Action Dropdown failure

The action drop down does not function in an interactive report. It works on an existing page in the application. The page in question is branched to from a another page. When I copy the page that works and branch to it, the action drop down does not work. If I branch to the working page, the action drop down works. Each time the only things that change on the branching page are the page being branched to and two page variables.

I believe I know what your problem is. Perhaps not but it sounds familiar!
If your Interactive Report is conditional based on a specific request, the Actions menu, column sorting and anything else that uses AJAX breaks. This is because all the functionality in the report is still dependant on that condition, and all of the standard javascript calls do not set the REQUEST each time.
If this is the case and this is the issue you're facing, I logged a bug for that already via Oracle Support (14483344). There is no workaround for this - you simply cannot use the extra functionality in Interactive Reports conditionally based on the REQUEST parameter.
Hope this helps.
Kind Regards, Pete

Similar Messages

  • Stopping CVI Action on Failure

    I was hoping you could lend a hand. I'm trying to run a group of tests, lets say 50 related tests in a subsequence, each using a CVI adapter. Each of these tests requires a DLL function for when I "specify module." Rather then have 50 DLL functions, which could be very tedious, we thought we may use a CVI action (1 DLL function) which stores the results of each measurement in an array and do 50 single numeric limit tests. This presents a problem because if test 1 fails, the other 49 tests will run before we ever know that test 1 fails - this could take a lot of time, or damage the unit under test.
    So, what I'm trying to figure out… Is there a way for us to have a bunch of tests in a single DLL function that will allow us to recognize and handle a failure immediately? Maybe trigger the TestStand compare and data sheet write from CVI instead of returning all the results to TestStand?
    Thanks for any hints.

    Although creating 50 steps is going to be more tedious, it will be a much more flexible solution, especially with what you are trying to accomplish.  The only way to make a single DLL entry point AND check limits as you go along is to check limits within your code module.  I would not recommend this solution, as it is much less flexible than using TestStand to do these functions.
    It is always best to keep your tests as simple as possible, and leave the limit testing, etc.. to TestStand for maximum flexibility and reusability.  If any of your function calls are very similar, you may want to use fewer DLL entry points, and pass parameters.
    If you must use a single function and need TestStand data, you could pass the Sequence Context into your DLL, and access the test limits, and use the TestStand API as you test.  I would not recommend this solution, but it would allow you to know ahead of time which tests will fail.
    Allen P.
    NI

  • How can I clear the GL CS Actions dropdown menu?

    I know I shouldn't even be using GoLive now that Adobe no longer supports it, but it's all I know (and love) and it's a fabulous app for those of us who are visually oriented rather than code-oriented. I use both CS and CS2, but some sites I've done are in CS and I haven't had the time (or guts) to move the larger sites over to CS2 (I've found that sometimes the translation from CS to CS2 isn't so good). That said, I am having a problem with the Actions menu in CS...it seems that, when I click the dropdown arrow to choose an action, the dropdown menu is populated with the same item over and over and over again. I seem to recall that there's a way to clear and reset this menu. Does anyone recall how to do this? I am on a Mac, Leopard 10.5.8. (Yes, both versions of GL are quirky under Leopard, but I have to deal with it!)

    There is a little circle button in the upper right corner.  Under that button you can hit reset actions.
    SH

  • Quiz failure, how to stop the project from continuing

    If the user fails the quiz I don't want them to be able to proceed b/c for the ones that passed I have created a certificate. I have my quiz settings under the Pass or Fail "If passing grade" - Go to the next slide. "If failing grade: - Send email to... on the drop down the Continue playing project is not checked. But when I tested it out, it does continue playing the project when the user fails. Should I set the Action upon failure to No Action? Other solutions?

