Actiontec wireless has stopped working

The wireless on our Actiontec router has stopped working. "Radio enabled" is shown as NO. Enabling it works, but as soon as we reset security, it turns itself off.
We've had a number of power outages, with the result that our router has gotten increasingly flakey, especially the wireless. I called tech support and he suggested doing a hard reset, which seemed to have fixed everything. However, following the mose recent power outage (yes, we get a lot of them), the hard reset procedure is no longer fixing the problem.
Any suggestions?

I lost my Wireless connection on Tuesday (2/28) around 10:30am. Ethernet connection is working fine. I called tech support and after about an hour of him working on my system he came to the conclusion that the router needed replaced. I received my new router Thursday afternoon (3/1) Installed the router per the instructions. Still no wireless connection. Ethernet is working fine but no wireless on my 2 laptops or my IPad. I called tech support again this afternoon 3/2 and after about 45 minutes of the tech taking over my computer he comes to the conclusion that the router need replaced. So Router number 3 is on the way. I will update the forum once the new router arrives.

Similar Messages

Wireless has stopped working on my Apple TV. What can I do with it?

All of a sudden my 20 month old Apple Tv stopped working with Wireless. Doesn't see the network at all. Tried restting but no luck.
I can either try and convince Apple to replace this (unlikley even with the UK's consumer protection legislation) or come up with another way to use this.
So I wondered if I connect the Apple TV via Ethernet and connect it to my Hi-Fi, could I use a remote control app on an IOS device to play iTunes files etc? I don't have a ethernet outlet near to the TV but there's one close to the Hi-Fi. To be honest the Apple TV is not used that much and I think I might get more use out of it setup as an audio streaming device. I could buy a pair of ethernet mains devices, but seems a waste to conenct a device that's not used that much.
Jim

I knew that, my question was more about the viability of using the ATV without having a TV connected and contolling it directly from an iPad to stream music.
Jim

Wireless has stopped working on my old G3

I've had my ibook, with the same airport card, for 5 years. For the past couple months my wireless signal has been dropping out. I know it isn't the airport express I use b/c my imac has no problem with the wireless signal. I kind of figured that the antenna was being pinched in the hinge, as when I moved the screen back and forth I would get my signal back. This worked pretty well, as long as I held the screen at a certain angle.
Tonight it has dropped out altogether. It just died. I checked my system profile and my ibook is recognizing the airport card, but I don't get a signal at all, no matter how much I open/close/reboot etc.
So I am wondering what my options are. Of course my applecare is long gone. I already sunk $200 into this ibook almost exactly a year ago for a new harddrive, and I figured I would try to use it as long as I could. How much is it to get the antenna problem fixed? Does it make sense to try to do that, or to somehow find money for maybe a macbook (totally out of my budget right now). I just need the ibook for wireless internet/email so spending $1000 to get something new for that seems silly when this computer is still basically working great (other than the wireless).

Jon Spaulding of Small Dog Electronics writes about fixing the AirPort antenna here:
http://www.smalldog.com/newsarchive/techtails_display.php?id=218
The only way to tell for certain how much it would cost is to call and ask.
To find an Apple Authorized Service Provider, enter your Zip Code into the search box on this page:
http://www.apple.com/buy/locator/service.html
Good luck.

Wireless has stopped working on 6-month-old G770

I have a G770 running Windows 7 Home Premium that is about 6 months old. About a month ago, the wireless network access cut out suddenly. I can still connect to the network with an Ethernet cable, but I have no wireless access. When I remove the Ethernet cable, the wireless network icon is displayed with a red X through it, and I receive the error "Not Connected - No Connections are Available."
The wireless/Bluetooth switch on the front of the machine is set to "on," and the wireless network card is turned on in the Wireless Device Settings.
I have tried updating the drivers for the Atheros AR9285 Wireless Network Adapter, but I am told my drivers are up-to-date.
I've also disabled and then re-enabled the Atheros AR9285, and uninstalled and re-installed the drivers, but I still have no wireless access.
Do I need to purchase a new wireless network adapter? If so, where can I do so? I've read that the BIOS settings won't allow me to install a non-Lenovo wireless network adapter, but I don't have the option of purchasing an Atheros AR9285 on the Lenovo site.
Any help would be greatly appreciated. Thanks in advance!

Gin,
Yeh, it's starting to sound like a hardware problem. There were a few threads around here that said that the antenna connectors were loose. You could check that. You could make sure that the screw is holding the card in place. Maybe clean the card contacts with a pencil eraser.
You still have warranty left, right?
If you want to take the cover off and look at it, here's your Hardware Maintenance Manual . Page 41 shows the card.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

Hello:
Try resetting the SMC and PRAM.
Barry

Thinkvantage "access connections windows wireless service" has stopped working

My new computer is a T400 running Windows 7 (lenovo disk installed after purchase) .
While it still connects to the internet through the Windows(?) "open network and sharing center the Thinkvantage Technologies "access connections windows wireless service" has stopped working. It worked fine for a while (4-6 weeks).
Any ideas on how to get it started again?
Thanks
John

Thank you for your reply. I'm just not sure what "it" to uninstall or where to get the new "it" to download. Would you mind adding those details for me? I appreciate your help
John

My PC is communicating with my HP C309a wirelessly, but the Hp solution Center has stopped working.

