Entry SE01 1890 does not exists in T005G(Table)

Hi,
We are getting Bdoc error "Entry SE01 1890 does not exists in T005G(Table)" in CRM system.We are using CRM 7 and ECC 6.
Please help me in resolving this issue.
Thanks,
Rahul

Hi,
Thanks for the reply.
We are getting this error in BDOC monitoring.Similarly we haev more errors related to same error like" Entry SE01 1880 does not exists in T005G(Table)".
.Actually when i check this table city code 1880 is mentioned under region 18 in the country key SE.
Please help me

Similar Messages

  • Entry does not exists in check table -- Validation

    Hi friends..,
      I am able to create new entries in my table with INSERT statement through a function module.
    But, the problem is..,
    I am having one key field in my table, and T1(another table) is check table for this.
    So while creating the entries through SE11, its giving error message like ENTRY DOES NOT EXISTS IN CHECK TABLE. But the same entry i am able map through my function module..!
    Any extra settings reuired for this..?
    Or.,
    Am i need to write validation code?
    Thanks,
    Naveen.I

    Hi...Rama chary..,
    I am having separate function modules to do this..!
    So here I can't to update two table at time.
    My function module updating a table field with out checking it wrt its check table..!
    Even i write code to check table , it will not meet the functionality of SE11 error..!??
    so what can i do..?
    Thanks,
    Naveen.I

  • In MVT 545 Check table XEKPO: entry 00000 0000   does not exist

    Hello
    While using the mvt type 545 with MB1C (Included in mvt)
    I am getting the following error what could be the possible reason
    Check table XEKPO: entry 00000 0000   does not exist
        Message no. M7001
    Diagnosis
        In table XEKPO the entry 00000 0000   is missing.
    Regards
    Niti Narayan Chaturvedi

    This is a authomatic mvt, But I am using a manual route to excecute, is this causing problem
    Where is the check for the automatic mvt
    Niti Narayan

  • Entry EN 40 does not exist - check your entry

    Dear Friends
    I'm facing a Issue in MSS where when manager is trying to view the employee Trip details in UWL. I'm getting a error as "Entry EN 40 Does not Exist - Check your Entry"  I've checked the Table V_T702X & there I can view the Trip Types which I've created for Trip Provision variant 40.
    V_T702X:
    Kindly let me know what else I'm missing as this is very urgent & it need to be resolved ASAP.
    Cheers
    Pradyp

    Hi Ankur
    Thanks for the quick reply,
    I've checked the Table PTRV_HEAD, and below is the data I've found in that.
    Kindly let me know what else need to be checked.
    Cheers
    Pradyp

  • [nQSError: 59014] The  requested column does not exist in this table.

    Hi
    As you know this error has been discussed in other threads.. the difference in mine is that not only the time series measures but all the columns are giving me the error...none of the columns are being displayed... The rpd has no consistency errors. can anyone suggest what may be going on?
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
    SQL Issued: SELECT column1 saw_0 FROM Paint3 ORDER BY saw_0
    Thank you
    mm58

    I guess you have the column in RPD, and it is available for queries.
    are you using any time measures? if so check you chronological keys.

  • The requested column does not exist in this table

    Hi All,
    I am getting the following error:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59014] The requested column does not exist in this table. (HY000)
    SQL Issued: SELECT "Customers - Dim".CITY FROM MVDEMO ORDER BY 1
    When I tried viewing data online I am able to view the data in the physical Layer. Also I tried connecting thru ODBC Client and issued the same SQL (above) and it returns the data.
    I am using Oralce BIEE 10.1.3.2.1 version.
    Please let me know if any faced this kinda issue and how to resolve this.
    Thank you.

    Check your column mapping in the BMM layer in your Customers - Dim logical table. Does the CITY column point to a physical table column?

  • Error in ALV : Field Does not exists in Output table .

    Hi All,
    In my ALV report, program get dumped and showing error when i tried to put a col named Distribution channel ion the alv.
    I have put the Distribution cannel field in the IT_FInal table , but still getting folwong errors :
    Error : Field Symbol is not been assigned.
    As Instructed i have passed            I_INTERFACE_CHECK              = 'X'.
    By this i am getting detail error that :
    Field Distribution channel does not exists in Output table & Heading for List is missing .
    But i have maintained the distribition channel in IT_Final table
    Please suggest wheather we have to define dis channel in any other place.
    Thanks in advance.
    Can any one help me regrarding this.
    Thanks in advance.