    ashorsley,
    One thing you can do is set it such that if the user fails the quiz, then it jumps to a slide you have created.  The slide can simply say "Thank you" or "Sorry, you did not pass" and include any further instructions the learner might need.  Say whatever you want.  Either way, you then set your Project end options to Close the Program.  So it looks like this:
    For instance:
    Slide 26:  last question slide in the quiz          Properties:  On slide exit: Go to next slide
    Slide 27:  Results of the quiz slide                 Properties:  On slide exit: Go to next slide
    Slide 28:  "Congratulation you passed!"          Properties:  On slide exit: Jump to slide 30
    Slide 29:  "Sorry, you did not pass."               Properties: On slide exit: Jump to slide 30
    Slide 30:  Thank you.                                   Properties:  On slide exit: No action
    In Publish/Preferences/Quiz/Pass or Fail, set the following:
    If passing grade: Jump to slide 28
    If failing grade:    Jump to slide 29
    In Publish/Preferences/Project/Start and End, set the following:
    Project end options:   Action:  Close Project
    That should do it if I understood your problem correctly.  It has worked for me.
    WARNING: In Publish/Preferences/Quiz/Settings if you have set Required to Pass Required - the user must pass this quiz to continue, then this solution will not work.  Set it to Required - the user must take this quiz to continue, then it should work fine.
    Good luck.  Let us know how this solution works.  Any more questions, feel free to ask.
    Take care,
    Jorge G.

  • Saving Actions

    How does one save actions? The 'save' option is greyed out in the actions dropdown panel.

    You highlight the action set the action is in in the Actions Palette. Then you use the Action Palette's fly-out menu item save action. The fly-out menu pops up when you click on the little icon in the top right corner in the Actions palette. Save the actions sets into a folder like My Photoshop Actions.  So you know where you keep them. When you upgrade to the next version of Photoshop you know where to load them from...

  • CHARM: Lock actions if the same role is used

    Hi,
    is it possible to lock the actions, when a user is (e.g.) change manager and developer at the same time?
    in some our department it is possible that to different users got the role change manager and developer, but we dont want let one person commit changes and develop at the same time.
    kind regards
    dirk

    Hi Dirk,
    you could create a scheduling condition for the action that makes the action not show up in the action dropdown if the change manager and developer are the same BP.
    regards,
    Jason

  • Actions Wizard Panel missing actions

    How do I get the Action Wizard Panel to show recently created actions? Mine only shows the 6 default actions that come with acrobat. The actions I created are listed at the very top  in the "manage actions" dropdown, but they do not display, and therefore, I do not seem to be able to run them! Has anyone encountered this before?  Windows 7, Acrobat XI Pro. I've updated acrobat, repaired the installation, and checked that it is the most current version.  What am I missing? Thanks!

    Guess I'll answer my own question before I forget how to navigate to the forums. It may not be a total answer, but in a total fluke-move, I found out  it appears to have something to do with screen real estate: if I close all my panels, and open ONLY the actions wizard, the actions are all listed. Maybe the panel populates actions from the middle one out ...  or something.

  • E-sourcing Add new Element in Actions dropdowmn list in Project Document

    Hi Evrybody ,
    I am trying to add new element in Actions dropdown list in Project document (in drop down already has Create Auction ,Create demand ,create agreement, Create RFx   elements ) .
    i am able to change the text of existing but not able to add new elements .
    Could you please help me on this .
    Thanks
    Pavan Reddy.

    Pavan,
    My understanding is that the Actions tab is used to execute scripting.  Some of the scripting is embedded in the system, like Create RFx or Create Auction.  This you can not change easily. 
    If you want to add a new item to the Actions for Projects create a Script Definition with Script Type: Toolbar and Class: Project (1100).  Keep in mind that you will also have to have a functioning Script Definiton.
    Regards,
    James

  • Assigning keyboard shortcuts to actions not working

    I have two actions that I use quite often. I assigned keyboard shortcuts to them in the actions dropdown menu. However whenever I press the shortcut keys, nothing ever happens. I have tried changing the modifier key combinations......nada. If some has any suggestions, I sure would appreciate them.
    Thanks

    Most F keybaord shortcuts are assigned to something already in Illustrator or by your OS, so you may have a conflict.
    System preferences >> keyboard >> (CHECK) Use all F1, F2 ...

