 'turquoise') box (or whatever shape you
first created it from).
Then select this instance (the turquoise box) on the stage
and in the property inspector make sure the pull down tab is set to
'button' (it should be as it's the default). Also, make sure (also,
in the property inspector) it is set to 'track as button'.
If all of that is a go > then while the instance is
selected > open the actions dialog box. Sounds like you're going
to want the 'script assist' button selected > select getURL and
you're good to go.

Can't change the document title when the browser is opened in dialog mode

Hello experts,
I'm working on a solution which involves opening up another .jspx page in dialog mode. I need to change the title of the dialog browser window dynamically when the user performs a specific action on the dialog page.
Unfortunately, I can't get this to work. I have tried using JavaScript and had no luck. I tested this technique on a non-dialog page and it works fine. Please help.
Here is the markup code for launching the dialog page:
<af:activeCommandToolbarButton id="actbPreview"
icon="/graphics/previewscreen_enabled.gif";
text="Preview"
action="dialog:weCreate"
useWindow="true"
windowHeight="620"
windowWidth="1120"
disabled="#{empty bindings.MapElemUnqId.inputValue}"
launchListener="#{backing_weQuery.launchPreviewerListener}"
binding="#{backing_weQuery.actbPreview}"
returnListener="#{backing_weQuery.returnPreviewerListener}"
clientComponent="true"
windowModalityType="applicationModal"
windowEmbedStyle="window"
disabledIcon="/graphics/previewscreen_disabled.gif";/>
On the dialog page, here is the markup and javascript for setting the browser window title:
<af:commandButton text="title" id="cb10">
<af:clientListener method="setWindowTitle"
type="action"/>
</af:commandButton>
function setWindowTitle(actionEvent)
actionEvent.cancel();
var doc = AdfPage.PAGE.findComponent("d1");
doc.setTitle("TEST");
alert("Title="+doc.getTitle());
}

Thanks for your response.
I tried that and I could not get it to work. Even though I can set pageFlowScope.pageTitle dynamically, the browser window title does not refresh (I tried to refresh via PPR and full post back).
here is my code:
public void setPageTitle(ActionEvent actionEvent)
RequestContext requestContext = RequestContext.getCurrentInstance();
Map pfs = requestContext.getPageFlowScope();
pfs.put("pageTitle","TEST 2");
RequestContext.getCurrentInstance().addPartialTarget(this.document);
public void setPageTitle(ActionEvent actionEvent)
RequestContext requestContext = RequestContext.getCurrentInstance();
Map pfs = requestContext.getPageFlowScope();
pfs.put("pageTitle","TEST 2");
FacesContext context = FacesContext.getCurrentInstance();
String currentView = context.getViewRoot().getViewId();
ViewHandler vh = context.getApplication().getViewHandler();
UIViewRoot x = vh.createView(context, currentView);
x.setViewId(currentView);
context.setViewRoot(x);
}

Howto create non-modal dialogs using ADF Faces

I would like to use Dialogs in a non-modal manner.
Trying to use
<af:commandLink useWindow="true" action="dialog:infoPopup" blocking="false">
<af:setActionListener from="#{row.xyId}" to="#{infoPopup.currentId}" />
</af:commandLink>
doesn't work as expected. I'll get the dialog, but I can't use the page behind it.
Alternatively I tried to show the page using Javascript opening the pageInfo.faces, but here I have an order problem. The onClick event is processed first and the #{infoPopup.currentId} will be populated after rendering the JSF page. But I want to show infos depending on the xyId.
Is there any other way to open windows/dialogs?
Thanks in advance
Stephan

The "blocking" attribute basically just blocks you from clicking the commandLink or commandButton twice (or more) before the first click has been processed by the server and a response has been received.
It is a very good util for avoiding those unwanted IndexOutOfBoundsExcepions when a user hits many buttons thus sending multiple requests to the server.
By the way, I'd like to see the answer to the non-modal dialog window, because we have a need for them, too.
Kind regards,
dj

ACTION dialog toggle

Similar Messages

Maybe you are looking for