Step failure causes sequence failure Option

Hi !
I need some clarification about the Step failure causes sequence failure Option , I'm using TS 4.2 Under Win XP .
Lets say i have a Seq with 4 steps in all of then Step failure causes sequence failure Option is Checked .
Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? and will it record the result for this steps ?
Thank U .
Kobi Kalif
Software Engineer

Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? YES
and will it record the result for this steps ? YES
What this is signifying, is if a Step fails then when the Sequence has completed and returned back to the caller the status of this step will be FAILED.
If you need to jump to Cleanup then you will need to set the Post Action.
regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

Timer expiry to cause sequence failure

Hi,
I would like to cause a sequence to go to cleanup and the result to fail after a timer has expired.
At the moment in the 'Post Conditions' of the timers I have specified a custom condition expression: Step.Result.TimeoutOccured
On condition True: Go to Cleannup
On condition False: Go to next step.
How would it possible to modify the result to fail once the timer has expired?
Many thanks,

Hi feb,
Just had a look around the forums. Without a bit more information I'm not able to answer the question but maybe these posts will help you out?
http://forums.ni.com/ni/board/message?board.id=330&message.id=2605&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=330&message.id=4915&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=330&message.id=1982&requireLogin=False
Hope these help.
Is there any chance (if this doesn't help, you could forward on some of your code and I could have a closer look?)
AdamB
Applications Engineer
National Instruments
Applications Engineering Team Leader | National Instruments | UK & Ireland

Blackberry storm system failure causing battery failure

hello
hoping someone can help me i have two blackberry's now due to having to buy one of a friend but my initial blackberry storm has developed a system issue i went online and found it could be the system has simply failed so i used blackberry software to renew the system prior to that day i bought a brand new battery for the storm and it was working fine for roughly two hours then all of sudden after two hours with the new system the battery died i was just wondwering what can i do to repair this with out to much cost ???????

If you delete the app then reinstall it, that should take care of the issue. If not, post back and we'll look at other options.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Reading Configure- Station Options- Immediately Goto Cleanup on Sequence Failure Checkbox Setting

In TestStand 3.5, how do you programatically read the status of the Configure->Station Options->Immediately Goto Cleanup on Sequence Failure checkbox? How would you programatically set this value?
Solved!
Go to Solution.

Thanks for the reply, but I tried your suggestion and it cannot resolve the reference. When I typed in Engine. it was immediately replaced by RunState.Engine. so I used RunState.Engine.StationOptions.AlwaysGotoCleanupOn Failure. When the step was executed, there was an error stating "Unknown variable or property name RunState.Engine.StationOptions". When I go to the context tab, I see the Engine object, but I cannot expand to see what elements it contains. Any further suggestions? How does one find out what "Engine" contains anyway?

Where is "Immediately Goto Cleanup on Sequence Failure" stored?

1. When I set "Immediately Goto Cleanup on Sequence Failure" on the Station Options dialog, where is that property stored? I want to have the process model set it and not let operators set it.
2. If I am running the Batch model, and one socket fails, what is a good way to terminate the other socket(s), or make the other socket(s) jump to their own cleanups?
Thanks,
cc

Hello cc,
For your first question, you can use the TestStand API to set the Engine.StationOptions.AlwaysGotoCleanupOnFailure property to True. This has the same affect as setting the Station Options manually.
You second question is more tricky. One way that you can have the other TestSockets go to their clean up is by sharing a FileGlobal. If one TestSocket fails, then it would set this variable to true. Then all of the other TestSockets would check this variable before each step to see if there is an error; if so, then they would branch to clean-up of that sequence. You will most likely want to use the ProcessModelPreStep and ProcessModelPostStepFailure Engine callbacks in your process model. They will fire at the appropriate time in your client sequence file (not in the process model where you defined them). I hope this helps. Have a greay day!
Best Regards,
Software Engineer
Jett R

How to terminate on Sequence Failure?

HI,
I would like to terminate the test upon a sequence failure. However ONLY from sequences called by the MainSequence!!
I tried to set in the PostAction --> Terminate on Fail, but it didn't stop?!
Can you recommend a way to accomplish it?
Also, I would like to see a Failure mark (red FAIL) on the failed sequence (if possilbe)
Thanks
Rafi

Rafi,
i tested your request and most of the things are working just as you request them:
- A failing step configured as Post-Action Terminate at Fail will terminate the execution.
- A sequence terminating by this action will get the result "Terminated"
What does not work as you (seem to) desire:
- The execution will never instantly stop, not with termination nor with abort.
- The result "Terminated" is displayed in a dark blue box within the Sequence Editor. There will not be the result Failed for the subsequence.
The execution will never instantly stop because TestStand always waits until possible active modules have finished. If you use the default SequentialModel, this method of temination should instantly initiate the termination procedure. Within this procedure though, all steps in the "Cleanup"-stepgroups are called going up the callstack. This is an important feature which cannot be changed.
Regarding your failure mark: do you use an UI other than the Sequence Editor?
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Sequence failure

Hi All,
Pls anybody help ,what would be output of STEP-5*:
Step-1:
CREATE SEQUENCE seq_test
MINVALUE 1
START WITH 1
INCREMENT BY 1
CACHE 20;
Step-2:
SELECT seq_test.nextval FROM dual;
--output - 1
Step-3:
SELECT seq_test.nextval FROM dual;
--output - 2
Step-4: system failure occurs
Step-5:
SELECT seq_test.nextval FROM dual;
--output - ??