  • How to send quiz results to a web page?

    Okay, this should have taken 2 minutes, not 2 hours. Very frustrating. Here is the situation:
    * Downloaded Captivate 5 Trial Version
    * Created based quiz (which took forever to figure out how to set the correct answers -- HORRIBLE user interface for setup, but that is another issue)
    * I want the results sent to a web page. I will code the web page & database calls, etc. to handle the information (I am a web developer). Just need the information sent somewhere!
    Several big issues here:
    1. When setting up a URL for the "Pass or Fail", nothing happens. User not taken anywhere. No "Post Results" button shown. The Captivate file just ends and that's it. ??
    2. Finally figured out that I needed the "Internal Server" option chosen to have a Post Results button shown. Okay.
    So when I click Post Results (after answering the 5 questions correctly), I am shown a login box. Why? What is this for? This is not needed. I am going to an INTERNAL SERVER. It is none of Adobe's business what this person's name/email is. What gives? Okay... anyways, I enter my own Adobe login information. It then says "Connecting..." then I get a Status Message that says "Unknown Error". Keep in mind this will be used by a general audience, of which approximately 99.9% will not have an Adobe ID, nor should they need one.
    How I can easily have the Captivate file redirect the user to pages like this: Confirm.aspx?pass=yes or Confirm.aspx?pass=no.
    I don't need anything fancy. But I do need something that works. This is terribly frustrating and I'm about to say it just doesn't work. Please tell me I am wrong.
    Thank for your time and for reading this.
    -Randy

    The Quiz Results slide's Continue button actions are set under Quiz Preferences > Pass or Fail > If Passing Grade etc. By default, the Continue button is set to just continue on to the next slide after the Quiz Results.
    After the user clicks the Continue button on the Quiz Results slide any Pass/Fail actions you've set up there will be evaluated and executed.
    So if the user achieved a passing score, and you set up an action such as Go to URL in Current Window for that case, then the user should find themselves redirected to that URL.  If there was a different action for Failure, and the user failed, then that should happen.  But either of these will only happen after the Continue button is clicked.
    I tested this by setting www.google.com as the go to URL and it worked.  To see if the URL is the issue, try using another URL that you know everyone can get to.  If that works, try to find out why the URL you want to use is not working.  If no URL works, something else is interfering with the action.

