Activate GL account field in IW31

Hi,
My issue is similar to what is mentioned in the below link:
GL Field required in MIGO for Movement type 261
In IW21, 'Components Tab' the required materials are mentioned and system automatically creates a Reservation. User then issues the reserved material either using MIGO or MB1A against the particular Order. However there is no option to manually enter the GL account to which we want the cost to be debited.
I noticed that there is a configuration path in SPRO to 'Define Field Selection for Components (PM and CS)' which shows the list of modifiable fields. In this list GL account is shown, but can't find it in IW21 - 'Components Tab'.
Please advice.
Regards

Please see below screen shots.
Non Stock item has been maintained. For that, G/L account has been made as Display only.
It reflects in Purchasing data.
As mentioned here many times, only for non stock item, you can control G/L account.
For stock item, you will not get Purchasing data tab, so you have no option to maintain G/L for stock item.

Similar Messages

  • How to activate email account setup on ipad. "Accounts" field in Settings window is inactive.

    I am unable to connect to my email server from an ipad. In Settings->Mail, Contacts, Calendar -> Accounts fields are inactive (connected account field, "Add Account" field and "Fetch New Data" field in light grey).
    Wi Fi works, internet access works. Reseting (turning off and on) the ipad doesn't work.

    The account settings are stored in ~/Library/Mail/V2/MailData/Accounts.plist
    So try again with Time Machine.
    Browse to the MailData Folder, open Time Machine (click  in the toolbar
    and select Enter Time Machine) the go back to a time before the Accounts.plist file was changed and click Restore.

  • How to activate FM Account assignment in Sales Order

    Dear All,
    How to activate FM Account assignment in Sales Order at item level in account assignment category.
    Plz provide some solution for the same.
    Thanks & Regards,
    Pankaj

    Hi,
    Thanks for your reply.
    I am not asking of account assignment group for material.
    My problem is when i am creating Sales Order at item level in Account assignment category there is one field for Fund Mangement account assignment grp.
    I want to activate this field and i have to enter FM area in that field.
    Plz send some solution for the same.
    Thanks & regards,
    Pankaj

  • Disable GL Account Field for editing in the Shopping Cart SRM 7.0

    Hi,
      We would like to disable the GL Account field for editing only on the Shopping Cart Approval Screen. I tried to implement this through configuration of Metadata Dynamic Class in SPRO->SRM Application Server ->Cross Application Basic Settings->Extension & Field Control ->Configure Control for Fields of substructure. But the class is not getting triggered.
      Any help would be appreciated. We are on SRM 7.0
    Thanks
    Raghav

    Hi Rohit,
    Try to activate the view and component and then see. If this does not works, create an enhancement for the view and write the below code in method WDDOMODIFYVIEW
    DATA btn_confirm TYPE REF TO cl_wd_button.
      btn_confirm ?= view->get_element( 'AUTO_CONFIRMATION' ).
      if btn_confirm is BOUND.
        btn_confirm->SET_TEXT( value = 'Confirmation' ). 
      endif.
    This code will set the button text as 'Confirmation' .
    Regards,
    Anubhav

  • Disable G/L Account field in Account Assignment tab of ME22N

    Hi experts,
    My requirement is to disable G/L account field in account assignment tab of ME22N. Tried using badi ME_PROCESS_PO_CUST.
    I have searched forum for the same and tried out some solutions. But was unable to disable the field.
    Any help in this regard would be highly appreciated.
    Thanks in Advance.

    Hi farhan,
    Go to SHD0.
    write tcode : ME22N.
    Then write a transaction variant with Z..XYZ (Any name)
    then click on create. it will open Me22n screen.
    Then go to Account assignment category and simply come back it will record that screen.
    it will ask to give screen name just give it.
    then there is a chk box for OUTPUT ONLY. click that for GL Account.
    and save it and come to SHD0 screen.
    then in STANDARD VARIANT tab, activate that transaction variant u created.
    Now chk tcode ME22N. it will reflect.
    REMEMBER: after transporting to Quality or Production server, u have to activate this variant manually.Otherwise it will not reflect.
    Regards,
    Ankur.