What sort of "system failure" do you mean? Is it just an error occured and rollback was issued? Is it the session ending? Is it the database server being restarted?
You have caching on your sequence so there's a possibility you will get a gap depending on the nature of the failure.
If you're looking to create gapless sequences, then think again as it's not possible to guarantee a gap free sequence even if the caching is disabled from the sequence.

RMMR1MRS-When run in background cause update failure errors looking

hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.

Have you found a solution already? If so, please, share it with the community and close this thread.

[svn] 4950: * Fixed some junit test failures caused by revision 4939.

Revision: 4950
Author: [email protected]
Date: 2009-02-13 08:31:33 -0800 (Fri, 13 Feb 2009)
Log Message:
* Fixed some junit test failures caused by revision 4939.
tests Passed: checkintests
Needs QA: YES
Needs DOC: NO
Bug fixes: SDK-19299
API Change: NO
Reviewer: Darrell
Code-level description of changes:
Modified compile() by moving check for no inputs above the call to
recompile().
Modified link() to only call FileUtil.getCanonicalPath() if the
output is not null.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19299
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java

Seq File Post Step Runtime Error and Failure

Hi,
I am using SequenceFilePostStepRuntimeError   &    SequenceFilePostStepFailure
in my seq file to handle both.
the issue at hand is that, once there is error the execution runs to runtime-error (SequenceFilePostStepRuntimeError) thats fine then again i run my Test-Step & error is generated & it again jumps to runtime-error { Test-Step is a Pass/Failtest}
but after that it jumps to SequenceFilePostStepFailure. I want to avoid this. can I reset the flag which says that no PostStepFailure ?.
    In my Runtime-error step I also change the "Parameters.Step.Result.Status" to display my custom status .

aparab wrote:
    In my Runtime-error step I also change the "Parameters.Step.Result.Status" to display my custom status .
Do i understand this sentence correctly if a state:
In your SequenceFilePostStepError callback, you change the status of the step calling into that callback because of a Runtime Error (Status: "Error") to the status "Failed"?
If so, it is expected behavior, no, it even is "works as intended".
You can use the TS API to disable the PostStepFailure callback, but you cannot enable this callback in the same step. So it would require an additional step for enabling the Failure-callback again which seems to makes things more complicated compared to NOT setting the step' result to "Failed"....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Hostid change on reboot causes zpool failure to load

Seems every time I restart my Solaris 11 Express PVM the hostid is regenerated thus causing a failure for zfs to load pool 'tank'
zfs: [ID 427000 kern.warning] WARNING: pool 'tank' could not be loaded as it was last accessed by another system (host: solaris hostid: 0x45edf6). See: http://www.sun.com/msg/ZFS-8000-EY
(note: unable to locate msg/ZFS-8000-EY on oracle.com)
'zpool import -f pool' works, but I don't want to hack the service manifests to make this automatically import on reboot.
dom0
Oracle VM server release 2.2.1
Linux <hostname> 2.6.18-128.2.1.4.25.el5xen #1 SMP Tue Mar 23 12:43:27 EDT 2010 i686 i686 i386 GNU/Linux
domU
SunOS solaris 5.11 snv_151a i86pc i386 i86xpv Solaris

Seems like modifying vm config using Oracle Virtual Manager GUI insists on inserting the following line in vm.cfg (as well as deleting my 'phy:' lines):
vif_other_config = []
Problem of 'hostid changing on reboot' persists even after manually removing the above line and using the running vm.cfg is as follows:
cpu_weight = 512
disk = ['file:/var/ovs/mount/A1E890DD6BE34CFF9CB69BCA47ACB4D3/running_pool/sx11/System.img,xvda,w',
'phy:/dev/c7t1,xvdb,w',
'phy:/dev/c7t2,xvdc,w',
'phy:/dev/c7t3,xvdd,w',
'phy:/dev/c7t4,xvde,w',
'phy:/dev/c7t5,xvdf,w',
'phy:/dev/c7t6,xvdg,w',
'phy:/dev/c7t7,xvdh,w',
extra = '/platform/i86xpv/kernel/amd64/unix -B zfs-bootfs=rpool/ROOT/solaris,bootpath=/xpvd/xdf@51712:a'
kernel = '/var/ovs/mount/A1E890DD6BE34CFF9CB69BCA47ACB4D3/iso_pool/be/sol-11-exp-201011-text-x86/unix'
memory = 4096
name = 'sx11'
ramdisk = '/var/ovs/mount/A1E890DD6BE34CFF9CB69BCA47ACB4D3/iso_pool/be/sol-11-exp-201011-text-x86/boot_archive'
uuid = 'd56c89ef-ef4b-40e8-8d68-2a64c86d5f12'
vcpus = 6
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=oracle']
vif = ['bridge=xenbr0,mac=00:16:3E:7A:7F:BF,type=netfront',
'bridge=xenbr1,mac=00:16:3E:4E:2D:1A,type=netfront',
]