  • Error configuring and starting Managed Server in WebLogic 10.3

    Hi,
    I am able to configure and start the Managed Server on windows environment. I am trying to configure Managed Server on linux environment. I am configuring the Managed Server with custom keystore. When I configured the Managed Server I specified the keystore/trustsote information in the Keystores tab of the Admin Console for Managed Server settings. Specified Private Key Alias, Password in SSL tab.But when I am starting the Managed Server from command line, I see the process looking for demo trust files and failing.
    Here is the command I run to start the Managed Server:
    ./startManagedWebLogic.sh MyManagedServer1 https://localhost.localdomain:8443
    Below is the console output:
    <Mar 11, 2015 12:37:44 PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.45-b01 from Sun Microsystems Inc.>
    <Mar 11, 2015 12:37:45 PM PDT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
    Enter username to boot WebLogic server:beaadmin
    Enter password to boot WebLogic server:
    <Mar 11, 2015 12:37:53 PM PDT> <Info> <Security> <BEA-090908> <Using default WebLogic SSL Hostname Verifier implementation.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/wlserver_10.3/server/lib/DemoTrust.jks.>
    <Mar 11, 2015 12:37:53 PM PDT> <Error> <Security> <BEA-090132> <Could not open the keystore file /opt/wlserver_10.3/server/lib/DemoTrust.jks for read access. Exception: java.io.FileNotFoundException: /opt/wlserver_10.3/server/lib/DemoTrust.jks (No such file or directory)>
    <Mar 11, 2015 12:37:53 PM PDT> <Warning> <Security> <BEA-090164> <Failed to load trusted certificates from keystore /opt/wlserver_10.3/server/lib/DemoTrust.jks of type jks>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jre1.6.0_45/lib/security/cacerts.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 11, 2015 12:37:53 PM PDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0  Tue Nov 15 08:52:36 PST 2011 1441050 >
    <Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
    <Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
    <Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
    <Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
    <Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
    <Mar 11, 2015 12:37:55 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
    <Mar 11, 2015 12:37:55 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
    <Mar 11, 2015 12:37:55 PM PDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at https://localhost.localdomain:8443.>
    <Mar 11, 2015 12:37:55 PM PDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <Mar 11, 2015 12:37:55 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Mar 11, 2015 12:37:55 PM PDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Mar 11, 2015 12:37:55 PM PDT> <Notice> <LoggingService> <BEA-320400> <The log file /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Mar 11, 2015 12:37:55 PM PDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log00015. Log messages will continue to be logged in /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log.>
    <Mar 11, 2015 12:37:55 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log is opened. All server side log events will be written to this file.>
    <Mar 11, 2015 12:37:56 PM PDT> <Error> <Security> <BEA-000000> <[Security:090837]The configured keystore location for the PKI Credential Mapper is either null or empty.>
    <Mar 11, 2015 12:37:56 PM PDT> <Error> <Security> <BEA-000000> <[Security:090815]The password provided for the keystore configured for the PKICredential Mapper was null.>
    <Mar 11, 2015 12:37:57 PM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Mar 11, 2015 12:37:57 PM PDT> <Critical> <Security> <BEA-090403> <Authentication for user beaadmin denied>
    <Mar 11, 2015 12:37:57 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user beaadmin denied
    weblogic.security.SecurityInitializationException: Authentication for user beaadmin denied
            at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:966)
            at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
            at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
            at weblogic.security.SecurityService.start(SecurityService.java:141)
            at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
            Truncated. see log file for complete stacktrace
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User beaadmin weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
            at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
            at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            Truncated. see log file for complete stacktrace
    >
    <Mar 11, 2015 12:37:57 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Mar 11, 2015 12:37:57 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Mar 11, 2015 12:37:57 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Why is it looking for demotrust.jks file to start the Managed Server. We don't use the demo trust and cannot copy to the location it is referring to. I followed the solution provided at the below link:
    http://serverfault.com/questions/106499/custom-trust-and-custom-identity-keystore-in-weblogic-10-3
    There are 2 options given in the link. To update the boot.properties of the Admin Server and appending JAVA_OPTIONS to DomainEnv file. Both of these caused the failure of Admin Server. I couldn't bring up the server after these changes.I also came across posts talking about boot.properties for Managed Server. I don't see the security folder that has boot.properties for my Managed Server (verified it on both windows and linux boxes).
    Thanks in advance.
    -nn.