    Hello,
    You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
    BR,
    Suhas
    PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

  • Action &OBJECT_ID& does not exist - when Filtering Table

    Hey Everyone,
                             I am trying to implement filtering on a table (not alv).. i have followed the example in DEMO_TABLE.
    - have put the method in WDDOMODIFYVIEW, bound the filtervalue of each column, and implememented a toggle button to show and hide filter row and gave it a filtering function.. - basically exactly like DEMO_TABLE.
    but, when i enter a filter value.. i get this error.
    The following error text was processed in the system LXA : Action &OBJECT_ID& does not exist
    The error occurred on the application server vmsaple07_LXA_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: IF_WDR_RR_CONTROLLER~GET_ACTION of program SAPLWDR_RUNTIME_REPOSITORY
    Method: GET_ACTION_INTERNAL of program CL_WDR_CONTROLLER=============CP
    Also, something else thats not right is.. if i put an action under ONFILTER of the table.. The filter row appears when i am on Workbench... BUT when i test the application on the browser, the filter row doesnt appear!.. it did appear once, but its not appearing anymore.
    Thanks...

    hey, i figured it out.. My problem was in this part of WDDOMODIFYVIEW...
    Set or cancel the table's filter action
    IF l_is_filter_on = abap_true.
    l_table->set_on_filter( 'FILTER' ).
    ELSE.
    l_table->set_on_filter( '' ).
    ENDIF.
    You must pass the name of filtering action in the above code.. Just create an action(like below), and pass the action name to the - l_table->set_on_filter( 'FILTER' ) - in WDDOMODIFYVIEW.
    method ONACTIONFILTER.
    wd_this->table_method_hndl->apply_filter( ).
    endmethod.
    Edited by: imatari on Jul 24, 2010 7:25 PM

  • Field does not exists Error - INSTALLATION TABLE

    We have applied ML MP9 on system database for our eRecruit Instance. We are getting a "Field does not exists" (for eg., INSTALLATION.GL) error for the components which refers to INSTALLATION table.
    The error gets resolved if we introduce a .value in PeopleCode.
    Note: Our Dev Instance is working fine which has ML MP9 applied on it.
    Please find the PeopleBooks Comments for the .value Property:
    Considerations Using INSTALLATION or OPTIONS Tables
    When using the INSTALLATION or OPTIONS table, you cannot use the Value property. You must use the old style format, not the field object format. For example, the following code is invalid:
    If %Page = Page.GP_RUN_TYPE And
    INSTALLATION.TL.Value = "N" Then
    &RS2.HideAllRows();
    Thanks & Regards
    Sudha

    Hello,
    You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
    BR,
    Suhas
    PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

  • Value does not exist in VIQMEL table due to ILOA-ILOAN field

    Hello All,
    I am trying to check a PCR/OCR Notification but it seems Notification does not exist.
    The notification number is not there in VIQMEL table.
    VIQMEL takes reference of 3 tables - QMEL, QMIH and ILOA.
    I checked QMIH table for this notification and found a field ILOAN. The ILOAN number given in table QMIH is not there in ILOA table.
    Can you explain what could be the possible reason of empty ILOAN field?
    Also if you could explain the significance of field ILOAN and how this number is generated?
    Thanks & Regards
    Devraj

    There was an issue of value range of notification..

  • Error :Extract Structure does not exist for the table YFSP03A .

    Hi Could you please help me to solve the above mentioned problem?
    I have a requirement where i have to generate the Data Source ' 3FI_SL_FS_SI ' using the table YFSP03A .
    Using the Tcode: BW03MAST i tried to assign FI-SL to the ledger but it throwed me an error that extract structure does not exit for the table YFSP03A .The reason being that i didnot create an extract structure for the table.So i tried to create it using the Tcode: BW01,but i did not have authorisation for the Transaction and BI team also could not generate as even they were not authorized to generate extract Structures.
                          So, Please are there any other ways to generate Extract structure for the table so that i can generate the Data source? Or is there any other means of generating the Data Source? And i couldnot access the other Tcodes viz :FAGLBW03, FAGLBW01,  FAGLBW02.