Install FormsFT Helper Failure: Cause: Dynamic enable formsFT failed, no any JRE is static or dynamic enabled.

Hi
I just install the OATS 12.4.0.2.129, no problem at all, but when I try to start recording an EBS Functional test, I'm getting this message:
Install FormsFT Helper Failure:
Cause: Dynamic enable formsFT failed, no any JRE is static or dynamic enabled.
I have JRE 1.6.0_45, Firefox 24. I have already run the OpenScript Diagnosis Tool and solve the issues listed, but still have the same problem. Can anyone help me with this?
FYI: When I start record a functional test, no EBS, but Web, I have no trouble.
Regards
Diego L

Hi
I just install the OATS 12.4.0.2.129, no problem at all, but when I try to start recording an EBS Functional test, I'm getting this message:
Install FormsFT Helper Failure:
Cause: Dynamic enable formsFT failed, no any JRE is static or dynamic enabled.
I have JRE 1.6.0_45, Firefox 24. I have already run the OpenScript Diagnosis Tool and solve the issues listed, but still have the same problem. Can anyone help me with this?
FYI: When I start record a functional test, no EBS, but Web, I have no trouble.
Regards
Diego L

[svn:bz-4.0.0_fixes] 20615: fixing the regression failure caused by the nest collection level fix, an actionscript type without remote alias will resolved as " className", we should filter out the special case

Revision: 20615
Revision: 20615
Author:   [email protected]
Date:     2011-03-04 12:11:09 -0800 (Fri, 04 Mar 2011)
Log Message:
fixing the regression failure caused by the nest collection level fix, an actionscript type without remote alias will resolved as ">className", we should filter out the special case
Modified Paths:
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/AmfIO.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

3rd Part Menory Causes Fan Failure

Bought my MBP about 9 months ago and shortly thereafter installed a 1G Ram Module from OWC. 2 Weeks ago my Right hand side fan statred making an awfull racket and then dies. Contacted Apple who had me send it to them. Received my computer last nite. Now remember the only thing wrong with this MBP was the fan. The Hardware Test (Short/Long) run from Disk 1 showed only a Fan Problem. No Memory, Mother Board, Etc. I received the computer back with the Main Logic Board Replaced, Disk Drive Slicked, Memory in a plastic Bag. And the MBP is unusable as received from Apple. Screen goes black, locks up, etc. Tried Reinstalling OSX and it would not complete. I sent about 5 hours on the phone with Apple Tech Support on receiving my MBP back in worse condition than it was sent in for. After going around and around with Apple I got a good tech who said it was a definit hardware issue (Others wanted to first buy Apple-Care for 359 or a 49 version) but since its still falls within one year and also 90 day warrenty if Apple Screwed it up I refused. Finally it will be sent back in to "HOPEFULLY" be fixed this time! Anyways, enogh venting and back to the original question; "Will A Ram Module Cause A Failure To A Fan?" Just one fan by the way the left one worked but upon return they said they replaced both. Thanks for allowing me to vent!! Hopefully this is a fluke on Apple Support since I really miss my Laptop right now!!
Bill......
MBP Mac OS X (10.4.8)

Thanks for the response. Yes I am or was using SMC Fan Control along with iStat in the Dash for moniotring. I work with a lot of PC's and have built my own from MB and Up. Since I am fairly new to Mac but in all my years I have never heard of Memory causing a failure of a Fan. I could as you said believe Kernel Panics or Programs screwing up or reboots for that matter. My assumption is that they did not like the OWC Memory or the addition of Non-Apple Memory. I also find it hard to believe my Main Logic Board all of a sudden (In the Apple Techs Hands) went bad. I can understand maybe the drive being slicked and fans switched in-pairs. But the rest I find really off the wall. I just hope that they can correct the problems right this time since I have been hyping my MBP since I got it and now this is a real show-stopper for me!
Bill......

Step failure causes sequence failure Option

Similar Messages

Maybe you are looking for