    Hi Faisal,
    Here is the config.xml file:
    <?xml version="1.0" encoding="UTF-8"?>
    <domain xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd"
            xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security"
            xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
        <name>JCRMDomain</name>
        <domain-version>10.3.4.0</domain-version>
        <security-configuration xmlns:xacml="http://xmlns.oracle.com/weblogic/security/xacml">
            <name>JCRMDomain</name>
            <realm>
                <sec:authentication-provider xsi:type="wls:default-authenticatorType">
                    <sec:control-flag>SUFFICIENT</sec:control-flag>
                </sec:authentication-provider>
                <sec:authentication-provider xmlns:ext="http://xmlns.oracle.com/weblogic/security/extension" xsi:type="ext:jcrm-authenticatorType">
                    <sec:name>JcrmAuthenticator</sec:name>
                    <sec:control-flag>SUFFICIENT</sec:control-flag>
                </sec:authentication-provider>
                <sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
                <sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
                <sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
                <sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
                <sec:credential-mapper xsi:type="wls:pki-credential-mapperType">
                    <sec:name>PKICredentialMapper</sec:name>
                </sec:credential-mapper>
                <sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
                <sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
                <sec:user-lockout-manager>
                    <sec:lockout-threshold>3</sec:lockout-threshold>
                    <sec:lockout-duration>15</sec:lockout-duration>
                    <sec:lockout-reset-duration>99999</sec:lockout-reset-duration>
                </sec:user-lockout-manager>
                <sec:deploy-role-ignored>false</sec:deploy-role-ignored>
                <sec:deploy-policy-ignored>false</sec:deploy-policy-ignored>
                <sec:fully-delegate-authorization>true</sec:fully-delegate-authorization>
                <sec:security-dd-model>DDOnly</sec:security-dd-model>
                <sec:combined-role-mapping-enabled>true</sec:combined-role-mapping-enabled>
                <sec:name>myrealm</sec:name>
                <sec:delegate-m-bean-authorization>false</sec:delegate-m-bean-authorization>
                <sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator"
                                        xsi:type="pas:system-password-validatorType">
                    <sec:name>JCRMPasswordValidator</sec:name>
                    <pas:max-password-length>31</pas:max-password-length>
                    <pas:min-password-length>15</pas:min-password-length>
                    <pas:min-numeric-characters>2</pas:min-numeric-characters>
                    <pas:min-lowercase-characters>2</pas:min-lowercase-characters>
                    <pas:min-uppercase-characters>2</pas:min-uppercase-characters>
                    <pas:min-non-alphanumeric-characters>2</pas:min-non-alphanumeric-characters>
                </sec:password-validator>
                <sec:deployable-provider-synchronization-enabled>false</sec:deployable-provider-synchronization-enabled>
            </realm>
            <default-realm>myrealm</default-realm>
            <credential-encrypted>{AES}cpwhv2peqwl0Z8Ma1Jk7KlmC6d1gtCAqxnzrmR5ssybHpM9AUzbBRJ7rE7m4/7U16IHgsTMkcOr/5/abZJ4NeuHR45jdDK1EjFmnUuPssISmGkan3EIpCKHmPPIynVxh</credential-encrypted>
            <node-manager-username>wdUXiuwL5A</node-manager-username>
            <node-manager-password-encrypted>{AES}UDiZjaLOrm0y+/I9noQVURudpzmRKMBOQR2B8ofNIt8=</node-manager-password-encrypted>
        </security-configuration>
        <server>
            <name>AdminServer</name>
            <max-http-message-size>10000000</max-http-message-size>
            <ssl>
                <name>AdminServer</name>
                <enabled>true</enabled>
                <hostname-verifier xsi:nil="true"></hostname-verifier>
                <hostname-verification-ignored>true</hostname-verification-ignored>
                <client-certificate-enforced>false</client-certificate-enforced>
                <listen-port>8443</listen-port>
                <two-way-ssl-enabled>true</two-way-ssl-enabled>