My PC (Dell XPS 9000) is communicating with my HP C309a wirelessly for printing, but the Hp solution Center has stopped working. Shouldn't I be able to use all functions wirelessly?
I'm getting an error message "HP Solution Center cannot run because your device installation is not complete. Please plug in the usb cable or re-run the set-up program from the instattation CD for a network installation." When I put the installation disk in to remedy the problem, it tells me that my present software is the latest so it won't update. When I go to the update center, it tells me I have the latest software.
This question was solved.
View Solution.

Hi,
Try these:
Click Start Menu icon>Programs>HP>HP Photosmart c309a>Add a Device
With this, it will find the wireless printer and reconfigure the settings; simply follow the prompts. After completion, try to reopen HP Solution Center.
Kiko

Pro L10: After using a wireless mouse, the touch pad has stopped working

Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. On start up the touch pad icon shows and the touch pad operates intermittently, after a few minuets the icon disappears and the touch pad stops functioning. In the control panel/mouse & or device drive I can the program operating and then disappears.
I have removed the software and reinstalled to no avail. On occasions I get a message to say that another pointer is in operation.
Can you help?

Hi
It seems that the wireless mouse or the wireless mouse drivers/software has a bad influence on the touchpad.
I dont have a proper solution for this issue. Well, you can check the Toshiba driver page for newest driver updates. If the updates doesnt solve this issue so I suggest to use either the wireless mouse and disable the touchpad with the key combination FN+F9 or to use a common USB mouse.
I assume that you dont have any problems with a common USB mouse.

Satellite L770 - ethernet adapter has stopped working

HI
I have three laptops all connectable to my home hub, but I seem to be having serious problems with the latest model, the L770-13D. The signal strength has never been as good as the older models and just recently the Ethernet adapter has stopped working. I've updated drivers on both adapters but it hasn't made any difference. I've just recently upgraded my connection and I'm wondering whether the Ethernet adapter is not correctly configured since it was working alright prior to the upgrade.
I've also tried just about every test that I can do - The Toshiba config doctor returned a FAIL on the hardware check I did, but the device manager reports that both network adapters are working OK. Also, the troubleshooting of the wireless adapter reports that there 'may be a problem' The evidence seems to be pointing towards a hardware problem with this laptop.
Any thoughts?

HI Dr Lamp,
No I haven't tried that probably because I wouldn't know how to do it. I have a full recovery image on the data drive but I'm not comfortable with making any changes to the OS in case I mess things up. I've also got a recovery flash drive. Really, I'm out of my depth when it comes to making these sort of changes - I just thought that there may be something very simple that I'd overlooked. The machine is still under warranty, so I'll probably take it to a local computer specialist for diagnosis before involving Toshiba. If it's more than a software problem, they should earn their fees by repairing it. If you involve them and it isn't a hardware problem, they will bill you for about 80 plus carriage, so I'm naturally reluctant to do that. Also, you have to hang about waiting for delivery and collection. It may better to buy a USB/LAN adapter for about 20. Thanks for reply, anyhow.

Pavilion G7 wireless adapter stopped working and now will no longer boot.

I bought a Pavilion G7 about 7 months ago.
After a couple of months, the wireless adapter stopped working, it just disappeared from the Device Manager (Win7 Home).
I reset the computer to factory settings and it fixed that problem.
One month after this, the wireless adapter problem returned, I tried to use system recovery to restore it to a previous point, no luck.
I closed the laptop after this, didn't turn it off.
Opened it up and decided to watch a video I had on there, I had to pause the video halfway through (used Windows media player). Came back to continue watching and the screen was black. No lightbar activity, just blackness.
I pressed a few buttons, nothing.
Decided to do a hard reset (hold the power button for 8 seconds) then I left it and turned it on again, the blank screen returned, no signs of life, no boot, no HDD activity, nothing. The caps lock button was on, the wireless light (of course) was orange.
What on Earth has gone wrong? What can I do to fix this?
Thanks.

Hi
You have a couple of options as I see it please find the web link given below might help you fix the issue.
Solve Setup and Internet Connection Issues on a Wireless Network with Windows 7
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

How fix "Adobe Photoshop CS6 has stopped working" error in Win7?