  • Account field required for some users, not for others in URM when checking

    I am running into a real show stopper. I have been working in our development database, and have tested checking in content multiple times with no problems. I recently turned it over to my users to begin testing and they can not even check in one document, because they receive an error stating that the account is required. I know just enough to be dangerous, so I am not quite sure how to solve this one. It makes no sense to me that on my check in screen, account is not required and yet on all of my users check in screens, not only is it required, but nothing they enter is accepted as a valid value, so they can't even get past it. I would just as soon not have account show up or be required, but have struggled with making that happen, since it is not a custom metadata field. It appears to be a delivered field used for security purposes? any help would be appreciated! Thanks.
    One more thing that I noticed that may be helpful in diagnosing this is that my profile has no accounts, just #none,#all
    whereas the user's profiles have a number of different accounts listed in their profile. Could this be part of the reason that they are forced to enter an account when checking in content and I am not?
    If so, how can I get around this?
    Edited by: user10985708 on Apr 7, 2009 12:21 PM

    That´s a little strange behaviour becouse normally the account field is not required as default.
    You could try a global rule setting the Account field not to be required with some IDOC.
    But as you say you´re not using accounts anyway i´d suggest removing it from your server instance.
    In the server\config\CONFIG.CFG file look for UseAccounts=true set it to false and the field won´t bother you anymore.

  • Populating the G/L account field based on Material in the SC

    HI aLL,
       We are runnin on SRM 4.0 (classic).I have a reqt wherein the G/L account which comes in the "Cost assignment details" should be populated at run time (when items are added to SC) based on the material no/Product ID....
      I found out a BADI...BBP_DETERMINE_ACCT which is used to determine the G/L account but not sure at whci point this  BADI is triggered...i  inserted a poup message in a sample implementatiuon of this BADI..but it doesnt show me the popup message when i click on the "ADD TO SHOPPING CART" button on teh SC creatio screen wheerin i can test that this is the BADI which i s called at teh time items are added to teh SC and will populate the G/L account field with teh  proper value form teh backend.
      Also for the G/L account value for the Material,is there any std table which stores the link between  product/valuation class and G/l account in SRM itself  so that my RFC call to teh backend is saved in this BADI implementation??
    regards,
    Disha.

    Hi Disha
    Not sure if I understood you right. I've implemented this BAdI BBP_DETERMINE_ACCT and it works fine so far. I can add an item to the SC and then go to the item details to see the accounting data. There the G/L account corresponds to the one that was determined at run time by the BAdI implementation.
    The standard table in R/3 backend is T030. For described requirements (no known material id) you have to specify a product category. Valuation classes can be assigned to product categories in table T023 (in R/3 backend as well).
    Unfortunately the SRM standards do not take into account the standard account determination as it is known and working in R/3 systems. For this you'll have to implement the BAdI BBP_DETERMINE_ACCT.
    Maybe this thread is of interest for you?
    How to have backend account determination working SRM
    HTH
    Renaud

  • I have downloaded viber on my iphone 5.  i cant activate my account because it says that i have to turn on my push notifications, which i have triple checked.  i have also tried deleting the app and redownloading.

    i have downloaded viber on my iphone 5.  i cant activate my account because it says that i have to turn on my push notifications, which i have triple checked.  i have also tried deleting the app and redownloading.

    Hi,
    This is an official representative of Viber Media.
    Please try to uninstall>reinstall Viber, make sure you have the latest version available (2.3)
    Viber requires all Push Notification settings to be enabled. Otherwise, it will show the error message requesting to do so. In addition, another possible cause for this problem might be the fact that your iPhone is jailbroken/hacktivated, and that interferes with Push Notifications in your iPhone. Our support team might be able to assist you further with this issue - please thoroughly read this page in our official Help Desk: http://bit.ly/uRG1Dw
    (At its bottom you may contact our Support Team if the solutions outlined in it were not sufficient).
    For more questions or technical support, please visit our official HelpDesk.
    Thanks,
    Viber

  • How to use "Mail Merge for Word" to include only Account fields?

    We're attempting to use the Mail Merge for Word template to create a document containing several fields from the Account object. We do not need any fields from the Contact object, and there are many contacts linked to each account.
    When choosing "Get On Demand Data > Accounts", removing all the [Contacts] fields, selecting the necessary [Accounts] fields, then clicking "OK", a "List Download in Progress" window appears, followed by one that says "Microsoft Word - Subscript out of range". None of the [Accounts] fields are available in the downloaded data.
    Can anyone tell me how to include the appropriate Account fields without any Contact fields (which pulls a separate Merge record for every Contact linked with the selected Account)?
    Thanks.

    Thanks for trying to help with this.
    So far, we've been unable to pull even a SINGLE account record. So the problem is not related to data volume limitations. The tool seems to require that Contacts are selected, but for this application we only want a single merge document per Account.
    If anyone else has had success using the Mail Merge for Word tool to pull only Account data, please give us your guidance. Thanks.