                <server-private-key-alias>localhost.localdomain</server-private-key-alias>
                <server-private-key-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</server-private-key-pass-phrase-encrypted>
                <ssl-rejection-logging-enabled>true</ssl-rejection-logging-enabled>
                <allow-unencrypted-null-cipher>false</allow-unencrypted-null-cipher>
                <use-server-certs>true</use-server-certs>
                <jsse-enabled>true</jsse-enabled>
            </ssl>
            <listen-port-enabled>false</listen-port-enabled>
            <web-server>
                <keep-alive-secs>60</keep-alive-secs>
                <https-keep-alive-secs>60</https-keep-alive-secs>
            </web-server>
            <listen-address/>
            <java-compiler>javac</java-compiler>
            <tunneling-enabled>true</tunneling-enabled>
            <tunneling-client-ping-secs>45</tunneling-client-ping-secs>
            <tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
            <client-cert-proxy-enabled>false</client-cert-proxy-enabled>
            <key-stores>CustomIdentityAndCustomTrust</key-stores>
            <custom-identity-key-store-file-name>certstores/keystore</custom-identity-key-store-file-name>
            <custom-identity-key-store-type>JKS</custom-identity-key-store-type>
            <custom-identity-key-store-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</custom-identity-key-store-pass-phrase-encrypted>
            <custom-trust-key-store-file-name>certstores/truststore</custom-trust-key-store-file-name>
            <custom-trust-key-store-type>JKS</custom-trust-key-store-type>
            <custom-trust-key-store-pass-phrase-encrypted>{AES}uSkLzfC74bMCEjomgVdHtVw47iZg8BN71g7cdKr+XHo=</custom-trust-key-store-pass-phrase-encrypted>
        <overload-protection>
          <panic-action>system-exit</panic-action>
          <failure-action>force-shutdown</failure-action>
          <server-failure-trigger>
            <max-stuck-thread-time>600</max-stuck-thread-time>
            <stuck-thread-count>3</stuck-thread-count>
          </server-failure-trigger>
        </overload-protection>
        </server>
        <server>
          <name>MyManagedServer1</name>
          <ssl>
            <enabled>true</enabled>
            <listen-port>8445</listen-port>
            <server-private-key-alias>localhost.localdomain</server-private-key-alias>
            <server-private-key-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</server-private-key-pass-phrase-encrypted>
          </ssl>
          <machine xsi:nil="true"></machine>
          <listen-port>8444</listen-port>
          <listen-port-enabled>true</listen-port-enabled>
          <cluster xsi:nil="true"></cluster>
          <web-server>
            <web-server-log>
              <number-of-files-limited>false</number-of-files-limited>
            </web-server-log>
          </web-server>
          <listen-address></listen-address>
          <key-stores>CustomIdentityAndCustomTrust</key-stores>
          <custom-identity-key-store-file-name>certstores/keystore</custom-identity-key-store-file-name>
          <custom-identity-key-store-type>JKS</custom-identity-key-store-type>
          <custom-identity-key-store-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</custom-identity-key-store-pass-phrase-encrypted>
          <custom-trust-key-store-file-name>certstores/truststore</custom-trust-key-store-file-name>
          <custom-trust-key-store-type>JKS</custom-trust-key-store-type>
          <custom-trust-key-store-pass-phrase-encrypted>{AES}uSkLzfC74bMCEjomgVdHtVw47iZg8BN71g7cdKr+XHo=</custom-trust-key-store-pass-phrase-encrypted>
          <data-source>
            <rmi-jdbc-security xsi:nil="true"></rmi-jdbc-security>
          </data-source>
        </server>
        <production-mode-enabled>false</production-mode-enabled>
        <embedded-ldap>
            <name>JCRMDomain</name>
            <credential-encrypted>{AES}LNAnq4qCQQmy9rCOMN+uIZVPq1bVvPrwQqqtOScZrnYmwESt9aruHNVy4IjqMWz7</credential-encrypted>
        </embedded-ldap>
        <administration-port-enabled>true</administration-port-enabled>
        <configuration-version>10.3.4.0</configuration-version>
        <admin-server-name>AdminServer</admin-server-name>
    </domain>
    It has 'CustomIdentityAndCustomTrust' for both Admin Server as well as managed Server in it.
    Thanks,
    nn