Hi All,
I’m getting the following error message when ever I try to use Move Tool and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Video card driver is updated.
Please see the following error event.
Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61c045
Faulting module name: aticfx64.dll, version: 8.17.10.1047, time stamp: 0x4cabd6c0
Exception code: 0xc0000005
Fault offset: 0x000000000002f5bf
Faulting process id: 0x15ac
Faulting application start time: 0x01ce2110508d2fb6
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
Faulting module path: C:\Windows\system32\aticfx64.dll
Report Id: fe57fe44-8d03-11e2-bd6c-dc0ea14b01df
Please advise what is the problem? and How to sort this out
Your help is highly appreciated.
regards

that's the details it shows.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2527 MHz
Built-in memory: 3891 MB
Free memory: 1350 MB
Memory available to Photoshop: 3306 MB
Memory used by Photoshop: 5 %
Image tile size: 128K
Image cache levels: 4
Photoshop crashed on 15/03/2013 at 00:05:05 (GetImageViewResourceSharingGLContext)
The GPU Sniffer crashed on 15/03/2013 at 00:50:52
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
No video card detected
Serial number: 92628701192123445467
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Khan\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 298.1G, 254.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Sumi-e 13.0
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

My apple TV has stopped working completely. Just a flashing Amber light

My Apple TV has stopped working. When it is turned on I just get a flashing amber light and it does not turn blue as normal. It doesn't connect wirelessly to my Mac and it doesn't connect to the TV. I do not get the setup menu and it is totally unresponsive to the remote control. I have tried connecting it directly to my Mac but this also does nothing. I am at a loss as to what to do next. I have a lot of films and music stored on it and I am worried that I have lost it all. I am not sure which generation it is, but it is the silver one, model number A1218. Can anyone help?

Unfortunately, it sounds as though your Apple TV 1 has failed. Unlike the later Apple TVs, you cannot connect it to iTunes to restore it.

Spoiler has stopped working message appears when trying to print Gmails

When I try to print my Gmails from my Galaxy S5 mobile phone wirelessly I keep getting Spoiler message has stopped working message appears.
I am not very technical and can only use a touchscreen device as I am a Disabled Lady so need help desperately but need dummy language please.
It scans okay.
PLEASE COULD ANYONE HELP ME ASAP AS I NEED MY GMAILS PRINTED BY THIS AFTERNOON.

Hi @dolphinlady13
Welcome to the HP Support Forums. I understand that you are getting a message indicating the ‘spoiler’ has stopped working.
To better assist you, would you please provide some additional information?
Are you using the HP ePrint app to print the emails? If no are you using an HP app to print the emails?
Do you still get the same message after you have turned the phone off, waited a full minute and then turned the phone back on?
Have you tried the solution suggested on the Android Central Forums in the thread titled cloud print. print spooler on kitkat since the Galaxy S5 runs an Andorid operating system?
Thank you and I look forward to hearing from you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I get the following message: Mozilla Firefox plugin-container has stopped working properly. What do I do?

the message:" Mozilla Firefox plugin-container has stopped working properly" appears regularly in my maintenance center. I am on Windows 7 and Firefox 3.6.17

I had the same type of failure. It was caused by a FF upgrade from V4 to V9.1. Dearing 1955 did not say what version caused the problem. My USB ports started acting up. I could not install the Webcam that was installed before. The HP Scanner of my OJ 8500 stopped working (USB). Did get it to work via Wireless. Removing FF did not clear the problem. Believe I have infected USB driver now.

Blackberry Desktop Software has stopped working

Blackberry Torch 9850 on the Verizon Wireless Network
Blackberry OS: 7.1 Bundle 1737 (v 7.1.0.580, Platform 5.1.0.429)
Windows 7 Home Premium, SP11 with an full admin account
HP Desktop computer
For some unknown reason whenever I attempt to execute Blackberry Desktop Software version 7.1 the application returns the following error: "Blackberry Desktop Software has stopped working: A problem caused the program and notify you if a solution is available." The last successful use of DM was on Sunday, October 7, 2012 when I synched my phone and did a backup of the device.
I have uninstalled and re-installed the application; uninstalled Microsoft .Net Framework version 3.5 and 4.0 then re-installed .Net Framework; then re-installed DM under a new admin account and still getting the same problem. I even went as far as uninstalling Office and re-installing office and still getting the same problem. Whenever I uninstalled DM I did a manual uninstall where I removed all registry keys associated with Research in Motion including folders and still getting the same problem. I Googled the error and the articles worth reading I have already the things they mentioned.
NOTE: I have done a lot more troubleshooting that is listed. But since I did so much to get this to work it will take me an entire novel to list all the things I have done to get this app to work again.
Called VZW and they got me in contact with RIM. RIM did pretty much the same things I did and after spending 7 hours on the phone with them they concluded I need to reformat my drive. When the tech made that suggested I wanted to reach thru the phone and knock her teach out of her mouth. Suffice to say I am not able to get DM to work on my machine and there appears to be no apparent reason why the software will stop working. Not have DM work means I cannot synch my phone. I have one personal computer and I am not going to install DM on my laptop because it will do me no good since I need to synch it with Outlook which is on my personal desktop. I cannot install my personal copy of office on my work laptop because it will probably cause other issues.
Anyone have any suggestions how I can get this application working on my desktop. It was working before and all of a sudden it stopped working

http://www.blackberry.com/btsc/KB02206
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Actiontec wireless has stopped working

Similar Messages

Maybe you are looking for