  • When I tried to click on link in email sent to confirm my email address, got error "something is wrong...unable to activate your account".

    When I tried to confirm my e-mail address by clicking on the link in the e-mail after submitting a question on at this very help site, I got the following message:
    Firefox Help
    Welcome, sdsutherland1.
    Dashboard | Sign Out
    Something is wrong
    We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address.
    I was able to log in to this site but what do I do now?
    I have copied and pasted the e-mail body here:
    Please confirm your Firefox Help question
    Hi sdsutherland1,
    Before your Firefox Help question (Firefox is not inserting my passwords after I go to Tools/Options/Security and check "Remember Passwords for Sites".)
    can be seen by our support community, you need to confirm the
    account you just created by clicking on the link below:
    https://support.mozilla.com/en-US/users/activate/b2e421e53baaa2edc9f16143474f2cf1323f4a70
    If you did not ask a question or changed your mind, simply delete
    or ignore this email; you will not receive any more email from
    us.
    Thanks again for asking the question -- we're sorry you're having
    trouble with Firefox, but our community of volunteers is looking
    forward to helping you get it resolved as quickly as possible.
    As you may know, Firefox Support (like all of Mozilla) is
    community powered -- help is provided by users like you! Want to
    take part? Browse other users' questions at
    https://support.mozilla.com/questions?filter=unsolved -- you might
    just make someone's day!

    It is a phishing attempt. Do not respond. Do not divulge any personal or financial information. You can use the address below to forward the suspect email message to Apple.
    [email protected]
    The link below has information to help identify fraudulent emails.
    http://support.apple.com/kb/HT4933

  • Disable G/L account field in Shopping cart screen

    Hi SDN,
    I am ABAP Developer and new to the SRM system, I got a requirement to disable G/L account field in the Shopping cart creation screen and overview screen and also I have to disable  the message that is triggered when the G/L account field not entered .
    Please guide me to achieve this requirement.
    Thanks in advance,
    Srinivas D.

    Hi,
    I guess you use current SRM 7.0 version.
    You can control the field visibility by Meta Data customizing. SRM -> SRM Server -> Cross-Application Basic settings -> Extensions and Field Control(Personalization) -> Configure Field Control.
    Regards,
    Masa

  • I have a problem in activate Alaaclaud account and I can not open the device

    السلام عليكمI have a problem in activate Alaaclaud account and I can not open the device

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • HT1222 I got disconnected after the release of the last update! I'm disconnected only from the app store and itunes. Do i have to update to activate my account? What to do, i'm stuck.

    I got disconnected after the release of the last update! I'm disconnected only from the app store and itunes. Do i have to update to activate my account? What to do, i'm stuck.

    Have you restarted your phone?
    If so, try a reset. Press and hold the home & sleep/wake buttons until the screen goes blank, ignoring the power off slider if it comes up.
    Check for the app again after the phone starts back up.
    ~Lyssa

  • GL account field Not Updated in Special Purpose ledger

    Hi Experts,
    We are using 4.7 Version in which we found difference in particular Month difference between FS10N and GD13 and GD20 Line Items of Particular Leder.
    We Observed that the Documents are posted but , without being updating the GL Account field column. GL account field column is Blank and Hence it has not been carryforward to Subsequent years.
    Our Questions
    1) How It had happened,  becase all the documents are updated except the 2 documents .
    2) Is there any way to update GL account field in the Mentioned Documents.
    3) Or do we need to Reverse the document and post again. 
    How to proceed on this issue.
    regards
    N.Kumar

    I cannot answer question 1 but I can shed some light on the following ones.
    There are methods to identify and correct Special Ledger document inconsistencies. Usually when I have SPL inconsistencies (such as a blank fund in the SPL document), It is caught quickly and I take the action to reverse the source document and re-post again. That would be my suggestion to follow if at all possible for your two documents.
    If you take a look at notes 764523 and 697068, you will see the reports used to analyze and correct the inconsistencies. Read the notes thoroughly and look at report RGUREP13 in particular.
    If your issue is re-occurring then you should get SAP to look into the matter via OSS and perhaps they could determine the cause.

  • HT1933 How do I re activate my account.

    I want to re activate my account but don't know how.  Please help.

    You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    If it then works on your computer's iTunes but not your iPad then try logging out of your account on the iPad by tapping on your id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on it
    If that doesn't fix it then you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Maybe you are looking for