  • Email to be sent on execution of Process chain

    Hi,
    I have a requirement as follows.
    On successful execution of process chain an email must be sent to a group of users.
    I have made a distribution list using Tcode SO23 and included the message in the last step of process chain. But no messsge is being sent even on successful execution of process chain.
    Can anyone throw light on this?
    Regards,
    Manisha

    Hi Manisha,
    You can create the Message alert for process chain as follows.
         1. Goto change mode of Process Chain
         2. Right click on the particular Process step/Process chain and choose Create Message.
         3. Choose the Actions (Sucessful / Failure/Always) for which you want to aler the users
         4. Choose the New variant and define the Variant Name and Message header and enter
         5. Create the message and the save the variant and activate the process chain.
    Once you triggere the process chain, according the message typr, the users will be alerted.
    Regards,
    Gowrisankar Nk

  • Key Mapping Error InterCompany

    Dear Experts,
    I'm facing error while working on intercompany addon
    Please find the below error and attachments, and help me to solve this issue
    Intercompany Transaction :
    Sender System: L002
    Sender Transaction Type: Business Partner
    Sender Transaction Number: V00001
    Receiver System: L001
    Receiver Transaction Type: Business Partner
    Receiver Transaction Number:
    Action:
    Status: Failure
    Error Details: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: DI Error: (-5002)  [OCRD.GroupCode] , &apos;Linked value 0 does not exist&apos;

    Hi Sivaram,
    Keymapping process is improved a lot in the latest patch release.
    however, for java heap error, you are left with only one option that is excel based keymapping.
    Please refer to the user guide for the same or you can map the object one by one using the keymapping GUI as you were doing before.
    Suggestion is to upgrade to the latest patch of SAP b1  and intercompany both.
    Regards,
    Agneesh
    The Intercompany Team

  • SQL server agent jobs throws random errors while the ETL process works fine.

    Hi,
    I have this problem with SQL agent jobs.
    We went from sql2008 to sql2012 and migrated SSIS without problems. The ETL process runs fine and the OLAP cubes are processed.
    I have a job which calls the master execution dtsx for a particulair customer. When the ETL load and OLAP is processed it should go to the next customer. The problem i have is that the agent logs some errors for random customers. I tried to do only two clients
    in one job this works then i add the third client and then it fails (log wise) for a customer which did run successfully before when there were only two customers.
    Despite the error message the ETL did run, there were no duplicate keys and OLAP was processed???
    Im very close to pull all my hair, because some combinations like two customers work, and placing these two customers with a third one it then fails again. (again cubes are processed and data is integer yet i keep getting these annoying errors in the log)
    Perhaps someone could help me further. 
    -Miracles are easy, the impossible takes a bit longer-

    Just double-click on the Agent job, then click on Steps property page (on your left), you must be able to see a list of steps with the action "On Failure" which you should examine.
    Arthur My Blog