    Hi Bharath,
    Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
    After activation try to retransport.
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

  • Table compare deleting rows which does not exist in target table

    Hi Gurus,
    I am struggling with an issue in Data Services.
    I have a job which uses Table Compare, then History Preserving and then a Key Generation transforms.
    There is every possibility that data would get deleted from the source table.
    Now, I want to delete them from the target table also.
    I tried Detect deleted rows but it is not working.
    Could some one please help me on this issue.
    Thanks,
    Raviteja.

    Doesn't history preserving really only operate on "Update" rows.  Wouldn't it only process the deletes if you turned the "Preserve Delete row(s) as update row(s)" on?
    I would think if you turned on Detect Delete rows in the Table compare and did not turn this on in the history preserving it would retain those rows as delete rows and effectively remove them from the target.
    Preserve delete row(s) as update row(s)
    Converts DELETE rows to UPDATE rows in the target warehouse and, if you previously set effective date values (Valid from and Valid to), sets the Valid To value to the execution date. Use this option to maintain slowly changing dimensions by feeding a complete data set first through the Table Comparison transform with its Detect deleted row(s) from comparison table
    option selected.

  • ORA-01092: ORACLE instance terminated. Disconnection forced ORA-00942: table or view does not exist on 12C RAC

    Hi Geeks,
    I have encountered an issue while starting up my database on 12c RAC.
    Till mount it goes fine but when i attempt to open it throws me an error.
    Total System Global Area 1.5400E+10 bytes
    Fixed Size                  4737560 bytes
    Variable Size            2952791528 bytes
    Database Buffers         1.2415E+10 bytes
    Redo Buffers               26857472 bytes
    Database mounted.
    SQL> alter database open;
    alter database open
    ERROR at line 1:
    ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-00942: table or view does not exist
    Process ID: 11338068
    Session ID: 1429 Serial number: 3
    Here is the trace file output...
    ORACLE_HOME = /oracle_home/app/orahome
    System name:    AIX
    Node name:      INS1
    Release:        1
    Version:        7
    Machine:        00C8CCA74C00
    Instance name: INST1
    Redo thread mounted by this instance: 1
    Oracle process number: 7
    Unix process pid: 20381876, image: oracle@ins1 (TNS V1-V3)
    *** 2014-11-27 22:49:20.892
    *** SESSION ID:(197.5) 2014-11-27 22:49:20.892
    *** CLIENT ID:() 2014-11-27 22:49:20.892
    *** SERVICE NAME:() 2014-11-27 22:49:20.892
    *** MODULE NAME:(sqlplus@ins1 (TNS V1-V3)) 2014-11-27 22:49:20.892
    *** ACTION NAME:() 2014-11-27 22:49:20.892
    2014-11-27 22:49:20.889716 : Start recovery for domain=0, valid=0, flags=0x4
    *** 2014-11-27 22:49:24.580
    Successfully allocated 32 recovery slaves
    Using 3 overflow buffers per recovery slave
    *** 2014-11-27 22:49:24.740
    Thread 1 checkpoint: logseq 15, block 2, scn 3510749
      cache-low rba: logseq 15, block 3
        on-disk rba: logseq 15, block 72, scn 3510824
      start recovery at logseq 15, block 3, scn 0
    *** 2014-11-27 22:49:24.981
    Started resilvering redo thread 1 seq 15 blocks 72-73
    *** 2014-11-27 22:49:24.994
    Completed resilvering redo thread 1 seq 15
    *** 2014-11-27 22:49:24.994
    Started writing zeroblks thread 1 seq 15 blocks 74-81
    *** 2014-11-27 22:49:24.994
    Completed writing zeroblks thread 1 seq 15
    ==== Redo read statistics for thread 1 ====
    Total physical reads (from disk and memory): 4096Kb
    -- Redo read_disk statistics --
    Read rate (ASYNC): 35Kb in 0.25s => 0.14 Mb/sec
    Longest record: 0Kb, moves: 0/104 (0%)
    Longest LWN: 2Kb, moves: 0/33 (0%), moved: 0Mb
    Last redo scn: 0x0000.0035922b (3510827)
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 262144
    Longest hash chain = 1
    Average hash chain = 25/25 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 151/176 = 0.9
    *** 2014-11-27 22:49:25.007
    KCRA: start recovery claims for 25 data blocks
    *** 2014-11-27 22:49:25.039
    KCRA: blocks processed = 25/25, claimed = 25, eliminated = 0
    *** 2014-11-27 22:49:25.054
    Recovery of Online Redo Log: Thread 1 Group 6 Seq 15 Reading mem 0
    *** 2014-11-27 22:49:25.060
    Completed redo application of 0.02MB
    *** 2014-11-27 22:49:25.235
    Completed recovery checkpoint
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 262144
    Longest hash chain = 1
    Average hash chain = 25/25 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 176/176 = 1.0
    Recovery sets nab of thread 1 seq 15 to 74 with 8 zeroblks
    *** 2014-11-27 22:49:26.000
    2014-11-27 22:49:26.000433 : Validate domain 0
    2014-11-27 22:49:26.001348 : Validated domain 0, flags = 0x0
    *** 2014-11-27 22:49:28.315
    Count of ofsmtab$: 0 entries
    *** 2014-11-27 22:49:28.732
    ORA-00942: table or view does not exist
    ORA-00942: table or view does not exist
    *** 2014-11-27 22:49:28.738
    USER (ospid: 20381876): terminating the instance due to error 942