  • R183 System Update - Scheduled to go live January 22nd, 2013

    We are announcing a new Business Catalyst release, scheduled to go live on January 22nd, 2013.
    Please refer to our official blog post for feature highlights and other major improvements slated for this release.
    Minor enhancements and cosmetic improvements
    Grid state persistence - with this release, most of the item lists displayed in the new admin user interface will remember the page and the sorting applied on a list when returning from a detail page
    Edit page properties in the new file manager - when editing a page in the new File Manager, users can now edit the page properties like SEO metadata, workflows, or page visibility
    Updated Email Marketing wizard - we have simplified the email campaign wizard and merged the Type and Details step into a single one, updated the controls for setting up one-off and loyalty campaigns and moved the Email Campaign subject into the content tab
    Secure domain redirects - starting with this release, all sites will have this feature turned on; if you redirect users to external websites, you should add those into the Secure Domain Redirect list
    SPAM improvements - comment workflow emails are no longer sent when a comment is marked as SPAM
    Limit the comment size - Starting with this release we will be limiting the number of characters per comment to 4000
    URL Redirects have been moved from Page Details into Site Settings menu
    Display how many subscribers are into a Secure zone in the secure zone list view
    Renamed Advanced View tab from pages screen into List View and made it default for new sites
    After sending a Campaign, don't show an error when redirected to the Stats tab
    Site Manager > Pages - Advanced view buttons don't have the same height. Might be reproducible in other screens as well.
    Updated styling for Find a Customer link found in some CRM screens
    Updated styling for date picker in filters
    Fixed icons alignment in the left menu + redesign some icons to be more relevant to the menu entry
    Fixed footer spacing in some screens (it's not always the same)
    Page status (draft/live) was sometimes shown in grey
    Table list headers font-size is not the size in specs (all over the UI)
    Consistency improvements for links color (we had 5 different tones of blue, now we have just one as in specs)
    Site Manager > Page Details - Breadcrumb has the correct caption Pages instead of Web Pages
    Web Forms field categories wrap on the second line when the window is resized although the screen is optimized for low resolutions screens.
    Wizard tabs have different colors depending on the screen.
    Issues fixed by January release
    Issue #
    Description
    3157574
    Updated catalog import to fix an issue causing the import to generate incorrect URLs when more than one sub catalogs were created
    3164429
    Enforced shipping tax validation to prevent site customers from bypassing the shipping tax payment
    3343967
    Updated the Site Setting > File Manager to prevent users from creating folders that contain  # in their name
    3365127
    Fixed an issue on list views that was causing an incorrect datetime sort (was sorting alphabetically by date instead of actual date)
    3373342
    Fixed an issue that intermittently generated an error when when accessing the BC Toolbox panel, via the   admin console
    3377475
    Updated secure zone login to prevent an "Secure Zone Access Expired" error being displayed  when trying to log in a secure zone in some cases
    3430574
    Fixed an issue causing muCommander to corrupt files on upload using SFTP
    3430529
    Fixed a file system issue that was not preventing SFTP clients from retrieving missing or corrupt files on the remote storage and overwrite the client local files
    3428565
    Fixed an issue preventing users from connecting to sites on SFTP, using FireFTP
    3430571
    Fixed some issues causing CuteFTP and muCommander for Mac to corrupt files on   upload
    2908470
    Updated {tag_recipientfirstname} so that it will render an empty string instead of "Recipient" if first name is empty
    2567870
    Updated the Dynamic Menu sorting functionality to fix an issue that was causing menu items to intermittently skip a few places
    2567955
    Fixed an issue causing state tax to not be covered by the gift voucher payments on some   occasions
    2567515
    Fixed an issue causing the Web App Edit Layout to not populate checkboxes that have   the ampersand & in the name
    2753571
    Creating a new Free Shipping Type Option hides all other   pre-configured shipping options in front-end for all the sub-domains of a   website
    3227500
    Fixed "Add RSS channels to a WebPage" and "Get RSS   HTML code" links from the "Actions" dropdown list  in the new admin user interface
    3344567
    Fixed an issue preventing the get RSS HTML code link from working on the new admin user interface
    3220522
    Returning URL for DIBS payment gateway blank
    3217223
    Fixed an issue causing incorrect data to be displayed when using affiliate program tags: {tag_referralslastmonth} and   {tag_referralslastweek}
    3343296
    Fixed a an issue causing the line item descriptions displayed on a packaing slip layout to be mis-aligned
    2801224
    Updated tag_productlist sorting. The sortBy parameter can now accept "releasedate" and "expirydate" parameters.  We also added the ability to sort ascending or descending for any sort type. Example: in order to sort by release date ascending, use "releasedate asc". In order to order by expiry date descending use "expirydate desc" or simply "expirydate" which will work as before (dates are descending by default).
    Deprecated functionality
    {tag_tellafriend} and {tag_tellafriendurl} will no longer be available for use in email campaigns. Existing campaigns will continue to work as designed.

    Issues:
    1. The ecommerce Stock attribute beta is live with the bugs reported in beta. Including the main one where if you have products with stock attributes, despite them rendering in the export file you can never import products back into the system because of stock sku features. Deleting all products allows you to upload with all sku information as a work around but on some uploads stocks are reset to 0.
    2. Intermintant permission issues creating folders that have same name as web apps.
    3. Can not make folders in BC editor (under develop) that are existing web apps
    4. If you move a pre existing page via FTP into a new created web app folder and rename it to index.html It will not work. In the admin it has no file extension so you have to add it there.
    5. Just had it confirmed by live chat support who replicated it on a demo site. Securezone update details form with custom CRM fields.
    CRM fields will render current data but will not update the custom CRM fields in the crm on submission of the form.

Maybe you are looking for