    In my case the issue has fixed by executing the following..
    grant SELECT on SYS.USER$ to XDB;
    grant SELECT on SYS.USER$ to CTXSYS;
    grant SELECT on SYS.USER$ to DVSYS;
    grant SELECT on SYS.USER$ to LBACSYS;
    grant SELECT on SYS.USER$ to APEX_040200;
    grant SELECT on SYS.USER$ to DV_SECANALYST; 
    Refer the above screen shot...

  • Reading Characteristics of a DMS Document if the one does not exist yet

    Hi,
    Whenever a document is created with classification from transaction CV01N, an entries is being made into the tables of DB for the entered classification of the document. In this case I can get the characteristic values of document classification from within the BAdI method (for example DOCUMENT_MAIN01~BEFORE_SAVE) by selecting from DB table.
    Is there any way for read the document classification from within method DOCUMENT_MAIN01~BEFORE_SAVE before the actual save of document (corresponding entries does not exist in DB table)?

    Nemesis wrote:
    The original table t_data contains data which is normally deleted after 45 days, but it also stores data which is used for demonstration purposes by consultants, and which should not be deleted with the rest.
    Truncating would delete all the data in the table t_data, but the problem is that a subset of the data must be retained in the table. This means that either I adapt the purge code on this table not to delete the required data, or I displace the data that must be saved until the purge is done and then reinsert it into t_data...Choice 1:
    Use partitioned tables. Store the "temporary" data in partitions that can be deleted and the consultants demo data in another partition that doesn't get truncated.
    Choice 2:
    Have two similarly structured tables that store the two types of data so that one table can be truncated as required and the other maintains the data. Use a view on top of the tables to union the data to appear as one "table" for use in the application.
    As already mentioned by others, creating tables at run time is just wrong. It's poor design, it's not scalable and it leads to dynamically generated queries which can inherently have bugs that will not be apparent until run-time and sometimes only under certain conditions, thus leaving your code very liable to break and very difficult to debug.
    Global Temporary tables are what are generally used for temporary storage of data within a transaction or a session if they suit, but it sounds as if you need the data retention across sessions with truncate option available as required on partial data. That is one of the purposes of partitions on tables... or of course go for the two table and view option if you haven't paid for partitioning in your licence.
    Edited by: BluShadow on Dec 22, 2009 8:33 AM
    LOL! Billy posted whilst I was typing. p.s. Glad to see you got your Ace badge Billy. Well deserved.

  • SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

    There are dozens of entries regarding "
    List does not exist / The page you selected
    contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry. 
    I am getting the error above after creating a simple list with 4 columns.  the list is created during a new site definition activation but when I click on my list, I get the error above.  the list works if I deactivate the feature and re-activate
    it.  but has the error whenever the new site definition is created.  
    Has anybody encountered this issue on SP 2013?

    Hi，
    For your issue, there are plenty of possible reasons offered when we search this issue online.
    Here are similar issue posts, check whether they are helpful:
    http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
    http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
    http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

Maybe you are looking for